Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PERMITTIVITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,711 records · Page 95

X-ray driven channeling acceleration in crystals and carbon nanotubes

Acceleration of particles channeling in a crystal by means of diffracted x-rays via Bormann anomalous transmission was conceived for heavy ions and muons by Tajima and Cavenago [Phys. Rev. Lett. 59, 1440 (1987)], which potentially offers an appreciably high field gradient on the order of GV/cm. The theoretical model of the high gradient acceleration has been studied in two kinds of atomic structure, crystals and carbon nanotubes (CNTs), with analytic calculations and electromagnetic eigenmode simulations. A range of acceleration gradients and cutoffs of the x-ray power (the lowest power limit to overcome the Bremsstrahlung radiation losses) are characterized in terms of the lattice constants, unit cell sizes, and photon energies. The parametric analysis indicates that the required x-ray power can be reduced to an order of megawatt by replacing crystals with CNTs. Eventually, the equivalent dielectric approximation of a multi-wall nanotube shows that 250–810 MeV muons can be synchronously coupled with x-rays of 0.65–1.32 keV in the accelerating structure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Enhanced ferroelectric and dielectric properties of (111)-oriented highly cation-ordered PbSc{sub 0.5}Ta{sub 0.5}O{sub 3} thin films

Cation-ordered (111)-oriented epitaxial PbSc{sub 0.5}Ta{sub 0.5}O{sub 3} (PST) thin films were deposited by pulsed laser deposition on SrRuO{sub 3}-electroded SrTiO{sub 3} (111) substrates at three different temperatures of 525 °C, 550 °C, and 575 °C. All the films were well crystalline and (111)-oriented at all the three growth temperatures; however, the films deposited at the temperatures other than 550 °C exhibited the presence of a pyrochlore phase. X-ray diffraction analysis and transmission electron microscopy measurements revealed that the films were epitaxial and highly cation-ordered. In comparison to (001)-oriented PST films, (111)-oriented films on SrRuO{sub 3}/SrTiO{sub 3} (111) exhibited enhanced ferroelectric and dielectric properties with a broad size distribution of cation-ordered domains (5–100 nm). At a measurement temperature of 100 K, the remnant polarization of PST (111) films is almost √3 times larger than the remnant polarization observed for (001)-oriented PST films, which is attributed to the (111) orientation of the films, as the spontaneous polarization in PST lies close to the [111] direction. The observed dielectric constant and loss at 1 kHz were around 1145 and 0.11, respectively. The dielectric constant is thus almost three times higher than for previously reported (001)-oriented PST thin films, most probably due to the enhancement in cation-ordering.

36 MATERIALS SCIENCE↗

Room temperature multiferroic properties of Pb(Fe{sub 0.5}Nb{sub 0.5})O{sub 3}–Co{sub 0.65}Zn{sub 0.35}Fe{sub 2}O{sub 4} composites

We report the crystal structure, magnetic, ferroelectric, dielectric, and magneto-dielectric properties of [Pb(Fe{sub 0.5}Nb{sub 0.5})O{sub 3}]{sub (1−x)}[Co{sub 0.65}Zn{sub 0.35}Fe{sub 2}O{sub 4}]{sub x}: (x = 0.1, 0.2, 0.3, and 0.4) composites. Rietveld refinement results of X-ray diffraction patterns confirm the formation of these composites for all x values. All the composites show well-saturated ferroelectric and ferromagnetic hysteresis (multiferroic-composite behavior) at room temperature. With increase in Co{sub 0.65}Zn{sub 0.35}Fe{sub 2}O{sub 4} (CZFO) content an increase in saturation magnetization, and decrease in saturation polarization, remanent polarization, and dielectric constant are observed. The ferroelectric phase transition temperature increases with increase in CZFO content. All of the compositions undergo second-order ferroelectric phase transitions, which can be explained by Landau-Devonshire theory. The recoverable energy density (∼0.20 to 0.04 J/cm{sup 3}) and charge-curve energy density (∼0.84 to 0.11 J/cm{sup 3}) decrease with increase in the CZFO content. The room-temperature magneto-dielectric measurements provide direct evidence of magneto-electric coupling via strain at room temperature.

36 MATERIALS SCIENCE↗

Influence of image charge effect on exciton fine structure in an organic-inorganic quantum well material

We have investigated experimentally excitonic properties in organic-inorganic hybrid multi quantum well crystals, (C{sub 4}H{sub 9}NH{sub 3}){sub 2}PbBr{sub 4} and (C{sub 6}H{sub 5}−C{sub 2}H{sub 4}NH{sub 3}){sub 2}PbBr{sub 4}, by measuring photoluminescence, reflectance, photoluminescence excitation spectra. In these materials, the excitonic binding energies are enhanced not only by quantum confinement effect (QCE) but also by image charge effect (ICE), since the dielectric constant of the barrier layers is much smaller than that of the well layers. By comparing the 1s-exciton and 2s-exciton energies, we have investigated the influence of ICE with regard to the difference of the Bohr radius.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Adsorption of formic acid on rutile TiO{sub 2} (110) revisited: An infrared reflection-absorption spectroscopy and density functional theory study

Formic acid (HCOOH) adsorption on rutile TiO{sub 2} (110) has been studied by s- and p-polarized infrared reflection-absorption spectroscopy (IRRAS) and spin-polarized density functional theory together with Hubbard U contributions (DFT+U) calculations. To compare with IRRAS spectra, the results from the DFT+U calculations were used to simulate IR spectra by employing a three-layer model, where the adsorbate layer was modelled using Lorentz oscillators with calculated dielectric constants. To account for the experimental observations, four possible formate adsorption geometries were calculated, describing both the perfect (110) surface, and surfaces with defects; either O vacancies or hydroxyls. The majority species seen in IRRAS was confirmed to be the bridging bidentate formate species with associated symmetric and asymmetric frequencies of the ν(OCO) modes measured to be at 1359 cm{sup −1} and 1534 cm{sup −1}, respectively. The in-plane δ(C–H) wagging mode of this species couples to both the tangential and the normal component of the incident p-polarized light, which results in absorption and emission bands at 1374 cm{sup −1} and 1388 cm{sup −1}. IRRAS spectra measured on surfaces prepared to be either reduced, stoichiometric, or to contain surplus O adatoms, were found to be very similar. By comparisons with computed spectra, it is proposed that in our experiments, formate binds as a minority species to an in-plane Ti{sub 5c} atom and a hydroxyl, rather than to O vacancy sites, the latter to a large extent being healed even at our UHV conditions. Excellent agreement between calculated and experimental IRRAS spectra is obtained. The results emphasize the importance of protonation and reactive surface hydroxyls – even under UHV conditions – as reactive sites in e.g., catalytic applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Charge transport mechanisms of graphene/semiconductor Schottky barriers: A theoretical and experimental study

Graphene has been proposed as a material for semiconductor electronic and optoelectronic devices. Understanding the charge transport mechanisms of graphene/semiconductor Schottky barriers will be crucial for future applications. Here, we report a theoretical model to describe the transport mechanisms at the interface of graphene and semiconductors based on conventional semiconductor Schottky theory and a floating Fermi level of graphene. The contact barrier heights can be estimated through this model and be close to the values obtained from the experiments, which are lower than those of the metal/semiconductor contacts. A detailed analysis reveals that the barrier heights are as the function of the interface separations and dielectric constants, and are influenced by the interfacial states of semiconductors. Our calculations show how this behavior of lowering barrier heights arises from the Fermi level shift of graphene induced by the charge transfer owing to the unique linear electronic structure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Optical phonon modes in Al{sub 1−x}Sc{sub x}N

Optical phonons are measured to probe the origins of the reported anomalously high piezoelectric response in aluminum scandium nitride (Al{sub 1−x}Sc{sub x}N). Epitaxial layers with 0 ≤ x ≤ 0.16 deposited on sapphire(0001) exhibit a refractive index below the band gap, which increases from 2.03 for x = 0 to 2.16 for x = 0.16, corresponding to a dielectric constant ε{sub ∞} = 4.15 + 3.2x. Raman scattering shows that zone-center E{sub 2}(H) and A{sub 1}(TO) phonon modes shift to lower frequencies with increasing x, following linear relationships: ω(E{sub 2}(H)) = 658–233x (cm{sup −1}) and ω(A{sub 1}(TO)) = 612–159x (cm{sup −1}). Similarly, zone-center E{sub 1}(TO) and A{sub 1}(LO) phonon mode frequencies obtained from specular polarized infrared reflectance measurements red-shift to ω(E{sub 1}(TO)) = 681–209x (cm{sup −1}) and ω(A{sub 1}(LO)) = 868–306x (cm{sup −1}). The measured bond angle decreases linearly from 108.2° to 106.0°, while the length of the two metal-nitrogen bonds increase by 3.2% and 2.6%, as x increases from 0 to 0.16. This is associated with a 3%–8% increase in the Born effective charge and a simultaneous 6% decrease in the covalent metal-N bond strength, as determined from the measured vibrational frequencies described with a Valence-Coulomb-Force-Field model. The overall results indicate that bonding in Al-rich Al{sub 1−x}Sc{sub x}N qualitatively follows the trends expected from mixing wurtzite AlN with metastable hexagonal ScN. However, extrapolation suggests non-linear composition dependencies in bond angle, length, and character for x ≥ 0.2, leading to a structural instability that may be responsible for the reported steep increase in the piezoelectric response.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Room temperature dielectric and magnetic properties of Gd and Ti co-doped BiFeO{sub 3} ceramics

Room temperature dielectric and magnetic properties of BiFeO{sub 3} samples, co-doped with magnetic Gd and non-magnetic Ti in place of Bi and Fe, respectively, were reported. The nominal compositions of Bi{sub 0.9}Gd{sub 0.1}Fe{sub 1–x}Ti{sub x}O{sub 3} (x = 0.00-0.25) ceramics were synthesized by conventional solid state reaction technique. X-ray diffraction patterns revealed that the substitution of Fe by Ti induces a phase transition from rhombohedral to orthorhombic at x > 0.20. Morphological studies demonstrated that the average grain size was reduced from ∼1.5 μm to ∼200 nm with the increase in Ti content. Due to Ti substitution, the dielectric constant was stable over a wide range of high frequencies (30 kHz to 20 MHz) by suppressing the dispersion at low frequencies. The dielectric properties of the compounds are associated with their improved morphologies and reduced leakage current densities probably due to the lower concentration of oxygen vacancies in the compositions. Magnetic properties of Bi{sub 0.9}Gd{sub 0.1}Fe{sub 1–x}Ti{sub x}O{sub 3} (x = 0.00-0.25) ceramics measured at room temperature were enhanced with Ti substitution up to 20% compared to that of pure BiFeO{sub 3} and Ti undoped Bi{sub 0.9}Gd{sub 0.1}FeO{sub 3} samples. The enhanced magnetic properties might be attributed to the substitution induced suppression of spiral spin structure of BiFeO{sub 3}. An asymmetric shifts both in the field and magnetization axes of magnetization versus magnetic field curves was observed. This indicates the presence of exchange bias effect in these compounds notably at room temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electronic excitations in a dielectric continuum solvent with quantum Monte Carlo: Acrolein in water

We investigate here the vertical n → π{sup *} and π → π{sup *} transitions of s-trans-acrolein in aqueous solution by means of a polarizable continuum model (PCM) we have developed for the treatment of the solute at the quantum Monte Carlo (QMC) level of the theory. We employ the QMC approach which allows us to work with highly correlated electronic wave functions for both the solute ground and excited states and, to study the vertical transitions in the solvent, adopt the commonly used scheme of considering fast and slow dielectric polarization. To perform calculations in a non-equilibrium solvation regime for the solute excited state, we add a correction to the global dielectric polarization charge density, obtained self consistently with the solute ground-state wave function by assuming a linear-response scheme. For the solvent polarization in the field of the solute in the ground state, we use the static dielectric constant while, for the electronic dielectric polarization, we employ the solvent refractive index evaluated at the same frequency of the photon absorbed by the solute for the transition. This choice is shown to be better than adopting the most commonly used value of refractive index measured in the region of visible radiation. Our QMC calculations show that, for standard cavities, the solvatochromic shifts obtained with the PCM are underestimated, even though of the correct sign, for both transitions of acrolein in water. Only by reducing the size of the cavity to values where more than one electron is escaped to the solvent region, we regain the experimental shift for the n → π{sup *} case and also improve considerably the shift for the π → π{sup *} transition.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Superior dielectric properties for template assisted grown (100) oriented Gd{sub 2}O{sub 3} thin films on Si(100)

We report about the single crystalline growth and dielectric properties of Gd{sub 2}O{sub 3}(100) thin films on Si(100) surface. Using a two step molecular beam epitaxy growth process, we demonstrate that controlled engineering of the oxide/Si interface is a key step to achieve the atypical (100) oriented growth of Gd{sub 2}O{sub 3}. Unusually, high dielectric constant values (∼23–27) were extracted from capacitance voltage measurements. Such effect can be understood in terms of a two dimensional charge layer at the Gd{sub 2}O{sub 3}/Si interface (W. Sitaputra and R. Tsu, Appl. Phys. Lett. 101, 222903 (2012)) which can influence the dielectric properties of the oxide layer by forming an additional negative quantum capacitance.

36 MATERIALS SCIENCE↗

Optical analysis of TlInS{sub 2x}Se{sub 2(1−x)} mixed crystals

The ellipsometry measurements were carried out on TlInS{sub 2x}Se{sub 2(1−x)} mixed crystals in the spectral range of 1.5–6.0 eV at room temperature. The refractive index, extinction coefficient, real and imaginary parts of dielectric function were found as a result of ellipsometric measurements. The energies of interband transitions (critical point energies) of the TlInS{sub 2x}Se{sub 2(1−x)} mixed crystals were obtained by means of the second derivative of the real and imaginary parts of dielectric function. The variation of the critical point energies with the isomorphic anion substitution that is sulfur for selenium atoms was established.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electrical and dielectric properties of ZnO and CeO{sub 2} doped ZrTi{sub 2}O{sub 6} ceramic

Zirconium oxide (ZrO{sub 2}) and titanium dioxide (TiO{sub 2}) are the important catalyst supports, since it has acidic and basic properties. The intermediate phase zirconium titanate ZrTi{sub 2}O{sub 6}, which is a solid solution with Zr:Ti ratio 1:2 has outstanding dielectric properties. The effects of doping of ZnO and CeO{sub 2} on the dielectric and electrical properties of ZrTi{sub 2}O{sub 6} ceramic are investigated. On adding 0.5 wt% ZnO, the dielectric constant is increased but, on adding CeO{sub 2}, the dielectric constant is decreased. The bulk density of pure sample sintered at 1530 °C is 91% of theoretical density while that of the doped samples sintered at 1450 °C is more than 94% of theoretical density. Scanning electron micrographs reveal that the samples are well sintered with minimum porosity. The semicircle behavior in the Cole-Cole plots at room temperature reveals that the samples are good ionic conductor. The induced impedance is reduced for doped samples and this can be used as a material for electrolyte in Solid Oxide Fuel Cell.

36 MATERIALS SCIENCE↗

A study of structural, optical and dielectric properties of crystalline Sr{sub 2}Nb{sub 2}O{sub 7} nanoparticles synthesized by a modified combustion technique

Nanocrystalline Strontium Pyroniobate is synthesized by a novel auto-igniting combustion technique. The X-Ray diffraction studies reveal that Strontium Niobate possesses orthorhombic structure. Phase purity and structure of the nanopowder is further examined using Fourier-Transform Infrared and Raman spectroscopy. The average particle size of the as prepared nanoparticles from the Transmission Electron Microscopy is 30 nm. Sr{sub 2}Nb{sub 2}O{sub 7} is a photoluminescent material and the optical band gap determined from the UV-DRS spectrum is 2.7eV. The sample is sintered at an optimized temperature of 1350°C for 2 hours and obtained maximum density. The dielectric constant and loss factor values obtained at 5MHz for a well-sintered Strontium Niobate pellet is found to be 40 and 3.9×10{sup −3} respectively, at room temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural and dielectric properties of Ba{sub 0.7}Sr{sub 0.3}TiO{sub 3} thin films grown by PLD

Ferroelectric thin films of Ba{sub 0.7}Sr{sub 0.3}TiO{sub 3} (BST) were deposited on Si/SiO{sub 2}/TiO{sub 2}/Pt (PtSi) substrate by pulsed laser deposition (PLD). Crystalline films with perovskite structure were obtained without post-deposition annealing. Phase purity of the deposited films was confirmed by x-ray diffraction. The lowest value of FWHM obtained for the film deposited at oxygen pressure 5.4×10{sup −4} mbar and substrate temperature 600°C, indicates the high crystallinity of the film. The room temperature dielectric constant at 100 kHz was 85. Butterfly loop, which is the characteristic of ferroelectric materials, was obtained in the regime of −4 to +4V. The leakage current density was nearly 9×10{sup −13} Acm{sup −2}.

36 MATERIALS SCIENCE↗

Investigation of temperature dependent dielectric constant of a sputtered TiN thin film by spectroscopic ellipsometry

The temperature dependence of optical constants of titanium nitride thin film is investigated using Spectroscopic Ellipsometry (SE) between 1.4 and 5 eV in the temperature range of 300 K to 650 K in steps of 50 K. The real and imaginary parts of the dielectric functions ε{sub 1}(E) and ε{sub 2}(E) marginally increase with increase in temperature. A Drude Lorentz dielectric analysis based on free electron and oscillator model are carried out to describe the temperature behavior. With increase in temperature, the unscreened plasma frequency and broadening marginally decreased and increased, respectively. The parameters of the Lorentz oscillator model also showed that the relaxation time decreased with temperature while the oscillator energies increased. This study shows that owing to the marginal change in the refractive index with temperature, titanium nitride can be employed for surface plasmon sensor applications even in environments where rise in temperature is imminent.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The solvation radius of silicate melts based on the solubility of noble gases and scaled particle theory

The existing solubility data on noble gases in high-temperature silicate melts have been analyzed in terms of Scaling Particle Theory coupled with an ab initio assessment of the electronic, dispersive, and repulsive energy terms based on the Polarized Continuum Model (PCM). After a preliminary analysis of the role of the contracted Gaussian basis sets and theory level in reproducing appropriate static dipole polarizabilities in a vacuum, we have shown that the procedure returns Henry's law constants consistent with the values experimentally observed in water and benzene at T = 25 °C and P = 1 bar for the first four elements of the series. The static dielectric constant (ε) of the investigated silicate melts and its optical counterpart (ε{sup ∞}) were then resolved through the application of a modified form of the Clausius-Mossotti relation. Argon has been adopted as a probe to depict its high-T solubility in melts through an appropriate choice of the solvent diameter σ{sub s}, along the guidelines already used in the past for simple media such as water or benzene. The σ{sub s} obtained was consistent with a simple functional form based on the molecular volume of the solvent. The solubility calculations were then extended to He, Ne, and Kr, whose dispersive and repulsive coefficients are available from theory and we have shown that their ab initio Henry's constants at high T reproduce the observed increase with the static polarizability of the series element with reasonable accuracy. At room temperature (T = 25 °C) the calculated Henry's constants of He, Ne, Ar, and Kr in the various silicate media predict higher solubilities than simple extrapolations (i.e., Arrhenius plots) based on high-T experiments and give rise to smooth trends not appreciably affected by the static polarizabilities of the solutes. The present investigation opens new perspectives on a wider application of PCM theory which can be extended to materials of great industrial interest at the core of metallurgical processes, ceramurgy, and the glass industry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Optical properties of WO{sub 3} thin films using surface plasmon resonance technique

Indigenously assembled surface plasmon resonance (SPR) technique has been exploited to study the thickness dependent dielectric properties of WO{sub 3} thin films. WO{sub 3} thin films (80 nm to 200 nm) have been deposited onto gold (Au) coated glass prism by sputtering technique. The structural, optical properties and surface morphology of the deposited WO{sub 3} thin films were studied using X-ray diffraction, UV-visible spectrophotometer, Raman spectroscopy, and Scanning electron microscopy (SEM). XRD analysis shows that all the deposited WO{sub 3} thin films are exhibiting preferred (020) orientation and Raman data indicates that the films possess single phase monoclinic structure. SEM images reveal the variation in grain size with increase in thickness. The SPR reflectance curves of the WO{sub 3}/Au/prism structure were utilized to estimate the dielectric properties of WO{sub 3} thin films at optical frequency (λ = 633 nm). As the thickness of WO{sub 3} thin film increases from 80 nm to 200 nm, the dielectric constant is seen to be decreasing from 5.76 to 3.42, while the dielectric loss reduces from 0.098 to 0.01. The estimated value of refractive index of WO{sub 3} film is in agreement to that obtained from UV-visible spectroscopy studies. The strong dispersion in refractive index is observed with wavelength of incident laser light.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Optical isolation via unidirectional resonant photon tunneling

We show that tri-layer structures combining epsilon-negative and magneto-optical material layers can exhibit unidirectional resonant photon tunneling phenomena that can discriminate between circularly polarized (CP) waves of given handedness impinging from opposite directions, or between CP waves with different handedness impinging from the same direction. This physical principle, which can also be interpreted in terms of a Fabry-Perot-type resonance, may be utilized to design compact optical isolators for CP waves. Within this framework, we derive simple analytical conditions and design formulae, and quantitatively assess the isolation performance, also taking into account the unavoidable imperfections and nonidealities.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗