Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “POINT DEFECTS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,711 records · Page 95
All sourcesNASA NTRSDOE OSTI
DOE OSTI2013

Phonon transport assisted by inter-tube carbon displacements in carbon nanotube mats

Thermal transport in carbon nanotube (CNT) mats, consisting of randomly networked multi-walled carbon nanotubes (MWNTs), is not as efficient as in an individual CNT because of the constrained tube-to-tube phonon transport. Through experiments and modeling, we discover that phonon transport in CNT mats is significantly improved by ion irradiation, which introduces inter-tube displacements, acting as stable point contacts between neighboring tubes. Inter-tube displacement-mediated phonon transport enhances conductivity, while inter-tube phonon-defect scattering reduces conductivity. At low ion irradiation fluence, inter-tube thermal transport enhancement leads to thermal conductivity increase by factor . 5, while at high ion irradiation fluence point defects within tubes cause a decrease in thermal conductivity. Molecular dynamics simulations support the experimentally obtained results and the proposed mechanisms. Further conductivity enhancement in irradiated mats was obtained by post-irradiation heat treatment that removes majority of the defects within the tubes without affecting thermally stable inter-tube displacements.

36 MATERIALS SCIENCE↗
DOE OSTI2014

Ion channeling revisited

A MS Excel program has been written that calculates accidental, or unintentional, ion channeling in cubic bcc, fcc and diamond lattice crystals or polycrystalline materials. This becomes an important issue when simulating the creation by energetic neutrons of point displacement damage and extended defects using beams of ions. All of the tables and graphs in the three Ion Beam Analysis Handbooks that previously had to be manually looked up and read from were programed into Excel in handy lookup tables, or parameterized, for the case of the graphs, using rather simple exponential functions with different powers of the argument. The program then offers an extremely convenient way to calculate axial and planar half-angles and minimum yield or dechanneling probabilities, effects on half-angles of amorphous overlayers, accidental channeling probabilities for randomly oriented crystals or crystallites, and finally a way to automatically generate stereographic projections of axial and planar channeling half-angles. The program can generate these projections and calculate these probabilities for axes and [hkl] planes up to (555).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1981

Cleanroom software development

The 'cleanroom' software development process is a technical and organizational approach to developing software with certifiable reliability. Key ideas behind the process are well structured software specifications, randomized testing methods and the introduction of statistical controls; but the main point is to deny entry for defects during the development of software. This latter point suggests the use of the term 'cleanroom' in analogy to the defect prevention controls used in the manufacturing of high technology hardware. In the 'cleanroom', the entire software development process is embedded within a formal statistical design, in contrast to executing selected tests and appealing to the randomness of operational settings for drawing statistical inferences. Instead, random testing is introduced as a part of the statistical design itself so that when development and testing are completed, statistical inferences are made about the operation of the system.

Dyer, M.↗
DOE OSTI2016

Twin-assisted growth of nominally stable substrates underneath dewetted Au nanoparticles

By applying a simple and inexpensive thermal treatment, we synthesized supported gold-oxide nanostructures, which have potential applications to plasmonic devices and biosensors. The regrowth of nominally stable substrates under gold nanoparticles is associated with the appearance of preferential orientations of dewetted nanoparticles and the formation of atomically sharp interfacial monolayers. Steps present at the interfacial monolayer usually occur at defects including the intersection points of twin planes at the interface. They were related to the nucleation and immigration of the interfacial monolayers, prompting the substrate regrowth. Accordingly, we proposed the twin-assisted growth mechanism, which provides insight on the synthesis of gold-oxide nanostructures. - Highlights: • The twin-assisted growth mechanism is proposed for the abnormal regrowth of substrate underneath Au nanoparticles. • The substrate regrowth is related to the steps and ledges that are present at the Au–MgAl{sub 2}O{sub 4} interfacial monolayers. • Interfacial steps are detected at defects such as the intersecting points of twin planes at the interface.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Nitrogen-Defective Polymeric Carbon Nitride Nanolayer Enabled Efficient Electrocatalytic Nitrogen Reduction with High Faradaic Efficiency

Identifying highly selective catalysts and accurately measuring NH 3 yield without false-positives from contaminations remain two challenges in electrochemical nitrogen reduction reaction (NRR). Here, we report N-defective carbon nitride grown on carbon paper (CN/C) as a highly selective electrocatalyst. The NH 3 yield was determined reliably by the slope of mNH 3 -time plot rather than averaging the accumulated amount over time. Results showed the as-synthesized CN/ C 600 (synthesized at 600 °C) with a higher density of C=N-C N2C vacancies achieved an NH 3 production of 2.9 μg mgcat. -1 h -1 at -0.3 V (versus RHE), ~5.7-fold higher than CN/C 500 . The Faradaic efficiency for CN/ C 600 is among the highest of 62.1%, 33.9%, and 16.8% at -0.1 V, -0.2 V, and -0.3 V, respectively. The NH 3 production was verified by isotope 15 N 2 experiments. Further increase of N-defects on CN/C 600 using plasma etching led to higher NH 3 yield than comparably larger current, pointing to N-defects sites for promoting NRR.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2012

Oriented growth of urchin-like zinc oxide micro/nano-scale structures in aqueous solution

Highlights: Black-Right-Pointing-Pointer Highly oriented and well-defined ZnO urchin-like crystals were successfully fabricated by a facile and effective hydrotherm method. Black-Right-Pointing-Pointer Polyvinylpyrrolidone- and hydrogen peroxide-assisted synthesis of ZnO could optimize its crystalline quality and the obtained ZnO have smooth surface, radial growth of morphology, obvious crystal edges and decreased defects. Black-Right-Pointing-Pointer The physicochemical properties of samples were studied by analysis of its structure, morphology, surface and optical properties. Black-Right-Pointing-Pointer This study represented a multistep mechanism based on [Zn(OH){sub 4}]{sup 2-} growth units about formation such urchin-like structure. -- Abstract: The urchin-like ZnO microcrystals with high crystallinity decomposed from [Zn(OH){sub 4}]{sup 2-} directly were obtained via a hydrothermal method. The morphology, particle size, crystalline structure and fluorescence of the as-prepared ZnO were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD) and photoluminescence (PL) analyses. The results demonstrated that the urchin-like ZnO crystals with wurtzite structure had a narrow distribution in size, which could be adjusted in the range of 30-80 {mu}m by varying reaction time. Broad visible light emission peak was also observed in the PL spectra of the synthesized ZnO products. A multistep growth process about how to form such a structure was proposed.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Multiphysics FISPACT-II and TENDL-2019 simulation: neutron-induced damage metrics

Nuclear interactions can be the source of atomic displacement, irradiation-induced defects and transmutation in structural materials. Such quantities are derived from, or can be correlated to, nuclear kinematic simulations of primary atomic energy distributions spectra and the quantification of the numbers of secondary defects produced per primary as a function of the available recoils, residual and emitted, energies. Recoil kinematics of neutral, residual, gas, proton, alpha particle emissions are now more rigorously treated based on recent, complete and enhanced nuclear data parsed in state-of-the-art processing tools. Defect production metrics are the starting point in the complex problem of correlating and simulating the behaviour of materials under irradiation, as experimental information is rare or scattered. Detailed, segregated primary knock-on-atom metrics are now becoming available as the starting point of further simulation processes of isolated and clustered defects in material lattices. This allows more materials, lattices, neutron incident energy ranges, and irradiation conditions to be explored with sufficient data to adequately cover both standard and novel applications and materials: the broader reactor applications landscape. The damage metrics of of materials are systematically explored under typical but different reactor's type environment. The inventory code FISPACT-II combined with the enhanced nuclear data forms of the TENDL-2019 libraries allow one to not only calculate dpa from mostly scattering events but to also properly predict gas production, nuclear heating and transmutation under the same conditions.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2023

Stacking Faults Originating from Star-Defects in 4H-SiC

Intense efforts are currently in progress to study various sources of basal plane dislocations (BPDs) in SiC epitaxial layers. BPDs can generate Shockley-type stacking faults (SSFs) in SiC epitaxial layers, which have been shown to be associated with the degradation of power devices. This study shows that the star-shaped defect can be a source of several BPDs in the epitaxial layer. We investigate the complex microstructure of the star defect, the generation of BPDs, and expansion of SSFs using various complementary microscopy and optical techniques. We show direct evidence that star-defects can be a nucleation point of single-SSFs that can expand at the core of the defect. Newly found secondary dislocation arrays extending over a few centimeters away are found to be emanating from the primary arms of the star defect. The presence of such dislocation walls and the expansion of single-SSFs will affect the yield of numerous die on a wafer. Further understanding of the formation mechanism of stacking faults generated from star-defects as provided in this study helps understand their effect on SiC-based devices, which is crucial to assess device reliability.

36 MATERIALS SCIENCE↗
DOE OSTI2021

LxCxD motif of the APC/C coactivator subunit FZR1 is critical for interaction with the retinoblastoma protein

Highlights: • Several oncogenic viral proteins bind to tumor suppressor pRB via LxCxE motif. • LxCxE present in many cellular proteins that interact with pRB. • APC/C interacts with pRB via this motif in its FZR1 subunit. • FZR1 LxCxE-like LxCxD critical for FZR1-pRB direct binding and SKP2 ubiquitylation. • Mutation of FZR1 LxCxD alters cell cycle. Retinoblastoma protein (pRB) regulates cell cycle by utilizing different regions of its pocket domain for interacting with E2F family of transcription factors and with cellular and viral proteins containing an LxCxE motif. An LxCxE-like motif, LxCxD, is present in FZR1, an adaptor protein of the multi-subunit E3 ligase complex anaphase-promoting complex/cyclosome (APC/C). The APC/C{sup FZR1} complex regulates the timely degradation of multiple cell cycle proteins for mitotic exit and maintains G1 state. We report that FZR1 interacts with pRB via its LxCxD motif. By using point mutations, we found that the cysteine residue in the FZR1 LxCxD motif is critical for direct interaction with pRb. The direct binding of the LxCxD motif of FZR1 to the pRB LxCxE binding pocket is confirmed by using human papillomavirus protein E7 as a competitor, both in vitro and in vivo. While mutation of the cysteine residue significantly disrupts FZR1 interaction with pRB, this motif does not affect FZR1 and core APC/C association. Expression of the FZR1 point mutant results in accumulation of S-phase kinase-associated protein 2 (SKP2) and Polo-like kinase 1 (PLK1), while p27{sup Kip1} and p21{sup Cip1} proteins are downregulated, indicating a G1 cell cycle defect. Consistently, cells containing point mutant FZR1 enter the S phase prematurely. Together our results suggest that the LxCxD motif of FZR1 is a critical determinant for the interaction between FZR1 and pRB and is important for G1 restriction.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2015

Detectability limitations with 3-D point reconstruction algorithms using digital radiography

The estimated impact of pores in clusters on component fatigue will be highly conservative when based on 2-D rather than 3-D pore positions. To 3-D position and size defects using digital radiography and 3-D point reconstruction algorithms in general require a lower inspection time and in some cases work better with planar geometries than X-ray computed tomography. However, the increase in prior assumptions about the object and the defects will increase the intrinsic uncertainty in the resulting nondestructive evaluation output. In this paper this uncertainty arising when detecting pore defect clusters with point reconstruction algorithms is quantified using simulations. The simulation model is compared to and mapped to experimental data. The main issue with the uncertainty is the possible masking (detectability zero) of smaller defects around some other slightly larger defect. In addition, the uncertainty is explored in connection to the expected effects on the component fatigue life and for different amount of prior object-defect assumptions made.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2024

A thermotropic liquid crystal enables efficient and stable perovskite solar modules

Perovskite solar cells have seen impressive progress in performance and stability, yet maintaining efficiency while scaling area remains a challenge. Here we find that additives commonly used to passivate large-area perovskite films often co-precipitate during perovskite crystallization and aggregate at interfaces, contributing to defects and to spatial inhomogeneity. Here we develop design criteria for additives to prevent their evaporative precipitation and enable uniform passivation of defects. We explored liquid crystals with melting point below the perovskite processing temperature, functionalization for defect passivation and hydrophobicity to improve device stability. We find that thermotropic liquid crystals such as 3,4,5-trifluoro-4'-(trans-4-propylcyclohexyl)biphenyl enable large-area perovskite films that are uniform, low in defects and stable against environmental stress factors. We demonstrate modules with a certified stabilized efficiency of 21.1% at an aperture area of 31 cm 2 and enhanced stability under damp-heat conditions (ISOS-D-3, 85% relative humidity, 85 °C) with T 86 (the duration for the efficiency to decay to 86% of the initial value) of 1,200 h, and reverse bias with (ISOS-V-1, negative maximum-power-point voltage) and without bypass diodes.

14 SOLAR ENERGY↗
DOE OSTI2012

Alpha self-irradiation effect on the local structure of the U{sub 0.85}Am{sub 0.15}O{sub 2{+-}x} solid solution

Uranium-americium mixed oxides are promising fuels for achieving an efficient Am recycling. Previous studies on U{sub 0.85}Am{sub 0.15}O{sub 2{+-}x} materials showed that the high {alpha} activity of {sup 241}Am induces pellet swelling which is a major issue for cladding materials design. In this context, X-ray Diffraction and X-ray Absorption Spectroscopy measurements were used to study self-irradiation effects on U{sub 0.85}Am{sub 0.15}O{sub 2{+-}x} local structure and to correlate these results with those obtained at the macroscopic scale. For a cumulative {alpha} decay dose equal to 0.28 dpa, it was shown that non-defective fluorite solid solutions were achieved and therefore, that the fluorite structure is stable for the studied doses. In addition, both interatomic distance and lattice parameter expansions were observed, which only partially explains the macroscopic swelling. As expected, an increase of the structural disorder with self-irradiation was also observed. - Graphical abstract: X-ray Diffraction and X-ray Absorption Spectroscopy measurements were performed on U{sub 0.85}Am{sub 0.15}O{sub 2{+-}x}, exhibiting various cumulative {alpha} decay doses, in order to study self-irradiation effects on local structure and to correlate these results with those obtained at the macroscopic scale. Thus, it was shown that the fluorite structure is stable for the studied doses. In addition, both interatomic distance and lattice parameter expansions were observed, explaining partially the macroscopic swelling. Highlights: Black-Right-Pointing-Pointer Non-defective fluorite U{sub 0.85}Am{sub 0.15}O{sub 2{+-}x} solid solutions were achieved. Black-Right-Pointing-Pointer The fluorite structure is stable for the studied doses. Black-Right-Pointing-Pointer A lattice parameter increase was observed, which partially explains the macroscopic swelling. Black-Right-Pointing-Pointer The increase of the structural disorder can be understood from the ballistic effect associated to the Am high alpha activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2011

Origin of resistivity change in NiO thin films studied by hard x-ray photoelectron spectroscopy

We investigated origins of the resistivity change during the forming of NiO based resistive random access memories in a nondestructive way using hard x-ray photoelectron spectroscopy. Energy shifts and bandgap states observed after switching suggest that oxygen vacancies are created in the low resistive state. As a result conduction may occur via defects such as electrons traps and metallic nickel impurities. Migration of oxygen atoms seems to be the driving mechanism. This provides concrete evidence of the major role played by oxygen defects in decreasing resistivity. This is a key point since oxygen vacancies are particularly unstable and thus difficult to identify by physico-chemical analyses.

36 MATERIALS SCIENCE↗
DOE OSTI2019

The Model of Decomposition of a Fe–Cu Alloy with Concentration-Depending Interatomic Interactions

The thermodynamics and kinetics of decomposition of a Fe–Cu alloy are investigated in the context of a simple ab initio parameterization model taking into account the concentration dependence of the magnetic contribution to the free energy. It is shown that taking into account a difference between the short-range and long-range magnetic orders near the Curie temperature is very important for calculating the solubility of copper in iron. The solubility of copper in bcc iron and the stability limit of a homogeneous state (physical spinodal) are evaluated via the kinetic Monte Carlo method. The impact of structural defects (dislocations and grain boundaries) on these curves, as well as on the kinetic time–temperature—transformation (TTT) diagram, is also discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1993

Defects in electro-optically active polymer solids

There is considerable current interest in the application of organic and polymeric materials for electronic and photonic devices. The rapid, non-linear optical (NLO) response of these materials makes them attractive candidates for waveguides, interferometers, and frequency doublers. In order to realize the full potential of these systems, it is necessary to develop processing schemes which can fabricate these molecules into ordered arrangements. There is enormous potential for introducing well-defined, local variations in microstructure to control the photonic properties of organic materials by rational 'defect engineering.' This effort may eventually become as technologically important as the manipulation of the electronic structure of solid-state silicon based devices is at present. The success of this endeavor will require complimentary efforts in the synthesis, processing, and characterization of new materials. Detailed information about local microstructure will be necessary to understand the influence of symmetry breaking of the solid phases near point, line, and planar defects. In metallic and inorganic polycrystalline materials, defects play an important role in modifying macroscopic properties. To understand the influence of particular defects on the properties of materials, it has proven useful to isolate the defect by creating bicrystals between two-component single crystals. In this way the geometry of a grain boundary defect and its effect on macroscopic properties can be determined unambiguously. In crystalline polymers it would be valuable to establish a similar depth of understanding about the relationship between defect structure and macroscopic properties. Conventionally processed crystalline polymers have small crystallites (10-20 nm), which implies a large defect density in the solid state. Although this means that defects may play an important or even dominant role in crystalline or liquid crystalline polymer systems, it also makes it difficult to isolate the effect of a particular boundary on a macroscopically observed property. However, the development of solid-state and thin-film polymerization mechanisms have facilitated the synthesis of highly organized and ordered polymers. These systems provide a unique opportunity to isolate and investigate in detail the structure of covalently bonded solids near defects and the effect of these defects on the properties of the material. The study of defects in solid polymers has been the subject of a recent review (Martin, 1993).

Martin, David C.↗
DOE OSTI2019

Experimental Study on the Porosity of Electron Beam Melting-Manufactured Ti6Al4V

Electron beam melting (EBM) is one of the powder bed fusion technologies, which utilizes a high-energy electron beam, as a moving heat source, in order to melt (by rapid self-cooling) metal powder and produce parts in a layer-building fashion. Anyway, many technical aspects concerning the quality of EBM-produced components are still industrial open items and studies need to be carried out. In accordance with the industrial needs, in this work researchers have studied the influence of two process parameters, i.e., samples orientation and height in the build chamber. The experiments have consisted in rectangular parallelepiped (50 × 10 × 10 mm) samples Ti6Al4V produced by EBM following a two-factor DOE. A tomographic investigation of all the samples produced by EBM has been carried out in order to get a complete set of data on porosity defects that have been analyzed showing the influence of process parameters on the porosity generation and pointing out typical features of defect distributions. The results obtained from this work have given precious information to designers and EBM technologists in order to: optimize the components’ design and the building setup obtaining a manufacturing process with the minimal level of porosity defects (best growth orientation). provide information for mechanical post-processing (metal removal).

36 MATERIALS SCIENCE↗
DOE OSTI2026

Fracture Analysis of Cohesive Zone Models for Modeling Residual Stress Induced Delamination in Composite Structures

A fracture study of coupon-scale composite cylinders with embedded defects was conducted with an objective to assess and validate a modeling approach using two available cohesive material models. The study included experimental and simulation evaluations of initiation of crack growth and progression. Interrupted thermal experiments used acoustic emissions monitoring to identify the onset of crack progression during each cooling interval and ultrasonic scanning provided images of defect growth. Verification, validation, and uncertainty quantification (VVUQ) processes were performed in the assessment of the simulation predicted temperature at which crack propagation begins (quantity of interest). The Sobol sensitivity analysis identified the hoop direction elastic modulus in the carbon fiber reinforced polymer (CFRP) plies as the most influential parameter for simulations using both cohesive models, accounting for at least 70% of the variation in the temperature at crack propagation. The UQ temperature range for the Tvergaard-Hutchinson model was higher (more conservative) than the experimental acoustic measurement indicators of crack progression, while the temperature range for the Thouless-Parmigiani model enveloped the experimental data points for the primary defect size of 0.75 x 1 in. The simulations could not capture the stable crack growth indicated in the experiments. This is likely due to the models’ inability to represent anisotropic fracture toughness attributed to the structure of the orthotropic fiber weave in a woven composite laminate.

42 ENGINEERING↗
DOE OSTI2018

Spontaneous topological charging of tactoids in a living nematic

Abstract Living nematic is a realization of an active matter combining a nematic liquid crystal with swimming bacteria. The material exhibits a remarkable tendency towards spatio-temporal self-organization manifested in formation of dynamic textures of self-propelled half-integer topological defects (disclinations). Here we report on the study of such living nematic near normal inclusions, or tactoids, naturally realized in liquid crystals close to the isotropic-nematic (I–N) phase transition. On the basis of the computational analysis, we have established that tactoid’s I–N interface spontaneously acquire negative topological charge which is proportional to the tactoid’s size and depends on the concentration of bacteria. The observed negative charging is attributed to the drastic difference in the mobilities of +1/2 and −1/2 topological defects in active systems. The effect is described in the framework of a kinetic theory for point-like weakly-interacting defects with different mobilities. Our dedicated experiment fully confirmed the theoretical prediction. The results hint into new strategies for control of active matter.

59 BASIC BIOLOGICAL SCIENCES↗