Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Modelling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,711 records · Page 95

A GALACTIC WEIGH-IN: MASS MODELS OF SINGS GALAXIES USING CHEMO-SPECTROPHOTOMETRIC GALACTIC EVOLUTION MODELS

The baryonic mass-to-light ratio (Y{sub *}) used to perform the photometry-to-mass conversion has a tremendous influence on the measurement of the baryonic content and distribution as well as on the determination of the dark halo parameters. Since numerous clues hint at an inside-out formation process for galaxies, a radius-dependant Y{sub *} is needed to physically represent the radially varying stellar population. In this article, we use chemo-spectrophotometric galactic evolution (CSPE) models to determine Y{sub *} for a wide range of masses and sizes in the scenario of an inside-out formation process by gas accretion. We apply our method to a SINGS subsample of 10 spiral and dwarf galaxies with photometric coverage ranging from the UV to the mid-IR. The CSPE models prove to be a good tool for weighting the different photometric bands in order to obtain consistent stellar disk masses regardless of the spectral band used. On the other hand, we show that the color index versus Y{sub *} relation is an imperfect tool for assigning masses to young stellar populations because of the degeneracy affecting Y{sub *} in all bands at low color index. The disks resulting from our analysis are compatible with the maximum disk hypothesis provided that an adequate bulge/disk decomposition is performed and that the correction for the presence of a bar is not neglected since bars disturb the internal disk kinematics. Disk-mass models including Y{sub *} as a free parameter as well as models using our physically motivated, radially varying Y{sub *} are presented and discussed for each galaxy.

79 ASTRONOMY AND ASTROPHYSICS↗

The deflagration stage of Chandrasekhar mass models for type Ia supernovae. I. Early evolution

We present high-resolution, full-star simulations of the post-ignition phase of Type Ia supernovae using the compressible hydrodynamics code Castro. Initial conditions, including the turbulent velocity field and ignition site, are imported directly from a simulation of the last few hours of presupernova convection using a low Mach number code, Maestro. Adaptive mesh refinement allows the initial burning front to be modeled with an effective resolution of 36,864{sup 3} zones (136 m zone{sup –1}). The initial rise and expansion of the deflagration front are tracked until burning reaches the star's edge and the role of the background turbulence on the flame is investigated. The effect of artificially moving the ignition location closer to the star's center is explored. The degree to which turbulence affects the burning front decreases with increasing ignition radius since the buoyancy force is stronger at larger radii. Even central ignition—in the presence of a background convective flow field—is rapidly carried off-center as the flame is carried by the flow field. We compare our results to analytic models for burning thermals, and find that they reproduce the general trends of the bubble's size and mass, but underpredict the amount of buoyant acceleration due to simplifying assumptions of the bubble's properties. Overall, we find that the amount of mass that burns prior to flame break out is small, consistent with a gravitationally confined detonation' occurring at a later epoch, but additional burning will occur following breakout that may modify this conclusion.

79 ASTRONOMY AND ASTROPHYSICS↗

The {sup 13}C-pocket structure in AGB models: constraints from zirconium isotope abundances in single mainstream SiC grains

We present postprocess asymptotic giant branch (AGB) nucleosynthesis models with different {sup 13}C-pocket internal structures to better explain zirconium isotope measurements in mainstream presolar SiC grains by Nicolussi et al. and Barzyk et al. We show that higher-than-solar {sup 92}Zr/{sup 94}Zr ratios can be predicted by adopting a {sup 13}C-pocket with a flat {sup 13}C profile, instead of the previous decreasing-with-depth {sup 13}C profile. The improved agreement between grain data for zirconium isotopes and AGB models provides additional support for a recent proposal of a flat {sup 13}C profile based on barium isotopes in mainstream SiC grains by Liu et al.

79 ASTRONOMY AND ASTROPHYSICS↗

Broadband distortion modeling in Lyman-α forest BAO fitting

Recently, the Lyman-α absorption observed in the spectra of high-redshift quasars has been used as a tracer of large-scale structure by means of the three-dimensional Lyman-α forest auto-correlation function at redshift z≃ 2.3, but the need to fit the quasar continuum in every absorption spectrum introduces a broadband distortion that is difficult to correct and causes a systematic error for measuring any broadband properties. Here, we describe a k-space model for this broadband distortion based on a multiplicative correction to the power spectrum of the transmitted flux fraction that suppresses power on scales corresponding to the typical length of a Lyman-α forest spectrum. In implementing the distortion model in fits for the baryon acoustic oscillation (BAO) peak position in the Lyman-α forest auto-correlation, we find that the fitting method recovers the input values of the linear bias parameter b F and the redshift-space distortion parameter β F for mock data sets with a systematic error of less than 0.5%. Applied to the auto-correlation measured for BOSS Data Release 11, our method improves on the previous treatment of broadband distortions in BAO fitting by providing a better fit to the data using fewer parameters and reducing the statistical errors on βF and the combination b F (1+β F ) by more than a factor of seven. The measured values at redshift z=2.3 are βF=1.39 +0.11 +0.24 +0.38 -0.10 -0.19 -0.28 and bF(1+βF)=-0.374 +0.007 +0.013 +0.020 -0.007 -0.014 -0.022 (1σ, 2σ and 3σ statistical errors). Our fitting software and the input files needed to reproduce our main results are publicly available.

79 ASTRONOMY AND ASTROPHYSICS↗

Exploring the parameter space of warm-inflation models

Warm inflation includes inflaton interactions with other fields throughout the inflationary epoch instead of confining such interactions to a distinct reheating era. Previous investigations have shown that, when certain constraints on the dynamics of these interactions and the resultant radiation bath are satisfied, a low-momentum-dominated dissipation coefficient ∝T{sup 3}/m{sub χ}{sup 2} can sustain an era of inflation compatible with CMB observations. In this work, we extend these analyses by including the pole-dominated dissipation term ∝√(m{sub χ}T)exp (−m{sub χ}/T). We find that, with this enhanced dissipation, certain models, notably the quadratic hilltop potential, perform significantly better. Specifically, we can achieve 50 e-folds of inflation and a spectral index compatible with Planck data while requiring fewer mediator field (O(10{sup 4}) for the quadratic hilltop potential) and smaller coupling constants, opening up interesting model-building possibilities. We also highlight the significance of the specific parametric dependence of the dissipative coefficient which could prove useful in even greater reduction in field content.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Instrumental Response Model and Detrending for the Dark Energy Camera

We describe the model for mapping from sky brightness to the digital output of the Dark Energy Camera (DECam) and the algorithms adopted by the Dark Energy Survey (DES) for inverting this model to obtain photometric measures of celestial objects from the raw camera output. This calibration aims for fluxes that are uniform across the camera field of view and across the full angular and temporal span of the DES observations, approaching the accuracy limits set by shot noise for the full dynamic range of DES observations. The DES pipeline incorporates several substantive advances over standard detrending techniques, including principal-components-based sky and fringe subtraction; correction of the "brighter-fatter" nonlinearity; use of internal consistency in on-sky observations to disentangle the influences of quantum efficiency, pixel-size variations, and scattered light in the dome flats; and pixel-by-pixel characterization of instrument spectral response, through combination of internal-consistency constraints with auxiliary calibration data. This article provides conceptual derivations of the detrending/calibration steps, and the procedures for obtaining the necessary calibration data. Other publications will describe the implementation of these concepts for the DES operational pipeline, the detailed methods, and the validation that the techniques can bring DECam photometry and astrometry within $\approx 2$ mmag and $\approx 3$ mas, respectively, of fundamental atmospheric and statistical limits. In conclusion, the DES techniques should be broadly applicable to wide-field imagers.

79 ASTRONOMY AND ASTROPHYSICS↗

Modelling Z→TT processes in ATLAS with T-embedded Z →μμ data

We describe the concept, technical realisation and validation of a largely data-driven method to model events with Z→ττ decays. In Z→μμ events selected from proton-proton collision data recorded at √s=8 TeV with the ATLAS experiment at the LHC in 2012, the Z decay muons are replaced by τ leptons from simulated Z →ττ decays at the level of reconstructed tracks and calorimeter cells. The τ lepton kinematics are derived from the kinematics of the original muons. Thus, only the well-understood decays of the Z boson and τ leptons as well as the detector response to the τ decay products are obtained from simulation. All other aspects of the event, such as the Z boson and jet kinematics as well as effects from multiple interactions, are given by the actual data. This so-called τ-embedding method is particularly relevant for Higgs boson searches and analyses in ττ final states, where Z→ττ decays constitute a large irreducible background that cannot be obtained directly from data control samples. In this paper, we discuss the relevant concepts based on the implementation used in the ATLAS Standard Model H→ττ analysis of the full datataset recorded during 2011 and 2012.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

A CORE-COLLAPSE SUPERNOVA MODEL FOR THE EXTREMELY LUMINOUS TYPE Ic SUPERNOVA 2007bi: AN ALTERNATIVE TO THE PAIR-INSTABILITY SUPERNOVA MODEL

We present a core-collapse supernova (SN) model for the extremely luminous Type Ic SN 2007bi. By performing numerical calculations of hydrodynamics, nucleosynthesis, and radiation transport, we find that SN 2007bi is consistent with the core-collapse SN explosion of a 43 M{sub sun} carbon and oxygen core obtained from the evolution of a progenitor star with a main-sequence mass of 100 M{sub sun} and metallicity of Z = Z{sub sun}/200, from which its hydrogen and helium envelopes are artificially stripped. The ejecta mass and the ejecta kinetic energy of the models are 40 M{sub sun} and 3.6 x 10{sup 52} erg. The ejected {sup 56}Ni mass is as large as 6.1 M{sub sun}, which results from the explosive nucleosynthesis with large explosion energy. We also confirm that SN 2007bi is consistent with a pair-instability SN model as has recently been claimed. We show that the earlier light-curve data can discriminate between the models for such luminous SNe.

79 ASTRONOMY AND ASTROPHYSICS↗

Integrating proteomic or transcriptomic data into metabolic models using linear bound flux balance analysis

Abstract Motivation Transcriptomics and proteomics data have been integrated into constraint-based models to influence flux predictions. However, it has been reported recently for Escherichia coli and Saccharomyces cerevisiae, that model predictions from parsimonious flux balance analysis (pFBA), which does not use expression data, are as good or better than predictions from various algorithms that integrate transcriptomics or proteomics data into constraint-based models. Results In this paper, we describe a novel constraint-based method called Linear Bound Flux Balance Analysis (LBFBA), which uses expression data (either transcriptomic or proteomic) to predict metabolic fluxes. The method uses expression data to place soft constraints on individual fluxes, which can be violated. Parameters in the soft constraints are first estimated from a training expression and flux dataset before being used to predict fluxes from expression data in other conditions. We applied LBFBA to E.coli and S.cerevisiae datasets and found that LBFBA predictions were more accurate than pFBA predictions, with average normalized errors roughly half of those from pFBA. For the first time, we demonstrate a computational method that integrates expression data into constraint-based models and improves quantitative flux predictions over pFBA. Availability and implementation Code is available in the Supplementary data available at Bioinformatics online. Supplementary information Supplementary data are available at Bioinformatics online.

Tian, Mingyuan↗

Direct in situ measurement of coupled magnetostructural evolution in a ferromagnetic shape memory alloy and its theoretical modeling

Ferromagnetic shape memory alloys (FSMAs) have shown great potential as active components in next generation smart devices due to their exceptionally large magnetic-field-induced strains and fast response times. During application of magnetic fields in FSMAs, as is common in several magnetoelastic smart materials, there occurs simultaneous rotation of magnetic moments and reorientation of twin variants, resolving which, although critical for design of new materials and devices, has been difficult to achieve quantitatively with current characterization methods. At the same time, theoretical modeling of these phenomena also faced limitations due to uncertainties in values of physical properties such as magnetocrystalline anisotropy energy (MCA), especially for off-stoichiometric FSMA compositions. Here, in situ polarized neutron diffraction is used to measure directly the extents of both magnetic moments rotation and crystallographic twin-reorientation in an FSMA single crystal during the application of magnetic fields. Additionally, high-resolution neutron scattering measurements and first-principles calculations based on fully relativistic density functional theory are used to determine accurately the MCA for the compositionally disordered alloy of Ni 2 Mn 1.14 Ga 0.86 . The results from these state-of-the-art experiments and calculations are self-consistently described within a phenomenological framework, which provides quantitative insights into the energetics of magnetostructural coupling in FSMAs. Furthermore, based on the current model, the energy for magnetoelastic twin boundaries propagation for the studied alloy is estimated to be ~150 kJ/m 3 .

36 MATERIALS SCIENCE↗

Characterizing the three-orbital Hubbard model with determinant quantum Monte Carlo

Here, we characterize the three-orbital Hubbard model using state-of-the-art determinant quantum Monte Carlo (DQMC) simulations with parameters relevant to the cuprate high-temperature superconductors. The simulations find that doped holes preferentially reside on oxygen orbitals and that the (π,π) antiferromagnetic ordering vector dominates in the vicinity of the undoped system, as known from experiments. The orbitally-resolved spectral functions agree well with photoemission spectroscopy studies and enable identification of orbital content in the bands. A comparison of DQMC results with exact diagonalization and cluster perturbation theory studies elucidates how these different numerical techniques complement one another to produce a more complete understanding of the model and the cuprates. Interestingly, our DQMC simulations predict a charge-transfer gap that is significantly smaller than the direct (optical) gap measured in experiment. Most likely, it corresponds to the indirect gap that has recently been suggested to be on the order of 0.8 eV, and demonstrates the subtlety in identifying charge gaps.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Pb-Pb collisions at {radical}(s{sub NN})=2.76 TeV in a multiphase transport model

The multiplicity and elliptic flow of charged particles produced in Pb-Pb collisions at center of mass energy {radical}(s{sub NN})=2.76 TeV from the Large Hadron Collider are studied in a multiphase transport (AMPT) model. With the standard parameters in the HIJING model, which is used as initial conditions for subsequent partonic and hadronic scatterings in the AMPT model, the resulting multiplicity of final charged particles at mid-pseudorapidity is consistent with the experimental data measured by the ALICE Collaboration. This value is, however, increased by about 25% if the final-state partonic and hadronic scatterings are turned off. Because of final-state scatterings, particularly those among partons, the final elliptic flow of charged hadrons is also consistent with the ALICE data if a smaller but more isotropic parton scattering cross section than previously used in the AMPT model for describing the charged hadron elliptic flow in heavy ion collisions at the Relativistic Heavy Ion Collider is used. The resulting transverse momentum spectra of charged particles as well as the centrality dependence of their multiplicity density and the elliptic flow are also in reasonable agreement with the ALICE data. Furthermore, the multiplicities, transverse momentum spectra, and elliptic flows of identified hadrons such as protons, kaons, and pions are predicted.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Longitudinal scaling of observables in heavy-ion collision models

Longitudinal scaling of pseudorapidity distribution of charged particles (dN{sub ch}/d{eta}) is observed when presented as a function of pseudorapidity ({eta}) shifted by the beam rapidity ({eta}-y{sub beam}) for a wide range of collision systems (e{sup +}+e{sup -}, p+p, d+A, and A+A) and beam energies. Such a scaling is also observed for the elliptic flow (v{sub 2}) of charged hadrons in A+A collisions. This is a striking observation, as v{sub 2} is expected to be sensitive to the initial conditions, the expansion dynamics, and the degrees of freedom of the system, all of which potentially varies with collision system and colliding energies. We present a study of the longitudinal scalings of dN{sub ch}/d{eta}, average transverse momentum (<p{sub T}>), and v{sub 2} using transport models UrQMD and AMPT for Au + Au collisions at center of mass energies ({radical}(s{sub NN})) of 19.6, 62.4, and 200 GeV and Pb + Pb collisions at 2760 GeV. Only the AMPT models which includes partonic effects and quark coalescence as a mechanism of hadronization shows longitudinal scaling for dN{sub ch}/d{eta}, <p{sub T}>, and v{sub 2}. Whereas the UrQMD and AMPT default versions show longitudinal scaling only for dN{sub ch}/d{eta} and <p{sub T}>. We also discuss the possibility of longitudinal scaling of v{sub 2} within two extreme scenarios of models with hydrodynamic and collisionless limits. We find the longitudinal scaling of bulk observables to be an important test for the underlying physics mechanism in models of particle production.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Cross-correlation of Dark Energy Survey Year 3 lensing data with ACT and P l a n c k thermal Sunyaev-Zel’dovich effect observations. II. Modeling and constraints on halo pressure profiles

Hot, ionized gas leaves an imprint on the cosmic microwave background via the thermal Sunyaev-Zel’dovich (tSZ) effect. The cross-correlation of gravitational lensing (which traces the projected mass) with the tSZ effect (which traces the projected gas pressure) is a powerful probe of the thermal state of ionized baryons throughout the Universe and is sensitive to effects such as baryonic feedback. In a companion paper (Gatti et al. Phys. Rev. D 105, 123525 (2022)), we present tomographic measurements and validation tests of the cross-correlation between Galaxy shear measurements from the first three years of observations of the Dark Energy Survey and tSZ measurements from a combination of Atacama Cosmology Telescope and Planck observations. In this work, we use the same measurements to constrain models for the pressure profiles of halos across a wide range of halo mass and redshift. We find evidence for reduced pressure in low-mass halos, consistent with predictions for the effects of feedback from active Galactic nuclei. We infer the hydrostatic mass bias (B ≡ M 500c /M SZ from our measurements, finding B = 1.8 ± 0.1 when adopting the Planck-preferred cosmological parameters. We additionally find that our measurements are consistent with a nonzero redshift evolution of B, with the correct sign and sufficient magnitude to explain the mass bias necessary to reconcile cluster count measurements with the Planck-preferred cosmology. Our analysis introduces a model for the impact of intrinsic alignments (IAs) of galaxy shapes on the shear-tSZ correlation. We show that IA can have a significant impact on these correlations at current noise levels.

79 ASTRONOMY AND ASTROPHYSICS↗

Joint analysis of Dark Energy Survey Year 3 data and CMB lensing from SPT and Planck . I. Construction of CMB lensing maps and modeling choices

Joint analyses of cross-correlations between measurements of galaxy positions, galaxy lensing, and lensing of the cosmic microwave background (CMB) offer powerful constraints on the large-scale structure of the Universe. In a forthcoming analysis, we will present cosmological constraints from the analysis of such cross-correlations measured using Year 3 data from the Dark Energy Survey (DES), and CMB data from the South Pole Telescope (SPT) and Planck. Here we present two key ingredients of this analysis: (1) an improved CMB lensing map in the SPT-SZ survey footprint and (2) the analysis methodology that will be used to extract cosmological information from the cross-correlation measurements. Relative to previous lensing maps made from the same CMB observations, we have implemented techniques to remove contamination from the thermal Sunyaev Zel’dovich effect, enabling the extraction of cosmological information from smaller angular scales of the cross-correlation measurements than in previous analyses with DES Year 1 data. We describe our model for the cross-correlations between these maps and DES data, and validate our modeling choices to demonstrate the robustness of our analysis. We then forecast the expected cosmological constraints from the galaxy survey-CMB lensing auto and cross-correlations. We find that the galaxy-CMB lensing and galaxy shear-CMB lensing correlations will on their own provide a constraint on S 8 =σ 8 $\sqrt{Ωm/0.3}$ at the few percent level, providing a powerful consistency check for the DES-only constraints. Finally, we explore scenarios where external priors on shear calibration are removed, finding that the joint analysis of CMB lensing cross-correlations can provide constraints on the shear calibration amplitude at the 5% to 10% level.

79 ASTRONOMY AND ASTROPHYSICS↗

Exclusive J/Psi electroproduction in a dual model

Exclusive J/Psi electroproduction is studied in the framework of the analytic S-matrix theory. The differential and integrated elastic cross sections are calculated using the Modified Dual Amplitude with Mandelstam Analyticity (M-DAMA) model. The model is applied to the description of the available experimantal data and proves to be valid in a wide region of the kinematical variables s, t and Q^2. Our amplitude can be used also as a universal background parametrization for the extraction of tiny resonance signals.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗