SEARCH · Engineering Papers

Results for “Ground testing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,711 records · Page 95

All sources NASA NTRS DOE OSTI

NASA NTRS1981

Vehicle concepts and technology requirements for buoyant heavy-lift systems

Several buoyant-vehicle (airship) concepts proposed for short hauls of heavy payloads are described. Numerous studies identified operating cost and payload capacity advantages relative to existing or proposed heavy-lift helicopters for such vehicles. Applications involving payloads of from 15 tons up to 800 tons were identified. The buoyant quad-rotor concept is discussed in detail, including the history of its development, current estimates of performance and economics, currently perceived technology requirements, and recent research and technology development. It is concluded that the buoyant quad-rotor, and possibly other buoyant vehicle concepts, has the potential of satisfying the market for very heavy vertical lift but that additional research and technology development are necessary. Because of uncertainties in analytical prediction methods and small-scale experimental measurements, there is a strong need for large or full-scale experiments in ground test facilities and, ultimately, with a flight research vehicle.

Ardema, M. D.↗

NASA NTRS1981

Calculation of the critical cooling rate for amorphous Pd/77.5/Si/16.5/Cu/6/

The viscosity of the molten alloy Pd(77.5)Si(16.5)Cu(6) has been determined from 744 to 1000 C using an oscillating cup viscometer. Using these data (together with other pertinent physical data available for this alloy) in existing crystallization theory indicates that it could be made amorphous at cooling rates as low as 5-10 K/sec. This analysis assumes strictly homogeneous nucleation. Containerless solidification will be one good testing ground for the results of this analysis.

Steinberg, J.↗

NASA NTRS1981

Space Construction Experiment Definition Study (SCEDS), part 1. Volume 1: Executive summary

Definition was completed on a basic flight experiment which will provide data on the construction of large space systems from the orbiter which could not be practicably obtained from ground tests. Dynamic behavior of a representative large structure was predicted. On-orbit construction operations were studied. Orbiter control during and after construction was investigated. Evolutionary or supplemental flight experiments for the development of augmentation of a basic flight experiment were identified and defined.

Source record↗

NASA NTRS1980

Meteosat spacecraft charging investigation

A number of phenomena observed on the first orbiting Meteosat satellite attributed to spacecraft charging effects are considered. Design analysis, correlation of anomalies with space environmental data, on ground tests with an engineering model spacecraft, tests on the validity of improvements, and installation of suitable monitors for the second improved flight satellite are discussed.

Hoge, D. G.↗

NASA NTRS1982

Prediction of sound radiation from different practical jet engine inlets

The computer codes necessary for this study were developed and checked against exact solutions generated by the point source method using the NASA Lewis QCSEE inlet geometry. These computer codes were used to predict the acoustic properties of the following five inlet configurations: the NASA Langley Bellmouth, the NASA Lewis JT15D-1 Ground Test Nacelle, and three finite hyperbolic inlets of 50, 70 and 90 degrees. Thirty-five computer runs were done for the NASA Langley Bellmouth. For each of these computer runs, the reflection coefficient at the duct exit plane was calculated as was the far field radiation pattern. These results are presented in both graphical and tabular form with many of the results cross plotted so that trends in the results verses cut-off ratio (wave number) and tangential mode number may be easily identified.

Zinn, B. T.↗

NASA NTRS1981

A study to define the research and technology requirements for advanced turbo/propfan transport aircraft

The feasibility of the propfan relative to the turbofan is summarized, using the Douglas DC-9 Super 80 (DS-8000) as the actual operational base aircraft. The 155 passenger economy class aircraft (31,775 lb 14,413 kg payload), cruise Mach at 0.80 at 31,000 ft (8,450 m) initial altitude, and an operational capability in 1985 was considered. Three propfan arrangements, wing mounted, conventional horizontal tail aft mounted, and aft fuselage pylon mounted are selected for comparison with the DC-9 Super 80 P&WA JT8D-209 turbofan powered aircraft. The configuration feasibility, aerodynamics, propulsion, structural loads, structural dynamics, sonic fatigue, acoustics, weight maintainability, performance, rough order of magnitude economics, and airline coordination are examined. The effects of alternate cruise Mach number, mission stage lengths, and propfan design characteristics are considered. Recommendations for further study, ground testing, and flight testing are included.

Goldsmith, I. M.↗

NASA NTRS1982

Offset wrap rib antenna concept development

The demonstration of 50 to 150 m, STS compatible, offset antenna technology readiness is reported. Fabrication of a ground and flight testable partial 55 m reflector section and feed support structure is discussed. Reduction to practice through ground test verification is presently contained in the program. Key objectives for the program include the design of a compatible feed support structure and the fabrication and testing of critical components.

Woods, A. A., Jr.↗

NASA NTRS1980

SPS technical issues

The technical issues which would either seriously impact or potentially negate the integrity of a solar power satellite program are enumerated. Issues are identified not only relating to the question of engineering feasibility, but also to the equally important areas of environmental and social acceptability and, especially, economic viability. Specific information required for resolution of the issues was developed and a planned overall approach for resolution was identified. Results of these analyses show that 60% of the technical issues can be resolved with analysis only; 10% require only ground testing for resolution; and the remaining 30% require space experiments or demonstrations for resolution. The results also show that 85% resolution of the issues may be accomplished prior to development of a protoype.

Guttman, C. H.↗

NASA NTRS1981

High performance silicon solar arrays employing advanced structures

Specific design features to reduce cell mass, lower panel operating temperatures, and improve power to mass ratios for silicon solar cell arrays in space applications are presented. Because mass constraints limit payload capacity for launch into GEO, graphite/epoxy structures combined with high performance Si cells are needed to deliver a power/mass ratio of 265 W/kg, notably for Solar Electric Propulsion systems, compared with existing level of 65 W/kg. Shallow diffusion and back surface field cell technology have raised cell efficiencies to 15%, with a back emissivity of 1.64. Structural design requirements comprise Shuttle interface compatibility, full ground test capability, low mass, and high stiffness. Three array alternatives are discussed, and the STACBEAM configuration, which consists of a triangular truss and a piston deployer with folding accomplished on simple hinges, provides 0.2 Hz stiffness and achieves the design power/mass goals.

Rockey, D. E.↗

NASA NTRS1981

A new method for hardware/software integration of strategic systems Case study for the Space Shuttle

A new method for ground testing a complex avionics system in an integrated manner has been developed. A case study for the Space Shuttle, on which the concept has been successfully implemented, is described here. This approach utilizes the actual hardware and software of the vehicle to perform a realistic simulation of its mission, verifying in the process all the critical interfaces and interactions of the software with the hardware. The advantages over current testing techniques are discussed, as well as the extension of the concept to other strategic systems.

Ionescu, T. V.↗

NASA NTRS1980

Southeastern Virginia Urban Plume Study design considerations and measurement results

The Southeastern Virginia Urban Plume Study is intended to provide a testing ground for NASA remote sensors designed for urban and regional scale monitoring of air quality phenomena. The air quality experiments it has conducted have incorporated surface, airborne, sonde and balloon platforms which measured air quality and meteorology parameters, with emphasis on photochemically produced O3 and its primary precursors upwind, above, and downwind of the Hampton Roads area urban complex. The results from three years of experiments have shown that such different meteorological conditions as blue/broken skies, high/moderate temperatures and low/high winds have a direct impact on the degree of downwind aging of the summer urban O3 airmass. In 1979, the urban plume was traced at aging times of 0.5, 1.5, and 5 hr.

Mcdougal, D. S.↗

NASA NTRS1982

Aerospace mechanical reliability practice

The impact of mechanical-reliability practice on the Saturn/Apollo launch program is considered with reference to the interrelationship of analysts and designers with management. Rocket engine development, ground testing, and launch facilities in the Saturn/Apollo program are discussed, and the Saturn reliability approach is examined in regard to management style, decision making, human error control, and reliability analyses. It is noted that the use of conservative design philosophy contributed to achieved reliability.

Fedor, O. H.↗

NASA NTRS1983

Predicting Aircraft Noise Levels

Computer program developed for predicting aircraft noise levels either in flight or in ground tests. Noise sources include fan inlet and exhaust jet flap (for powered lift), core (combustor), turbine and airframe. Program written in FORTRAN IV.

Clark, B. J.↗

NASA NTRS1982

NASA solar array flight experiment

The NASA large flexible solar array space shuttle flight experiment is described. The 32 x 4 m wing is deployed from the shuttle bay, and experiments in electrical output, multiple deployment, and structural dynamics are planned. Both 2 x 4 cm and 5.9 x 5.9 cm cell assemblies on the array blanket are evaluated. Safety/hazards provisions are described, including emergency jettison provisions. Ground testing and hardware fabrication are summarized.

Turner, G.↗

NASA NTRS1983

Cryogenic Wind Tunnel Models. Design and Fabrication

The principal motivating factor was the National Transonic Facility (NTF). Since the NTF can achieve significantly higher Reynolds numbers at transonic speeds than other wind tunnels in the world, and will therefore occupy a unique position among ground test facilities, every effort is being made to ensure that model design and fabrication technology exists to allow researchers to take advantage of this high Reynolds number capability. Since a great deal of experience in designing and fabricating cryogenic wind tunnel models does not exist, and since the experience that does exist is scattered over a number of organizations, there is a need to bring existing experience in these areas together and share it among all interested parties. Representatives from government, the airframe industry, and universities are included.

Young, C. P., Jr.↗

NASA NTRS1983

Study and simulation results for video landmark acquisition and tracking technology (Vilat-2)

The results of several investigations and hardware developments which supported new technology for Earth feature recognition and classification are described. Data analysis techniques and procedures were developed for processing the Feature Identification and Location Experiment (FILE) data. This experiment was flown in November 1981, on the second Shuttle flight and a second instrument, designed for aircraft flights, was flown over the United States in 1981. Ground tests were performed to provide the basis for designing a more advanced version (four spectral bands) of the FILE which would be capable of classifying clouds and snow (and possibly ice) as distinct features, in addition to the features classified in the Shuttle experiment (two spectral bands). The Shuttle instrument classifies water, bare land, vegetation, and clouds/snow/ice (grouped).

Lowrie, J. W.↗

NASA NTRS1982

Fiberglass composite blades for the 2 MW Mod-1 wind turbine generator

In mid-1979, NASA contracted with Kaman Aerospace Corporation for the design, manufacture, and ground testing of two 100 foot composite rotor blades intended for operation on the Mod-1 wind turbine. The Mod-1 blades have been completed and are currently stored at the Kaman facility. The design, tooling, fabrication, and testing phases which have been carried out to date, as well as testing still planned are described. Discussed are differences from the 150 foot blade which were introduced for cost and manufacturing improvement purposes. Also included is a description of the lightning protection system installed in the blades, and its development program. Actual costs and manhours expended for Blade No. 2 are provided as a base, along with a projection of costs for the blade in production. Finally, cost drivers are identified relative to future designs.

Batesole, W. R.↗

NASA NTRS1983

Design of the flutter suppression system for DAST ARW-IR

The design of the flutter suppression system for a remotely-piloted research vehicle is described. The modeling of the aeroelastic system, the methodology used to synthesized the control law, the analytical results used to evaluate the control law performance, and ground testing of the flutter suppression system onboard the aircraft are discussed. The major emphasis is on the use of optimal control techniques employed during the synthesis of the control law.

Newsom, J. R.↗