Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PRESSURIZATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,711 records · Page 95

Variations in the surface chemistry of methanol with CeO 2 (100) at low and elevated pressures

The reactions of methanol with and without O 2 were studied on a flat, highly crystalline CeO 2 (100) thin‐film surface with ambient pressure XPS. In the absence of O 2 , the ambient pressure XPS results indicate that in both low‐pressure (≤10 −5 Torr) and high‐pressure regimes (≥10 −1 Torr), the dominant surface species is methoxy. Methanol decomposition substantially reduces the ceria and C X deposit build‐up on the surface. When O 2 is present, C X does not accumulate on the surface and the dominant surface species is different in the low‐pressure and high‐pressure regimes. Methoxy dominates at low pressure, while formate dominates at the higher pressure. The type of surface species appears to be related to the ability of O 2 to fully oxidize the ceria surface during the methanol reaction.

Mullins, David R.↗

Modelling the development of capillary pressure in freshly 3D-printed concrete elements

3D concrete printing is a promising technology recently developed to automate construction. Since no formwork is used in this technology to support and protect fresh concrete, there are two aspects which considerably accelerate the development of capillary pressure in 3D-printed concrete in comparison to conventionally placed concrete: i) high stiffness of 3D-printed needed to provide sufficient buildability, and ii) very early and fast evaporation of pore water. Accelerated development of capillary pressure may lead to severe plastic shrinkage cracking in 3D-printed elements and, hence, need to be mitigated. This investigation aims at providing a poromechanical model for capillary pressure development in 3D-printed elements. To simulate the development of capillary pressure and plastic shrinkage, environmental factors, material properties, and element geometry need to be considered as a whole. The model inputs – coefficient of permeability, static bulk modulus, air entry pressure and chemical shrinkage rate – were determined experimentally. The model was validated for two fine-grained concretes. Both 3D-printed materials yielded faster capillary pressure increase in comparison to cast concrete, while partial substitution of cement with silica fume further accelerated the capillary pressure development. Furthermore, due to the lower permeability of the mixture containing silica fume, the gradient of capillary pressure between 3D-printed layers increased, as did the gradient of plastic shrinkage.

36 MATERIALS SCIENCE↗

Formation of hydrocarbons favored by high pressure at subduction zone conditions

Subduction zones enable carbon transport to the deep Earth. Inorganic and organic carbon in fluids released from the subducted slab are important in water-rock interactions. However, the potential role of reduced carbon species in fluids during subduction is still unclear. In particular, the pressure, temperature, and oxidation state conducive to the formation of fluid hydrocarbons are poorly understood. Here we focused on the role of pressure influencing the formation of hydrocarbons using diamond anvil cell experiments starting with 0.5 M Ca-acetate solutions over a broad range of pressures, from 1.6 to 4.6 GPa at temperatures of 300 and 350°C. Droplets of immiscible hydrocarbon fluid coexisting with aqueous carbonate or bicarbonate and crystals of calcite or aragonite were formed at peak pressure and temperature conditions in the experiments. Furthermore, greater quantities of hydrocarbons formed at higher pressure as revealed by measuring the in situ volume percent of the droplets. Measurement of the in situ Raman spectra of the co-existing aqueous solutions and analysis of the peak area ratios of acetate to HCO 3 – showed faster decrease at higher pressure, which indicated that the reactions forming hydrocarbons were accelerated by pressure. Compared to previous Na-acetate experiments at 300°C and 3.0 GPa, this study found hydrocarbons that were more methane-rich and had more propane and less isobutane. In experiments at 350°C, isobutane transformed to one or more aromatic hydrocarbons in an immiscible fluid. The air-dried aromatic hydrocarbons were measured using a UV laser, and show peaks of bitumen. Overall, our study supports the hypothesis that high pressures and high temperatures facilitate the possible occurrence of immiscible hydrocarbon fluids in the deep carbon cycle.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Experimental and theoretical investigation into the high pressure deflagration products of 2,6-diamino-3,5-dinitropyrazine-1-oxide (LLM-105)

Diamond anvil cell (DAC) laser ignition experiments and reactive ab initio molecular dynamics (AIMD) simulations were performed on the high explosive (HE) LLM-105 to investigate its high pressure (HP) deflagration chemistry. Raman and optical spectroscopy measurements reveal LLM-105 reacts into an opaque carbonaceous product at 4–25 GPa. At pressures >~ 27 GPa, the reaction product consists of an amorphous optically transparent solid and nitrogen (N 2 ) in the solid phase. While not a one-to-one comparison due to the small time and length scales, the HP AIMD simulations show that some of the product is molecular N 2 , in qualitative agreement with experiment, while above 20 GPa most of the product consists of large amorphous C x H y N z O k clusters. Clustering is enhanced with pressure and reduces with temperature. In the experiments with initial sample pressure >~ 25 GPa, the pressure within the DAC decreases with minimal change in DAC cavity area. At initial sample pressures of 43.9 GPa, when quenched to 0 K, simulations predict a product experiencing a lower pressure consistent with the experimental measurement at lower load pressures. In conclusion, the results are important for understanding the HP deflagration chemistry of LLM-105.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Velocity Crossover Between Hydrous and Anhydrous Forsterite at High Pressures

The elastic properties of hydrous forsterite, Mg{sub 2-x}SiO{sub 4}H{sub 2x}, are relevant to interpreting seismic velocity anomalies in the Earth's mantle. In this study, we used Brillouin scattering to determine the single-crystal elasticity of forsterite with 0.9(1) wt.% H{sub 2}O (x = 0.14) to 14 GPa. Aggregate bulk and shear moduli of hydrous forsterite increase with pressure at a greater rate than those of the corresponding anhydrous phase. Compared with anhydrous forsterite, we observe a 7% increase in the pressure derivative of the bulk modulus (K{prime}{sub S0} = 4.50(5)), and a 25% increase in the pressure derivative of the shear modulus (G{prime}{sub 0} = 1.75(5)) for forsterite with near maximum possible water content. Using our results, we calculated the compressional, V{sub P}, and shear, V{sub S}, velocities of forsterite as a function of pressure at 300 K. Whereas V{sub P} and V{sub S} of hydrous forsterite are 0.6% and 0.4% slower than those of anhydrous forsterite at ambient pressure, velocity crossovers at {approx} 3-4 GPa result in higher hydrous forsterite velocities at pressures corresponding to depths below {approx} 120 km. At the pressure of the 410-km discontinuity, V{sub P} and V{sub S} of hydrous forsterite exceed those of anhydrous forsterite by 1.1(1)% and 1.9(1)%, respectively. This implies that incorporation of water could decrease the magnitude of the velocity contrast at 410-km depth between forsterite and wadsleyite. Although the effects of hydration on temperature derivatives of the elastic moduli of forsterite and wadsleyite are not yet known, from the current data we estimate that the presence of {approx} 0.4 wt.% H{sub 2}O in forsterite (at 60 mol%) could lower the P and S velocity contrast at 410-km depth to 3.8(4)% and 4.8(6)%, respectively. At high pressures, hydration also decreases the V{sub P}/V{sub S} ratio of forsterite, and lowers the maximum P wave azimuthal anisotropy and S wave splitting of forsterite.

79 ASTRONOMY AND ASTROPHYSICS↗

High-pressure behavior and equations of state of the cobaltates YBaCo{sub 4}O{sub 7}, YBaCo{sub 4}O{sub 7+{delta}}, YBaCoZn{sub 3}O{sub 7} and BaCoO{sub 3-x}

The compressibilities of the cobaltates YBaCo{sub 4}O{sub 7}, YBaCo{sub 4}O{sub 7+{delta}}, YBaCoZn{sub 3}O{sub 7} and BaCoO{sub 3-x} were investigated by in situ powder X-ray diffraction experiments up to 30 GPa using diamond anvil cells. Pressure-induced phase transitions and amorphization were observed in all the samples. The onset of the pressure-induced phase transition and the onset of the amorphization were observed at {approx}11.7 and 12.2 GPa (YBaCo{sub 4}O{sub 7}), at {approx}14.2 and 16.1 GPa (YBaCo{sub 4}O{sub 7+{delta}}), and at {approx}16.7 and 18.7 GPa (YBaCoZn{sub 3}O{sub 7}), respectively. An attempt to laser anneal at high-pressure failed as it led to a decomposition of the YBaCo{sub 4}O{sub 7} phase into a mixture of phases. Fits of second- and third-order Birch-Murnaghan equations-of-state to the p-V data result in B{sub 0}=109(3) GPa for YBaCo{sub 4}O{sub 7}; B{sub 0}=186(4) GPa and B Prime =1.5 for YBaCo{sub 4}O{sub 7+{delta}}; and B{sub 0}=117(1) GPa for YBaCoZn{sub 3}O{sub 7}. The high-pressure behavior of the studied compounds was compared with isostructural compounds and it is shown that the oxygen-content has a very large effect on the high-pressure behavior of this class of materials. Highlights: Black-Right-Pointing-Pointer Compressibilities were investigated by in situ DAC powder X-ray diffraction experiments. Black-Right-Pointing-Pointer Pressure-induced phase transitions were observed in all the samples. Black-Right-Pointing-Pointer High-pressure phases were very sensitive to small amounts of stresses and strains. Black-Right-Pointing-Pointer Due to the metastability of the compounds, laser annealing leads to decomposition. Black-Right-Pointing-Pointer Oxygen-content has a very large effect on the high pressure behavior in these materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The pressure-induced phase transition studies of In{sub 2}S{sub 3} and In{sub 2}S{sub 3}:Ce nanoparticles

A novel method, gas–liquid phase chemical deposition is developed to prepare In{sub 2}S{sub 3} and In{sub 2}S{sub 3}:Ce nanoparticles. The structural, morphology and composition feature of these two nanoparticles is studied by XRD, HRTEM, and XPS. In situ high-pressure synchrotron X-ray diffraction studies were carried out by using a diamond-anvil cell. The doping does not influence the tetragonal-to-cubic phase transition path while results in a lower phase transition pressure of In{sub 2}S{sub 3}:Ce nanoparticles (4.3 GPa) than that of In{sub 2}S{sub 3} nanoparticles (7.1 GPa). The bulk moduli of tetragonal phases are B{sub 0}=87.1±4.3 GPa and B{sub 0}=55.6±4.1 GPa, respectively. The distinct high-pressure behaviors can be explained in term of the doped ions, causing lattice distortion and reducing structural stability of the In{sub 2}S{sub 3} nanoparticles and further accelerating the phase transition. - Graphical abstract: The phase transition of the In{sub 2}S{sub 3} and In{sub 2}S{sub 3}:Ce nanoparticles have been investigated for the first time by in situ high pressure synchrotron X-ray in a diamond anvil cell. Display Omitted - Highlights: • The high-pressure behaviors of In{sub 2}S{sub 3} and In{sub 2}S{sub 3}:Ce have been investigated. • The pressure-induced tetragonal-to-cubic phase transitions have been observed. • The phase transition pressure of In{sub 2}S{sub 3}:Ce is lower than that of In{sub 2}S{sub 3} nanoparticles. • The distinct high-pressure behaviors are ascribed to the dopants. • The doping causes lattice distortion reducing the structural stability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Reynolds-number scaling of wall-pressure–velocity correlations in wall-bounded turbulence

Wall-pressure fluctuations are a practically robust input for real-time control systems aimed at modifying wall-bounded turbulence. The scaling behaviour of the wall-pressure–velocity coupling requires investigation to properly design a controller with such input data so that it can actuate upon the desired turbulent structures. A comprehensive database from direct numerical simulations (DNS) of turbulent channel flow is used for this purpose, spanning a Reynolds-number range$Re_\tau \approx 550\unicode{x2013}5200$. Spectral analysis reveals that the streamwise velocity is most strongly coupled to the linear term of the wall pressure, at a Reynolds-number invariant distance-from-the-wall scaling of$\lambda _x/y \approx 14$(and$\lambda _x/y \approx 8$for the wall-normal velocity). When extending the analysis to both homogeneous directions in$x$and$y$, the peak coherence is centred at$\lambda _x/\lambda _z \approx 2$and$\lambda _x/\lambda _z \approx 1$for$p_w$and$u$, and$p_w$and$v$, respectively. A stronger coherence is retrieved when the quadratic term of the wall pressure is concerned, but there is only little evidence for a wall-attached-eddy type of scaling. An experimental dataset comprising simultaneous measurements of wall pressure and velocity complements the DNS-based findings at one value of$Re_\tau \approx 2$k, with ample evidence that the DNS-inferred correlations can be replicated with experimental pressure data subject to significant levels of (acoustic) facility noise. It is furthermore shown that velocity-state estimations can be achieved with good accuracy by including both the linear and quadratic terms of the wall pressure. An accuracy of up to 72 % in the binary state of the streamwise velocity fluctuations in the logarithmic region is achieved; this corresponds to a correlation coefficient of$\approx$0.6. This thus demonstrates that wall-pressure sensing for velocity-state estimation – e.g. for use in real-time control of wall-bounded turbulence – has merit in terms of its realization at a range of Reynolds numbers.

Mechanics↗

Pressure Induced Nanoparticle Phase Behavior, Property, and Applications

Nanoparticle (NP) high pressure behavior has been extensively studied over the years. Here, we summarize recent progress on the studies of pressure induced NP phase behavior, property, and applications. This review starts with a brief overview of high pressure characterization techniques, coupled with synchrotron X-ray scattering, Raman, fluorescence, and absorption. Then, we survey the pressure induced phase transition of NP atomic crystal structure including size dependent phase transition, amorphization, and threshold pressures using several typical NP material systems as examples. Next, we discuss the pressure induced phase transition of NP mesoscale structures including topics on pressure induced interparticle separation distance, NP coupling, and NP coalescence. Pressure induced new properties and applications in different NP systems are highlighted. Lastly, outlooks with future directions are discussed.

36 MATERIALS SCIENCE↗

Structural, Vibrational, and Electronic Properties of 1D-TlInTe 2 under High Pressure: A Combined Experimental and Theoretical Study

Analogous to 2D layered transition-metal dichalcogenides, the TlSe family of quasi-one dimensional chain materials with the Zintl-type structure exhibits novel phenomena under high pressure. In the present work, we have systematically investigated the high-pressure behavior of TlInTe 2 using Raman spectroscopy, synchrotron X-ray diffraction (XRD), and transport measurements, in combination with first principles crystal structure prediction (CSP) based on evolutionary approach. We found that TlInTe2 undergoes a pressure-induced semiconductor-to-semimetal transition at 4 GPa, followed by a superconducting transition at 5.7 GPa (with T c = 3.8 K). An unusual giant phonon mode (A g ) softening appears at ~10–12 GPa as a result of the interaction of optical phonons with the conduction electrons. The high-pressure XRD and Raman spectroscopy studies reveal that there is no structural phase transitions observed up to the maximum pressure achieved (33.5 GPa), which is in agreement with our CSP calculations. In addition, our calculations predict two high-pressure phases above 35 GPa following the phase transition sequence as I4/mcm (B37) → Pbcm → Pm$\bar{3}$m (B2). Electronic structure calculations suggest Lifshitz (L1 & L2-type) transitions near the superconducting transition pressure. Furthermore, our findings on TlInTe 2 open up a new avenue to study unexplored high-pressure novel phenomena in TlSe family induced by Lifshitz transition (electronic driven), giant phonon softening, and electron–phonon coupling.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Determination of the Rate Constants for the NH 2 (X 2 B 1 ) + NH 2 (X 2 B 1 ) and NH 2 (X 2 B 1 ) + H Recombination Reactions in N 2 as a Function of Temperature and Pressure

The recombination rate constants for the reactions NH2 + NH2 → N2H4 (reaction k1b) and NH2 + H → NH3 (reaction k2b) with N2 as a third-body have been measured as a function of temperature and pressure. The temperature range was from 292 to 533 K and the pressure range from a few Torr up to 300–400 Torr, well within the pressure falloff region. The NH2 radical was produced by 193 nm pulsed-laser photolysis of NH3 in a temperature controlled flow chamber. High-resolution time-resolved laser absorption spectroscopy was used to follow the temporal concentration profiles of both NH2 and NH3, simultaneously. The NH2 radical was monitored at 14800.65 cm–1 using the 1231 (0,7,0)Ã2A1 ← 1331 (0,0,0)$\tilde{X}$2B1 ro-vibronic transition, and NH3 monitored at 3336.39 cm–1 on the qQ3(3)s (1,0,0,0) ← (0,0,0,0) ro-vibrational transition. The necessary collisional broadening parameters for each molecule were measured in separate experiments. The pressure and temperature dependence of k1b can be represented by the Troe parameters: k0, the low-pressure three-body recombination rate constant, k0(T) = (1.14 ± 0.59) × 10–19T–(3.41±0.28) cm6 molecule–2 s–1, and Fcent, the pressure broadening parameter, Fcent = 0.15 ± 0.12, independent of temperature. The data could not be fit by three-independent parameters, and the high-pressure limiting rate constant k∞(T) = 9.33 × 10–10T–0.414 e33/T cm3 molecule–1 s–1 was taken from the high-quality theoretical calculations of Klippenstein et al. (J. Phys. Chem A 2009, 113, 10241). The pressure and temperature dependence of k2b, can be represented by the Troe parameters: k0(T) = (9.95 ± 0.58) × 10–26T(-1.76±0.092) cm6 molecule–2 s–1, Fcent = 0.5 ± 0.2, k∞ = 2.6 × 10–10 cm3 molecule–1 s–1. Again, the data could not be fit with three independent parameters, and k2b∞ was chosen to be 2.6 × 10–10 cm3 molecule–1 s–1 and fixed in the analysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High-Pressure Structural and Thermodynamic Properties of Cerium Orthosilicates (CeSiO 4 )

Pressure-induced phase transitions from the zircon structure-type (I4 1 /amd) to the scheelite structure type (I4 1 /a) are known for many ternary oxides systems (ABO 4 ). In this work, we present the first high-pressure study on synthetic stetindite (CeSiO 4 ) by a combination of in situ high-pressure synchrotron powder X-ray diffraction up to 36 GPa, implemented with and without dual sided laser heating, and in situ high-pressure Raman spectroscopy up to 43 GPa. Two phase transitions were identified: zircon to a high-pressure low-symmetry (HPLS) phase at 15 GPa and then to a scheelite at 18 GPa. The latter from HPLS scheelite phase was found irreversible; i.e., scheelite is fully quenchable at ambient conditions, as in other zircon-type phases. The bulk moduli (K 0 ) of stetindite, HPLS, and high-pressure scheelite phases were determined, respectively, as 171(5), 105(4), and 221(40) GPa by fitting to a second-order Birch-Murnaghan equation of state. The pressure derivatives of vibrational modes and Gru''neisen parameters of the zircon-structured polymorph are similar to those of other orthosilicate minerals. In conclusion, due to the larger ionic radii of Ce 4+ , with respect to Zr 4+ , stetindite was found to possess a softer bulk modulus and undergo the phase transitions at a lower pressure than zircon (ZrSiO 4 ), such observations are consistent with what were found in coffinite (USiO 4 ).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High Pressure–Temperature Study of MgF 2 , CaF 2 , and BaF 2 by Raman Spectroscopy: Phase Transitions and Vibrational Properties of AF 2 Difluorides

The phase transition of AF 2 difluorides strongly depends on pressure, temperature, and cationic radius. Here, we have investigated the phase transition of three difluorides, including MgF 2 , CaF 2 , and BaF 2 , at simultaneously high pressures and temperatures using Raman spectroscopy and X-ray diffraction in externally heated diamond anvil cells up to 55 GPa at 300–700 K. Rutile-type difluoride MgF 2 with a small cationic radius undergoes a transition to the CaCl 2 -type phase at 9.9(1) GPa and 300 K, to the HP-PdF 2 -type phase at 21.0(2) GPa, and to the cotunnite-type phase at 44.2(2) GPa. The phase transition pressure to the HP-PdF 2 and cotunnite structure at 300 K for our single crystal was found to be higher than that in previous studies using polycrystalline samples. Elevating the temperature increases the transition pressure from rutile- to the CaCl 2 -type phase but has a negative influence on the transition pressure when MgF 2 transforms from the HP-PdF 2 - to cotunnite-type phase. Meanwhile, the transition pressure from the CaCl 2 - to HP-PdF 2 -type phase for MgF 2 was identified to be independent of the temperature. Raman peaks suspected to belong to the α-PbO 2 -type phase were observed at 14.6–21.0(1) GPa and 400–700 K. At 300 K, difluorides CaF 2 and BaF 2 in the fluorite structure with larger cationic radii transform to the cotunnite-type phase at 9.6(3) and 3.0(3) GPa at 300 K, respectively, and BaF 2 further undergoes a transition to the Ni 2 In-type phase at 15.5(4) GPa. For both CaF 2 and BaF 2 , elevating the temperature leads to a lower transition pressure from fluorite- to the cotunnite-type phase but has little influence on the transition to the Ni 2 In structure. Raman data provide valuable insights for mode Grüneisen parameters. We note that the mode Grüneisen parameters for both difluorides and dioxides vary linearly with the cation radius. Further calculations for the mode Grüneisen parameters at high pressures for MgF 2 , CaF 2 , and BaF 2 yield a deeper understanding of the thermodynamic properties of the difluorides.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Pressure-Induced Structural Transformations of ZnO Nanowires Probed by X-ray Diffraction

ZnO nanowires were investigated at high pressures of up to 27 GPa in situ in a diamond anvil cell using synchrotron X-ray diffraction. Upon compression, a wurtzite-to-rocksalt phase transformation was observed, but both the onset and the completion pressures of this transformation were enhanced compared with all previously studied morphologies of ZnO, including nanocrystals and their bulk counterparts. Upon decompression, the rocksalt phase was found to sustain at near ambient pressure and could be recovered in a significant amount. Moreover, the pressure-volume equations of state for both the wurtzite and the rocksalt phases indicate that their bulk moduli are significantly higher than those of bulk ZnO and nanocrystals. The SEM images of the ZnO nanowires both before and after the compression suggest the pressure-induced morphology modifications, corroborating the understanding of other structure and property evolutions with pressure. Finally, possible pressure-induced phase transition mechanisms were explored by examining the cell parameters and the internal structural parameter with pressures.

Dong, Zhaohui↗

Experimental and Theoretical Studies on a High Pressure Monoclinic Phase of Ammonia Borane

The effect of pressure on the structure of ammonia borane NH{sub 3}BH{sub 3} (AB) was investigated using a combination of high pressure X-ray diffraction (XRD) and density functional theory (DFT). In situ XRD was performed up to 15.0 GPa at room temperature in a diamond anvil cell, and two first-order phase transitions were observed at 1.6 and 12.9 GPa. The ambient pressure I4mm structure transformed into the high pressure Cmc2{sub 1} phase at 1.6 GPa, and then experienced a second-order isostructural phase transition at 5 GPa, and further developed into a monoclinic P2{sub 1} (Z = 4) phase at 12.9 GPa. The structure of the high pressure P2{sub 1} phase was solved by powder diffraction data and further optimized using DFT calculations. The high pressure phase transitions were found to be reversible upon releasing pressure. The behavior of the N-H {hor_ellipsis} H-B dihydrogen bonding framework, inter- and intramolecular interactions at high pressure was also investigated. The origin of the phase transition at 12.9 GPa is attributed to the reorganization of the dihydrogen bonding network and the change in the rotational dynamics of the NH{sub 3} and BH{sub 3} groups.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The Effects of Localized Thermal Pressure on Equilibrium Magnetic Fields and Particle Drifts in The Inner Magnetosphere

Localized injections of hot anisotropic plasma sheet particles into the inner magnetosphere can significantly deform the quiet time dipole–like magnetic field and thus disturb electron and ion's drift paths and scattering rates. Although many details of magnetic field deformation can be inferred from empirical models, roles of different characteristics of injected plasma on the structure of such deformation require further investigation. In this study, we use the 2–D axisymmetric equilibrium model to calculate self–consistent magnetic field in force balance with a Gaussian thermal pressure distribution characterized by four input parameters: the ratio between plasma pressure and magnetic pressure ( β ) at the pressure peak β 0 , the radial location of the pressure peak L 0 , the width of the half peak pressure σ 0 , and the equatorial pressure anisotropy A e . Using the modeled magnetic field, we find that the magnetic field perturbation increases with increasing β 0 and decreasing σ 0 while the magnetic curvature perturbation increases with increasing A e , β 0 , and σ 0 and decreasing L 0 . For energetic particles the change of magnetic gradient drift motion is much greater than that of curvature drift motion. The magnetic dip structure formation requires a critical β value that increases with increasing σ 0 and decreasing L 0 . Despite the unavailability of observations in the existing literatures to check the condition of magnetic dip formation, such condition will be checked against observations as a future study. Lastly, we also use 3–D ring current–atmosphere interactions model with self–consistent magnetic field model to illustrate the effect of azimuthal pressure distribution, which is relevant to asymmetric ring current.

79 ASTRONOMY AND ASTROPHYSICS↗

Importance of Ambipolar Electric Field in Driving Ion Loss From Mars: Results From a Multifluid MHD Model With the Electron Pressure Equation Included

The multi-fluid (MF) magnetohydrodynamic model of Mars is improved by solving an additional electron pressure equation. Through the electron pressure equation, the electron temperature is calculated based on the effects from various electron-related heating and cooling processes (e.g., photo-electron heating, electron-neutral collision, and electron-ion collision), and thus, the improved model can calculate the electron temperature and the electron pressure force terms self-consistently. Model results of a typical case using the MF with electron pressure equation included model are compared in detail to identical cases using the MF and multi-species models to identify the effect of the improved physics. Here, we find that when the electron pressure equation is included, the general interaction patterns are similar to those with no electron pressure equation. However, the MF with electron pressure equation included model predicts that the electron temperature is much larger than the ion temperature in the ionosphere, consistent with both Viking and Mars Atmosphere and Volatile EvolutioN (MAVEN) observations. Using our numerical model, we also examined in detail the relative importance of different forces in the plasma interaction region. All three models are also applied to a MAVEN event study using identical input conditions; overall, the improved model matches best with MAVEN observations. All of the simulation cases are examined in terms of the total ion loss, and the results show that the inclusion of the electron pressure equation increases the escape rates by 50–110% in total mass, depending on solar condition and strong crustal field orientation, clearly demonstrating the importance of the ambipolar electric field in facilitating ion escape.

79 ASTRONOMY AND ASTROPHYSICS↗

The impact of metastability on the high-pressure behavior of cerium

The structures adopted by solids under pressure are often assumed to reflect thermodynamic equilibrium, yet in many materials phase selection is strongly influenced by kinetic pathways and microstructural inheritance. Elemental cerium (Ce) exemplifies this challenge, with decades of conflicting reports describing different high-pressure crystal structures emerging under nominally identical conditions. Here we use neutron diffraction from large ( ~ 60 mm 3 ) sample volumes to follow the structural evolution in ultra-high-purity Ce during controlled pressure-temperature cycling between 85 and 295 K and up to 8 GPa. We find that the crystal structure formed at high pressure depends on the compression pathway: slow compression ( ~ 0.25 GPa hr −1 ) at room temperature favors an orthorhombic phase (α'), whereas slow ( ~ 0.25 GPa hr −1 ) and also moderately faster ( ~ 0.5 GPa hr −1 ) compression at low temperature stabilizes a pure monoclinic phase (α"). The low-temperature phase persists metastably over a wide temperature range but transforms irreversibly upon heating above ~ 280 K, or modest pressure cycling. Remarkably, the lower-pressure γ phase remains trapped far beyond the expected stability field, persisting to the highest pressures studied. These observations show that phase selection in Ce is governed by kinetics and microstructural memory rather than equilibrium thermodynamics or sample morphology alone, establishing path dependence as a defining feature of its high-pressure behavior.

Ridley, Christopher J. [Oak Ridge National Laborat↗