Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Notes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,711 records · Page 95
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Study of graphene p-n junctions formed by the electrostatic modification of the SiO2 substrate

Abstract We study the transport properties of mm-scale CVD graphene p-n junctions, which are formed in a single gated graphene field effect transistor configuration. Here, an electrical-stressing-voltage technique served to modify the electrostatic potential in the SiO 2 /Si substrate and create the p-n junction. We examine the transport characteristics about the Dirac points that are localized in the perturbed and unperturbed regions in the graphene channel and note the quantitative differences in the Hall effect between the perturbed and unperturbed regions. The results also show that the longitudinal resistance is highly sensitive to the external magnetic field when the Hall bar device operates as a p-n junction.

Science & Technology - Other Topics↗
DOE OSTI2025

Quantitative assessment of Ni + and He + ion irradiation damage in a tungsten heavy alloy under the simulated nuclear fusion environment

A 90W-7Ni-3Fe (wt.%) tungsten heavy alloy has been sequentially Ni + and He + ion irradiated at 700 °C to simulate the high temperature irradiation environment of a fusion reactor interior. W/Ni–Fe-W dual-phase alloys have been proposed to serve as plasma facing materials and require detailed investigation of their behavior under fusion relevant conditions to assess their overall applicability. To evaluate material performance under five years of simulated fusion reactor service, microstructural characterization of the nanoscale defect distribution has been performed on both constituent phases, revealing peak swelling in the W phase of approximately 0.03%. The γ-phase (Ni–Fe-W) is found to swell approximately 0.68% under the same irradiation conditions, indicating significant cavity formation and growth. Additionally, a novel multi-projection imaging approach has been applied to determine the extent of damage segregation along the dual-phase W-to-γ interface and exposes that these interfaces act as sink sites for the accumulation of cavities. Interphase boundaries are noted to possess an 11.8% areal coverage of defects along the boundary plane, primarily on the γ-phase side of the boundary. The accumulation of cavities at these interphase boundaries is anticipated to adversely affect overall material toughness, and this work reveals a pressing need for mechanical property testing of irradiated W–Ni-Fe dual-phase alloys.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

A Representation Fusion Framework for Decoupling Diagnostic Information in Multimodal Learning

Modern medicine increasingly relies on multimodal data, ranging from clinical notes to imaging and genomics, to guide diagnosis and treatment. However, integrating these heterogeneous data sources in a principled and interpretable manner remains a major challenge. We present MODES (Multi-mOdal Disentangled Embedding Space), a representation fusion framework that explicitly separates shared and modality-specific factors of variation, offering a structured latent space for multimodal information that improves both prediction and interpretability. By leveraging pre-trained unimodal foundation models, MODES mitigates the dependency on extensive paired datasets, crucial in data-scarce clinical settings. We introduce a masking strategy that optimizes representation dimensionality by eliminating low-information dimensions, to achieve compact, information-rich representations. Our framework demonstrates superior performance in predicting diagnoses and phenotypes compared to unimodal and conventional fusion models. MODES also enables robust diagnostic inference in missing data scenarios, offering an opportunity toward interpretable and efficient multimodal diagnostics in personalized healthcare.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2021

Global field reconstruction from sparse sensors with Veronoi tessellation-assisted deep learning

Achieving accurate and robust global situational awareness of a complex time-evolving field from a limited number of sensors has been a longstanding challenge. This reconstruction problem is especially difficult when sensors are sparsely positioned in a seemingly random or unorganized manner, which is often encountered in a range of scientific and engineering problems. Moreover, these sensors can be in motion and can become online or offline over time. The key leverage in addressing this scientific issue is the wealth of data accumulated from the sensors. As a solution to this problem, we propose a data-driven spatial field recovery technique founded on a structured grid-based deep-learning approach for arbitrary positioned sensors of any numbers. It should be noted that the naïve use of machine learning becomes prohibitively expensive for global field reconstruction and is furthermore not adaptable to an arbitrary number of sensors. In the present work, we consider the use of Voronoi tessellation to obtain a structured-grid representation from sensor locations enabling the computationally tractable use of convolutional neural networks. One of the central features of the present method is its compatibility with deep-learning based super-resolution reconstruction techniques for structured sensor data that are established for image processing. The proposed reconstruction technique is demonstrated for unsteady wake flow, geophysical data, and three-dimensional turbulence. The current framework is able to handle an arbitrary number of moving sensors, and thereby overcomes a major limitation with existing reconstruction methods. The presented technique opens a new pathway towards the practical use of neural networks for real-time global field estimation.

Fukami, Kai↗
DOE OSTI2024

Emergence of exchange bias in van der Waals magnetic alloy CrxPt1−xTe2

Abstract Cr x Pt 1− x Te 2 is a recently developed van der Waals magnetic alloy noted for its stability under ambient conditions. Here, we report the emergence of an exchange bias effect in Cr x Pt 1− x Te 2 , without typical exchange bias sources such as an adjacent antiferromagnetic layer. We find that the exchange bias is present for x = 0.45 and absent for x = 0.35, which is correlated to the presence of a Cr modulation where the Cr concentration alternates each vdW layer (modulation period of 2 layers) for x ≥ 0.4. We perform Monte Carlo simulations utilizing exchange parameters from first-principles calculations, which recreate the exchange bias in hysteresis loops of Cr 0.45 Pt 0.55 Te 2 . From our simulations, we infer the source of exchange bias to be magnetic moments locked into free energy minima that resist magnetization reversal. This work presents a way to introduce desirable magnetic properties to van der Waals magnets.

Bailey-Crandell, Ryan↗
DOE OSTI2020

Tuning the melting point of selected ionic liquids through adjustment of the cation’s dipole moment.

In prior research with thermally robust salts [Cassity et al., PCCP, 2017, 19, 31560] it was noted that an increase in the dipole moment of the cation generally led to a decrease in the melting point. Molecular dynamics simulations of the liquid state revealed that an increased dipole moment reduces cation-cation repulsions through dipole-dipole alignment. This was believed to reduce the liquid phase enthalpy, which would tend to lower the melting point of the IL. Here, we also test this principle by replacing hydrogen atoms with fluorine atoms at selected positions within the cation. This allows us to alter the electrostatics of the cation without substantially affecting the sterics. Furthermore, the strength of the dipole moment can be controlled by choosing different positions within the cation for replacement. We studied variants of four different parent cations paired with bistriflimide and determined their melting points, and enthalpies and entropies of fusion through DSC experiments. The decreases in the melting point were determined to be enthalpically driven. We found that the dipole moment of the cation, as determined by quantum chemical calculations, is inversely correlated with the melting point of the given compound. Molecular dynamics simulations of the crystalline and solid states of two isomers showed differences in their enthalpies of fusion that closely matched those seen experimentally. Moreover, this reduction in the enthalpy of fusion was determined to be caused by an increase in the enthalpy of the crystalline state. We provide evidence that dipole-dipole interactions between cations leads to the formation of cationic domains in the crystalline state. These cationic associations partially block favourable cation–anion interactions, which are recovered upon melting. If, however, the dipole- dipole interactions between cations is too strong they have a tendency to form glasses. This study provides a design rule for lowering the melting point of structurally similar ILs by altering their dipole moment.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2020

Proton affinities of pertechnetate (TcO 4 - ) and perrhenate (ReO 4 - )

The anions pertechnetate, TcO 4 - , and perrhenate, ReO 4 - , exhibit very similar chemical and physical properties. Revealing and understanding disparities between them enhances fundamental understanding of both. Electrospray ionization generated the gas-phase proton bound dimer (TcO 4 - )(H + )(ReO 4 - ). Collision induced dissociation of the dimer yielded predominantly HTcO 4 - and ReO 4 - , which according to Cooks’ kinetic method indicates that the proton affinity (PA) of TcO 4 - is greater than that of Re O 4 - . Density functional theory computations agree with the experimental observation, providing PA[TcO 4 - ] = 300.1 kcal mol -1 and PA[ReO 4 - ] = 297.2 kcal mol -1 . Attempts to rationalize these relative PAs based on elementary molecular parameters such as atomic charges indicate that the entirety of bond formation and concomitant bond disruption needs to be considered to understand the energies associated with such protonation processes. Although in both the gas and solution phases, TcO 4 - is a stronger base than ReO 4 - , it is noted that the significance of even such qualitative accordance is tempered by the very different natures of the underlying phenomena.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Observing the three-dimensional dynamics of supported metal complexes

Dynamics are intricately linked with activity and selectivity when it comes to catalysis, as noted for instance in the enzymatic principles of induced fit and allostery, and yet the range of motions heterogeneous catalytic sites are able to undergo is poorly understood. Solid-state nuclear magnetic resonance (NMR) spectroscopy is perhaps the only tool capable of probing the rapid conformational dynamics found in heterogeneous catalysts but has historically been restricted by its low sensitivity, limiting the detail with which structures can be resolved. In this work, we apply solid-state NMR and dynamic nuclear polarization, in combination with density functional theory modeling, to reveal the high-resolution structure and motional freedom of a scandium supported complex in three dimensions. The results are contrasted with the study of the analogous homoleptic complex in the crystalline state, highlighting the impacts that surface structure may have on the dynamics of supported complexes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

A high-temperature mixed potential CO gas sensor for in situ combustion control

An in situ, accurate and robust sensor that can sustain a high temperature of above 1000 °C is needed for on-site combustion monitoring because it can give real-time and local data to the control system to adjust the overall combustion efficiency. In this work, we find that nickel oxide (NiO) is a promising sensing material for CO which is a direct indicator of the status of the combustion process of a power plant. Under the conditions of 0.5–3% O 2 and 1000 °C, the fabricated yttrium-stabilized zirconia (YSZ)-based mixed potential sensor using porous NiO demonstrates good sensitivity to CO, showing a signal as high as 36 mV to 1000 ppm CO. The effects of gas transport, structure and geometry of the NiO electrode on the sensing performance are studied. Results show that fast gas transport is much beneficial to improved sensitivity. NiO having a porous structure is much more sensitive to CO than that having a dense structure. But the t90 (time to achieve 90% final signal magnitude) of the former is much longer due to slower gas diffusion inside the pores. It's worth noting that the NiO sensor exhibits a positive relationship with the CO content, opposite to other reported results of mixed potential sensors to detect CO. We find that this might be due to the electrochemical reduction, instead of oxidation of CO during the interaction with NiO at 1000 °C. Selectivity tests on how CO 2 , CH 4 and steam affect CO sensing are also demonstrated. NiO is insensitive to even 10% CO 2 . CH 4 does not shift the average value of the CO sensing response. However, it makes the sensing signal fluctuate more intensively. 2% steam exerts a great influence on NiO sensitivity to CO: it magnifies the sensitivity of the porous NiO electrode to a low CO range of 0–100 ppm, but inhibits its sensitivity to a CO range of 100 ppm to 1000 ppm. Lastly, an 11 day stability test demonstrates the promising stability property of the proposed NiO-based YSZ sensor.

20 FOSSIL-FUELED POWER PLANTS↗
DOE OSTI2020

Integrated linker-regulation and ring-fusion engineering for efficient additive-free non-fullerene organic solar cells

The rational molecular design and structural modification of quasi-two-dimensional fused perylene diimide (quasi-2D FPDI) acceptors have received growing attention for application in non-fullerene organic solar cells (NF-OSCs). Herein, we designed and synthesized two pairs of FPDI acceptors, one in the form of FPDI–π-bridge–FPDI with the π-bridge being either an axisymmetric thiophene (T) or a centrosymmetric thienothiophene (TT) unit, and the other being the corresponding ring-fusion counterpart. Additionally, four small molecule acceptors, namely T-FPDI, TT-FPDI, FT-FPDI and FTT-FPDI, were paired with a common PTB7-Th polymeric electron donor as active materials for a comparative study of the effects of linkers and ring fusion on their photovoltaic performances. The T-FPDI-based NF-OSC exhibited a decent power conversion efficiency (PCE) of 5.50%, while a higher PCE of 7.17% with a simultaneous enhancement in the open circuit voltage ( V oc ), the short-circuit current density ( J sc ) and the fill factor (FF) was achieved for the TT-FPDI-based solar cells. The solar cells based on the ring-fused FT-FPDI and FTT-FPDI acceptors displayed PCEs of 6.75% and 7.66%, respectively, both higher than those of the corresponding non-fused counterparts. Notably, the trade-off between the J sc and V oc , commonly observed in fullerene OSCs, is alleviated in these systems. It is also worth noting that the NF-OSCs based on these FPDI acceptors do not need any solvent additives. Overall, this successful molecular engineering based on novel quasi-2D FPDI building blocks may inspire the development of emergent electron acceptors for high performance additive-free NF-OSCs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Coordination and thermophysical properties of select trivalent lanthanides in LiCl–KCl

The coordination chemistry of various fission and decay products, such as actinides and lanthanides, are crucial to the commercial deployment of molten salt reactors as they can affect the thermophysical properties. In this report we examined the structure, coordination environment, and physical properties such as the density and the vibrational density of states for three lanthanide species, namely Ce, Eu, and Sm in the LiCl–KCl eutectic system using a combination of quantum mechanics simulations and spectroscopic experiments. Quantum mechanics molecular dynamics (QM-MD) modelling was employed to determine the physical properties of each system resulting in accurate local coordination of each species. Then, the vibrational density of states (DOS) was determined using a two-phase thermodynamic modelling which was then compared to the experimentally obtained Raman spectra of the species in molten LiCl–KCl having the eutectic composition. We find that Ce 3+ , Eu 3+ and Sm 3+ all adopt octahedral local coordination environments in the eutectic salt composition in good agreement with experimental results. Ce3+ is found to fluctuate between an octahedral six-coordinated and a seven-coordinated structure due to the increased local proximity of Cl in the eutectic salt, resulting in a lower fluidicity/diffusivity than the other trivalent lanthanides studied. The thermophysical properties of the eutectic composition with trivalent lanthanides were not significantly different from the pure eutectic salt composition, but several changes were noted.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Actinide arene-metalates: ion pairing effects on the electronic structure of unsupported uranium–arenide sandwich complexes

Addition of [UI 2 (THF) 3 (μ-OMe)] 2 ·THF (2·THF) to THF solutions containing 6 equiv. of K[C 14 H 10 ] generates the heteroleptic dimeric complexes [K(18-crown-6)(THF) 2 ] 2 [U(η 6 -C 14 H 10 )(η 4 -C 14 H 10 )(μ-OMe)] 2 ·4THF (1 18C6 ·4THF) and {[K(THF) 3 ][U(η 6 -C 14 H 10 )(η 4 -C 14 H 10 )(μ-OMe)]} 2 (1 THF ) upon crystallization of the products in THF in the presence or absence of 18-crown-6, respectively. Both 1 18C6 ·4THF and 1 THF are thermally stable in the solid-state at room temperature; however, after crystallization, they become insoluble in THF or DME solutions and instead gradually decompose upon standing. X-ray diffraction analysis reveals 1 18C6 ·4THF and 1 THF to be structurally similar, possessing uranium centres sandwiched between bent anthracenide ligands of mixed tetrahapto and hexahapto ligation modes. Yet, the two complexes are distinguished by the close contact potassium-arenide ion pairing that is seen in 1 THF but absent in 1 18C6 ·4THF, which is observed to have a significant effect on the electronic characteristics of the two complexes. Structural analysis, SQUID magnetometry data, XANES spectral characterization, and computational analyses are generally consistent with U(IV) formal assignments for the metal centres in both 1 18C6 ·4THF and 1 THF , though noticeable differences are detected between the two species. For instance, the effective magnetic moment of 1 THF (3.74 μ B ) is significantly lower than that of 1 18C6 ·4THF (4.40 μ B ) at 300 K. Furthermore, the XANES data shows the U L III -edge absorption energy for 1 THF to be 0.9 eV higher than that of 1 18C6 ·4THF, suggestive of more oxidized metal centres in the former. Of note, CASSCF calculations on the model complex {[U(η 6 -C 14 H 10 )(η 4 -C 14 H 10 )(μ-OMe)] 2 } 2– (1*) shows highly polarized uranium–arenide interactions defined by π-type bonds where the metal contributions are primarily comprised by the 6d-orbitals (7.3 ± 0.6%) with minor participation from the 5f-orbitals (1.5 ± 0.5%). These unique complexes provide new insights into actinide–arenide bonding interactions and show the sensitivity of the electronic structures of the uranium atoms to coordination sphere effects.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Mixed oxides as multi-functional reaction media for chemical looping catalysis

Over the past two decades, chemical looping combustion (CLC) has been extensively investigated as a promising means to produce electric power while generating a concentrated carbon dioxide stream for sequestration. We note that the chemical looping strategy can be extended well outside of combustion-based carbon capture. In fact, application of the chemical looping strategy in areas beyond combustion can result in somewhat unexpected energy and carbon dioxide savings without producing a concentrated CO 2 stream at all. Furthermore, it allows the looping-based technologies to tap into applications such as chemical production – a $\$$4 trillion per year industrial sector with high energy and carbon intensities. Here, the key resides in the design of effective oxygen carriers, also known as redox catalysts in the context of selective chemical conversion through chemical looping catalysis (CLCa). This contribution focuses on the design and applications of mixed oxides as multi-function reaction media in CLCa. Since typical mixed oxide oxygen carriers tend to be nonselective for hydrocarbon conversion, the first part of this article presents generalized design principles for surface modification of mixed oxides to improve their selectivity and catalytic activity. Applications of these redox catalysts in chemical looping – oxidative dehydrogenation (CL-ODH) of a variety of light alkanes and alkyl-benzenes are presented. This is followed with a discussion of computation assisted mixed oxide design based upon thermodynamic criteria. Finally, a few new directions for the chemical looping technologies are introduced.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Antioxidant-induced transformations of a metal-acid hydrocracking catalyst in the deconstruction of polyethylene waste

Plastics are ideal for numerous applications, as driven by the development of complex formulations containing various additives to improve performance and processability. Unfortunately, chemical valorization strategies (e.g., catalytic deconstruction) often can be challenged by the presence of small-molecule additives, and quantification of the impact of these molecular constituents on upcycling processes remains elusive. Here, this dearth of information restricts catalyst design efforts to combine the robustness and performance necessary to improve plastics circularity. In this communication, we describe a systematic study of common plastics additives—phenolic antioxidants, and we quantify the relationship between additive content and deconstruction yields of high-density polyethylene (HDPE) over a platinum on tungstated zirconium (Pt/WO 3 /ZrO 2 ) hydrocracking catalyst. In the simplest case of a base (antioxidant- and slip agent-containing) HDPE resin versus a pure (additive-stripped) HDPE polymer, a two-fold decrease in the yield of gas and liquid products is noted for base HDPE resin. Furthermore, both antioxidant chemistry and concentration strongly impact conversion and individual product selectivities. Using infrared spectroscopy, we determine that antioxidants change the effective ratio of metal to acid sites (i.e., metal-acid balance) through reactions of phenols and/or other functional groups (e.g., acids, esters) with catalyst active sites. Overall, this work demonstrates the impact of one common set of additives on plastics deconstruction, and the analysis herein provides a blueprint for quantitatively assessing the effects of additives on plastics deconstruction processes and for evaluating the development of more robust catalytic strategies or more tolerable additive formulations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

First-principles study of the defect-activity and optical properties of FAPbCl 3

With promising solar cell applications, organic–inorganic lead halide perovskites belong to a novel and rapidly developing class of semiconducting materials. Unlike its well-investigated iodide counterparts, formamidinium lead chloride (FAPbCl 3 ) is a much less studied perovskite that shows superior stability and surprisingly high selectivity and sensitivity towards certain gas analytes. The origin of the sensing ability of this perovskite material can be traced to its high defect tolerance and the existence of some defects which act as the “lock” to a certain gas analyte's “key”. In this work, we deepen the understanding of this proven perovskite sensor through first-principles computational study of its defect formation energies, charge transition energies, and optical properties. These studies are done with the widely used GGA exchange–correlation functional PBE and the newer meta-GGA functional SCAN, both incorporating the Grimme's D3 dispersion correction. Additionally, we also consider experimental conditions and the effect of temperature on electron screening in the simulations, which demonstrates that screening is particularly important when considering high oxidation states of the defects. We also note the importance of antisites in the Fermi Pinning as well as the importance of FA disorder, which are previously unreported insights.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Classification of gaseous UF 6 assay by femtosecond LIBS in the 424.4 nm spectral region using numerical HOGSVD-DTW features

This technical note presents experimental results using numerical features of fs-LIBS data to classify the assay value of a gaseous UF 6 material. Here, the data-driven feature vectors are computed by Higher Order Generalized Singular Value Decomposition (HOGSVD) and Dynamic Time Warp (DTW). The method achieves 96.97% accuracy in spectral classification testing with fs-LIBS samples obtained from a UF 6 material with five known assay values ranging from 0.287% to 61.740%, with 100% accuracy for the four largest assay values ranging from 4.615% to 61.740%.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2023

Understanding and controlling lithium morphology in solid polymer and gel polymer systems: mechanisms, strategies, and gaps

Lithium metal anode promises the highest theoretical energy density and may enable high energy designs such as lithium–sulfur and lithium–air batteries. However, stable lithium plating and stripping remains a challenge in all electrolyte systems including liquids, polymers, and ceramic electrolytes. In this perspective, we examine literature studies of lithium morphologies in solid polymer and gel polymer systems and compare that with well-studied liquid electrolytes. In solid polymer electrolytes, current density and mechanical properties are both governing parameters for lithium morphology, differing from conventional liquid electrolytes. Stable lithium electrodeposition may be accomplished by a polymer electrolyte with good stiffness operating at significantly lower current densities than its limiting current density, which is defined by the Sand equation. In gel polymer electrolytes, the reported lithium morphology is more similar to that in liquid electrolytes, suggesting similar nucleation and growth mechanisms. Based on experimental evidence and theoretical guidance, current strategies to control lithium morphology in solid polymer and gel polymer electrolytes are summarized. The limitations of these strategies are discussed. In particular, we note the knowledge gap in understanding the solid electrolyte interphase in solid polymer systems and the critical role it can play in regulating lithium morphologies.

36 MATERIALS SCIENCE↗