SEARCH · Engineering Papers
Results for “HALIDES”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Narrow Emission from Rb 3 Sb 2 I 9 Nanoparticles
Abstract Metal halide perovskites have gained attention for their optoelectronic properties and are employed as the active layer in solar cells, light‐emitting diodes, and photodetectors. However, the use of lead in the best‐performing perovskite devices may limit their wider application. Prior reports of lead‐free perovskite nanoparticles have exhibited linewidths more than twice as wide as their lead‐halide counterparts, limiting their attainable color gamut. Here the solution synthesis of lead‐free Rb 3 Sb 2 I 9 nanoplatelets and single crystals is reported; the single crystals exhibit broad (full‐width at half‐maximum (FWHM) = 75 nm) photoluminescence centered at 635 nm, while the nanoplatelets exhibit narrow emission (FWHM = 21 nm) at 512 nm. The photoluminescence quantum yield of both the single crystals and nanoplatelets is low and the present demonstration of the narrowest emission among all lead‐free perovskites reported to date motivates further study of how these and related materials can achieve further‐enhanced brightness.
Reduced Energetic Disorders in Dion–Jacobson Perovskites for Efficient and Spectral Stable Blue LEDs
Metal halide perovskites have witnessed great success in green, red, and near-infrared light-emitting diodes (LEDs), yet blue LEDs still lag behind. Reducing undesired energetic disorders – broad n -phases and halide segregation – is considered as the most critical strategy to further improve the performances. Here, the study reports a newly designed and synthesized di-ammonium ligand with rigid π -conjugated rings and additional methyl groups to construct Dion–Jacobson (DJ) structure. Augmented coordination from the extra ammonium site and increased effective bulkiness from methyl groups lead to better distribution control over conventional mono-ammonium ligands. This enhances the radiative recombination of blue emissions in the film with homogeneous energy landscape and improved surface morphology, as evidenced by a series of imaging and mapping techniques. As a result, it demonstrates DJ perovskite LEDs (PeLEDs) with peak external quantum efficiencies of ≈4% at 484 nm and ≈11% at 494 nm, which are among the top reported for pure DJ phase-based PeLEDs in the corresponding wavelength regions. The results deepen the understanding of regulating energetic disorders in perovskite materials via molecular engineering.
Tailoring Ion Transport in Li 3‐3y Ho 1+y Cl 6‐x Br x via Transition‐Metal Free Structural Planes and Charge Carrier Distribution
Abstract Localized atomistic disorder in halide‐based solid electrolytes (SEs) can be leveraged to boost Li + mobility. In this study, Li + transport in structurally modified Li 3 HoCl 6 , via Br − introduction and Li + deficiency, is explored. The optimized Li 3‐3 y Ho 1+ y Cl 6‐ x Br x achieves an ionic conductivity of 3.8 mS cm −1 at 25 °C, the highest reported for holmium halide materials. 6,7 Li nuclear magnetic resonance and relaxometry investigations unveil enhanced ion dynamics with bromination, attaining a Li + motional rate neighboring 116 MHz. X‐ray diffraction analyses reveal mixed‐anion‐induced phase transitions with disproportionate octahedral expansions and distortions, creating Ho‐free planes with favorable energetics for Li + migration. Bond valence site energy analysis highlights preferred Li + transport pathways, particularly in structural planes devoid of Ho 3+ blocking effects. Molecular dynamics simulations corroborate enhanced Li + diffusion with Br − introduction into Li 3 HoCl 6 . Li‐Ho electrostatic repulsions in the (001) plane presumably drive Li + diffusion into the Ho‐free (002) layer, enabling rapid intraplanar Li + motion and exchange between the 2d and 4h sites. Li 3‐3 y Ho 1+ y Cl 6‐ x Br x also demonstrates good battery cycling stability. These findings offer valuable insights into the intricate correlations between structure and ion transport and will help guide the design of high‐performance fast ion conductors for all‐solid‐state batteries.
Perovskite Electronic Ratchets for Energy Harvesting
Electronic ratchets are energy-harvesting devices that can utilize spatially asymmetric potential distributions to convert nondirectional/random sources of energy into direct current. The potential asymmetry can be generated in a number of ways, but one purported mechanism is to redistribute ions directly within the active material. Utilizing the known propensity for ion migration in lead-halide perovskites (LHP), the first LHP flashing electronic ratchet is demonstrated by using a voltage stress to intentionally redistribute halide ions within a prototypical 2D perovskite. The resulting asymmetric potential distribution across the 2D perovskite allows for conversion of both electronic noise and unbiased square-wave potentials into current. Furthermore, simultaneous application of light illumination and voltage stress enhances the asymmetric potential distribution, enabling higher current than the nonilluminated device. This work presents an electronic ratchet system that exploits facile ion migration, which can be modified by both electrical and optical stimuli, providing a model system with the potential to test outstanding mechanistic questions for electronic ratchets.
Improved Efficiency and Stability of Pb/Sn Binary Perovskite Solar Cells Fabricated by Galvanic Displacement Reaction
In this work, a simple and generally applicable method of fabricating efficient and stable Pb-Sn binary perovskite solar cells (PVSCs) based on a galvanic displacement reaction (GDR) is demonstrated. Different from the commonly used conventional approaches to form perovskite precursor solutions by mixing metal halides and organic halides such as PbI 2 , SnI 2 , MAI, FAI, etc., together, the precursor solutions are formulated by reacting pure Pb-based perovskite precursor solutions with fine Sn metal powders. After the ratios between Pb and Sn are optimized, high PCEs of 15.85% and 18.21% can be achieved for MAPb 0.4 Sn 0.6 I 3 and (FAPb 0.6 Sn 0.4 I 3 ) 0.85 (MAPb 0.6 Sn 0.4 Br 3 ) 0.15 based PVSCs, which are the highest PCEs among all values reported to date for Pb-Sn binary PVSCs. Moreover, the GDR perovskite-based PVSCs exhibit significantly improved ambient and thermal stability with encapsulation, which can retain more than 90% of their initial PCEs after being stored in ambient (relative humidity (RH) ≈50%) for 1000 h or being thermal annealed at 80 °C for more than 120 h in ambient conditions. These results demonstrate the advantage of using GDR to prepare tunable bandgap binary perovskites for devices with greatly improved performance and stability.
Enhanced Nucleation of Atomic Layer Deposited Contacts Improves Operational Stability of Perovskite Solar Cells in Air
Metal-halide perovskites show promise as highly efficient solar cells, light-emitting diodes, and other optoelectronic devices. Ensuring long-term stability is now a major priority. In this study, an ultrathin (2 nm) layer of polyethylenimine ethoxylated (PEIE) is used to functionalize the surface of C 60 for the subsequent deposition of atomic layer deposition (ALD) SnO 2 , a commonly used electron contact bilayer for p-i-n devices. The enhanced nucleation results in a more continuous initial ALD SnO 2 layer that exhibits superior barrier properties, protecting Cs 0.25 FA 0.75 Pb(Br 0.20 | 0.80 ) 3 films upon direct exposure to high temperatures (200 degrees C) and water. This surface modification with PEIE translates to more stable solar cells under aggressive testing conditions in air at 60 degrees C under illumination. This type of 'built-in' barrier layer mitigates degradation pathways not addressed by external encapsulation, such as internal halide or metal diffusion, while maintaining high device efficiency up to 18.5%. This nucleation strategy is also extended to ALD VOx films, demonstrating its potential to be broadly applied to other metal oxide contacts and device architectures.
A Comparative Study of Redox Mediators for Improved Performance of Li-Oxygen Batteries.
Redox meditators (RMs) are soluble catalysts located in an electrolyte that can improve the energy efficiency (reduced overpotential) and cyclability of Li-oxygen (Li-O-2) batteries. In this work, 20 RMs within a Li-O-2 system with dimethyl sulfoxide and tetraethylene glycol dimethyl ether electrolytes are studied and their electrochemical features such as redox potential, the separation of cathodic and anodic peaks, and their current intensities are measured using cyclic voltammetry (CV) experiments. Six RMs are selected as "primary" choices based on their electrochemical performance, and stability tests are then performed to examine their electrochemical responses after consecutive cycles. Moreover, galvanostatic cycling tests are performed within a Li-O-2 battery system assembled with selected six RMs for real case consistency investigations. It is found that results from CV to galvanostatic cycling tests are consistent for halides and organometallic RMs, where the former exhibit much higher stability. However, the organic RMs show high reversibility in CV but low in battery cycling results. Density functional theory calculations are carried out to gain more understanding of the stability and redox potentials of the RMs. This study provides comparative information to select the most reliable RMs for Li-O-2 batteries along with new fundamental understanding of their electrochemical activity and stability.
Crack‐Free Single‐Crystalline LiNiO 2 for High Energy Density All‐Solid‐State Batteries
Abstract Single‐crystalline layered oxide (LiNi 1‐ x ‐ y Mn x Co y O 2 ) cathodes have been found to exhibit exceptional electrochemical properties when coupled with various inorganic solid electrolytes (ISEs) in all‐solid‐state batteries (ASSBs). Their advantages stem from the robust morphological integrity with the absence of grain boundaries and the high electrochemical oxidative stability. Here, ASSBs featuring single‐crystalline LiNiO 2 (LNO) with the highest Ni content are reported, offering a high theoretical specific capacity of 275 mAh g ‐1 alongside a high average discharge voltage (3.7 V vs Li + /Li). Through a careful investigation, it is demonstrated that micron‐sized single‐crystalline LNO (µSC‐LNO) composite cathodes with a halide ISE exhibit a high initial discharge capacity of 205 mAh g ‐1 with an outstanding cycle performance over 200 cycles in room‐temperature ASSBs. The significance of engineering parameters is emphasized, such as particle size and specific density, in promoting a homogeneous and fast Li + transport within the composite cathodes. Furthermore, the formation of undesirable interphase between the halide ISE in the cathode and sulfide ISE separator is elucidated, which may be a critical factor impeding long‐term cyclability of ASSBs. This work provides insights into the design of composite cathodes for high‐energy‐density ASSBs.
Synthesis and Reactivity of Paramagnetic Nickel Polypyridyl Complexes Relevant to C(sp 2 )–C(sp 3 )Coupling Reactions
Abstract A number of new transition metal catalyzed methods for the formation of C(sp 2 )–C(sp 3 ) bonds have recently been described. These reactions often utilize bidentate polypyridyl‐ligated Ni catalysts, and paramagnetic Ni I halide or aryl species are proposed in the catalytic cycles. However, there is little knowledge about complexes of this type. Here, we report the synthesis of paramagnetic bidentate polypyridyl‐ligated Ni halide and aryl complexes through elementary reactions proposed in catalytic cycles for C(sp 2 )–C(sp 3 ) bond formation. We investigate the ability of these complexes to undergo organometallic reactions that are relevant to C(sp 2 )–C(sp 3 ) coupling through stoichiometric studies and also explore their catalytic activity.
High Compression‐Induced Conductivity in a Layered Cu–Br Perovskite
Abstract We show that the onset pressure for appreciable conductivity in layered copper‐halide perovskites can decrease by ca. 50 GPa upon replacement of Cl with Br. Layered Cu–Cl perovskites require pressures >50 GPa to show a conductivity of 10 −4 S cm −1 , whereas here a Cu–Br congener, (EA) 2 CuBr 4 (EA=ethylammonium), exhibits conductivity as high as 2×10 −3 S cm −1 at only 2.6 GPa, and 0.17 S cm −1 at 59 GPa. Substitution of higher‐energy Br 4p for Cl 3p orbitals lowers the charge‐transfer band gap of the perovskite by 0.9 eV. This 1.7 eV band gap decreases to 0.3 eV at 65 GPa. High‐pressure X‐ray diffraction, optical absorption, and transport measurements, and density functional theory calculations allow us to track compression‐induced structural and electronic changes. The notable enhancement of the Br perovskite's electronic response to pressure may be attributed to more diffuse Br valence orbitals relative to Cl orbitals. This work brings the compression‐induced conductivity of Cu‐halide perovskites to more technologically accessible pressures.
Evolution of Surface Chemistry in Two‐Dimensional MXenes: From Mixed to Tunable Uniform Terminations
Abstract Surface chemistry of MXenes is of great interest as the terminations can define the intrinsic properties of this family of materials. The diverse and tunable terminations also distinguish MXenes from many other 2D materials. Conventional fluoride‐containing reagents etching approaches resulted in MXenes with mixed fluoro‐, oxo‐, and hydroxyl surface groups. The relatively strong chemical bonding of MXenes’ surface metal atoms with oxygen and fluorine makes post‐synthetic covalent surface modifications of such MXenes unfavorable. In this minireview, we focus on the recent advances in MXenes with uniform surface terminations. Unconventional methods, including Lewis acidic molten salt etching (LAMS) and bottom‐up direct synthesis, have been proven successful in producing halide‐terminated MXenes. These synthetic strategies have opened new possibilities for MXenes because weaker surface chemical bonds in halide‐terminated MXenes facilitate post‐synthetic covalent surface modifications. Both computational and experimental results on surface termination‐dependent properties are summarized and discussed. Finally, we offer our perspective on the opportunities and challenges in this exciting research field.
Facile Reductive Silylation of UO 2 2+ to Uranium(IV) Chloride
General reductive silylation of the UO 2 2+ cation occurs readily in a one-pot, two-step stoichiometric reaction at room temperature to form uranium(IV) siloxides. Addition of two equivalents of an alkylating reagent to UO 2 X 2 (L) 2 (X=Cl, Br, I, OTf; L=triphenylphosphine oxide, 2,2'-bipyridyl) followed by two equivalents of a silyl (pseudo)halide, R 3 Si-X (R=aryl, alkyl, H; X=Cl, Br, I, OTf, SPh), cleanly affords (R 3 SiO) 2 UX 2 (L) 2 in high yields. Support is included for the key step in the process, reduction of UVI to UV. This procedure is applicable to a wide range of commercially available uranyl salts, silyl halides, and alkylating reagents. Under this protocol, one equivalent of SiCl 4 or two equivalents of Me 2 SiCl 2 results in direct conversion of the uranyl to uranium(IV) tetrachloride. Full spectroscopic and structural characterization of the siloxide products is reported.
Synthesis and Reactivity of Paramagnetic Nickel Polypyridyl Complexes Relevant to C(sp 2 )–C(sp 3 )Coupling Reactions
A number of new transition metal catalyzed methods for the formation of C(sp 2 )–C(sp 3 ) bonds have recently been described. These reactions often utilize bidentate polypyridyl-ligated Ni catalysts, and paramagnetic NiI halide or aryl species are proposed in the catalytic cycles. However, there is little knowledge about complexes of this type. Here, we report the synthesis of paramagnetic bidentate polypyridyl-ligated Ni halide and aryl complexes through elementary reactions proposed in catalytic cycles for C(sp 2 )–C(sp 3 ) bond formation. We investigate the ability of these complexes to undergo organometallic reactions that are relevant to C(sp 2 )–C(sp 3 ) coupling through stoichiometric studies and also explore their catalytic activity.
Evolution of Surface Chemistry in Two‐Dimensional MXenes: From Mixed to Tunable Uniform Terminations
Abstract Surface chemistry of MXenes is of great interest as the terminations can define the intrinsic properties of this family of materials. The diverse and tunable terminations also distinguish MXenes from many other 2D materials. Conventional fluoride‐containing reagents etching approaches resulted in MXenes with mixed fluoro‐, oxo‐, and hydroxyl surface groups. The relatively strong chemical bonding of MXenes’ surface metal atoms with oxygen and fluorine makes post‐synthetic covalent surface modifications of such MXenes unfavorable. In this minireview, we focus on the recent advances in MXenes with uniform surface terminations. Unconventional methods, including Lewis acidic molten salt etching (LAMS) and bottom‐up direct synthesis, have been proven successful in producing halide‐terminated MXenes. These synthetic strategies have opened new possibilities for MXenes because weaker surface chemical bonds in halide‐terminated MXenes facilitate post‐synthetic covalent surface modifications. Both computational and experimental results on surface termination‐dependent properties are summarized and discussed. Finally, we offer our perspective on the opportunities and challenges in this exciting research field.
CO 2 Electroreduction with Enhanced Ethylene and Ethanol Selectivity by Nanostructuring Polycrystalline Copper
Abstract There are a number of recent reports on the use of oxidation/reduction cycling of Cu surfaces to improve their selectivity for ethylene formation in the aqueous CO 2 reduction reaction. Here, the oxidation/reduction process is examined in detail. It is found that the faradaic efficiencies for both ethylene and ethanol are enhanced after oxidation/reduction cycling in the presence of halide anions. Specifically, cycling of the electrode in the presence of chloride, bromide, or fluoride anions allows for an ethylene faradaic efficiency of approximately 15.2 %, a factor of 1.5 higher than that for polycrystalline copper (at −1.0 V vs. RHE). The faradaic efficiency for ethanol is also enhanced from 2.65 to approximately 7.6 %. The effects of electrochemical oxidation/reduction with the chloride anion were investigated by using in situ Raman spectroscopy, and the changes in the surface morphology of copper were monitored by using SEM. Consistent with prior reports, it is observed that during the oxidation part of the cycle, anodic corrosion forms a Cu 2 O layer, which consists of cubical crystals of about 150 nm. During the reduction sweep, it is converted to metallic copper, which forms irregular Cu nanoparticles of around 20 nm in diameter. The enhancement in ethylene formation is presumably attributed to the formation of grain boundaries, which may serve as active sites.
Controlled Redox Chemistry at Cerium within a Tripodal Nitroxide Ligand Framework
Ligand reorganization has been shown to have a profound effect on the outcome of cerium redox chemistry. Through the use of a tethered, tripodal, trianionic nitroxide ligand, [((2-tBuNOH)C 6 H 4 CH 2 ) 3 N] 3- (TriNO x 3- ), controlled redox chemistry at cerium was accomplished, and typically reactive complexes of tetravalent cerium were isolated. These included rare cationic complexes [Ce(TriNO x )thf][BAr F 4 ], in which Ar F =3,5-(CF 3 ) 2 -C 6 H 3 , and [Ce(TriNO x )py][OTf] . A rare complete Ce-halide series, Ce(TriNO x )X, in which X=F - , Cl - , Br - , I - , was also synthesized. We explored the solution chemistry of these complexes through detailed solution-phase electrochemistry and 1 H NMR experiments and showed a unique shift in the ratio of species with inner- and outer-sphere anions with size of the anionic X - group. DFT calculations on the series of calculations corroborated the experimental findings. Also, the use of a bulky and strongly donating tethered tripodal nitroxide ligand allowed the controlled redox chemistry at cerium. As a result, rare examples of cationic Ce IV complexes were synthesized and fully characterized. The full Ce-halide series supported by the tripodal ligand framework is also reported (see scheme).
Evidence of Cu I /Cu II Redox Process by X‐ray Absorption and EPR Spectroscopy: Direct Synthesis of Dihydrofurans from β‐Ketocarbonyl Derivatives and Olefins
Abstract The Cu I /Cu II and Cu I /Cu III catalytic cycles have been subject to intense debate in the field of copper‐catalyzed oxidative coupling reactions. A mechanistic study on the Cu I /Cu II redox process, by X‐ray absorption (XAS) and electron paramagnetic resonance (EPR) spectroscopies, has elucidated the reduction mechanism of Cu II to Cu I by 1,3‐diketone and detailed investigation revealed that the halide ion is important for the reduction process. The oxidative nature of the thereby‐formed Cu I has also been studied by XAS and EPR spectroscopy. This mechanistic information is applicable to the copper‐catalyzed oxidative cyclization of β‐ketocarbonyl derivatives to dihydrofurans. This protocol provides an ideal route to highly substituted dihydrofuran rings from easily available 1,3‐dicarbonyls and olefins.