Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGNETRONS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,711 records · Page 95

B{sub 4}C thin films for neutron detection

Due to the very limited availability of {sup 3}He, new kinds of neutron detectors, not based on {sup 3}He, are urgently needed. Here, we present a method to produce thin films of {sup 10}B{sub 4}C, with maximized detection efficiency, intended to be part of a new generation of large area neutron detectors. B{sub 4}C thin films have been deposited onto Al-blade and Si wafer substrates by dc magnetron sputtering from {sup nat}B{sub 4}C and {sup 10}B{sub 4}C targets in an Ar discharge, using an industrial deposition system. The films were characterized with scanning electron microscopy, elastic recoil detection analysis, x-ray reflectivity, and neutron radiography. We show that the film-substrate adhesion and film purity are improved by increased substrate temperature and deposition rate. A deposition rate of 3.8 A/s and substrate temperature of 400 deg. C result in films with a density close to bulk values and good adhesion to film thickness above 3 {mu}m. Boron-10 contents of almost 80 at. % are obtained in 6.3 m{sup 2} of 1 {mu}m thick {sup 10}B{sub 4}C thin films coated on Al-blades. Initial neutron absorption measurements agree with Monte Carlo simulations and show that the layer thickness, number of layers, neutron wavelength, and amount of impurities are determining factors. The study also shows the importance of having uniform layer thicknesses over large areas, which for a full-scale detector could be in total {approx}1000 m{sup 2} of two-side coated Al-blades with {approx}1 {mu}m thick {sup 10}B{sub 4}C films.

36 MATERIALS SCIENCE↗

Structural and electrical studies of ultrathin layers with Si{sub 0.7}Ge{sub 0.3} nanocrystals confined in a SiGe/SiO{sub 2} superlattice

In this work, SiGe/SiO{sub 2} multi-layer (ML) films with layer thickness in the range of a few nanometers were successfully fabricated by conventional RF-magnetron sputtering at 350 deg. C. The influence of the annealing treatment on SiGe nanocrystals (NCs) formation and crystalline properties were investigated by Raman spectroscopy and grazing incidence x-ray diffraction. At the annealing temperature of 800 deg. C, where well defined SiGe NCs were observed, a thorough structural investigation of the whole ML structure has been undertaken by Rutherford backscattering spectroscopy, grazing incidence small angle x-ray scattering, high resolution transmission electron microscopy, and annular dark field scanning transmission electron microscopy. Our results show that the onset of local modifications to the ML composition takes place at this temperature for annealing times of the order of a few tens of minutes with the formation of defective regions in the upper portion of the ML structure. Only the very first layers over the Si substrate appear immune to this problem. This finding has been exploited for the fabrication of a defect free metal-oxide-semiconductor structure with a well-defined single layer of SiGe NCs. A memory effect attributed to the presence of the SiGe NCs has been demonstrated by high frequency capacitance-voltage measurements.

36 MATERIALS SCIENCE↗

Enhancement of optical absorption by modulation of the oxygen flow of TiO{sub 2} films deposited by reactive sputtering

Oxygen-deficient TiO{sub 2} films with enhanced visible and near-infrared optical absorption have been deposited by reactive sputtering using a planar diode radio frequency magnetron configuration. It is observed that the increase in the absorption coefficient is more effective when the O{sub 2} gas supply is periodically interrupted rather than by a decrease of the partial O{sub 2} gas pressure in the deposition plasma. The optical absorption coefficient at 1.5 eV increases from about 1 Multiplication-Sign 10{sup 2} cm{sup -1} to more than 4 Multiplication-Sign 10{sup 3} cm{sup -1} as a result of the gas flow discontinuity. A red-shift of {approx}0.24 eV in the optical absorption edge is also observed. High resolution transmission electron microscopy with composition analysis shows that the films present a dense columnar morphology, with estimated mean column width of 40 nm. Moreover, the interruptions of the O{sub 2} gas flow do not produce detectable variations in the film composition along its growing direction. X-ray diffraction and micro-Raman experiments indicate the presence of the TiO{sub 2} anatase, rutile, and brookite phases. The anatase phase is dominant, with a slight increment of the rutile and brookite phases in films deposited under discontinued O{sub 2} gas flow. The increase of optical absorption in the visible and near-infrared regions has been attributed to a high density of defects in the TiO{sub 2} films, which is consistent with density functional theory calculations that place oxygen-related vacancy states in the upper third of the optical bandgap. The electronic structure calculation results, along with the adopted deposition method and experimental data, have been used to propose a mechanism to explain the formation of the observed oxygen-related defects in TiO{sub 2} thin films. The observed increase in sub-bandgap absorption and the modeling of the corresponding changes in the electronic structure are potentially useful concerning the optimization of efficiency of the photocatalytic activity and the magnetic doping of TiO{sub 2} films.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Nanostructured multilayered thin film barriers for Mg{sub 2}Si thermoelectric materials

The Mg{sub 2}Si-based alloys are promising candidates for thermoelectric energy conversion in the middle-high temperature range in order to replace lead compounds. The main advantages of silicide-based thermoelectrics are the nontoxicity and the abundance of their constituent elements in the earth crust. The drawback of such kind of materials is their oxygen sensitivity at high temperature that entails their use under vacuum or inert atmosphere. In order to limit the corrosion phenomena, nanostructured multilayered molybdenum silicide-based materials were deposited via RF magnetron sputtering onto stainless steel, alumina and silicon (100) to set up the deposition process and then onto Mg{sub 2}Si pellets. XRD, EDS, FE-SEM and electrical measurements at high temperature were carried out in order to obtain, respectively, the structural, compositional, morphological and electrical characterization of the deposited coatings. At the end, the mechanical behavior of the system thin film/Mg{sub 2}Si-substrate as a function of temperature and the barrier properties for oxygen protection after thermal treatment in air at high temperature were qualitatively evaluated by FE-SEM.

36 MATERIALS SCIENCE↗

Nanocrystallization of amorphous M-Si thin film composites (M=Cr, Mn) and their thermoelectric properties

We report on electrical resistivity and thermoelectric power of Cr-Si and Mn-Si composite films at temperatures from 300 K to 1000 K. The films were deposited on unheated Si/SiO{sub 2} substrates by magnetron sputtering from composite targets. The as-deposited films have amorphous structure. We use annealing with in-situ transport properties measurements to transform the films into nanocrystalline state with continuous monitoring their state. Nanocrystallization is considered as a promising way to improve thermoelectric efficiency, primarily due to reduction of lattice thermal conductivity {kappa}. Among variety of methods for fabrication of NC materials, crystallization from amorphous state has features which are crucially important with respect to their electronic transport properties: since the crystallites and their interfaces are formed in this method via solid state reaction, the NC samples are dense and the interfaces are clean. This removes additional factors affecting properties of a nanocrystalline composite, such as contamination of nanocrystal interfaces by elements from environment or nanocrystal lattice distortion during nanocrystallization. Depending on the initial film composition, the films are transformed during annealing into single phase or multi-phase nanocrystalline composites with average grain size of 10 nm to 20 nm. We study the crystallization kinetics, stability of amorphous and nanocrystalline state and relation between electronic transport properties and structural state of the composites.

36 MATERIALS SCIENCE↗

A study of the applicability of ZnO thin-films as anti-reflection coating on Cu{sub 2}ZnSnS{sub 4} thin-films solar cell

Transparent ZnO thin-films are prepared using the RF magnetron sputtering and spray pyrolysis techniques on the glass substrates. Reflectance spectra and thin films heights are measured using spectrophotometer and stylus surface profiler, respectively. Measured optical data is used for investigating the effect of the ZnO prepared by above two processes on the performance of Cu{sub 2}ZnSnS{sub 4} (CZTS) thin films solar cell (TFSC). One dimensional simulation approach is considered using the simulation program, SCAPS. External quantum efficiency and J-V characteristics of CZTS TFSC is simulated on the basis of optical reflectance data of ZnO films with and without ZnO thin-films as antireflection coating (ARC). Study shows that ARC coated CZTS TFSC provides a better fill factor (FF) as compared to other ARC material such as MgF{sub 2}. Sprayed ZnO thin-films as ARC show comparable performance with the sputtered samples.

36 MATERIALS SCIENCE↗

Nanomechanical and nanotribological properties of Nb substituted TiN thin films

Nanomechanical and nanotribological properties of Ti{sub 1-x}Nb{sub x}N (0{<=}x{<=}1) thin films were investigated as a function x. The films were deposited onto polycrystalline nuclear grade 316LN stainless steel (SS) substrate by radio frequency magnetron sputtering in 100% N{sub 2} plasma. The hardness and Young's modulus increased while the friction coefficient and wear volume decreased with increasing Nb substitution. The highest hardness achieved was 31GPa for x=0.77. At the same Nb concentration, the friction coefficient was 0.15 and the elastic recovery was 60%.

36 MATERIALS SCIENCE↗

Influence of annealing temperature on electronic and dielectric properties of ZrO{sub 2} thin films on Si

Zirconium oxide (ZrO{sub 2}) films were deposited on (100) silicon substrates by DC reactive magnetron sputtering of zirconium target at an oxygen partial pressure of 6 Multiplication-Sign 10{sup -2} Pa. The as-deposited films were annealed in air for 1 hour at different temperatures in the range 773 - 1173 K. The influence of annealing temperature on the structural properties of ZrO{sub 2} films and the electrical properties like Capacitance-Voltage and Current-Voltage of the capacitors of the type Al/ZrO{sub 2}/p-Si were studied. The capacitance and dielectric constant of the capacitors were found to increase with increase in annealing temperature from 773 to 973 K, however, with further increase in annealing temperature to 1173 K they were found to decrease. In addition, the leakage current density was decreased from 1 Multiplication-Sign 10{sup -6} to 4 Multiplication-Sign 10{sup -7} A/cm{sup 2} at 1V gate bias voltage and the electrical conduction mechanism was dominated by Schottky emission for all the films in lower electric fields.

36 MATERIALS SCIENCE↗

Effect of 79 MeV Br ion irradiation on the surface features of rutile TiO{sub 2} thin film

In this study, rutile titanium dioxide thin films deposited on Si (100) substrates by DC magnetron sputtering are irradiated by 79 MeV Br ions. Though each Br ion is expected to amorphize the medium along its path, the film remains crystalline even at the highest fluence of irradiation. The evolution of surface of the films with Br ion fluence is studied using atomicforce microscopy. The films were found to smoothen under dense electronic excitation of Br ions. The irregular shape grain of the pristine films convert to circular shape at a fluence of 1 Multiplication-Sign 10{sup 13} Br ions cm{sup -2}. Power spectral density (PSD) analysis of the AFM images indicates that irradiation induced smoothing of the surfaces is governed by the surface diffusion process.

36 MATERIALS SCIENCE↗

Irradiation induced modification in transport properties of LaNiO{sub 3} thin films: An x-ray absorption study

Highly c-axis oriented LaNiO{sub 3} thin films are grown on LaAlO{sub 3} (001) single crystal substrates using rf-magnetron sputtering. Swift heavy ion irradiation induced variations in structural and electrical transport properties of deposited films are studied. Pristine film shows unusual insulating character while the irradiated film exhibits metallic behaviour. X-ray diffraction study indicates that irradiation improves the crystalline character of films while retaining the oriented single phase growth. Electronic structure measurements performed using x-ray absorption spectroscopy at O K, La M{sub 5,4}, and Ni L{sub 3,2}-edges reveal that Ni-O hybridization-controlled localization of charge carriers is responsible for the observed transport behaviour.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

d{sup 0} ferromagnetism in undoped n and p-type In{sub 2}O{sub 3} films

Undoped indium oxide films with room temperature d{sup 0} ferromagnetism were prepared by radiofrequency magnetron sputtering with different O{sub 2}/Ar flux ratio. The optical and magnetic properties changed non-monotonously as the oxygen flux increases. A conversion of conductivity from n-type to p-type was observed as the flux ratio reached 15:15. The concordant results in structural, electrical, optical, and magnetic properties suggest that single ionized oxygen and indium vacancies play crucial roles in mediating the ferromagnetism in n and p-type In{sub 2}O{sub 3} films, respectively.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Dielectric relaxation study of amorphous TiTaO thin films in a large operating temperature range

Two relaxation processes have been identified in amorphous TiTaO thin films deposited by reactive magnetron sputtering. The parallel angle resolved x-ray photoelectron spectroscopy and field emission scanning electron microscopy analyses have shown that this material is composed of an agglomerates mixture of TiO{sub 2}, Ta{sub 2}O{sub 5}, and Ti-Ta bonds. The first relaxation process appears at low temperature with activation energy of about 0.26 eV and is related to the first ionisation of oxygen vacancies and/or the reduction of Ti{sup 4+} to Ti{sup 3+}. The second relaxation process occurs at high temperature with activation energy of 0.95 eV. This last peak is associated to the diffusion of the doubly ionized oxygen vacancies V{sub O}e. The dispersion phenomena observed at high temperature can be attributed to the development of complex defect such as (V{sub O}e - 2Ti{sup 3+}).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of silver incorporation in phase formation and band gap tuning of tungsten oxide thin films

Silver incorporated tungsten oxide thin films are prepared by RF magnetron sputtering technique. The effect of silver incorporation in micro structure evolution, phase enhancement, band gap tuning and other optical properties are investigated using techniques such as x-ray diffraction, micro-Raman spectroscopy, atomic force microscopy, scanning electron microscopy, energy dispersive x-ray spectroscopy, and UV-Visible spectroscopy. Effect of silver addition in phase formation and band gap tuning of tungsten oxide thin films are investigated. It is found that the texturing and phase formation improves with enhancement in silver content. It is also found that as the silver incorporation enhances the thickness of the films increases at the same time the strain in the film decreases. Even without annealing the desired phase can be achieved by doping with silver. A broad band centered at the wavelength 437 nm is observed in the absorption spectra of tungsten oxide films of higher silver incorporation and this can be attributed to surface plasmon resonance of silver atoms present in the tungsten oxide matrix. The transmittance of the films is decreased with increase in silver content which can be due to increase in film thickness, enhancement of scattering, and absorption of light caused by the increase of grain size, surface roughness and porosity of films and enhanced absorption due to surface plasmon resonance of silver. It is found that silver can act as the seed for the growth of tungsten oxide grains and found that the grain size increases with silver content which in turn decreases the band gap of tungsten oxide from 3.14 eV to 2.70 eV.

36 MATERIALS SCIENCE↗

Electrical properties and thermal stability of Pd-doped copper nitride films

Pd-doped copper nitride films with Pd concentrations up to 5.6 at. % were successfully synthesized by reactive magnetron sputtering of metal targets. Higher concentration of Pd (>5.6 at. %) would deteriorate the quality of the deposits. XPS and XRD data strongly suggest that Pd atoms occupy the centers of the Cu{sub 3}N unit cells rather than simply substituting for the Cu atoms. A reduction in the electrical resistivity by three orders of magnitude was observed when the Pd concentration increases from zero to 5.6 at. %. All the deposits with the Pd concentration up to 5.6 at. % exhibit n-typed conductivity behavior. The corresponding carrier concentrations increase by four orders of magnitude from 10{sup 17} to 10{sup 21} cm{sup -3}. Compared with the undoped copper nitride films, a weakly Pd-doped Cu{sub 3}N films possess fine thermal stability in vacuum. And the decomposition product after annealing at 450 Degree-Sign C exhibits a good metallic behavior, indicating that it qualifies the fabrication of conduct wires or metallic structures for the promising applications.

36 MATERIALS SCIENCE↗

The change of electrical transport characterizations in Ga doped ZnO films with various thicknesses

GZO films with different thicknesses were prepared at room temperature by magnetron sputtering and the structure is characterized using two-dimensional X-ray diffraction along with transmission electron microscope and X-ray photoelectron spectroscopy. The films show a textured orientation along the c-axis and an average transmittance of over 90%. The films of 100 and 200 nm are characterized by a semiconductor behavior in the temperature range of 80-320 K, while the conduction behavior turns into a metallic transport at 160 K as the film thickness increases to 400 nm. Temperature dependence of the conductivity manifests a weak localization effect dominated in the semiconductor behavior. The transition between semiconductor and metallic behavior with increasing the thickness is shown to be associated to crystallinity of the films which is improved with decreasing defects and lattice distortion. It is suggested that the improvement of crystallinity should be favored by reduction of the weak localization effect and in turn enhance the semiconductor-to-metal transition.

36 MATERIALS SCIENCE↗

Crystal structure and magnetic properties of Zn{sub 0.9}Cu{sub 0.1}O{sub y} rf-sputtered thin films

Zn{sub 0.9}Cu{sub 0.01}O thin films were deposited on quartz substrates by rf-magnetron sputtering using ceramic target in pure argon gas environment. The X-ray diffraction show the polycrystalline wurtzite structure of the films. The average grain size increases from 40-100nm as thickness of the film increases. The room temperature magnetization studies show the films to be ferromagnetic. The saturation magnetization decreases with increase in film thickness.

36 MATERIALS SCIENCE↗

Role of indium in highly crystalline ZnO thin films

Zinc oxide and indium doped zinc oxide (ZnO:In) transparent conducting thin films were deposited on glass substrates by pulsed DC magnetron sputtering using separate Zn and In targets. The independent control of the In content in ZnO has helped us to explore the role of indium in influencing the oriented (002) growth, crystallinity, conductivity and mobility of the doped films. The lowest resistivity of ZnO:In thin film is 2.73 Multiplication-Sign 10{sup -3} ohm-cm. At the optimal condition of high (002) orientation, ZnO:In films with electrical resistivity of 7.63 Multiplication-Sign 10{sup -3} ohm.cm and mobility of 126.4 cm{sup 2}/V.s are achieved.

36 MATERIALS SCIENCE↗

Temperature dependence of magnetotransport behavior and its correlation with inter-particle interaction in Cu{sub 100-x}Co{sub x} granular films

Granular Cu{sub 100-x}Co{sub x} (x=15.1-30.9) films were deposited by magnetron co-sputtering and their magnetotransport properties were investigated as a function of temperature. We observed that with increasing cobalt content the room temperature magnetoresistance (MR) shows a maximum at x=20.9. With decreasing temperature, it is observed that the cobalt concentration at which the maximum MR occurs shifts progressively towards lower Co concentration. This behavior has been discussed in terms of the inter-particle magnetic interactions.

36 MATERIALS SCIENCE↗