Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PARAMAGNETISM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,711 records · Page 95

Crystal Growth of Quaternary Rare Earth Selenosilicates by Using the Flux-Assisted Boron Chalcogen Mixture Method: Investigation of Their Magnetic and Optical Properties

A series of rare earth magnesium selenosilicates, RE3Mg 0.5 SiSe 7 (RE = Ce, Pr, Nd, Sm, Gd, Tb, Dy) were obtained as single crystal using the flux assisted boron chalcogen mixture (BCM) method. The structures of the crystals were determined by single-crystal X-ray diffraction. The RE3Mg 0.5 SiSe 7 series crystallizes in the hexagonal crystal system in the space group P6 3 . Polycrystalline powders were synthesized to perform physical property measurements. Magnetic measurements over the 2–300 K temperature range reveal that Ce 3 Mg 0.5 SiSe 7 and Gd 3 Mg 0.5 SiSe 7 exhibit paramagnetic behavior with negative Weiss constants (θ W = −14.50, θ W = −6.13 K, respectively). The optical properties of RE 3 Mg 0.5 SiSe 7 (RE = Ce, Pr, Nd, Sm, Gd) were measured by ultraviolet–visible (UV–vis) diffuse reflectance. Density functional theory (DFT) electronic structure calculations were performed. Furthermore, a second harmonic generation measurement was performed on a polycrystalline powder of Ce 3 Mg 0.5 SiSe 7 and was found to be SHG active with an efficiency of 0.11 times the standard potassium dihydrogen phosphate (KDP).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Crystal Growth of Quaternary RE 2 EuSi 2 S 8 ( RE = Ce–Nd, Sm, Gd, Tb) Using Flux-Assisted Boron Chalcogen Mixture (BCM) Method: Investigation of Magnetic and Luminescence Properties

A series of quaternary rare-earth containing thiosilicates with the general formula RE 2 EuSi 2 S 8 (RE = Ce–Nd, Sm, Gd, Tb) has been synthesized via the flux-assisted boron chalcogen mixture (BCM) crystal growth method. High-quality single crystals were obtained, and their crystal structures were determined by single-crystal X-ray diffraction. The RE 2 EuSi 2 S 8 series crystallizes in the trigonal system, adopting the space group R-3c. Polycrystalline samples were employed for physical property measurements, including magnetic susceptibility measurements, UV–visible diffuse reflectance, and photoluminescent response. Magnetic data of RE 2 EuSi 2 S 8 ( RE = Ce, Nd, and Gd) were collected over the 2–300 K temperature range. The samples were paramagnetic behavior with negative Weiss constants (θ W = −11.05, −10.55, and −1.35 K respectively). Their thermal stability was investigated using thermogravimetric analysis (TGA). Optical band gaps, estimated from diffuse reflectance spectra, were determined to be 2.2(1) eV for Ce 2 EuSi 2 S 8 , 1.8(1) eV for Nd 2 EuSi 2 S 8 , and 1.7(1) eV for Gd 2 EuSi 2 S 8 respectively. Finally, photoluminescence measurements were collected on Ce 2 EuSi 2 S 8 and Tb 2 EuSi 2 S 8 single crystals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High-pressure floating-zone growth of perovskite nickelate LaNiO 3 single crystals

We report the first single crystal growth of the correlated metal LaNiO 3 using a high-pressure optical-image floating zone furnace. The crystals were studied using single crystal/powder X-ray diffraction, resistivity, specific heat, and magnetic susceptibility. The availability of bulk LaNiO 3 crystals will (i) promote deep understanding in this correlated material, including the mechanism of enhanced paramagnetic susceptibility, and (ii) provide rich opportunities as a substrate for thin film growth such as important ferroelectric and/or multiferroic materials. As a result, this study demonstrates the power of high pO 2 single crystal growth of nickelate perovskites and correlated electron oxides more generally.

36 MATERIALS SCIENCE↗

Optimizing Crystal Size of Photosystem II by Macroseeding: Toward Neutron Protein Crystallography

It is known that photosystem II (PSII) catalyzes the photo-oxidation of water to molecular oxygen and protons. The water splitting reaction occurs inside the oxygen-evolving complex (OEC) via a Mn 4 CaO 5 cluster. To elucidate the reaction mechanism, detailed structural information for each intermediate state of the OEC is required. Despite the current high-resolution crystal structure of PSII at 1.85 Å and other efforts to follow the structural changes of the Mn 4 CaO 5 cluster using X-ray free electron laser (XFEL) crystallography in addition to spectroscopic methods, many details about the reaction mechanism and conformational changes in the catalytic site during water oxidation still remain elusive. In this study, we present a rarely found successful application of the conventional macroseeding method to a large membrane protein like the dimeric PSII core complex (dPSIIcc). Combining microseeding with macroseeding crystallization techniques allowed us to reproducibly grow large dPSIIcc crystals with a size of ~3 mm. These large crystals will help improve the data collected from spectroscopic methods like polarized extended X-ray absorption fine structure (EXAFS) and single crystal electron paramagnetic resonance (EPR) techniques and are a prerequisite for determining a three-dimensional structure using neutron diffraction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Na n MTh 6 F 30 : A Large Family of Quaternary Thorium Fluorides

Recently we reported the synthesis, crystal structures and magnetic properties of compounds in the Na n MU 6 F 30 series, where n = 4 or 3, and where M is a divalent or trivalent metal cation, respectively. Here in this article we advance our investigation of this structure type by expanding it to the thorium containing compounds Na n MTh 6 F 30 , where n = 3 in the case of M III = Al, Sc, Ti, V, Cr, Fe, Ga, or In; n = 4 when MII = Mg, Mn, Co, Ni, Cu, or Zn; and n varies from 3.87 to 4.39 when the M site is partially occupied by a trivalent rare earth element. Magnetic properties of the compounds containing magnetic ions M = Ti 3+ , V 3+ , Cr 3+ , Mn 2+ , Fe 3+ , Co 2+ , Ni 2+ , and Cu 2+ were studied to demonstrate that the substitution of Th(IV) for U(IV) prevents the magnetic ions from coupling magnetically and, therefore, exhibit simple paramagnetic behavior.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

One-Dimensional Quaternary and Penternary Alkali Rare Earth Thiophosphates Obtained via Alkali Halide Flux Crystal Growth

Single crystals of nine new quaternary and penternary rare earth containing thiophosphates, Cs 2 KLn(PS 4 ) 2 , Rb 3-x Na x Ln(PS 4 ) 2 (Ln = La, Nd), Rb 2 NaNd(PS 4 ) 2 , Cs 3 La(PS 4 ) 2 , Rb 3 Gd(PS 4 ) 2 , and Cs 5 NaLn 2 (PS 4 ) 4 (Ln = Gd, Tb), were grown in alkali halide eutectic fluxes. All title compounds were structurally characterized by single crystal X-ray diffraction and were found to crystallize in pseudo-one-dimensional structure types, reminiscent of those found for other known alkali rare earth thiophosphates, in a variety of space groups including monoclinic P2 1 /c, P2 1 /m, P2 1 , and orthorhombic Ccca. The crystal structures of the reported compounds are characterized by the formation of complex one-dimensional [(Ln(PS 4 ) 2 )3–] and [(Ln 2 (PS 4 ) 4 ) 6– ] anionic chains that run along the crystallographic α-axis in Cs 2 KLn(PS 4 ) 2 , Rb 3-x NaxLn(PS 4 ) 2 (Ln = La, Nd) and Rb 2 NaNd(PS 4 ) 2 , b-axis in Cs 3 La(PS 4 ) 2 and Rb 3 Gd(PS 4 ) 2 , and c-axis in Cs 5 NaLn 2 (PS 4 ) 4 (Ln = Gd, Tb). Cs 2 KLn(PS 4 ) 2 , Rb 3-x Na x Ln(PS 4 ) 2 (Ln = La, Nd), Rb 2 NaNd(PS 4 ) 2 , Rb 3 Gd(PS 4 ) 2 , and Cs 3 La(PS 4 ) 2 feature two crystallographically unique thiophosphate tetrahedra that face- and edge-share with the LnS x polyhedra forming infinite one-dimensional zigzag-like chains. This unusual face-sharing or face-grafting coordination mode of the thiophosphate group is however absent in Cs 5 NaLn 2 (PS 4 ) 4 (Ln = Gd, Tb), which exhibit only one unique phosphorus site. The magnetic susceptibility and the field-dependent magnetization were measured for Rb 2 NaNd(PS 4 ) 2 and Cs 2 KNd(PS 4 ) 2 which were found to be paramagnetic over the entire 2–300 K temperature range. Finally, optical properties of Cs 2 KNd(PS 4 ) 2 and Rb 2.65 Na 0.35 La(PS 4 ) 2 were measured by UV–vis diffuse reflectance spectrometry which revealed numerous weak absorption bands in the 300–900 nm range characteristic of the f–f electronic transitions in Nd 3+ ; Rb 2.65 Na 0.35 La(PS 4 ) 2 was found to be a semiconductor with a direct band gap of 3.60 eV.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Observation of an Unexpected n -Type Semiconducting Behavior in the New Ternary Zintl Phase Eu 3 InAs 3

The ternary arsenides Eu 3 InAs 3 and Sr 3 InAs 3 have been obtained by reactions of the elements in In flux at 1373 K. Structure elucidation by single-crystal X-ray diffraction reveals that Eu 3 InAs 3 and Sr 3 InAs 3 adopt the same orthorhombic structure (space group Pnma, Z = 4, Ca 3 AlAs 3 structure type) with unit cell parameters a = 12.9179(9) Å, b = 4.3990(3) Å, c = 13.9337(10) Å and a = 13.0218(11) Å, b = 4.4364(4) Å, c = 14.1339(12) Å, respectively. The structure consists of linear chains of corner-sharing InAs4 tetrahedra, [InAs 2 As 2/2 ] 6– , and Eu 2+ /Sr 2+ cations. Therefore, both Eu 3 InAs 3 and Sr 3 InAs 3 are valence-precise Zintl phases. As expected from the closed-shell electronic configurations, semiconducting behavior is confirmed by resistivity measurements on single crystals for both and by electronic band structure calculations for Sr 3 InAs 3 . The temperature dependence of resistivity and the computational work are in agreement that Eu 3 InAs 3 and Sr 3 InAs 3 are intrinsic semiconductors with narrow band gaps. Thermopower measurement on single-crystalline samples of Eu 3 InAs 3 shows that in the whole measured temperature range, from 300 to 700 K, the values for the Seebeck coefficient are negative. The observation of a negative Seebeck coefficient with very large absolute value (>400–500 μV K –1 at 700 K) is unexpected among the Zintl phases and suggestive that electrons are the majority charge carriers. Such a rare, n-type charge transport in an undoped compound such as Eu 3 InAs 3 , a material that has not been purposely optimized, could indicate native “defect” chemistry, and not extrinsic doping, as a reason for the unusual behavior. Here, a possible explanation involves a mixed-valent Eu 2+ /Eu 3+ state, which might be inferred from the measured effective paramagnetic moment of 7.2 μB per Eu atom, which is lower than the theoretically predicted value for free-ion moment of 7.9 μ B /Eu.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Chemical Control of Magnetism in the Kagome Metal CoSn 1 – x In x : Magnetic Order from Nonmagnetic Substitutions

As a two-dimensional structural motif, the kagome net produces many interesting magnetic and electronic properties. In particular, this lattice produces flat electronic bands with a large density of states. When the chemical potential is positioned within these flat bands, electronic instabilities can result. For the kagome metal CoSn, this alignment is not realized, the flat bands are completely filled, and the compound is a Pauli paramagnet. For this study, we have grown crystals and powders of CoSn 1 – x In x and shown that replacing Sn with In moves the chemical potential into the flat band region, as expected from simple electron counting. This is supported by band structure calculations, heat capacity measurements, and angle-resolved photoemission spectroscopy. The increased density of states results in the emergence of antiferromagnetic order evidenced by magnetic susceptibility, Mössbauer spectroscopy, and neutron diffraction data. The Néel temperature reaches a maximum of 32 K. The emergence of magnetic order when introducing a nonmagnetic element into a nonmagnetic kagome metal is striking. This work provides clear evidence that flat bands arising from electronically frustrated lattices in bulk crystals provide a new and powerful way to realize correlated ground states controlled by crystal chemistry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Facile Synthesis of Oxyhydrides by Reaction with NaBH 4 in an Open System

Oxyhydrides are an intriguing class of materials in which there is partial replacement of the oxide ion with hydride ions and oxygen vacancies. Conventional synthesis relies on vacuum sealed ampules, using long reaction times at high temperatures, limiting accessibility. Here, we demonstrate a rapid, ambient-pressure route to oxyhydride formation using NaBH 4 under flowing argon in just 1 h. This approach significantly lowers experimental barriers, enabling broader exploration of these materials. The maximum hydride incorporation, obtained using a reaction temperature of 400 °C, is given by the formula SrTiO 2.945 H 0.049 , where the hydride, oxygen vacancy, and unpaired electron concentrations are determined through thermogravimetric analysis, quantitative solid-state nuclear magnetic resonance (NMR) spectroscopy, and electron paramagnetic resonance (EPR) spectroscopy. Density functional theory simulations of the 1 H NMR shifts for candidate point defects support the assignment of the observed hydride peak, validating the efficacy of the synthetic approach. A combination of in situ and ex situ studies of the reaction pathway reveal that hydride incorporation into the perovskite occurs via direct solid-solid reaction, with higher reaction temperatures favoring NaBH 4 decomposition and H 2 (g) release over oxyhydride formation. The electronic defect structure established from the EPR and NMR studies indicate that, at ambient temperature, anion vacant sites are occupied by single electrons, whereas hydride sites do not trap electrons. As a result, this work establishes a scalable synthesis strategy and provides a computational-experimental framework for understanding defect chemistry in oxyhydrides, opening pathways for their integration into energy and electronic applications.

Anions↗

Polar materials with isolated V 4+ S = 1/2 Triangles: NaSr 2 V 3 O 3 (Ge 4 O 13 )Cl and KSr 2 V 3 O 3 (Ge 4 O 13 )Cl

Here, crystals of ASr 2 V 3 O 3 (Ge 4 O 13 )Cl, A = Na, K, were synthesized from high-temperature hydrothermal brines, and their structure and magnetic properties were investigated. These materials present a unique combination of a salt inclusion lattice, a polar crystal structure, and isolated V 4+ ( S = 1/2) trimer magnetic clusters. The structures consist of a trimeric V 3 O 13 unit based on V 4+ ( S = 1/2), having rigorous 3-fold symmetry with a short V–V separation of 3.325(3) Å. The trinuclear V 4+ units are formed by three edge shared VO 6 octahedra sharing a central μ3-oxygen atom, which also imparts a polar sense on the structure. The V 3 O 13 units are isolated from one another by tetranuclear Ge 4 O 13 units, which are similarly arranged in a polar fashion, providing a unique opportunity to study the magnetic behavior of this triangular d 1 system as a discrete unit. Magnetization measurements indicate spin-1/2 per V atom at high temperature, and spin-1/2 per V 3 trimer at low temperature, where two V moments in each triangle are antiferromagnetically aligned and the third remains paramagnetic. The crossover between these two behaviors occurs between 20 and 100 K and is well-described by a model incorporating strong antiferromagnetic intra-trimer interactions and weak but nonzero inter-trimer interactions. More broadly, the study highlights the ability to obtain new materials with interesting structure–property relationships via chemistry involving unconventional solvents and reaction conditions.

36 MATERIALS SCIENCE↗

Comprehensive Magnetic Study of Nanostructured Mesoporous Manganese Oxide Materials and Implications for Catalytic Behavior

Magnetic behavior of nanostructured mesoporous manganese oxide materials, designated UCT-1 and UCT-18, were studied using a combination of superconducting quantum interference device (SQUID) magnetometry and 55 Mn zero-field spin–echo nuclear magnetic resonance (NMR). Curie–Weiss fits to the magnetic susceptibility for the UCT-1 and UCT-18 samples calcined at 550 °C yielded paramagnetic moment values consistent with spin-only Mn 3+ ions in the α-Mn 2 O 3 phase ( S = 2, 4.90 μ B ). However, the magnetization and NMR results reported here clearly identify a small amount of the Mn 3 O 4 second phase (ferrimagnetic with T C ≈ 43 K) that does not appear in X-ray diffraction (XRD). We report the study resulted in the observation of fascinating magnetic behavior: (1) exchange bias, which occurs in cases where a ferromagnetic (or ferrimagnetic) phase forms a boundary with an antiferromagnetic phase and (2) a magnetic contribution attributed to uncompensated spins on the surfaces of the α-Mn 2 O 3 nanoparticles. The presence of Mn 3 O 4 and the interplay of Mn 3+ and Mn 2+ impact the catalytic properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Complete Dopant Substitution by Spinodal Decomposition in Mn-Doped Two-Dimensional CsPbCl 3 Nanoplatelets

The introduction of dopants plays a key role in the physical properties of semiconductors for optoelectronic applications. However, doping is generally challenging for nanocrystals (NCs), especially for two-dimensional (2D) NCs, due to the self-annealing effect and high surface energies required for dopant addition. In this paper, we report an efficient doping strategy for Mn-doped 2D CsPbCl 3 (i.e., Mn:CsPbCl 3 ) nanoplatelets (NPLs) through a postsynthetic solvothermal process. While the original lightly doped 2D Mn:CsPbCl 3 NPLs were obtained from growth doping, higher Mn doping efficiencies were achieved through diffusion doping under pressure-mediated solvothermal conditions, resulting in enhanced Mn photoluminescence (PL). Surprisingly, a new CsMnCl 3 phase with complete dopant substitution by spinodal decomposition was observed with extended solvothermal treatment, which is confirmed by powder X-ray diffraction, X-ray absorption fine structure, and electron paramagnetic resonance. Compared with Mn:CsPbCl 3 NPLs, the pure CsMnCl 3 NPLs give rise to shorter Mn PL lifetime, which is consistent with the short Mn–Mn distance within CsMnCl 3 NPLs. This work provides an efficient strategy for doping inside NCs as well as new insights on the dopant concentration-dependent structural and optical properties of perovskite NCs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Real Space Visualization of Competing Phases in La 0.6 Sr 2.4 Mn 2 O 7 Single Crystals

We report that correlated quantum materials are expected to provide the foundation for the next generation of information or energy technologies. A key feature of these materials is the proximity of multiple ground states close in energy, which results in the ability to tune properties with small changes in an external parameter such as magnetic field, composition, or temperature. For example, the colossal magnetoresistance exhibited by manganites is related to charge and orbital ordering and results from a metallic ferromagnetic phase in proximity to a paramagnetic insulating phase. The presence of competing ground states, at the heart of the physics and functionality of these materials, often results in nanoscale phase separation. Probing nanoscale phase separation with conventional diffraction techniques alone is not adequate, particularly when the domains are small or nanosized. In the present work we use a scanning transmission electron microscopy image-based technique of picometer precision strain maps (PPSM) to directly visualize the competing nanoscale phases with charge and orbital ordering in a double-layer manganite. Finally, this work underscores the role of subtle structural distortions in determining the electron physics in correlated quantum materials and provides insights into designing new functionalities via spatially tuning multiple competing ground states.

36 MATERIALS SCIENCE↗

Evolution of Surface Copper(II) Environments in Cu 2–x Se Nanoparticles

Cu 2–x Se nanoparticles are part of a promising class of alternative plasmonic materials where the location, stability, and structural impact of charge carrier generation are crucial to their optoelectronic performance. Electron paramagnetic resonance spectroscopy is used to identify the location and dynamics of Cu 2+ environments that form upon air-induced oxidation of Cu 2–x Se nanoparticles. The results indicate the formation of two distinct Cu 2+ environments at or near the surface of the nanoparticle. The first environment can be assigned to Cu 2+ bound to oleylamine capping ligands, and the second can be assigned to Cu 2+ located in CuO domains. In addition, these experiments indicate that the observed Cu 2+ environments are consistent with vacancy formation on the Cu sublattice, which are mobile (i.e., vacancy hopping) at temperatures down to 180 K. Taken together, our results elucidate time scales of air-mediated Cu oxidation in Cu 2–x Se nanoparticles, the chemical environments of the resulting Cu 2+ species, and the impact of this oxidation on the overall particle crystallographic structure and optoelectronic properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Defect-Engineered High-Entropy Spinel Oxide@Onion-Like Carbon Catalysts for High-Areal-Energy Rechargeable Zinc–Air Batteries

Rechargeable zinc-air batteries (ReZAB) have emerged as the next-generation batteries with several advantages over the conventional lithium-ion battery. In this work, single nanocrystals of inverse-type high-entropy spinel oxides (HESOx, particle size of 10−12 nm) confined in highly curved defective onion-like carbons (HESOx/OLC AT ) as efficient electrocatalysts for oxygen evolution reaction (OER), oxygen reduction reaction (ORR), and ReZAB, have been synthesized. The HESOx materials were thoroughly characterized using several analytical techniques, including X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), scanning transmission electron microscopy (STEM), Raman, and electron paramagnetic resonance (EPR). HESOx/OLC AT catalyst was tested for ReZAB using literature-recommended parameters that would allow for real technological application. These parameters include a current loading of 10 mA cm −2 and a discharge areal energy density of 35 mWh cm geometric −2 , which maps a Li-ion battery pack-level specific energy of 120 Wh kg pack −1 . HESOx/OLC AT electrocatalysts allowed for continuous discharging and charging at a current loading of 10 mA cm −2 with discharge areal energy densities between 37 and 74 mWh cm geometric −2 , thus outperforming the recommended threshold of 35 mWh cm geometric −2 . Considering that most studies (>90%) hardly meet the recommended threshold for technological application of ReZAB, the present work represents one of the top-performing electrocatalysts for ReZAB. The excellent electrocatalytic properties of defect-rich HESOx/OLC AT toward ORR/OER and ReZAB are governed by the strong electronic modulation arising from d-π hybridization, the availability of multiple catalytic sites for intermediates, and weakened d-band centers of the rate-determining intermediates (i.e., *O adsorption for ORR and *OOH formation for OER) compared to the pristine HESOx. This work introduces an effective approach for the design and synthesis of single nanocrystals of high-entropy electrocatalysts for the development of low-cost, robust, and technologically relevant rechargeable zinc−air batteries.

25 ENERGY STORAGE↗

Cr(III) adsorption by cluster formation on boehmite nanoplates in highly alkaline solution

The development of advanced functional nanomaterials for selective adsorption in complex chemical environments requires partner studies of binding mechanisms. Motivated by observations of selective Cr(III) adsorption on boehmite nanoplates (?-AlOOH) in highly caustic multicomponent solutions of nuclear tank waste, here we unravel the adsorption mechanism in molecular detail. We examined Cr(III) adsorption to synthetic boehmite nanoplates in sodium hydroxide solutions up to 3 M, using a combination of XRD, Raman, XPS, STEM, EELS, HR-AFM, TOF-SIMS, Cr K-edge XANES/EXAFS, and EPR. Adsorption isotherms and kinetics were successfully fit to Langmuir and pseudo-second-order kinetic models, respectively, consistent with monotonic uptake of Cr(OH)4- monomers until saturation coverage of approximately half the aluminum surface site density. High resolution AFM revealed monolayer cluster self-assembly on the (010) basal surfaces with increasing Cr(III) loading, possessing a structural motif similar to ?-CrOOH, stabilized by corner-sharing Cr-O-Cr bonds and attached to the surface with edge-sharing Cr-O-Al bonds. The selective uptake appears related to short-range surface templating effects, with bridging metal connections likely enabled by hydroxyl anion ligand exchange reactions at the surface. Such a cluster formation mechanism, which stops short of more laterally extensive heteroepitaxy, could be a metal discrimination mechanism more prevalent than currently recognized.

Cui, Wenwen↗