SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Volume IV of NASA Special Publication SP-32 was originally intended to contain only those papers published outside of the Bell System Technical Journal that were pertinent to the Telstar I project. However, since that time, the results of Telstar II have been reported to NASA by the Bell Telephone Laboratories. It was then decided that this report should also be included.
The Goonhilly satellite-communication aerial uses an 85-ft. diameter paraboloidal reflector with waveguide feed at the focus. The aerial is movable in azimuth and elevation, and is provided with independent feedback control systems for these two motions. During a satellite pass, the aerial must be steered so that its axis points continuously, and with high accuracy, in the direction of the satellite. Of the various possible methods of achieving this result, that based on prediction of satellite position has been adopted for the first transatlantic communication experiments using the Telstar and Relay satellites. The process by which orbital predictions originating in the USA are converted to substantially continuous real-time azimuth and elevation pointing instructions at Goonhilly is described herein.
The 85-ft. diameter aerial at Goonhilly Downs, Cornwall uses a focal-plane paraboloidal reflector illuminated from a primary feed at the focus, Circularly polarized waves are transmitted and received. For optimum gain and uniformity of the aerial radiation patterns, circular symmetry of the primary feed radiation pattern is desirable. The primary feed has therefore been made circularly symmetric.
This paper describes the CW travelling wave tube used by the Genera Post Office in their ground transmitter for Project Telstar. It operatcs in the 6000 Mc/s band with a maximum power output of about 5 kw and a bandwidth of great than 100 Mc/s. The factors influencing the design of the valve and its performance are discussed in some detail.
The power output amplifier of the transmitter for the Goonhilly project uses a travelling tube, type VX527 delivering 4 kW at 6,390 Me/s, with a bandwidth of about 100 Mc/s. This amplifier, together with its power supplies and driver stage is located in a cabin, situated on the turntable underneath the aerial. Input signals for the transmitter are received in the cabin from the main control room at a frequency of 70 Mc/s; they are converted to the to the nominal 6,390 Mc/s before being amplified to about 3 watts by the driver TWT and fed via a waveguide link to the output stage. The output stage, described below, was designed and manufactured by A.E.I. Electronic Apparatus Division, Leicester, England, during the first half of 1962.
Site manual for radar intelligence system capable of precise missile trajectory measurements
Parametric analysis methodology for determining optimum deep space communication and tracking systems, and reference data on mission analysis, optics, prime power, and ground receiver sites
Earth-based navigation for two-spacecraft missions using analytical techniques for POLYDOP TRACKING data
There are no author-identified significant results in this report. Progress in studies of the marine environment of the northern Gulf of California is described. A ship was chartered in Mexico, staffed with local seamen, equipped for oceanographic work, and is now conducting monthly cruises of 47 stations, collecting ground observations for correlation with ERTS-1 imagery in the Arizona Regional Ecological Test Site laboratory in Tucson. Progress is reported on fabrication of instrument buoys equipped with marine-adapted DCP's to transmit ground observations via satellite to Tucson. Data handling processes are described. Coordination of work with Mexican scientists is detailed.
Cloud-free imagery covering the Tucson, Ariz., region for the period from August 22 to November 2, 1972, was used to determine the utility of ERTS-1 data for discriminating boundaries between plant communities. The following studies were made from imagery analyzed by use of an Electronic Satellite Image Analysis Console: (1) console-generated color composites from MSS-5 and MSS-6 bands were recorded photographically from the console color monitor. The color photographs were then used to compare with short-term changes in vegetative cover observed on the ground; (2) using the console, microdensitometric traces were made along selected traverses to quantify changes in scene irradiance across the image field; (3) quantitative plant coverage data, collected at ground-truth stations along the traverses, were compared with the densitometric values.
This paper is a brief report on the computer program developed for the Extraterrestrial Physics Barium Ion Cloud (BIC) Project. The mathematical analysis developed for the program along with its programing characteristics are pointed out to show that this program is adaptable to similar sky target projects. Definite viewing constraints are specified so that the chosen ground tracking stations can photograph the behavior of the sky target after its release. Viewing factors include the illumination of the target by the sun, the relative elevation look angle to the target from each tracking station, the solar and lunar depression angles at each tracking station, and the total sky background brightness of the target relative to each tracking station. Numeric values are assigned to each factor through program input. The program output is flexible so that the results of the window calculations can be studied to the depth required.
The feasibility of instrumenting the inflatable passive sphere (presently used to provide upper atmosphere density measurements) with miniaturized thermistors, pressure transducers, and accelerometers was analyzed. Data from the sensors must be transmitted by an onboard telemetry system to a ground receiving station. To assure a sufficiently slow fall velocity for the sphere the additional mass of the sensor and telemetry hardware must be less than 100 grams. Other constraints that must be satisfied by the sensor and telemetry systems include the ability to withstand a 150 g launch acceleration, the ability to function in both high and low temperature and pressure environments and be sufficiently small to be packaged within the body of a 3.81 cm diameter dart. A differential transducer that will measure the difference between ambient and internal sphere pressures is recommended. The application of each type of measurement relative to its ability to monitor sphere malfunction and to provide additional meteorological data is considered.
As a result of a consortium of several industries and organizations, an economical, versatile, and stable data collection and transmission buoy has been designed, developed, and deployed to gather and transmit water quality data to a ground receiving station at three-minute intervals and to the earth resources technology satellite (ERTS) as it passes over the deployed buoy every 12 hours. The buoy system, designed for both fresh and salt water application, gathers data inclusive of temperature measurement, conductivity, relative acidity, dissolved oxygen, current speed, and direction. The mechanical design philosophy used to determine and satisfy boundary conditions involving stability, ease of deployment, servicing and maintenance, minimal manufacturing costs, and fresh and salt water installation capability is discussed. The development of peripheral handling equipment and anchoring systems is described.
Quarterly literature review compiles citations and abstracts from eight major abstracting and indexing services. Each issue contains author/keyword index. Includes data obtained or techniques used from space, aircraft, or ground-based stations.
A seven channel physiological telemetry system was designed, constructed, and tested for a space environment to transfer physiological and voice information to and from an astronaut. Three ECG leads were monitored simultaneously, and two-way voice communication was achieved. The portable unit operated properly under ground based station (GBS) control. The major design problem was associated with the constraints of a wide bandwidth FM transmitter with crystal control combined with the tri-state logic format used. However, by using an ''indirect FM'' scheme and incorporating additional waveshaping circuits at the GBS, proper operation of the system was obtained. In the present form, the telemetry system has capability for seven channels of low level (2.5 mv peak maximum) physiological signals with bandwidths between 0.03 Hz and 100 Hz. Additional signal conditioning and modification of the instrumentation amplifier gains are required for other signals.
Special International Magnetospheric Study (IMS) Satellite Periods selected at times when two or more satellites are expected to be in interesting regions of the magnetosphere simultaneously are described. Data are presented to aid in defining a program of magnetospheric observations which emphasizes coordinated measurements of satellites, rockets, balloons, aircraft, and ground-based stations. The position is given of currently operating high altitude spacecraft in the Geocentric Solar Ecliptic, Geocentric Solar Magnetospheric, and Solar Magnetic coordinate systems to determine their passage through the bow shock, the magnetopause, the cusp, or the neutral sheet region. Information on the synchronous and low altitude spacecraft and experiments are included in tabular form along with a tabular summary of all the rocket, balloon, and aircraft campaigns in 1976.
The author has identified the following significant results. The demonstration, local user terminal, has proven the hypothesis that a relatively inexpensive, automatic, and easily maintained ground receiving station for satellite relayed data is practical for an operational use.
The author has identified the following significant results. The local user terminal has proven the hypothesis that a relatively inexpensive, automatic, and easily maintained ground receive station for satellite relayed data is practical for operational use. Data acquisition activities were expanded to include both the teletype-relayed information as well as that received directly from local user terminals.