Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “IMPORTS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,711 records · Page 95

Importance of inlet boundary conditions for numerical simulation of combustor flows

Fluid dynamic computer codes for the mathematical simulation of problems in gas turbine engine combustion systems are required as design and diagnostic tools. To eventually achieve a performance standard with these codes of more than qualitative accuracy it is desirable to use benchmark experiments for validation studies. Typical of the fluid dynamic computer codes being developed for combustor simulations is the TEACH (Teaching Elliptic Axisymmetric Characteristics Heuristically) solution procedure. It is difficult to find suitable experiments which satisfy the present definition of benchmark quality. For the majority of the available experiments there is a lack of information concerning the boundary conditions. A standard TEACH-type numerical technique is applied to a number of test-case experiments. It is found that numerical simulations of gas turbine combustor-relevant flows can be sensitive to the plane at which the calculations start and the spatial distributions of inlet quantities for swirling flows.

Sturgess, G. J.↗

The importance of the space station as an element of the total Space System architecture

The paper describes the role of the Space Station in the ensemble of the space-based infrastructure necessary for achieving permanent manned presence in space. The major elements of the architecture are identified, functionally interrelated and discussed in terms of their evolutionary development as an extension of current STS capabilities. It is shown that they require a logical succession of flight R&D experiments and demonstrations using the Space Shuttle and the Space Station as test beds. The paper describes the interrelationships between the Space Station and the various major infrastructure elements and shows that the latter are indispensable for full operational utilization of the former. Only the total ensemble of the architecture provide all the necessary prerequisites for permanent manned presence in space.

Bekey, I.↗

Importance of gravity for plant growth and behavior

Accomplishments during the past fiscal year consisted of (1) completion of research on a study of the kinetics of damping out of circummutation when the axially directed g-force was abruptly eliminated (Research Task NULYRL). (2) Further experiments were accomplished on a comprehensive study, underway for several years, to validate (or invalidate) the use of clinostat rotation as a hypogravity simulation device. (3) Some of our earlier (unpublished) observations on plant seedlings resistance to g-loading were evaluated, interpreted, and a paper was submitted for publication (Research Task HYGEFF). (4) In what has been called ""Shuttle middeck locker ecology" an attempt to acquire reliable empirical information on the thermal profile experienced by test packages housed in middeck lockers (MDDL) during shuttle flights at long last seems to be yielding some results.

Brown, A. H.↗

Some properties of transient phenomena in the extra-tropical region and their importance in the seasonal mean flow

When studying data for one season, it is convenient to divide transient eddies into those of the synoptic time scale and those of lower frequency. Where the dividing line is placed is not crucial, but a 10-day period is used in a study of the 1979-1980 Northern Hemisphere winter. The synoptic time scale eddies exhibit maximum kinetic energy in stormtracks slightly downstream from and poleward of the Atlantic and Pacific jet maximum. An alternative approach is via the anisotropic part of the horizontal velocity correlation tensor, the axis of which gives the local orientation of the eddies and the magnitude a measure of the extension of the eddies. When the man velocity field is almost that of the plane waves, the horizontal group velocity relative to the mean field is also related to this tensor. The synoptic time scale eddies force the mean flow in the sense of reducing the baroclinic component in the upstream of the region of the stormtrack. The lower frequency eddies have a very different signature.

Hoskins, B. J.↗

Photometry of icy satellites: How important is multiple scattering in diluting shadows?

Voyager observations have shown that the photometric properties of icy satellites are influenced significantly by large-scale roughness elements on the surfaces. While recent progress was made in treating the photometric effects of macroscopic roughness, it is still the case that even the most complete models do not account for the effects of multiple scattering fully. Multiple scattering dilutes shadows caused by large-scale features, yet for any specific model it is difficult to calculate the amount of dilution as a function of albedo. Accordingly, laboratory measurements were undertaken using the Cornell Goniometer to evaluate the magnitude of the effect.

Buratti, B.↗

The importance of thermal-vacuum testing in achieving high reliability of spacecraft mechanisms

The work performed on thermal vacuum testing of complex mechanisms is described. The objective of these tests is to assess the mechanism reliability by monitoring performance in an environment that closely resembles the environment that will occur during flight. To be both valid and cost effective, these tests are performed in a detailed, formally controlled manner. A review of the major test observations is given, during which time some failure modes are detected. Full confidence now exists in many mechanism and component designs, and much valuable data obtained.

Parker, K.↗

The importance of altimeter and scatterometer data for ocean prediction

The prediction of ocean circulation using satellite altimeter data is discussed. Three classes of oceanic response to atmospheric forcing are outlined and examined. Storms, surface waves, eddies, and ocean currents were evaluated in terms of forecasting time requirements. Scatterometer and radiometer applications to ocean prediction are briefly reviewed.

Hurlburt, H. E.↗

Properties of ferrites important to their friction and wear behavior

Environmental, chemical and crystallographical effects on the fundamental nature on friction and wear of the ferrites in contact with metals, magnetic tapes and themselves are reviewed. The removal of adsorbed films from the surfaces of ferrites results in very strong interfacial adhesion and high friction in ferrite to metal and ferrite to magnetic tape contacts. The metal ferrite bond at the interface is primarily a chemical bond between the metal atoms and the large oxygen anions in the ferrite surface, and the strength of these bonds is related to the oxygen to metal bond strength in the metal oxide. The more active the metal, the higher is the coefficient of friction. Not only under adhesive conditions, but also under abrasive conditions the friction and wear properties of ferrites are related to the crystallographic orientation. With ferrite to ferrite contact the mating of highest atomic density (most closely packed) direction on matched crystallographic planes, that is, 110 directions on /110/planes, results in the lowest coefficient of friction.

Miyoshi, K.↗

Microstructure and surface chemistry of amorphous alloys important to their friction and wear behavior

An investigation was conducted to examine the microstructure and surface chemistry of amorphous alloys, and their effects on tribological behavior. The results indicate that the surface oxide layers present on amorphous alloys are effective in providing low friction and a protective film against wear in air. Clustering and crystallization in amorphous alloys can be enhanced as a result of plastic flow during the sliding process at a low sliding velocity, at room temperature. Clusters or crystallines with sizes to 150 nm and a diffused honeycomb-shaped structure are produced on the wear surface. Temperature effects lead to drastic changes in surface chemistry and friction behavior of the alloys at temperatures to 750 C. Contaminants can come from the bulk of the alloys to the surface upon heating and impart to the surface oxides at 350 C and boron nitride above 500 C. The oxides increase friction while the boron nitride reduces friction drastically in vacuum.

Miyoshi, K.↗

Importance of interatomic spacing in catalytic reduction of oxygen in phosphoric acid

A correlation between the nearest-neighbor distance and the oxygen reduction activity of various platinum alloys is reported. It is proposed that the distance between nearest-neighbor Pt atoms on the surface of a supported catalyst is not ideal for dual site absorption of O2 or 'HO2' and that the introduction of foreign atoms which reduce the Pt nearest-neighbor spacing would result in higher oxygen reduction activity. This may allow the critical 0-0 bond interatomic distance and hence the optimum Pt-Pt separation for bond rupture to be determined from quantum chemical calculations. A composite analysis shows that the data on supported Pt alloys are consistent with Appleby's (1970) data on bulk metals with respect to specific activity, activation energy, preexponential factor, and percent d-band character.

Jalan, V.↗

Photovoltaic power - An important new energy option

A review of photovoltaic (PV) power technology is presented with an emphasis of PV as an economical and technically feasible alternative source of energy. The successful completion of the development and transfer of emerging low-cost technologies into a fully commercialized status are identified as the means to the realization of this option's full potential. The DOE National Photovoltaics Program, a significant sponsor of PV R&D, expects both flat-plate and concentrator collectors to meet established cost targets. Citing the DOE large flat-plate grid-connected system project of the Sacramento Municipal Utility District, current technology modules priced at near $5/Wp (1983 dollars) are steadily reducing costs. A recent DOE study suggests that PV-generated electricity produced at a 30-year levelized cost of 15 cents per kWh would represent a viable energy supply alternative for the nation.

Ferber, R. R.↗

The importance of nonlinearity on the higher harmonic control of helicopter vibration

The effect of nonlinearity on the higher harmonic control (HHC) of helicopter vibration is investigated using a nonlinear aeroelastic simulation. A nonlinear solution is proposed which relates the HHC inputs to vibration outputs on the basis of a Volterra functional series. The Volterra series solution is shown to reduce to a vector polynomial equation relating HHC inputs to vibration outputs at any harmonic frequency. The nonlinear transfer relationship is identified from a nonlinear vibration analysis computer program, and the identification model is examined in detail. Improvements to current HHC algorithms are presented, and several Kalman filter divergence problems are quantified.

Molusis, J. A.↗

Laboratory studies of atomic collision processes of importance in planetary atmospheres

Progress in the following research supported under NSG 7386 is reported: (1) measurement of differential cross sections for atomic and molecular collisions relevant to analysis and modeling of data from Pioneer 11, Pioneer 12, Voyager 1, and Voyager 2; (2) analysis of measured differential cross section results to provide scattering data in forms that are easy to apply to atmospheric modeling work; (3) analysis of the data to give basic information on the molecular potentials involved in the scattering process; and (4) development and initial use of apparatus to study dissociative processes in neutral molecules.

Stebbings, R. F.↗

Lunar Mascon Loading: an Example of the Importance of Fault Initiation Depth on Fault Type Predictions from Stresses on Planetary Surfaces

Geophysical models that predict fault type from stresses calculated at the planetary surface (zero depth) can be misleading because faults generally initiate at depth under a different stress regime and propagate to the surface. The generally accepted and most commonly employed criteria for fault prediction from calculated stresses on planetary surfaces points out problems in neglecting the effects of non-isotropic overburden stresses and the use of realistic material constants and shows a well known example (mascon loading on the moon) where neglecting this effect predicts a different type of fault than is actually observed.

Golombek, M. P.↗

Importance of the Tectonic Motions on Ganymede

Voyager close up views of Ganymede reveal some provinces of old, cratered, dark terrains that are broken into polygons and cut through by light stripes of grooved terrains. The groove terrain unit and its relationships with the other units was studied at various scales because these features seem to relate at least to two main scales of processes. Minor displacements concerning only local features, i.e., large scale processes and major displacements concerning usually the major evolution of the surface, i.e., small scale processes. It appears that tectonic processes, at least in the studied areas, if playing a role in the formation of local or regional features, are very limited. The conclusions reached agree with those of Thomas et al. who show that post grooves basins reveal the presence of a primitive grid that is not disturbed by the grooved terrains.

Forni, O. P.↗

Photoabsorption and photodissociation of molecules important in the interstellar medium

The photoabsorption and photodissociation cross sections of several interstellar molecules and radicals in the 105 to 210 nm region were measured. The research results accomplished are briefly described. Photoabsorption cross sections of OD and CN, and photoabsorption and photodissociation of HCl, and photoabsorption and photodissociation cross sections of CH3OH are discussed.

Lee, L. C.↗

Important loss mechanisms in high-efficiency solar cells

A study was conducted to identify loss mechanisms in high efficiency silicon solar cells. The following were considered: (1) recombination loss mechanisms; (2) high efficiency cells; (3) very high efficiency cells; and (4) ultra high efficiency cells.

Sah, C. T.↗