Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Logging”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,711 records · Page 95
All sourcesNASA NTRSDOE OSTI
NASA NTRS1997

A Survey of Distant Clusters of Galaxies Selected by X-Rays

I will discuss the results of a new survey of X-ray selected, distant clusters of galaxies that has been undertaken by our group at.CfA (Vikhlinin, McNamara, Forman, Jones). We have analyzed the inner 17.5 arcminute region of roughly 650 ROSAT PSPC images of high latitude fields to compile a complete, flux-limited sample of clusters with a mean flux limit roughly 20 times more sensitive than the Einstein Medium Sensitivity Survey. The goal of our survey, which presently contains 233 extended X-ray sources, is to study cluster evolution over cosmological timescales. We have obtained optical images for nearly all of the faintest sources using the 1.2 m telescope of the Fred L. Whipple Observatory, and when including POSS images of the brighter sources, we have nearly completed the identification of all of the extended sources. Roughly 80% of the sources were identified as clusters of galaxies. We have measured redshifts for 42 clusters using the MMT, and including additional measurements from the literature, roughly 70 clusters in our catalog have spectroscopic redshifts. Using CCD photometry and spectroscopic redshifts, we have determined a magnitude-redshift relation which will allow redshifts of the remaining clusters in our sample to be determined photometrically to within a delta z over z of roughly ten percent. I will discuss the Log(N)-Log(S) relation for our sample and compare it to other determinations. In addition, I will discuss the evolution of core radii of clusters.

McNamara, Brian↗
NASA NTRS1999

Multitaper Spectral Analysis and Wavelet Denoising Applied to Helioseismic Data

Estimates of solar normal mode frequencies from helioseismic observations can be improved by using Multitaper Spectral Analysis (MTSA) to estimate spectra from the time series, then using wavelet denoising of the log spectra. MTSA leads to a power spectrum estimate with reduced variance and better leakage properties than the conventional periodogram. Under the assumption of stationarity and mild regularity conditions, the log multitaper spectrum has a statistical distribution that is approximately Gaussian, so wavelet denoising is asymptotically an optimal method to reduce the noise in the estimated spectra. We find that a single m-upsilon spectrum benefits greatly from MTSA followed by wavelet denoising, and that wavelet denoising by itself can be used to improve m-averaged spectra. We compare estimates using two different 5-taper estimates (Stepian and sine tapers) and the periodogram estimate, for GONG time series at selected angular degrees l. We compare those three spectra with and without wavelet-denoising, both visually, and in terms of the mode parameters estimated from the pre-processed spectra using the GONG peak-fitting algorithm. The two multitaper estimates give equivalent results. The number of modes fitted well by the GONG algorithm is 20% to 60% larger (depending on l and the temporal frequency) when applied to the multitaper estimates than when applied to the periodogram. The estimated mode parameters (frequency, amplitude and width) are comparable for the three power spectrum estimates, except for modes with very small mode widths (a few frequency bins), where the multitaper spectra broadened the modest compared with the periodogram. We tested the influence of the number of tapers used and found that narrow modes at low n values are broadened to the extent that they can no longer be fit if the number of tapers is too large. For helioseismic time series of this length and temporal resolution, the optimal number of tapers is less than 10.

Komm, R. W.↗
NASA NTRS1999

Map Algorithms for Decoding Linear Block codes Based on Sectionalized Trellis Diagrams

The MAP algorithm is a trellis-based maximum a posteriori probability decoding algorithm. It is the heart of the turbo (or iterative) decoding which achieves an error performance near the Shannon limit. Unfortunately, the implementation of this algorithm requires large computation and storage. Furthermore, its forward and backward recursions result in long decoding delay. For practical applications, this decoding algorithm must be simplified and its decoding complexity and delay must be reduced. In this paper, the MAP algorithm and its variations, such as Log-MAP and Max-Log-MAP algorithms, are first applied to sectionalized trellises for linear block codes and carried out as two-stage decodings. Using the structural properties of properly sectionalized trellises, the decoding complexity and delay of the MAP algorithms can be reduced. Computation-wise optimum sectionalizations of a trellis for MAP algorithms are investigated. Also presented in this paper are bi-directional and parallel MAP decodings.

Lin, Shu↗
NASA NTRS1999

Laser Optogalvanic Spectroscopy pf Neon and Argon in a Discharge Plasma and its Significance for Microgravity Combustion

A detailed study of combustion mechanisms in flames, employing laser-based diagnostics, has provided good knowledge and understanding of the physical phenomena, and led to better characterization of the dynamical and chemical combustion processes, both under low-gravity (in space) and normal gravity (in ground based facilities, e.g. drop towers). Laser induced fluorescence (LIF), laser-induced incandescence (LII) and LIF thermometry have been widely used to perform nonintrusive measurements and to better understand combustion phenomena. Laser optogalvanic (LOG) spectroscopy has well-established applications in ion mobility measurements, atomic and molecular spectroscopy, ionization rates, recombination rates, velocity measurements and as a combustion probe for trace element detection. Absorption spectra of atomic and molecular species in flames can be obtained via LOG spectroscopy by measuring the voltage and current changes induced by laser irradiation. There are different kinds of processes that contribute to a discharge current, namely: (1) electron impact ionization, (2) collisions among the excited atoms of the discharge species and (3) Penning ionization. In general, at higher discharge currents, the mechanism of electron impact ionization dominates over Penning ionization, whereby the latter is hardly noticeable. In a plasma, whenever the wavelength of a laser coincides with the absorption of an atomic or molecular species, the rate of ionization of the species momentarily increases or decreases due to laser-assisted acceleration of collisional ionization. Such a rate of change in the ionization is monitored as a variation in the transient current by inserting a high voltage electrode into the plasma. Optogalvanic spectroscopy in discharges has been useful for characterizing laser line-widths and for providing convenient calibration lines for tunable dye lasers in the ultraviolet, visible and infrared wavelength regions. Different kinds of quantitative information, such as the electron collisional ionization rate, can be extracted from the complex processes occurring within the discharge. In the optogalvanic effect (OGE), there is no problem of overlap from background emissions, and hence even weak signals can be detected with a high signal-to-noise ratio, which makes the optogalvanic effect sensitive enough to resolve vibrational changes in molecular bonds and differences in energy levels brought about by different electron spins. For calibration purposes, neon and argon gaseous discharges have been employed most extensively, because these gases are commonly used as buffer gases within hollow-cathode lamps and provide an acceptable density of calibration lines. In the present work, our main aim has been to understand the dominant physical processes responsible for the production of the OGE signal, based on the extensive time resolved optogalvanic waveforms recorded, and also to extract quantitative information on the rates of excited state collisional processes.

Misra, Prabhakar↗
NASA NTRS1999

A Source Survey in a High Galactic Latitude Field

The subject grant is for work on the study of X-ray sources detected in a 20 ks high Galactic latitude pointing with the ROSAT PSPC. The purpose of the study is to: compare the detected source population with the log N - log S relationship; and to identify sources which show variability or particularly anomalous X-ray behavior. As detailed below, several concrete identifications of sources detected in this observation have been made, and the overall flux distribution of the detected sources is typical of the overall population at high latitude. No highly variable sources, were identified. This summary serves as the final report for this study.

Slane, Patrick O.↗
NASA NTRS1998

Characterization of Ring Wave Spectra for Natural Rain: Measurements and Model for Remote Sensing Applications

Ring waves generated by natural rains from 1 to 100 mm/hr were measured in a small tank located in a field. Time series were obtained: (a) from a wire capacitance probe that measured surface elevation, (b) from an optical gauge that measured rain rates R, (c) from an anemometer that measured wind speeds and (d) from a 13.5 GHz scatterometer (w polarization, and 30 degree incidence angle). Ring wave frequency spectra are computed from the surface elevation data for each minute of rain. All the spectra have a similar shape, with a maximum near 5 Hz, and with a more rapid decay towards higher frequencies than towards lower frequencies. A log-Gaussian spectral model provides a useful representation of these data and analysis of the model coefficients shows that the peak frequency and bandwidth are approximately constant, but the magnitude increases as R increases, Additionally, the normalized radar cross section from the scatterometer varies approximately linearly with the spectral line corresponding to the Bragg-wavelength, so together the log-Gaussian ring wave model and the Bragg scattering theory should be useful for a broad range of applications. These findings can be used to help interpret remote sensing data during rain events and to guide model development for radar scattering from rain roughened seas.

Bliven, L.↗
NASA NTRS1999

Dependence of Z-R Relations on the Rain Type Classification Scheme

The TRMM Global Validation Program is giving us a unique opportunity to compare radar datasets from different sites since they are analyzed in a relatively uniform procedure. Monthly Ze-R relations for four different sites (i.e, Melbourne Florida, Houston Texas, Darwin Australia and Kwajalein Atoll) were derived. The relations were obtained using the Window Probability Matching Method (WPMM). This version of the PMM relies on matching unconditional probabilities of rain rates, R, and radar reflectivity, Ze, using rain gauge and radar data, respectively. This procedure was done separately for convective and stratiform rain type using the Steiner classification procedure. The radar and gauge data from all sites were quality controlled using the same algorithms, which include also an automatic procedure to filter unreliable rain gauge data upon comparison to radar data. An adjusted power law Z-R for each rain type was also derived by comparing the radar-gauge coincident pairs in order to adjust the total monthly rainfall to match the gauges. The obtained PMM based Ze-R relations are found to be curved lines in log-log space rather than any straight line power law. While the PMM based Ze-R curves were always distinctly different between the convective and stratiform rain, the power law based Z-R, in few cases, was found to be the same for both types. In general, a given reflectivity was matched to a much lower rain intensity in the convective rainfall as compared to that in stratiform rainfall. These findings are inherently contradictory to previous findings based on disdrometer data and suggest some precaution for using the latter Z-R relations on radar data when the partition of stratiform and convective rainfall amount is in concern. The inverse trends in the relations might be caused by effects such as partial beam fillings, the use of different classification schemes, as well as having a distinct difference in the Z-R relations between the initial convective and the trailing transition regions as suggested by recent findings.

Amitai, Eyal↗
NASA NTRS1999

Physical Parameters of Hot Horizontal-Branch Stars in NGC 6752: Deep Mixing and Radiative Levitation

Atmospheric parameters (T(sub eff), log g and log n(sub He)/n(sub H-dot)) are derived for 42 hot horizontal branch (HB) stars in the globular cluster NGC 6752. For 19 stars Mg II and Fe II lines are detected indicating an iron enrichment by a factor 50 on average with respect to the cluster abundance whereas the magnesium abundances are consistent with the cluster metallicity. This finding adds to the growing evidence that radiative levitation plays a significant role in determining the physical parameters of blue HB stars. Indeed, we find that iron enrichment can explain part, but not all, of the problem of anomalously low gravities along the blue HB. Thus the physical parameters of horizontal branch stars hotter than about 11,500 K in NGC 6752, as derived in this paper, are best explained by a combination of helium mixing and radiative levitation effects.

Moehler, S.↗
NASA NTRS1999

Radiative Smoothing in Clouds at Transparent and Absorbing Wavelengths

For absorbing and transparent wavelengths, we discuss the effect of horizontal solar radiative fluxes in clouds on the accuracy of a conventional plane-parallel radiative transfer calculations for a single pixel, known as the Independent Pixel Approximation (IPA). We address the question of correlations between horizontal fluxes, IPA accuracies and radiative smoothing. By smoothing we understand a radiative transfer process whereby radiation does not follow the small-scale fluctuations of cloud structure, producing much smoother radiation fields. The scale eta that characterizes this process is called "radiative smoothing scale." We relate radiative smoothing to the photon's horizontal displacement that characterizes a "spot" of reflected light associated with a point source. We generalize the "spot-size" estimate derived for conservative scattering using the diffusion theory to the case of non-conservative scattering. For reflected light, theoretical results are confirmed with numerical simulations. The radiative smoothing scale eta is a critical value where IPA effectively breaks down; for scales smaller than TI, real radiation field are much smoother than their IPA counterparts for the same cloud structure. In addition to the estimate of il for absorbing wavelengths, we show that: (1) with more absorption, the scale break determined by eta in a log-log plot of wavenumber spectra moves towards smaller scales and (2) the smaller eta the flatter the small-scale slope which means less radiative smoothing, thus more accuracy in the IPA reflection.

Marshak, A.↗
NASA NTRS1999

Disentangling the Hard X-ray Background ROSAT HRI

The goal of our investigation was to improve our understanding of the properties of the discrete X-ray sources that produce the X-ray background (XRB). Many surveys have shown that the XRB at energies of 0.5-3.0 keV is dominated by emission from extragalactic point sources and that a significant fraction of the XRB at higher energies also is produced by discrete sources. In spite of the fact that the bulk of the 0.5-10 keV XRB was demonstrated to arise from extragalactic point sources, the spectral shape of the background presented a difficulty, referred to as the "spectral paradox". Spectra for classes of individual sources generally have been found to be incompatible with the observed energy index, alpha = 0.4 of the XRB over the 2-10 keV energy range. For the 0.3-3.0 keV Einstein band, Macca'caro et al. (1988) derived a mean energy spectral index of a approx. 0.95 for 599 extragalactic sources and for a subset of X-ray selected AGN, found alpha = 1.03(sup +0-05, sub -0.06) . Wilkes and Elvis showed that radio "loudness" was strongly correlated with the source spectrum, such that radio-load quasars exhibited flatter spectra (alpha approx. 0.5), while radio-quiet quasars had steeper spectra (alpha approx. 1). Studies of moderately faint sources in the 0.1-2.0 keV ROSAT band also found rather steep spectra (alpha = 0.96 +/- 0.11 for sources with an average flux of 1.5 x 10(exp -14) ergs/sq cm sec). At higher energies and much higher fluxes, energy spectra of individual AGN suggested a "canonical" alpha = 0.7 energy spectrum. Thus, the best evidence suggested that known classes of AGN could not readily explain the observed X-ray background spectrum. In our ROSAT PSPC analysis, we studied not only the traditional log N - log S, but also the spectral properties of the sources. We computed hardness ratios for individual sources and performed spectral fits to the summed source spectra, averaged in flux bins from 10(exp -15) to 10(exp -12) ergs/sq cm sec. We found that the hardness ratios and source spectra consistently show a hardening in the source spectra as the source fluxes decrease, confirming the suggestion by Hasinger et al. (1993).

Murray, Stephen S.↗
NASA NTRS1999

The ISO-IRAS Faint Galaxy Survey

As part of the ISO-IRAS Faint Galaxy Survey ISO Satellite observations of over 600 IRAS sources have been obtained with the ISOCAM instrument. Because our survey strategy involved relatively short integrations, great care was required in developing analysis software including cosmic-ray and transient removal and calibration. These observations have now been through final pipeline processing at IPAC and ground-based follow-up is ongoing. The observations are for sources from two samples: a " Filler' sample selected to be at z greater than 0.1 and a fainter sample which selected for the highest redshift galaxies in the IRAS survey, with redshifts 0.2 less than z less than 1.0. I now have obtained ground-based follow-up spectrophotometry at Lick and Palomar observatories for 100 LFIRGs with 0.1 less than z less than 0.7. Our observations have confirmed that these systems are comparable to nearby LFIRGs such as Arp 220, with L (sub -)(fir) greater than 10(exp 11) L(sub -) sun and typically HII/Liner optical excitation. About 10% of the galaxies show true AGN (Sy2) excitation. Based on our work on a nearby complete sample of LFIRGS, we believe that the majority of these systems are luminous Starbursts, thus this project is tracing the luminous end of the galaxy star-forming luminosity function - the (infrared) star-formation history of the Universe to z approx. 1, a topic of some considerable recent interest. A by-product of these ISOCAM observations is approximately 1 square degree of deep 2 microns pointings outside the IRAS error boxes, allowing us an independent estimate of the mid-infrared log N - log S relation. Ground-based observations of this sample are continuing.

Smith, Harding E.↗
NASA NTRS1999

Gamma-Ray Burst Class Properties

Guided by the Supervised pattern recognition algorithm C4.5, we examine the three gamma-ray burst classes identified by Mukherjee et al. C4.5 provides strong statistical support for this classification. However, with C4.5 and our knowledge of the BATSE instrument, we demonstrate that Class 3 (intermediate fluence, intermediate duration, soft) does not have to be a distinct source population: statistical/systematic errors in measuring burst attributes combined with the well-known hardness/intensity correlation can cause low peak flux Class I (high fluence, long, intermediate hardness) bursts to take on Class 3 characteristics naturally. Based on our hypothesis that the third class is not a distinct one, we provide rules so that future events can be placed in either Class I or Class 2 (low fluence, short, hard). Using classified bursts from the BATSE 4B Catalog, we plot log(N>P) vs. log(P) curves and study spectral features of each class. We find that the two classes are relatively distinct on the basis of spectral parameters, alpha, Beta, and E(sub peak) alone. Although this does not indicate a better basis for classification, it does suggest that different physical conditions exist for Class I and Class 2 bursts. In the process of studying burst class characteristics, we identify a new bias that affects measurement of burst fluences and durations. Using a simple model of how burst duration can be underestimated, we generally characterize how this fluence duration bias affects BATSE measurements, and demonstrate the type of effect it can have on the BATSE fluence vs. peak flux diagram.

Hakkila, Jon↗
NASA NTRS1999

Improved Algorithm to Estimate Convective and Stratiform Rain from TRMM Microwave Radiometer Data

The rain rates associated with Mesoscale Convective Systems (MCSS) deduced from the Tropical Rainfall Measuring Mission (TRMM) Precipitation Radar (PR) follow the well known log-normal type frequency distribution characteristic of conventional radars and rain gauges. On the other hand, the current microwave radiometer rain retrieval algorithms cannot give good representations of convective and stratiform precipitation. Thus they capture poorly this log-normal character. In particular, this is noticed clearly over land areas. The objective of the present study is to improve TRMM Microwave Imager (TMI) retrievals of convective and stratiform rain to a level comparable to the PR. For this purpose, we have developed a TMI rain retrieval algorithm that depends primarily on the 85 GHz brightness temperatures (Tbs) and their spatial distribution. We emphasize the 85 GHz channel because of its fine footprint size (about 5.5 km) and strong extinction property. The other spectral channels, because they are poorer in these respects, are given less importance. The brightness temperatures and spatial distribution information in the 85 GHz allows us to detect thunderstorms, or cumulonimbus clouds (Cbs), that are in different stages of development, as well as stratiform rain outside of these Cbs. Utilizing our retrieval technique, we have produced maps of convective and stratiform rain for several MCS events over land and ocean that agree well with those given by the PR. On average, the convective and stratiform rain rates given by our technique have an accuracy of about 15 % with respect to those given by the PR.

Prabhakara, C.↗
NASA NTRS2000

The Quasar Fraction in Low-Frequency Selected Complete Samples and Implications for Unified Schemes

Low-frequency radio surveys are ideal for selecting orientation-independent samples of extragalactic sources because the sample members are selected by virtue of their isotropic steep-spectrum extended emission. We use the new 7C Redshift Survey along with the brighter 3CRR and 6C samples to investigate the fraction of objects with observed broad emission lines - the 'quasar fraction' - as a function of redshift and of radio and narrow emission line luminosity. We find that the quasar fraction is more strongly dependent upon luminosity (both narrow line and radio) than it is on redshift. Above a narrow [OII] emission line luminosity of log(base 10) (L(sub [OII])/W) approximately > 35 [or radio luminosity log(base 10) (L(sub 151)/ W/Hz.sr) approximately > 26.5], the quasar fraction is virtually independent of redshift and luminosity; this is consistent with a simple unified scheme with an obscuring torus with a half-opening angle theta(sub trans) approximately equal 53 deg. For objects with less luminous narrow lines, the quasar fraction is lower. We show that this is not due to the difficulty of detecting lower-luminosity broad emission lines in a less luminous, but otherwise similar, quasar population. We discuss evidence which supports at least two probable physical causes for the drop in quasar fraction at low luminosity: (i) a gradual decrease in theta(sub trans) and/or a gradual increase in the fraction of lightly-reddened (0 approximately < A(sub V) approximately < 5) lines-of-sight with decreasing quasar luminosity; and (ii) the emergence of a distinct second population of low luminosity radio sources which, like M8T, lack a well-fed quasar nucleus and may well lack a thick obscuring torus.

Willott, Chris J.↗
NASA NTRS2000

Vertical Distributions of PH3 in Saturn from Observations of Its 1-0 and 3-2 Rotational Lines

Far-infrared Fourier-transform spectrometer measurements of the 1-0 and 3-2 PH3 transitions in Saturn's disk near 267 and 800 GHz (8.9 and 26.7/cm), respectively, were analyzed simultaneously to derive a global mean profile for the PH3 vertical mixing ratio between 100 and 600 mbar total pressure. The far-infrared spectrum is relatively free from spectral interlopers, suffers minimal absorption or scattering by atmospheric particulates, and contains intrinsically weak PH3 lines that are sensitive to a range of atmospheric depths. The combined spectra are inconsistent with a uniform tropospheric mixing ratio, even with a stratospheric cut-off. They are consistent with a volume mixing ratio of PH3 that drops from 1.2 x 10(exp -5) at 645 mbar pressure to a value of 4.1 x 10(exp -7) at 150 mbar pressure, a decrease that is linear is log abundance vs log pressure. The mixing ratio could drop even more quickly at atmospheric pressures below 150 mbar and still be consistent with the data. The mixing ratio may well remain constant with depth for pressures above 630 mbar. The maximum PH3 mixing ratio in this model is consistent with a [P]/[H] ratio in the deep atmosphere that is about a factor of 10 higher than solar composition. Such a model is consistent with rapid mixing up to the radiative-convective boundary and transport by, for example, vertical waves just above this boundary. In the best fitting model, the eddy diffusion coefficient is approximately 10(exp 4) sq cm near 630 mbar, and it must increase with altitude. The predominant PH3 loss mechanisms are direct photolysis by UV radiation and scavenging by H atoms produced by the photolysis.

Orton, G. S.↗
NASA NTRS2000

MAP Algorithms for Decoding Linear Block Codes Based on Sectionalized Trellis Diagrams

The maximum a posteriori probability (MAP) algorithm is a trellis-based MAP decoding algorithm. It is the heart of turbo (or iterative) decoding that achieves an error performance near the Shannon limit. Unfortunately, the implementation of this algorithm requires large computation and storage. Furthermore, its forward and backward recursions result in long decoding delay. For practical applications, this decoding algorithm must be simplified and its decoding complexity and delay must be reduced. In this paper, the MAP algorithm and its variations, such as log-MAP and max-log-MAP algorithms, are first applied to sectionalized trellises for linear block codes and carried out as two-stage decodings. Using the structural properties of properly sectionalized trellises, the decoding complexity and delay of the MAP algorithms can be reduced. Computation-wise optimum sectionalizations of a trellis for MAP algorithms are investigated. Also presented in this paper are bidirectional and parallel MAP decodings.

Lui, Ye↗
NASA NTRS1999

Deployment of Autonomous GPS Stations in Marie Byrd Land, Antarctica

During the 1998-1999 Antarctic field season, we installed three autonomous GPS stations in Marie Byrd Land, West Antarctica to measure glacio-isostatic rebound and rates of spreading across the West Antarctic Rift System. The systems collect data throughout the entire year and therefore must function during the warm, relatively mild summer, and cold, harsh winters. They are powered by gel cell batteries that are charged by wind and solar power. The system includes dual data logging capability. We log data at 5 minute intervals within the receiver and at 30 second intervals to a serial data logger. We do not require 365 days of continuous data for well determined crustal velocities, but rather long periods (greater than 24 hours) of continuous data distributed throughout the year. Therefore, for simplicity, we designed the system to accept occasional data interruptions. The batteries, in addition to supplying power, act as a thermal capacitive heat storage device to help regulate the temperatures within the system. This storage system absorbs the majority of the 10-15 watts of power from the receiver and 5 watts from the data logger which helps to maintain temperature for long periods of time. Power is switched off when the temperature within the system enclosure reaches 50'C and is reconnected at 20 C. If battery voltage drops too low the batteries will freeze. Therefore, we cut the power off when the batteries drop to a low voltage of 12.45V. Power is restored at 13.2V. The temperature and power hysteresis allows for a minimum of several days of data to be collected before system shutdowns. A check of all three stations in late January 1999 indicated that the thermal and power control systems are performing as expected. We plan to implement satellite telemetry to the systems during the 2000-2001 season following a year of development.

Donnellan, Andrea↗
NASA NTRS2000

Evaluation of Non-Ozone-Depleting-Chemical Cleaning Methods for Space Mechanisms Using a Vacuum Spiral Orbit Rolling Contact Tribometer

Because CFC 113, an ozone depleting chemical (ODC), can no longer be produced, alternative bearing cleaning methods must be studied. The objective of this work was to study the effect of the new cleaning methods on lubricant lifetime using a vacuum bearing simulator (spiral orbit rolling contact tribometer). Four alternative cleaning methods were studied: ultra-violet (UV) ozone, aqueous levigated alumina slurry (ALAS), super critical fluid (SCF) CO2 and aqueous Brulin 815GD. Baseline tests were done using CFC 113. Test conditions were the following: a vacuum of at least 1.3 x 10(exp -6) Pa, 440C steel components, a rotational speed of 10 RPM, a lubricant charge of between 60-75 micrograms, a perfluoropolyalkylether lubricant (Z-25), and a load of 200N (44.6 lbs., a mean Hertzian stress of 1.5 GPa). Normalized lubricant lifetime was determined by dividing the total number of ball orbits by the amount of lubricant. The failure condition was a friction coefficient of 0.38. Post-test XPS analysis was also performed, showing slight variations in post-cleaning surface chemistry. Statistical analysis of the resultant data was conducted and it was determined that the data sets were most directly comparable when subjected to a natural log transformation. The natural log life (NL-Life) data for each cleaning method were reasonably normally (statistically) distributed and yielded standard deviations that were not significantly different among the five cleaning methods investigated. This made comparison of their NL-Life means very straightforward using a Bonferroni multiple comparison of means procedure. This procedure showed that the ALAS, UV-ozone and CFC 113 methods were not statistically significantly different from one another with respect to mean NL-Life. It also found that the SCF CO2 method yielded a significantly higher mean NL-Life than the mean NL-Lives of the ALAS, UV-ozone and CFC 113 methods. It also determined that the aqueous Brulin 815GD method yielded a mean NL-Life that was statistically significantly higher than the mean NL-Lives of each of the other four methods. Baseline tests using CFC 113 cleaned parts yielded a mean NL-Life 3.62 orbits/micro-g. ALAS and UV-ozone yielded similar mean NL-Life (3.31 orbits/mg and 3.33 orbits/micro-g, respectively). SCF CO2, gave a mean NL-Life of 4.08 orbits/mg and aqueous Brulin 8l5GD data yielded the longest mean NL-Life (4.66 orbits/micro-g).

Jansen, Mark J.↗