Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Nano structures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,711 records · Page 95

To study the effect of dopant NiO concentration and duration of calcinations on structural and optical properties of MgO-NiO nanocomposites

In present work Magnesium oxide (MgO) samples were doped with different concentration of Transition metal Nickel Oxide(NiO) by using Chemical co-precipitation method. The doping levels were varied from NiO (5%, 10%, 15%) and all the samples were calcined at 600°C for 4hrs and 8hrs respectively. Structural analysis of these calcined materials is carried out by X-ray diffraction (XRD) techniques which reveals that average crystalline sizes are in nano region i.e. 21.77nm-31.13 nm and tabulated in table 1. The powder of calcined samples were also characterized by using various other techniques i.e. Scanning Electron Microscopy (SEM), Fourier Transformation Infrared Spectroscopy (FTIR), UV-Visible spectroscopy, Transmission Electron Microscopy (TEM) etc. The effects of dopant concentration, calcined temperature, calcinations duration on samples were studied and also investigate the effect of varying dopant concentration on morphology and optical properties of calcined nanomaterials. From results it was observed that the crystallite size of nanocomposites increases with increases dopant concentration or increases calcinations duration. The optical band gap decreases with increases sintering time and increase with increases dopant concentrations. TEM results coincide with XRD results and show that particles are polycrystalline in nature. FTIR spectra show that for all samples particles are pure in composition and transmission rate increases with calcinations duration.

36 MATERIALS SCIENCE↗

Two-dimensional silk

Despite the promise of silk-based devices, the inherent disorder of native silk limits performance. Here, we report highly ordered two-dimensional silk fibroin (SF) films grown epitaxially on van der Waals (vdW) substrates. Using atomic force microscopy, nano–Fourier transform infrared spectroscopy, and molecular dynamics, we show that the films consist of lamellae of SF molecules that exhibit the same secondary structure as the nanocrystallites of native silk. Increasing the SF concentration results in multilayers that grow either by direct assembly of SF molecules into the lamellae or, at high concentrations, along a two-step pathway beginning with a disordered monolayer that then crystallizes. Scanning Kelvin probe measurements show that these films substantially alter the surface potential; thus, they provide a platform for silk-based electronics on vdW solids.

36 MATERIALS SCIENCE↗

Modeling Hierarchical Non-Precious Metal Catalyst Cathodes for PEFCs Using Multi-Scale X-ray CT Imaging

This paper reports the development of a model for simulating polymer electrolyte fuel cells (PEFCs) with non-precious metal catalyst (NPMC) cathodes. NPMCs present an opportunity to dramatically reduce the cost of PEFC electrodes by removing the costly Pt catalyst. To address the significant transport losses in thick NPMC cathodes (ca. >60 µm), we developed a hierarchical electrode model that resolves the unique structure of the NPMCs we studied. A unique feature of the approach is the integration of the model with morphology data extracted from nano-scale resolution X-ray computed tomography (nano-CT) imaging of the electrodes. A notable finding is the impact of the liquid water accumulation in the electrode and the significant performance improvement possible if electrode flooding is mitigated.

30 DIRECT ENERGY CONVERSION↗

Hierarchically-Structured Ti/TiO 2 Electrode for Hydrogen Evolution Synthesized via 3D Printing and Anodization

Hierarchically-structured, electro-catalysts consisting of a titanium core with controlled macro-porosity and a thin titania surface-layer with controlled nano-porosity were synthesized via combination of additive manufacturing and in-situ anodization. The electrodes were tested for hydrogen evolution reaction and depicted competitive electro-catalytic activities, with Tafel slopes between 40 and 56 mV dec -1 . The electrodes also depicted competitive onset and over potentials when compared with other electrode alternatives. The synthesis approach for the electro-catalysts reported in this work is being extended to other metal/metal-oxide pairs and applications.

36 MATERIALS SCIENCE↗

Development of bismuth tellurium selenide nanoparticles for thermoelectric applications via a chemical synthetic process

Research highlights: {yields} We synthesized a Bi{sub 2}Te{sub y}Se{sub 3-y} nano-compound via a chemical synthetic process. {yields} The compound was sintered to achieve an average grain size of about 300 nm. {yields} The resulting sintered body showed very low thermal conductivity. It is likely caused by the vigorous phonon scattering of the nano-sized grains. -- Abstract: Bismuth tellurium selenide (Bi{sub 2}Te{sub y}Se{sub 3-y}) nanoparticles for thermoelectric applications are successfully prepared via a water-based chemical reaction under atmospheric conditions. The nanostructured compound is prepared using a complexing agent (ethylenediaminetetraacetic acid) and a reducing agent (ascorbic acid) to stabilize the bismuth precursor (Bi(NO{sub 3}){sub 3}) in water and to favor the reaction with reduced sources of tellurium and selenium. The resulting powder is smaller than ca. 100 nm and has a crystalline structure corresponding to the rhombohedral Bi{sub 2}Te{sub 2.7}Se{sub 0.3}. The nanocrystalline powder is sintered via a spark plasma sintering process to obtain a sintered body composed of nano-sized grains. Important transport properties of the sintered body are measured to calculate its most important characteristic, the thermoelectric performance. The results demonstrate a relationship between the nanostructure of the sintered body and its thermal conductivity.

36 MATERIALS SCIENCE↗

P[subscript H2O]-dependent structural phase transitions in the zeolite mesolite: Real- and reciprocal-space crystal structure refinements

The response of the mesolite crystal structure (Na{sub 16}Ca{sub 16}Al{sub 48}Si{sub 72}O{sub 240}{center_dot}64H{sub 2}O) to dehydration was evaluated as a function of temperature and partial pressure of water (i.e., P{sub H{sub 2}O} or relative humidity, RH) using laboratory X-ray powder diffraction (XRD; CuK{sub {alpha}} radiation) and synchrotron X-ray pair distribution function (PDF) methods. At 425 C under low-P{sub H{sub 2}O} conditions (P{sub H{sub 2}O} {le} {approx}1.3 mbar), dehydrated mesolite preserved the long-range ordered aluminosilicate framework structure, which has not been previously observed. This new dehydrated phase, x-metamesolite, has unit-cell parameters [a = 16.731(3) {angstrom}, b = 17.822(2) {angstrom}, c = 6.312(1) {angstrom}, V = 1882.5(5) {angstrom}{sup 3}, and possible space group Fdd2] similar to those of other dehydrated natrolite phases (either 1- or 2-metanatrolite). Conversely, under high-P{sub H{sub 2}O} conditions (P{sub H{sub 2}O} > {approx}1.3 mbar), dehydrated mesolite became amorphous (amorphous T{sub 5}O{sub 10}) at 425 C. The local structure of amorphous T{sub 5}O{sub 10} was characterized by PDF analyses, which showed the formation of twisted T{sub 5}O{sub 10} nano-fibers [with dimensions (LWH) of {approx}6.9 x 6.9 x 6.3 {angstrom}] resulting from breakage of the mesolite aluminosilicate framework. The two distinct high-temperature P{sub H{sub 2}O}-dependent phase transition paths illustrate the importance of considering the combined effects of temperature and P{sub H{sub 2}O} in mesolite. In addition, the low-temperature phase transition in mesolite, involving order-disorder of the extraframework cations, also showed a P{sub H{sub 2}O}-dependent transition temperature. Although, there is no path dependence on P{sub H{sub 2}O} for this transition, the local arrangement of Na, Ca, and vacancies in disordered metamesolite (formed through the extraframework cation order-disorder phase transition) likely influences the thermal stability of the aluminosilicate framework during further heating.

36 MATERIALS SCIENCE↗

Investigation of the oxide film on 308L weld surface produced during welding process

Highlights: • Double layer film formed under welding of no shielding was first deeply studied. • Micro-cracks and nano-scale gaps were found in outer and inner layer. • Outer layer was composed of Fe{sub 2}O{sub 3}, inner layer included Fe{sub 3}O{sub 4} and FeCr{sub 2}O{sub 4.} • Cr deficiency of film related to the volatilization of CrO{sub 3} over 1000 °C. • Oxidation rule of 308L weld during GTAW was found based on thermodynamics. The oxide film formed during welding on the inner surface of 308L weld was investigated. The morphology, composition and structure of the oxide film were characterized by optical microscopy, scanning electron microscopy, laser Raman spectroscopy, X-ray diffraction, Auger electron spectroscopy and transmission electron microscopy. The results indicated that the oxidation degree of the weld metal was generally uniform from the weld center to the fusion line. Micro-scale cracks were found on the outer surface of the oxide film and nano-scale gaps scattered on the inner oxide film-weld interface. The oxide film exhibited a duplex structure including outer and inner layers. The outer layer, made of tightly bound particles, was mainly composed of Fe{sub 2}O{sub 3} oxide particles with a diameter of 50–150 nm. And the inner layer, made of relative loosely bound particles, was mainly composed of Fe{sub 3}O{sub 4} and FeCr{sub 2}O{sub 4} oxide particles with a diameter of 10–50 nm. The corresponding oxidation behavior and mechanism of the oxide film were also discussed.

36 MATERIALS SCIENCE↗

Carbon nanotube coated metal mesh: Bridging nanoscale and macroscale

A novel hybrid structure has been developed by growing carbon nanotubes (CNTs) on a metal mesh that functions as a literally unlimitedly extendable backbone. This hybrid material structure provides a new approach of extending CNTs’ advantageous properties such as ultrahigh thermal and electrical conductivities, high sensitivity to gases, and distinctive wettability for different liquids with chemical inertness to macroscale—otherwise available only in nano- and microscales. In this feasibility work, CNTs were grown on a Type 316 stainless steel (SS) mesh by self-catalytical chemical vapor deposition (CVD) without the need of an externally added catalyst or catalyst support. For the radially aligned and entangled CNT forest on the SS mesh, the average CNT diameter is around 50 nm, while the length varies from 20 to 25 µm. High-resolution transmission electron microscopy analysis revealed the multiwall structure of the CNTs with >30 rolled-up graphitic sheets. Raman spectra of the CNTs showed a dominant G band, indicating a well-ordered graphitic nanostructure. Being highly hydrophobic with a water contact angle of ∼145° and oleophilic, the CNT-coated SS mesh could be used in fluid separation and organic contaminant removal from water. Moreover, CNTs are recognized for their exceptional thermal conductivity and the CNT-coated mesh offers a supportive structure with directly connected CNTs for efficient heat transfer. Proof of concept has been achieved for the CNT-coated mesh’s potentials as a liquid filter and an thermal interface material (TIM). Specifically, the CNT-coated mesh demonstrated the capability of capturing water from a water-organic mixture with a 100 % efficiency while allowing organic liquids to pass through the filter. Furthermore, when used as a TIM, the CNT-coated mesh reduced the interfacial thermal impedance by >30 %.

Carbon nanotubes (CNTS)↗

Manifold projection image segmentation for nano-XANES imaging

As spectral imaging techniques are becoming more prominent in science, advanced image segmentation algorithms are required to identify appropriate domains in these images. We present a version of image segmentation called manifold projection image segmentation (MPIS) that is generally applicable to a broad range of systems without the need for training because MPIS uses unsupervised machine learning with a few physically motivated hyperparameters. We apply MPIS to nanoscale x-ray absorption near edge structure (XANES) imaging, where XANES spectra are collected with nanometer spatial resolution. We show the superiority of manifold projection over linear transformations, such as the commonly used principal component analysis (PCA). Moreover, MPIS maintains accuracy while reducing computation time and sensitivity to noise compared to the standard nano-XANES imaging analysis procedure. Finally, we demonstrate how multimodal information, such as x-ray fluorescence data and spatial location of pixels, can be incorporated into the MPIS framework. We propose that MPIS is adaptable for any spectral imaging technique, including scanning transmission x-ray microscopy, where the length scale of domains is larger than the resolution of the experiment.

36 MATERIALS SCIENCE↗

Monte Carlo random walk simulation of electron transport in confined porous TiO{sub 2} as a promising candidate for photo-electrode of nano-crystalline solar cells

Monte Carlo continuous time random walk simulation is used to study the effects of confinement on electron transport, in porous TiO{sub 2}. In this work, we have introduced a columnar structure instead of the thick layer of porous TiO{sub 2} used as anode in conventional dye solar cells. Our simulation results show that electron diffusion coefficient in the proposed columnar structure is significantly higher than the diffusion coefficient in the conventional structure. It is shown that electron diffusion in the columnar structure depends both on the cross section area of the columns and the porosity of the structure. Also, we demonstrate that such enhanced electron diffusion can be realized in the columnar photo-electrodes with a cross sectional area of ∼1 μm{sup 2} and porosity of 55%, by a simple and low cost fabrication process. Our results open up a promising approach to achieve solar cells with higher efficiencies by engineering the photo-electrode structure.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Encapsulation of Polythiophene by Glycopolymer for Water Soluble Nano-wire

A water-soluble polythiophene (PT) was prepared by the self-assembling complex with a glycopolymer. The glycopolymer of poly(N-p-vinylbenzyl-D-lactonamide) (PVLA) formed self-assembling cylindrical structure based on the amphiphilicity even after the complexation with PT. We confirmed the improved optical functionality of PT due to the longer conjugated {pi}-orbital. It suggested that PT behaved like molecular nanowire with the self-assembled structure in the hydrophobic core of PVLA. PVLA-PT also showed specific biorecognition against corresponding lectin. These results suggested that the bioactive nanowire formation of PT with the glycopolymer was developed.

36 MATERIALS SCIENCE↗

Effect of Processing on Precipitation Kinetics in Nano Polycrystalline 7075 Aluminum Alloy

Fairmount Technologies (FT) seeks to optimize the thermomechanical processing of Aluminum Alloy 7075. The target yield strength is 20% higher than commercially available 7075-T6 temper sheet which will enable structural light weighting by a similar magnitude and reduce the carbon footprint of the transportation sector. To reduce processing cost and make this commercially viable, it is important to understand physical mechanisms driving microstructural changes. A mesoscale phase-field model seeded with experimentally measured microstructures and assessed thermodynamic and kinetic properties will be developed and exercised using HPC at PNNL. It will account for the effect of deformation, temperature, and chemistry on precipitation kinetics in nanocrystalline microstructures. Our objective is to understand this “stress-aging” coupling by performing parametric simulations with mesoscale models for a better understanding of GP zone and η' formation in nanocrystalline 7075 Al. This will help FT optimize processing schedules to achieve desired microstructures that increase both strength and ductility.

36 MATERIALS SCIENCE↗

Energy Dissipation and Defect Generation for Nanocrystalline Silicon Carbide

Large-scale molecular dynamics simulations have been employed to study defect generation and primary damage state in nano crystalline (NC) SiC of average grain diameters from 5 to 21 nm. Primary knock-on atom (PKA) kinetic energies of 10 keV are simulated, and cascade structures in NC SiC with a grain size smaller than 12 nm are generally different from those generated in single crystalline SiC. It is found that the local stresses near the grain boundaries (GBs) strongly affect the behavior of the PKA and secondary recoil atoms (SRAs), and the GBs act as sinks for deposition of kinetic energy. A striking feature is that the PKA and SRAs preferentially deposit energy along the GBs for grains with average size less 12 nm, which results in atomic displacements primarily within the GBs; whereas for larger grain sizes, most defects are produced within the grains. There exists a crossover in defect production, which is manifested in switching from grain boundary damage to grain damage. The most common defects created in NC SiC are antisite defects, following by vacancies and interstitials, in contrast to those produced in a single crystalline SiC, where the dominate defects are Frenkel pairs. Defect production efficiency increases with increasing the grain size, with a typical value of 0.18 for small grains and rising to 0.5 for larger grains.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Microstructure tuning facilitated photo-efficiency enhancement and environmental benign nature of HfO2/Mo/HfO2 multilayer films

Nano-layered, multilayered ?lms consisting of HfO2(dielectric)/Mo(metal)/HfO2(dielectric), (D/M/D archi-tecture) with controlled layer thickness, chemistry and microstructure were demonstrated for e?cient utiliza-tion of solar energy with well-designated spectral control. The e?ect of Mo metal interlayer on the energy performance and e?ciency of HfO2/Mo/HfO2 multilayer ?lms made by electron-beam deposition onto silicon and glass substrates has been evaluated. The Mo interlayer thickness [Mo(t)] was varied in the range of 5–25 nm while the top/bottom HfO2 layer thickness was kept constant at ~50 nm. Structural, morphological and optical characterization was performed to understand the e?ect of Mo(t) induced microstructure on mechanical dur-ability and optical behavior of the D/M/D multilayer ?lms. Structural studies revealed that D/M/D multilayer ?lms with relatively low Mo(t) were amorphous, while higher Mo(t) induces the amorphous-to-nanocrystalline microstructure transformation, which also induces surface roughening e?ects. The D/M/D multilayer ?lm with Mo(t) = 20 nm, where the nano-columnar morphology of the D-M-D layers are aligned perpendicular to the substrate surface and exhibits the optimum spectral selectivity. Such microstructure and morphological tailoring also facilitates the environmentally friendly (self-cleaning/stain repellent) nature of these multilayer ?lms by the high contact angle (~102°) achieved. Molybdenum interlayer facilitated higher contact angle leads to super-hydrophobic nature of the HfO2/Mo/HfO2 multilayered ?lm surfaces. The low surface roughness values (0.2–0.8 nm), which are primarily due to Mo at the interface, of the HfO2/Mo/HfO2 multilayered ?lms satisfy the general requirements of heat mirror applications. In addition, the microstructure of intermediate Mo layer and HfO2-Mo interfaces signi?cantly control the mechanical properties of D/M/D multilayer ?lms. Optimal me-chanical properties (hardness = 30 GPa, elastic modulus = 312 GPa, wear resistance = 0.094, adhesion strength = 2050 µN) have been obtained for Mo(t) = 20 nm D/M/D multilayer ?lm. The mechanical response strongly supports ?exible and wear resistive nature of HfO2/Mo/HfO2 multilayer ?lms.

Dubey, P↗

Effect of bath temperature on structure, morphology and thermoelectric properties of CoSb{sub 3} thin films

CoSb{sub 3} thin films are deposited on conducting glass substrates (FTO) by electrodeposition at different bath temperatures (60°C, 70°C and 80°C) and the resulting influence of the bath temperature on the structure, morphology and electrical properties of films is investigated. X-ray diffraction confirms the formation of CoSb{sub 3} phase in the films. Scanning electron microscopy reveals that different morphologies ranging from branched nano-flakes to nano-needles evolve as bath temperature increases. It is concluded that a growth temperature of 80°C is suitable for producing CoSb{sub 3} films with such properties that show potential feasibility for thermoelectric applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Intense fusion neutron sources

The review describes physical principles underlying efficient production of free neutrons, up-to-date possibilities and prospects of creating fission and fusion neutron sources with intensities of 10{sup 15}-10{sup 21} neutrons/s, and schemes of production and application of neutrons in fusion-fission hybrid systems. The physical processes and parameters of high-temperature plasmas are considered at which optimal conditions for producing the largest number of fusion neutrons in systems with magnetic and inertial plasma confinement are achieved. The proposed plasma methods for neutron production are compared with other methods based on fusion reactions in nonplasma media, fission reactions, spallation, and muon catalysis. At present, intense neutron fluxes are mainly used in nanotechnology, biotechnology, material science, and military and fundamental research. In the near future (10-20 years), it will be possible to apply high-power neutron sources in fusion-fission hybrid systems for producing hydrogen, electric power, and technological heat, as well as for manufacturing synthetic nuclear fuel and closing the nuclear fuel cycle. Neutron sources with intensities approaching 10{sup 20} neutrons/s may radically change the structure of power industry and considerably influence the fundamental and applied science and innovation technologies. Along with utilizing the energy produced in fusion reactions, the achievement of such high neutron intensities may stimulate wide application of subcritical fast nuclear reactors controlled by neutron sources. Superpower neutron sources will allow one to solve many problems of neutron diagnostics, monitor nano-and biological objects, and carry out radiation testing and modification of volumetric properties of materials at the industrial level. Such sources will considerably (up to 100 times) improve the accuracy of neutron physics experiments and will provide a better understanding of the structure of matter, including that of the neutron itself.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Nonlinear Nano‐Imaging of Interlayer Coupling in 2D Graphene‐Semiconductor Heterostructures

The emergent electronic, spin, and other quantum properties of 2D heterostructures of graphene and transition metal dichalcogenides are controlled by the underlying interlayer coupling and associated charge and energy transfer dynamics. However, these processes are sensitive to interlayer distance and crystallographic orientation, which are in turn affected by defects, grain boundaries, or other nanoscale heterogeneities. This obfuscates the distinction between interlayer charge and energy transfer. Here, nanoscale imaging in coherent four‐wave mixing (FWM) and incoherent two‐photon photoluminescence (2PPL) is combined with a tip distance‐dependent coupled rate equation model to resolve the underlying intra‐ and inter‐layer dynamics while avoiding the influence of structural heterogeneities in mono‐ to multi‐layer graphene/WSe 2 heterostructures. With selective insertion of hBN spacer layers, it is shown that energy, as opposed to charge transfer, dominates the interlayer‐coupled optical response. From the distinct nano‐FWM and ‐2PPL tip‐sample distance‐dependent modification of interlayer and intralayer relaxation by tip‐induced enhancement and quenching, an interlayer energy transfer time of τ ET ≈ ( 0 . 35 − 0.15 + 0.65 ) $\tau _{\rm ET} \approx (0.35^{+0.65}_{-0.15})$ ps consistent with recent reports is derived. As a local probe technique, this approach highlights the ability to determine intrinsic sample properties even in the presence of large sample heterogeneity.

77 NANOSCIENCE AND NANOTECHNOLOGY↗