Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Parameter estimation using data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,711 records · Page 95

Spent Nuclear Fuel Mechanical Loads in the General Package Drop Scenario

The US Department of Energy Spent Fuel and Waste Science and Technology program is performing research to determine the mechanical loading conditions applied to spent nuclear fuel (SNF) during normal conditions of transportation to inform mechanical tests of SNF and close an important knowledge gap related to the practical disposition of SNF in the US. A recent multi-national collaborative test campaign measured SNF assembly impact response to the 30 cm horizontal package drop scenario, which is a common regulatory basis test of SNF package design. Researchers at Pacific Northwest National Laboratory (PNNL) are using the test data to validate explicit finite element models to calculate the mechanical loads and structural response of spent nuclear fuel assemblies in the as-tested 30 cm horizontal package drop scenario. Once the as-tested package drop model is validated, the next step is to apply the model to the general 30 cm drop scenario, which includes all impact angles, all fuel assembly types, and all burnup conditions. PNNL is developing a damage model that will incorporate the results of finite element parametric studies to establish trends in SNF mechanical loading to various input parameters, like impact orientation and burnup. The damage model will have the capability to estimate mechanical loads for any single set of input parameters, but it will first be used to describe the upper bounds of potential SNF loading in the 30 cm drop scenario. This paper describes PNNL’s progress toward developing the general solution to the problem of spent nuclear fuel mechanical loads in the 30 cm package drop scenario and it describes the next steps in closing the knowledge gap.

Klymyshyn, Nicholas A.↗

THE NANOGRAV NINE-YEAR DATA SET: EXCESS NOISE IN MILLISECOND PULSAR ARRIVAL TIMES

Gravitational wave (GW) astronomy using a pulsar timing array requires high-quality millisecond pulsars (MSPs), correctable interstellar propagation delays, and high-precision measurements of pulse times of arrival. Here we identify noise in timing residuals that exceeds that predicted for arrival time estimation for MSPs observed by the North American Nanohertz Observatory for Gravitational Waves. We characterize the excess noise using variance and structure function analyses. We find that 26 out of 37 pulsars show inconsistencies with a white-noise-only model based on the short timescale analysis of each pulsar, and we demonstrate that the excess noise has a red power spectrum for 15 pulsars. We also decompose the excess noise into chromatic (radio-frequency-dependent) and achromatic components. Associating the achromatic red-noise component with spin noise and including additional power-spectrum-based estimates from the literature, we estimate a scaling law in terms of spin parameters (frequency and frequency derivative) and data-span length and compare it to the scaling law of Shannon and Cordes. We briefly discuss our results in terms of detection of GWs at nanohertz frequencies.

79 ASTRONOMY AND ASTROPHYSICS↗

COUPLING OF RELAP5-SCDAP MOD4.0 AND NEUTRONIC CODES

High-fidelity and accurate nuclear system codes play a key role in the design and analysis of complex nuclear power plants, which consist of multiple subsystems, such as the reactor core (and its fuel, burnable poisons, control elements, etc.), the reactor internal structures, the vessel, and the energy conversion subsystem and beyond to grid demand. Most commonly the interplay between these various subsystems is modeled using coupled codes, each of which represents one of the subsystems. And the most common direct coupling is that of thermal-hydraulics and neutronics codes. The subject of this paper is the coupling of codes that model not only thermal-hydraulics and neutronics, but also structural components damage. Furthermore, the neutronic component is not limited to the sole core solver. The coupled code system encompasses thermal-hydraulics, material performance of the fuel, neutronic solver, and neutronic data preparation. Thus, this paper presents a framework for coupling RELAP5/SCDAPSIM/MOD4.0 with a suite of neutron kinetics codes that includes NESTLE, DRAGON and a version of the ENDF library. The version of the RELAP5/SCDAPSIM/MOD4.0 code used in this work is one developed by Innovate System Software (ISS) as part of the international SCDAP Development and Training Program (SDTP) for best-estimate analysis to model reactor transients including severe accident phenomena. This RELAP5/SCDAPSIM/MOD4.0 code version is also capable of predicting nuclear fuel performance. It uses nodal power distributions to calculate mechanical and thermal parameters such as heat-up, oxidation and meltdown of fuel rods and control rods, the ballooning and rupture of fuel rod cladding, the release of fission products from fuel rods, and the disintegration of fuel rods into porous debris and molten material. On the neutronics side, this work uses the NESTLE and DRAGON codes. NESTLE is a multi-dimensional static and kinetic neutronic code developed at North Carolina State University. It solves up to four energy groups neutron diffusion equations utilizing the Nodal Expansion Method (NEM) in Cartesian or hexagonal geometry. The DRAGON code, developed at Ecole Polytechnique de Montreal, performs lattice physics calculations based on the neutron transport equation and is capable of using very fine energy group structures. In this work, we have developed a coupling approach to exchange data among the various modules. In the coupling process, the generated nuclear data (in fine multigroup energy structure) are collapsed down into two- or four-group energy structures for use in NESTLE. The neutron kinetics and thermal-hydraulics modules are coupled at each time step by using the cross-section data. The power distribution results of the neutronic calculations are transmitted to the thermal-hydraulics code. The spatial distribution of coolant density and the fuel-moderator temperature, which result from the thermal-hydraulic calculations, are transmitted back to the neutron kinetics codes and then the loop is closed using new neutronics results. Details of the actual data transfers will be described in the full length paper.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Estimating epistemic uncertainty in soil parameters for nonlinear site response analyses: Introducing the Latin Hypercube Sampling technique

This study quantifies the effects of epistemic uncertainty in soil parameters on nonlinear (NL) site response analysis (SRA) results, validated against the data recorded at a well-instrumented geotechnical downhole array located in Japan. To this end, a one-dimensional soil column model of the Service Hall Array (SHA) near the Kashiwazaki-Kariwa Nuclear Power Plant (KKNPP) is developed using the finite element (FE) program LS-DYNA. The dynamic stress–strain relationship is characterized by a modified two-stage hyperbolic (MTH) NL backbone curve formulation capable of capturing soil behavior at both small- and large-shear strains. The model is then validated against the ground motion recordings to capture the model bias. The uncertainties associated with the shear-wave velocity profile (a small-strain soil property) and soil shear strength (a large-strain soil property) are incorporated in NL SRA to quantify their separate and joint randomization effects on the results. This study proposes using the Latin Hypercube Sampling (LHS) method as an efficient alternative to commonly used methods, such as Standard Monte Carlo (SMC), to account for uncertainty propagation in such reliability analysis. Both low-intensity and design-level records from the recordings at the SHA are applied to study the contribution of the small- and large-strain NL dynamic soil properties. Results from 46,200 NL FE analyses (23,100 per input motion) are presented. Measured and predicted site response, using recorded ground motions at this downhole array, is compared to assess the significance of soil parameter uncertainty on the observed ground motion dispersions. It is demonstrated that increasing the number of soft realizations and implementing higher level earthquake intensity lead to higher ground motion dispersion. Unlike past studies in randomization of Vs profiles with the SMC method, the LHS method is shown to have no significant effect on the predicted median surface response spectra and amplification factors (AFs) for this case study.

Engineering↗

Rapid imbibition of water in fractures within unsaturated sedimentary rock

The spontaneous imbibition of water and other liquids into gas-filled fractures in variably-saturated porous media is important in a variety of engineering and geological contexts. However, surprisingly few studies have investigated this phenomenon. In this paper, we present a theoretical framework for predicting the 1-dimensional movement of water into air-filled fractures within a porous medium based on early-time capillary dynamics and spreading over the rough surfaces of fracture faces. The theory permits estimation of sorptivity values for the matrix and fracture zone, as well as a dispersion parameter which quantifies the extent of spreading of the wetting front. Quantitative data on spontaneous imbibition of water in unsaturated Berea sandstone cores were acquired to evaluate the proposed model. The cores with different permeability classes ranging from 50 to 500 mD and were fractured using the Brazilian method. Spontaneous imbibition in the fractured cores was measured by dynamic neutron radiography at the Neutron Imaging Prototype Facility (beam line CG-1D, HFIR), Oak Ridge National Laboratory. Water uptake into both the matrix and the fracture zone exhibited square-root-of-time behavior. The matrix sorptivities ranged from 2.9 to 4.6 mm s -0.5 , and increased linearly as the permeability class increased. The sorptivities of the fracture zones ranged from 17.9 to 27.1 mm s -0.5 , and increased linearly with increasing fracture aperture width. The dispersion coefficients ranged from 23.7 to 66.7 mm 2 s -1 and increased linearly with increasing fracture aperture width and damage zone width. Both theory and observations indicate that fractures can significantly increase spontaneous imbibition in unsaturated sedimentary rock by capillary action and surface spreading on rough fracture faces. Fractures also increase the dispersion of the wetting front. In conclusion, further research is needed to investigate this phenomenon in other natural and engineered porous media.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Uncertainty Quantification of Global Net Methane Emissions From Terrestrial Ecosystems Using a Mechanistically Based Biogeochemistry Model

Quantification of methane (CH4) emissions from wetlands and its sinks from uplands is still fraught with large uncertainties. Here, a methane biogeochemistry model was revised, parameterized, and verified for various wetland ecosystems across the globe. The model was then extrapolated to the global scale to quantify the uncertainty induced from four different types of uncertainty sources including parameterization, wetland type distribution, wetland area distribution, and meteorological input. We found that global wetland emissions are 212 ± 62 and 212 ± 32 Tg CH4 year -1 (1Tg = 10 12 g) due to uncertain parameters and wetland type distribution, respectively, during 2000–2012. Using two wetland distribution data sets and three sets of climate data, the model simulations indicated that the global wetland emissions range from 186 to 212 CH 4 year -1 for the same period. The parameters were the most significant uncertainty source. After combining the global methane consumption in the range of -34 to -46 Tg CH 4 year -1 , we estimated that the global net land methane emissions are 149–176 Tg CH 4 year -1 due to uncertain wetland distribution and meteorological input. Spatially, the northeast United States and Amazon were two hotspots of methane emission, while consumption hotspots were in the Eastern United States and eastern China. During 1950–2016, both wetland emissions and upland consumption increased during El Niño events and decreased during La Niña events. This study highlights the need for more in situ methane flux data, more accurate wetland type, and area distribution information to better constrain the model uncertainty.

58 GEOSCIENCES↗

X-RAY OBSERVATIONAL SIGNATURE OF A BLACK HOLE ACCRETION DISK IN AN ACTIVE GALACTIC NUCLEUS RX J1633+4718

We report the discovery of a luminous ultra-soft X-ray excess in a radio-loud narrow-line Seyfert 1 galaxy, RX J1633+4718, from archival ROSAT observations. The thermal temperature of this emission, when fitted with a blackbody, is as low as 32.5{sup +8.0}{sub -6.0} eV. This is in remarkable contrast to the canonical temperatures of {approx}0.1-0.2 keV found hitherto for the soft X-ray excess in active galactic nuclei (AGNs) and is interestingly close to the maximum temperature predicted for a postulated accretion disk in this object. If this emission is indeed blackbody in nature, the derived luminosity (3.5{sup +3.3}{sub -1.5} x 10{sup 44} erg s{sup -1}) infers a compact emitting area with a size ({approx}5 x 10{sup 12} cm or 0.33 AU in radius) that is comparable to several times the Schwarzschild radius of a black hole (BH) at the mass estimated for this AGN ({approx}3 x 10{sup 6} M{sub sun}). In fact, this ultra-steep X-ray emission can be well fitted as the (Compton scattered) Wien tail of the multi-temperature blackbody emission from an optically thick accretion disk, whose inferred parameters (BH mass and accretion rate) are in good agreement with independent estimates using the optical emission-line spectrum. We thus consider this feature as a signature of the long-sought X-ray radiation directly from a disk around a supermassive BH, presenting observational evidence for a BH accretion disk in the AGN. Future observations with better data quality, together with improved independent measurements of the BH mass, may constrain the spin of the BH.

79 ASTRONOMY AND ASTROPHYSICS↗

Determination of dark energy by the Einstein Telescope: Comparing with CMB, BAO, and SNIa observations

A design study is currently in progress for a third-generation gravitational-wave (GW) detector called the Einstein Telescope (ET). An important kind of source for ET will be the inspiral and merger of binary neutron stars up to z{approx}2. If binary neutron star mergers are the progenitors of short-hard {gamma}-ray bursts, then some fraction of them will be seen both electromagnetically and through GW, so that the luminosity distance and the redshift of the source can be determined separately. An important property of these 'standard sirens' is that they are self-calibrating: the luminosity distance can be inferred directly from the GW signal, with no need for a cosmic distance ladder. Thus, standard sirens will provide a powerful independent check of the {Lambda}CDM model. In previous work, estimates were made of how well ET would be able to measure a subset of the cosmological parameters (such as the dark energy parameter w{sub 0}) it will have access to, assuming that the others had been determined to great accuracy by alternative means. Here we perform a more careful analysis by explicitly using the potential Planck cosmic microwave background data as prior information for these other parameters. We find that ET will be able to constrain w{sub 0} and w{sub a} with accuracies {Delta}w{sub 0}=0.099 and {Delta}w{sub a}=0.302, respectively. These results are compared with projected accuracies for the JDEM baryon acoustic oscillations project and the SNAP type Ia supernovae observations.

79 ASTRONOMY AND ASTROPHYSICS↗

Brain necrosis after fractionated radiation therapy: Is the halftime for repair longer than we thought?

Purpose: To derive a radiobiological model that enables the estimation of brain necrosis and spinal cord myelopathy rates for a variety of fractionation schemes, and to compare repair effects between brain and spinal cord. Methods: Sigmoidal dose response relationships for brain radiation necrosis and spinal cord myelopathy are derived from clinical data using nonlinear regression. Three different repair models are considered and the repair halftimes are included as regression parameters. Results: For radiation necrosis, a repair halftime of 38.1 (range 6.9-76) h is found with monoexponential repair, while for spinal cord myelopathy, a repair halftime of 4.1 (range 0-8) h is found. The best-fit alpha beta ratio is 0.96 (range 0.24-1.73)Conclusions: A radiobiological model that includes repair corrections can describe the clinical data for a variety of fraction sizes, fractionation schedules, and total doses. Modeling suggests a relatively long repair halftime for brain necrosis. This study suggests that the repair halftime for late radiation effects in the brain may be longer than is currently thought. If confirmed in future studies, this may lead to a re-evaluation of radiation fractionation schedules for some CNS diseases, particularly for those diseases where fractionated stereotactic radiation therapy is used.

60 APPLIED LIFE SCIENCES↗

Introduction of a novel ultrahigh sensitivity collimator for brain SPECT imaging

Purpose: Noise levels of brain SPECT images are highest in central regions, due to preferential attenuation of photons emitted from deep structures. To address this problem, the authors have designed a novel collimator for brain SPECT imaging that yields greatly increased sensitivity near the center of the brain without loss of resolution. This hybrid collimator consisted of ultrashort cone-beam holes in the central regions and slant-holes in the periphery (USCB). We evaluated this collimator for quantitative brain imaging tasks. Methods: Owing to the uniqueness of the USCB collimation, the hole pattern required substantial variations in collimator parameters. To utilize the lead-casting technique, the authors designed two supporting plates to position about 37 000 hexagonal, slightly tapered pins. The holes in the supporting plates were modeled to yield the desired focal length, hole length, and septal thickness. To determine the properties of the manufactured collimator and to compute the system matrix, the authors prepared an array of point sources that covered the entire detector area. Each point source contained 32 μCi of Tc-99m at the first scan time. The array was imaged for 5 min at each of the 64 shifted locations to yield a 2-mm sampling distance, and hole parameters were calculated. The sensitivity was also measured using a point source placed along the central ray at several distances from the collimator face. High-count projection data from a five-compartment brain phantom were acquired with the three collimators on a dual-head SPECT/CT system. The authors calculated Cramer-Rao bounds on the precision of estimates of striatal and background activity concentration. In order to assess the new collimation system to detect changes in striatal activity, the authors evaluated the precision of measuring a 5% decrease in right putamen activity. The authors also reconstructed images of projection data obtained by summing data from the individual phantom compartments. Results: The sensitivity of the novel cone-beam collimator varied with distance from the detector face; it was higher than that of the fan-beam collimator by factors ranging from 2.7 to 162. Examination of the projections of the point sources revealed that only a few holes were distorted or partially blocked, indicating that the intensive manual fabrication process was very successful. Better reconstructed phantom images were obtained from the USCB+FAN collimator pair than from either LEHR or FAN collimation. For the left caudate, located near the center of the brain, the detected counts were 9.8 (8.3) times higher for UCSB compared with LEHR (FAN), averaged over 60 views. The task-specific SNR for detecting a 5% decrease in putamen uptake was 7.4 for USCB and 3.2 for LEHR. Conclusions: The authors have designed and manufactured a novel collimator for brain SPECT imaging. The sensitivity is much higher than that of a fan-beam collimator. Because of differences between the manufactured collimator and its design, reconstruction of the data requires a measured system matrix. The authors have demonstrated the potential of USCB collimation for improved precision in estimating striatal uptake. The novel collimator may be useful for early detection of Parkinson’s disease, and for monitoring therapy response and disease progression.

60 APPLIED LIFE SCIENCES↗

Applying Particle Swarm Optimization and Extended Kalman Filtering to Model Kaplan Generation Dynamics for Hydropower Systems

Variable renewable generation is increasing the need for hydropower plants to provide fast and flexible grid support, which places new demands on plant-level dynamic models used for monitoring, control, and operational decision-making. This need is especially important for hydroelectric systems, where turbine and generator dynamics are strongly coupled, nonlinear, and time-varying, making accurate real-time representation difficult. To address this problem, this paper develops a digital twin (DT) framework for a synchronous generator–Kaplan turbine system using an explicit separation of slow turbine dynamics and fast generator dynamics. The turbine subsystem is represented by a six-coefficient model, whose parameters are identified offline using particle swarm optimization, while the generator subsystem is updated online through an extended Kalman filter for real-time state and parameter estimation. These models are integrated within a closed-loop simulation that includes a proportional–integral–derivative–double-derivative governor and excitation system, allowing the DT to track plant behavior under realistic operating conditions. Unlike prior studies that treat turbine and generator modeling separately or rely mainly on simulated inputs, the proposed framework is validated using real operational data from a hydropower plant. Results show that the DT reproduces terminal voltage, active power, and reactive power with a normalized root mean square error of approximately 5%. This hybrid offline–online formulation constitutes the main contribution of the work, providing an adaptive and practically deployable DT for hydropower systems with direct relevance to control improvement, performance monitoring, and grid-support applications under high renewable penetration.

13 HYDRO ENERGY↗

Within-Host Phenotypic Evolution and the Population-Level Control of Chronic Viral Infections by Treatment and Prophylaxis

Chronic viral infections can persist for decades spanning thousands of viral generations, leading to a highly diverse population of viruses with its own complex evolutionary history. We propose an expandable mathematical framework for understanding how the emergence of genetic and phenotypic diversity affects the population-level control of those infections by both non-curative treatment and chemo-prophylactic measures. Our frameworks allows both neutral and phenotypic evolution, and we consider the specific evolution of contagiousness, resistance to therapy, and efficacy of prophylaxis. We compute both the controlled and uncontrolled, population-level basic reproduction number accounting for the within-host evolutionary process where new phenotypes emerge and are lost in infected persons, which we also extend to include both treatment and prophylactic control efforts. We used these results to discuss the conditions under which the relative efficacy of prophylactic versus therapeutic methods of control are superior. Finally, we give expressions for the endemic equilibrium of these models for certain constrained versions of the within-host evolutionary model providing a potential method for estimating within-host evolutionary parameters from population-level genetic sequence data.

sensitivity analysis↗

Electrochemical Impedance Spectroscopy and Cyclic Voltammetry Methods for Monitoring SmCl 3 Concentration in Molten Eutectic LiCl-KCl

Molten salt solutions consisting of eutectic LiCl-KCl and concentrations of samarium chloride (0.5 to 3.0 wt%) at 500 C were analyzed using both cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The CV technique gave the average diffusion coefficient for Sm 3+ over the concentration range. Equipped with Sm 3+ diffusion coefficient, the Randles-Sevcik equation predicted Sm 3+ concentration values that agree with the given experimental values. From CV measurements; the anodic, cathodic, and half-peak potentials were identified and subsequently used as a parameter to acquire EIS spectra. A six-element Voigt model was used to model the EIS data in terms of resistance-time constant pairs. The lowest resistances were observed at the half-peak potential with the associated resistance-time constant pairs characterizing the reversible reaction between Sm 3+ and Sm 2+ . By extrapolation, the Voigt model estimated the polarization resistance and established a polarization resistance-concentration relationship.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

A Poisson method application to the assessment of the earthquake hazard in the North Anatolian Fault Zone, Turkey

North Anatolian Fault (NAF) is one from the most important strike-slip fault zones in the world and located among regions in the highest seismic activity. The NAFZ observed very large earthquakes from the past to present. The aim of this study; the important parameters of Gutenberg-Richter relationship (a and b values) estimated and this parameters taking into account, earthquakes were examined in the between years 1900-2015 for 10 different seismic source regions in the NAFZ. After that estimated occurrence probabilities and return periods of occurring earthquakes in fault zone in the next years, and is being assessed with Poisson method the earthquake hazard of the NAFZ. The Region 2 were observed the largest earthquakes for the only historical period and hasn’t been observed large earthquake for the instrumental period in this region. Two historical earthquakes (1766, M{sub S}=7.3 and 1897, M{sub S}=7.0) are included for Region 2 (Marmara Region) where a large earthquake is expected in the next years. The 10 different seismic source regions are determined the relationships between the cumulative number-magnitude which estimated a and b parameters with the equation of LogN=a-bM in the Gutenberg-Richter. A homogenous earthquake catalog for M{sub S} magnitude which is equal or larger than 4.0 is used for the time period between 1900 and 2015. The database of catalog used in the study has been created from International Seismological Center (ISC) and Boğazici University Kandilli observation and earthquake research institute (KOERI). The earthquake data were obtained until from 1900 to 1974 from KOERI and ISC until from 1974 to 2015 from KOERI. The probabilities of the earthquake occurring are estimated for the next 10, 20, 30, 40, 50, 60, 70, 80, 90 and 100 years in the 10 different seismic source regions. The highest earthquake occur probabilities in 10 different seismic source regions in the next years estimated that the region Tokat-Erzincan (Region 9) %99 with an earthquake occur probability for magnitude 6.5 which the return period 24.7 year, %92 with an earthquake occur probability for magnitude 7 which the return period 39.1 year, %80 with an earthquake occur probability for magnitude 7.5 which the return period 62.1 year, %64 with an earthquake occur probability for magnitude 8 which the return period 98.5 year. For the Marmara Region (Region 2) in the next 100 year estimated that %89 with an earthquake occur probability for magnitude 6 which the return period 44.9 year, %45 with an earthquake occur probability for magnitude 6.5 which the return period 87 year, %45 with an earthquake occur probability for magnitude 7 which the return period 168.6 year.

58 GEOSCIENCES↗

Predicting Nanoparticle Suspension Viscoelasticity for Multimaterial 3D Printing of Silica–Titania Glass

A lack of predictive methodology is frequently a major bottleneck in materials development for additive manufacturing. Hence, exploration of new printable materials often relies on the serendipity of trial and error approaches, which is time-consuming, labor-intensive, and costly. In this paper, we present an approach to overcome these issues by quantifying and controlling the viscoelasticity of inks for multimaterial 3D printing of silica–titania glass using direct ink writing (DIW). We formulate simple silica and silica–titania inks from a suspension of fumed silica nanoparticles in an organic solvent with a dissolved molecular titania precursor. We use a small set of experimental rheological data and estimates of interaction potentials from colloidal theory to develop a predictive tool that allows us to design and obtain compatible inks that are matched both in desired rheological properties (viscosity profiles and elastic modulus) as well as solids loading. The model incorporates silica particle volume fraction, particle size, particle size distribution, and titania precursor concentration, and captures the effects of all formulation parameters on the measured viscoelasticity in a single curve. We validate the ink formulations predicted by the model and find that the materials can be very well matched in rheological properties as desired for 3D printing. Using the DIW and heat treatment methods we have reported previously, we use these inks to print and process a fully transparent glass with spatial change in dopant composition and refractive index. Finally, we believe that this approach can be extended to other colloidal systems and allow predictive ink formulation design for desired printability in direct ink write manufacturing.

36 MATERIALS SCIENCE↗

Neural network-based single material beam-hardening correction for X-ray CT in Additive Manufacturing

Beam-hardening (BH) artifacts are ubiquitous in X-ray CT scans of dense metal additively manufactured (AM) parts. While linearization approaches are useful for correcting beam-hardened data from single material objects, they either require a calibration scan or detailed system and material composition information. In this paper, we introduce a neural network-based, material-agnostic method to correct beam-hardening artifacts. We train a neural network to map the acquired beam-hardened projection values and the corresponding estimated thickness of the part based on an initial segmentation to beam-hardening related parameters, which can be used to compute the coefficients of a linearizing correction polynomial. A key strength of our approach is that, once the network is trained, it can be used for correcting beam hardening from a variety of materials without any calibration scans or detailed system and material composition information. Furthermore, our method is robust to errors in the estimated thickness due to the typical challenge of obtaining an accurate initial segmentation from reconstructions impacted by BH artifacts. We demonstrate the utility of our method to obtain high-quality CT reconstructions from a collection of AM parts -- suppressing cupping and streaking artifacts

Rahman, Obaid↗

Artificial neural networks estimate evapotranspiration for Miscanthus × giganteus as effectively as empirical model but with fewer inputs

Estimating actual evapotranspiration (ET) is particularly crucial for addressing how vegetation affects the water balance of ecosystems. ET estimation can be complex with empirical models due to their many parameters and reliance on aridity. In contrast, artificial neural networks (ANNs) could potentially estimate ET with fewer and more common meteorological parameters. In this study, we trained two ANNs, one using a feed-forward approach (FFN) and the other a nonlinear auto-regressive network (NARX), to predict ET and compared them to the commonly used empirical model Granger and Gray (GG). We trained our models on a nine-year eddy covariance (EC) dataset for Miscanthu s × giganteus ( M . × giganteus ) from Illinois (UIEF), then tested them using out-of-sample data from both UIEF and a different location in Iowa (SABR) to compare the accuracy of FFN, NARX, and GG models in estimating daily ET. A combination of air temperature (T a ) and solar radiation (R s ) was chosen as inputs due to the highest R 2 for FFN (R 2 = 0.79, 0.81, and 0.79 for training, testing, and validation, respectively) and only T a for NARX (R 2 = 0.70 for out-of-sample validation). The predictive power of the FFN model was superior to the NARX and GG models at the UIEF site (R 2 = 0.84, 0.70, and 0.83 for out-of-sample validation, respectively). Our analysis showed that ANN approaches are as accurate as empirical approaches for estimating ET but use fewer inputs.

54 ENVIRONMENTAL SCIENCES↗