Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Laboratory experiments”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,711 records · Page 95
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Hard x-ray imaging and characterization of staged z-pinch plasmas in order to exclude ion beams as cause of fusion

Prior to the start of the INFUSE project, a 1-D x-ray device had been developed to detect > 5 keV x-rays and, by using the device as a pinhole camera, determine the location of the source of these x-rays. The system was also used in a non-camera mode to measure the energy of the X-rays by having different thicknesses of attenuating material on different pixels. This dual-purpose had been used in three plasma experiments: the laboratory magnetized plasma jet at Caltech, the laboratory solar nanoflare at Caltech, and at the 500 kA staged Z-pinch (CESZAR) at UCSD. Preliminary measurements at the UCSD facility indicated that hard x-rays with energies ranging from ~27 to over 100 keV were created and that these x-rays likely originated at the Z-pinch’s anode. These preliminary data also indicated that the x-rays’ origin was coincident with the moment of peak compression. The major goal of the INFUSE proposal was to confirm these preliminary results. This confirmation was to be made by improving the imaging capability to two dimensions, increasing the time resolution of the camera, and using the x-ray diagnostic alongside time-resolved neutron detectors.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

Report on the Update and Codification of Expert Knowledge into ASTM Standard Practice E521

The overall purpose of the Grand Challenge Integrated Research Project (IRP), Accelerating the Qualification of Materials to Enable Rapid Deployment of Advanced Reactors, is to fulfill several objectives. The first objective is to complete and demonstrate/establish the process for predicting the microstructure and properties of structural materials in reactor and at high doses using ion irradiation as an accurate predictive tool for assessing behavior under reactor irradiation. The second objective is for this process to be adopted as part of an ASTM standard, and to work with the US Nuclear Regulatory Commission to utilize this standard in licensing decisions on advanced reactor designs for which such data are nonexistent or impractical to achieve. The need for standardized procedures is apparent based on the outcomes of a recent round-robin experiment from laboratories using ion beams for radiation damage studies and the roadmap for ion beam technologies to address challenges for the advancement of nuclear energy technologies.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2020

Soil Respiration and Microbial Biomass from Soil Incubations with 13C Labeled Additions

This data set provides the respiration and soil microbial biomass data from a series of short and long-term laboratory incubation experiments with 13C labeled substrates to examine how plant communities (forest vs. grassland), edaphic properties, and microbial communities influence C cycling and the long-term fate of C in soil systems. Paired forest and grassland soils from four locations were incubated with 13C labeled glucose in a short-term (144 hours) study while 13C labeled cellulose was added to soils used in the long-term (729 days) study. Soil respiration, microbial biomass, and soil 13C values were monitored throughout the study. Soils were collected from paired forest and grassland locations in the following states in the United States of America: Tennessee (TN), Ohio (OH), Iowa (IA), and Missouri (MO). This dataset contains one data file in comma-separate (*.csv) format.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Differential Organic Carbon Mineralization Responses to Soil Moisture in Three Different Soil Orders Under Mixed Forested System

Soil microbial respiration is one of the largest sources of carbon (C) emissions to the atmosphere in terrestrial ecosystems, which is strongly dependent on multiple environmental variables including soil moisture. Soil moisture content is strongly dependent on soil texture, and the combined effects of texture and moisture on microbial respiration are complex and less explored. Therefore, this study examines the effects of soil moisture on the mineralization of soil organic C Soil organic carbon in three different soils, Ultisol, Alfisol and Vertisol, collected from mixed forests of Georgia, Missouri, and Texas, United States , respectively. A laboratory microcosm experiment was conducted for 90 days under different moisture regimes. Soil respiration was measured weekly, and destructive harvests were conducted at 1, 15, 60, and 90 days after incubation to determine extractable organic C (EOC), phospholipid fatty acid based microbial community, and C-acquiring hydrolytic extracellular enzyme activities (EEA). The highest cumulative respiration in Ultisol was observed at 50% water holding capacity (WHC), in Alfisol at 100% water holding capacity, and in Vertisol at 175% WHC. The trends in Extractable Organic Carbon were opposite to that of cumulative microbial respiration as the moisture levels showing the highest respiration showed the lowest EOC concentration in all soil types. Also, extracellular enzyme activities increased with increase in soil moisture in all soils, however, respiration and EEA showed a decoupled relationship in Ultisol and Alfisol soils. Soil moisture differences did not influence microbial community composition.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Tidal Turbine Benchmarking Project: Stage I - Steady Flow Blind Predictions: Preprint

This paper presents the first blind prediction stage of the Tidal Turbine Benchmarking Project being conducted and funded by the UK's EPSRC and Supergen ORE Hub. In this first stage, only steady flow conditions, at low and elevated turbulence (3.1%) levels, were considered. Prior to the blind prediction stage, a large laboratory scale experiment was conducted in which a highly instrumented 1.6m diameter tidal rotor was towed through a large towing tank in well-defined flow conditions with and without an upstream turbulence grid. Details of the test campaign and rotor design were released as part of this community blind prediction exercise. Participants were invited to use a range of engineering modelling approaches to simulate the performance and loads of the turbine. 26 submissions were received from 12 groups from across academia and industry using solution techniques ranging from blade resolved computational fluid dynamics through actuator line, boundary integral element methods, vortex methods to engineering Blade Element Momentum methods. The comparisons between experiments and blind predictions were extremely positive helping to provide validation and uncertainty estimates for the models, but also validating the experimental tests themselves. The exercise demonstrated that the experimental turbine data provides a robust data set against which researchers and design engineers can test their models and implementations to ensure robustness in their processes, helping to reduce uncertainty and provide increased confidence in engineering processes. Furthermore, the data set provides the basis by which modellers can evaluate and refine approaches.

benchmarking↗
DOE OSTI2022

Observations of gas-phase products from the nitrate-radical-initiated oxidation of four monoterpenes

Abstract. Chemical ionization mass spectrometry with the nitrate reagent ion (NO3- CIMS) was used to investigate the products of the nitrate radical (NO3) initiated oxidation of four monoterpenes in laboratory chamber experiments. α-Pinene, β-pinene, Δ-3-carene, and α-thujene were studied. The major gas-phase species produced in each system were distinctly different, showing the effect of monoterpene structure on the oxidation mechanism and further elucidating the contributions of these species to particle formation and growth. By comparing groupings of products based on the ratios of elements in the general formula CwHxNyOz, the relative importance of specific mechanistic pathways (fragmentation, termination, and radical rearrangement) can be assessed for each system. Additionally, the measured time series of the highly oxidized reaction products provide insights into the ratio of relative production and loss rates of the high-molecular-weight products of the Δ-3-carene system. The measured effective O:C ratios of reaction products were anticorrelated with new particle formation intensity and number concentration for each system; however, the monomer : dimer ratios of products had a small positive trend. Gas-phase yields of oxidation products measured by NO3- CIMS correlated with particle number concentrations for each monoterpene system, with the exception of α-thujene, which produced a considerable amount of low-volatility products but no particles. Species-resolved wall loss was measured with NO3- CIMS and found to be highly variable among oxidized reaction products in our stainless steel chamber.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1966

Sterilization facilities

Clean room assembly and sterilization laboratories for experiments on Voyager capsule, components and modules

STERILIZATION↗
NASA NTRS1972

The effect of phosphorus on the formation of the Widmanstaetten pattern in iron meteorites.

Use of a combination of a revised Fe-Ni-P phase diagram and laboratory cooling experiments on Fe-Ni-P alloys to determine the effect of P on the formation of the Widmanstaetten pattern. From the phase diagram results, two reaction paths were found for the formation of kamacite (1) gamma (taenite) yields alpha (kamacite) + gamma (taenite) and (2) gamma yields gamma + Ph /phosphide, (FeNi)3P/ yields alpha + gamma + Ph. The reaction path gamma yields alpha + gamma is preferred at low P contents, while at higher P contents and at Ni contents greater than 7.0 wt.%, the reaction path gamma yields gamma + Ph yields alpha + gamma + Ph controls the formation of kamacite. Above 7 wt.% Ni, the effect of P on the equilibrium nucleation temperature of kamacite is quite small, less than about plus or minus 30 C with respect to the Fe-Ni binary diagram. The addition of P (greater than 0.1 wt.%) to meteorites promotes nucleation of kamacite at higher temperatures and effectively lowers the amount of undercooling necessary to nucleate kamacite homogeneously. Ni has just the opposite effect, decreasing the temperature of nucleation and increasing the amount of undercooling. It is concluded that significant amounts of undercooling, 50 to 100 C, are necessary for the nucleation of the Widmanstaetten structure in meteorites, and that chemical equilibrium is maintained in the various phases of slowly cooled iron meteorites to 650 C and probably to 600 C.

Goldstein, J. I.↗
NASA NTRS1972

Photo-reconnaissance applications of computer processing of images.

Discussion of imaging processing techniques for enhancement and calibration of Jet Propulsion Laboratory imaging experiment pictures returned from NASA space vehicles such as Ranger, Mariner and Surveyor. Particular attention is given to data transmission, resolution vs recognition, and color aspects of digital data processing. The effectiveness of these techniques in applications to images from a wide variety of sources is noted. It is anticipated that the use of computer processing for enhancement of imagery will increase with the improvement and cost reduction of these techniques in the future.

Billingsley, F. C.↗
NASA NTRS1972

Definition of experiments and instruments for a communication/navigation research laboratory. Volume 4: Programmatics

Details are provided for scheduling, cost estimates, and support research and technology requirements for a space shuttle supported manned research laboratory to conduct selected communication and navigation experiments. A summary of the candidate program and its time phasing is included, as well as photographs of the 1/20 scale model of the shuttle supported Early Comm/Nav Research Lab showing the baseline, in-bay arrangement and the out-of-bay configuration.

Source record↗
NASA NTRS1973

Debye-Scherrer investigations of experimentally shocked silicates.

Small ballistic ranges were used to perform controlled laboratory shock experiments on 12 selected silicates. Debye-Scherrer investigations of shocked materials revealed a gradual lattice breakdown of crystalline matter under shock. Individual mineral species behave selectively. Sheet silicates break down very easily, followed by tecto-silicates. Chain-, ino- and ortho-silicates are of considerably higher shock resistance. Depending on the mineral species, the first sign of shock damage is evidenced in the long range order at 20-70 kb. At intermediate pressures (100-200 kb) the long range order is essentially destroyed with the short range order heavily disturbed. At pressures exceeding 300 kb tecto-silicates are completely collapsed.

Hoerz, F.↗
NASA NTRS1973

Interference filters for the VUV /1200-1900 A/.

Description of modified aluminum-dielectric Fabry-Perot interference filters fabricated on a Schroeder evaporation-monitor apparatus (1962) for use at wavelengths below 1700 A. The filters were made for stellar photometers flown in the Wisconsin Experiment on the Orbiting Astronomical Observatory and for use in rocket-borne experiments and laboratory calibration work.

Fairchild, E. T.↗
NASA NTRS1973

Lunar rocks as meteoroid detectors

About 5000 microcraters on seven lunar rocks recovered during the Apollo 12 mission have been systematically studied using a stereomicroscope. Based on comparisons with laboratory cratering experiments, at least 95 percent of all millimeter sized craters observed were formed by impacts in which the impact velocity exceeded 10 km/s. The dynamics of particle motion near the moon and the distribution of microcraters on the rocks require an extralunar origin for these impacting particles. The microcrater population on at least one side of all rocks studied was in equilibrium for millimeter sized craters; i.e., statistically, craters a few millimeters in diameter and smaller were being removed by the superposition of new craters at the same rate new craters were being formed. The population of craters on such a surface is directly related to the total population of particles impacting that surface. Crater size distribution data together with an experimentally determined relationship between the crater size and the physical parameters of the impacting particle, yield the mass distribution of interplanetary dust at 1 AU.

Hartung, J. B.↗
NASA NTRS1973

Numerical simulation of small-scale thermal convection in the atmosphere

A Boussinesq system is integrated numerically in three dimensions and time in a study of nonhydrostatic convection in the atmosphere. Simulation of cloud convection is achieved by the inclusion of parametrized effects of latent heat and small-scale turbulence. The results are compared with the cell structure observed in Rayleigh-Benard laboratory conversion experiments in air. At a Rayleigh number of 4000, the numerical model adequately simulates the experimentally observed evolution, including some prominent transients of a flow from a randomly perturbed initial conductive state into the final state of steady large-amplitude two-dimensional rolls. At Rayleigh number 9000, the model reproduces the experimentally observed unsteady equilibrium of vertically coherent oscillatory waves superimposed on rolls.

Somerville, R. C. J.↗
NASA NTRS1974

Laboratory study of sonic booms and their scaling laws

This program undertook to seek a basic understanding of non-linear effects associated with caustics, through laboratory simulation experiments of sonic booms in a ballistic range and a coordinated theoretical study of scaling laws. Two cases of superbooms or enhanced sonic booms at caustics have been studied. The first case, referred to as acceleration superbooms, is related to the enhanced sonic booms generated during the acceleration maneuvers of supersonic aircrafts. The second case, referred to as refraction superbooms, involves the superbooms that are generated as a result of atmospheric refraction. Important theoretical and experimental results are briefly reported.

Toong, T. Y.↗