Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Function analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,711 records · Page 95

Large eddy interactions in a turbulent channel flow

The dynamic processes of large eddies in a turbulent channel flow have been examined by utilizing an orthogonal expansion of the velocity fluctuation, known in the literature as the Proper Orthogonal Decomposition Theorem. The mathematical form of these functions is unknown in contrast to the Fourier analysis. Attention is focused on the nonlinear, turbulence-turbulence interaction process in the dynamical equation for large eddies (the first term in the expansion). The nonlinear interactions of the components of the first mode are treated exactly, but influences of higher modes are modeled. This requires adjustment of both the skewness and the effective Reynolds number so that the energy equilibrium of the large eddies is ensured when the mean velocity distribution is assumed known for experiments. Computational results show that the first mode contributes significantly to turbulent intensities and possesses a structural and statistical character similar to that of the entire flow.

Hong, S. K.↗

Studies of radiative transfer in planetary atmospheres

The research emphasis during the period of this report has been on radio observations of comets, related to the International Halley Watch. Observations of the 18 cm lambda-doublet of OH have been carried out monthly. Both of the 1667 and 1665 MHz lines have been repeatedly detected for Comets Halley, Giacobini-Zinner, Thiele, and Hartley-Good. The first astronomical detection of the weak satellite line at 1720 MHz was made for P/Halley. These data promise to supply the highest signal-to-noise-ratio data over an extended period ever obtained for cometary radio observations. Analysis will provide gas production rates as a function of heliocentric distance and allow for detailed comparisons with the OH excitation model involving ultraviolet pumping. In the case of Halley, the lines appear quite symmetric, usually being centered within 0.1 km/s with respect to the nominal nuclear velocity. Line widths have been typically within 10% of 2 km/s. There is thus little evidence for asymmetric emission in the data obtained to date. It seems likely that non-steady-state models of the coma will be required to interpret the data. Evidence for significant departures from the LTE hyperfine ratios was found for Comet Giacobini-Zinner. Smaller, but nonetheless significant, deviations have been found for Comet Halley.

Irvine, W. M.↗

Excitation of the Earth's Chandler wobble by southern oscillation/El Nino, 1900-1979

The southern oscillation/El Nino (ENSO) is the single most prominent interannual signal in global atmospheric/oceanic fluctuations. The following question is addressed: how important is the angular momentum carried by ENSO in exciting the Earth's Chandler wobble? The question is attacked through a statistical analysis of the coherence spectra (correlation as a function of frequency) between two data sets spanning 1900 to 1979-the southern oscillation index (SOI) time series and the excitation function psi (with x-component psi sub x and y-component psi sub y) of the Chandler wobble derived from the homogeneous ILS (International Latitude Service) polar motion data. The coherence power and phase in the Chandler frequency band (approx. 0.79 to 0.89 cpy) are studied. It is found that, during 1900 to 1979 the coherence between SOI and psi sub x is significant well over the 95% confidence threshold whereas that between SOI and psi sub y is practically nil. Quantitatively, the coherence study shows that ENSO provides some 20% of the observed Chandler wobble excitation power. Since earlier investigations have shown that the total atmospheric/oceanic variation can account for the Chandler wobble excitation at about 20% level, the implication is that ENSO maybe an important (interannual) part of the atmospheric/oceanic variation that is responsible for the Chandler wobble excitation during 1900 to 1979.

Chao, B. F.↗

Variations of radiative heating/cooling in the stratosphere as revealed by satellite observations

Ozone observations made by Stratospheric Aerosol and Gas Experiment (SAGE) and meteorological temperature data are used to study the coupling of radiation and dynamics in the stratosphere. Both radiative heating and cooling rates are calculated using the observations as a function of altitude, longitude, latitude, and season. Fourier analysis of heating/cooling rates is performed to gain an understanding of the radiation-planetary wave interactions. High correlation is seen to exist between solar heating and the temperature distribution of the upper stratosphere. Radiative damping coefficients are derived and it is found that the coupling between ozone and temperature can produce significant variations in the damping rate which, in turn, critically depends on the vertical structure of the planetary waves.

Wang, P.-H.↗

On-Orbit System Identification

Information derived from accelerometer readings benefits important engineering and control functions. Report discusses methodology for detection, identification, and analysis of motions within space station. Techniques of vibration and rotation analyses, control theory, statistics, filter theory, and transform methods integrated to form system for generating models and model parameters that characterize total motion of complicated space station, with respect to both control-induced and random mechanical disturbances.

Mettler, E.↗

Use of a minimum rate of change formalism to quantify variability of extragalactic X-ray sources

A method to obtain rigorous, quantitative constraints on the rate of variability is suggested. The method is motivated by the case when the existence of time variability is unequivocal, but the statistical uncertainties are too large to apply more direct methods such as power spectrum analysis. Conceptually the data are fitted to a function of time and a set of free parameters. The method of Lagrange multipliers is used to solve for that parameter set which minimizes the value of the derivative at time t(m). The result can be related physically to the minimum efficiency with which rest mass must be converted to radiation energy. Slightly different formulations of the general principal are used to estimate maximum source size scales associated with the variability.

Schwartz, Daniel A.↗

Einstein Observatory survey of X-ray emission from solar-type stars - The late F and G dwarf stars

Results of a volume-limited X-ray survey of stars of luminosity classes IV and V in the spectral range F7-G9 observed with the Einstein Observatory are presented. Using survival analysis techniques, the stellar X-ray luminosity function in the 0.15-4.0 keV energy band for both single and multiple sources. It is shown that the difference in X-ray luminosity between these two classes of sources is consistent with the superposition of individual components in multiple-component systems, whose X-ray properties are similar to those of the single-component sources. The X-ray emission of the stars in our sample is well correlated with their chromospheric CA II H-K line emission and with their projected equatorial rotational velocity. Comparison of the X-ray luminosity function constructed for the sample of the dG stars of the local population with the corresponding functions derived elsewhere for the Hyades, the Pleiades, and the Orion Ic open cluster confirms that the level of X-ray emission decreases with stellar age.

Maggio, A.↗

Concepts for radically increasing the numerical convergence rate of the Euler equations

Integral equation and finite difference methods have been developed for solving transonic flow problems using linearized forms of the transonic small disturbance and Euler equations. A key element is the use of a strained coordinate system in which the shock remains fixed. Additional criteria are developed to determine the free parameters in the coordinate straining; these free parameters are functions of the shock location. An integral equation analysis showed that the shock is located by ensuring that no expansion shocks exist in the solution. The expansion shock appears as oscillations in the solution near the sonic line, and the correct shock location is determined by removing these oscillations. A second objective was to study the ability of the Euler equation to model separated flow.

Nixon, David↗

VSAERO analysis of tip planforms for the free-tip rotor

The results of a numerical analysis of two interacting lifting surfaces separated in the spanwise direction by a narrow gap are presented. The configuration consists of a semispan wing with the last 32 percent of the span structurally separated from the inboard section. The angle of attack of the outboard section is set independently from that of the inboard section. In the present study, the three-dimensional panel code VSAERO is used to perform the analysis. Computed values of tip surface lift and pitching moment coefficients are correlated with experimental data to determine the proper approach to model the gap region between the surfaces. Pitching moment data for various tip planforms are also presented to show how the variation of tip pitching moment with angle of attack may be increased easily in incompressible flow. Calculated three-dimensional characteristics in compressible flow at Mach numbers of 0.5 and 0.7 are presented for new tip planform designs. An analysis of sectional aerodynamic center shift as a function of Mach number is also included for a representative tip planform. It is also shown that the induced drag of the tip surface is reduced for negative incidence angles relative to the inboard section. The results indicate that this local drag reduction overcomes the associated increase in wing induced drag at high wing lift coefficients.

Martin, D. M.↗

Effect of alloy composition on the sodium-sulfate induced hot corrosion attack of cast nickel-base superalloys at 900 C

The effects of Cr, Al, Ti, Mo, Ta, Nb, and W content on the hot corrosion of Ni-base alloys were examined experimentally. The superalloys were tested for 300 1-hr cycles at 900 C in a Mach 0.3 burner rig flame containing 0.5 ppmw sodium. The data reveal that the best corrosion resistance is obtained when the Cr content is greater than 12 percent; however, good resistance is detected in some alloys with Cr content less than 10 percent provided that the Al content is less than 2.5 wt pct and the Ti content is less than 4 wt pct. It is observed that the influence of W, Ta, Mo, and Nb content on resistance is dependent on Al and Ti contents. The derivation of an equation for estimating hot corrosion attack as a function of alloy composition using multiple linear regression analysis is described. The applicability of the equation is tested using various data sets of alloys. It is noted that the equation can be used to explain the effects of alloy composition on attack rates.

Stearns, C. A.↗

The Sizing and Optimization Language (SOL): A computer language to improve the user/optimizer interface

The nonlinear mathematical programming method (formal optimization) has had many applications in engineering design. A figure illustrates the use of optimization techniques in the design process. The design process begins with the design problem, such as the classic example of the two-bar truss designed for minimum weight as seen in the leftmost part of the figure. If formal optimization is to be applied, the design problem must be recast in the form of an optimization problem consisting of an objective function, design variables, and constraint function relations. The middle part of the figure shows the two-bar truss design posed as an optimization problem. The total truss weight is the objective function, the tube diameter and truss height are design variables, with stress and Euler buckling considered as constraint function relations. Lastly, the designer develops or obtains analysis software containing a mathematical model of the object being optimized, and then interfaces the analysis routine with existing optimization software such as CONMIN, ADS, or NPSOL. This final state of software development can be both tedious and error-prone. The Sizing and Optimization Language (SOL), a special-purpose computer language whose goal is to make the software implementation phase of optimum design easier and less error-prone, is presented.

Lucas, S. H.↗

General approach and scope

This paper describes a joint activity involving NASA and Army researchers at the NASA Langley Research Center to develop optimization procedures aimed at improving the rotor blade design process by integrating appropriate disciplines and accounting for all of the important interactions among the disciplines. The disciplines involved include rotor aerodynamics, rotor dynamics, rotor structures, airframe dynamics, and acoustics. The work is focused on combining these five key disciplines in an optimization procedure capable of designing a rotor system to satisfy multidisciplinary design requirements. Fundamental to the plan is a three-phased approach. In phase 1, the disciplines of blade dynamics, blade aerodynamics, and blade structure will be closely coupled, while acoustics and airframe dynamics will be decoupled and be accounted for as effective constraints on the design for the first three disciplines. In phase 2, acoustics is to be integrated with the first three disciplines. Finally, in phase 3, airframe dynamics will be fully integrated with the other four disciplines. This paper deals with details of the phase 1 approach and includes details of the optimization formulation, design variables, constraints, and objective function, as well as details of discipline interactions, analysis methods, and methods for validating the procedure.

Adelman, Howard M.↗

Antennas for 20/30 GHz and beyond

Antennas of 20/30 GHz and higher frequency, due to the small wavelength, offer capabilities for many space applications. With the government-sponsored space programs (such as ACTS) in recent years, the industry has gone through the learning curve of designing and developing high-performance, multi-function antennas in this frequency range. Design and analysis tools (such as the computer modelling used in feedhorn design and reflector surface and thermal distortion analysis) are available. The components/devices (such as BFN's, weight modules, feedhorns and etc.) are space-qualified. The manufacturing procedures (such as reflector surface control) are refined to meet the stringent tolerance accompanying high frequencies. The integration and testing facilities (such as Near-Field range) also advance to facilitate precision assembling and performance verification. These capabilities, essential to the successful design and development of high-frequency spaceborne antennas, shall find more space applications (such as ESGP) than just communications.

Chen, C. Harry↗

Space Station Environmental Health System water quality monitoring

One of the unique aspects of the Space Station is that it will be a totally encapsulated environment and the air and water supplies will be reclaimed for reuse. The Environmental Health System, a subsystem of CHeCS (Crew Health Care System), must monitor the air and water on board the Space Station Freedom to verify that the quality is adequate for crew safety. Specifically, the Water Quality Subsystem will analyze the potable and hygiene water supplies regularly for organic, inorganic, particulate, and microbial contamination. The equipment selected to perform these analyses will be commercially available instruments which will be converted for use on board the Space Station Freedom. Therefore, the commercial hardware will be analyzed to identify the gravity dependent functions and modified to eliminate them. The selection, analysis, and conversion of the off-the-shelf equipment for monitoring the Space Station reclaimed water creates a challenging project for the Water Quality engineers and scientists.

Vincze, Johanna E.↗

Photometry of the 4686 A emission line of gamma(2) Velorum from the South Pole

An automated optical telescope located at the Amundsen-Scott South Pole station on Antarctica, has been used to obtain more than 78 h of photometry of the He II emission line (4686 A) of the spectroscopic binary gamma(2) Velorum. These data were obtained on seven different days during the 1987 austral winter; the longest continuous run spans 19 h. Two independent period search techniques have been used to search for periodic behavior in the strength of the He II emission line of this Wolf-Rayet star. They are: (1) power spectrum analysis and (2) a first-order sine function fit to the data using least squares. Various multiplicities of a period on the order of 1.3 h with amplitudes of a few percent are found in most of these data. According to recent theoretical models of Wolf-Rayet stars, fluctuations in the He II emission line may indicate vibrational instability in gamma(2) Vel. These pulsations may, in turn, give rise to shocks which propagate outward and which may provide the necessary conditions for periodic changes in the state of a given region of the atmosphere to occur.

Taylor, Maryjane↗

IDE spatio-temporal impact fluxes and high time-resolution studies of multi-impact events and long-lived debris clouds

During the first 12 months of the Long Duration Exposure Facility (LDEF) mission, the Interplanetary Dust Experiment (IDE) recorded over 15,000 total impacts on six orthogonal faces with a time resolution on the order of 15 to 20 seconds. When combined with the orbital data and the stabilized configuration of the spacecraft, this permits a detailed analysis of the micro-particulate environment. The functional status of each of the 459 detectors was monitored every 2.4 hours, and post-flight analyses of these data has now permitted an evaluation of the effective active detection area as a function of time, panel by panel and separately for the two sensitivity levels. Thus, total impacts were transformed into areal fluxes, and are presented here for the first time. Also discussed are possible effects of these fluxes on previously announced results: apparent debris events, meteor stream detections, and beta meteoroids in observationally significant numbers.

Mulholland, J. Derral↗

Control of a small working robot on a large flexible manipulator for suppressing vibrations: Development of a robust control law for flexible robot and it's stability analysis

Researchers developed a robust control law for slow motions for the accurate trajectory control of a flexible robot. The control law does not need larger velocity gains than position gains, which some researchers need to ensure the stability of a rigid robot. Initial experimentation for the Small Articulated Manipulator (SAM) shows that control laws that use smaller velocity gains are more robust to signal noise than the control laws that use larger velocity gains. Researchers analyzed the stability of the composite control law, the robust control for the slow motion, and the strain rate feedback for the fast control. The stability analysis was done by using a quadratic Liapunov function. Researchers found that the flexible motion of links could be controlled by relating the input force to the flexible signals which are sensed at the near tip of each link. The signals are contaminated by the time delayed input force. However, the effect of the time delayed input force can be reduced by giving a certain configuration to the SAM.

Soo, Han Lee↗

Approximate Solutions Of Equations Of Steady Diffusion

Rigorous analysis yields reliable criteria for "best-fit" functions. Improved "curve-fitting" method yields approximate solutions to differential equations of steady-state diffusion. Method applies to problems in which rates of diffusion depend linearly or nonlinearly on concentrations of diffusants, approximate solutions analytic or numerical, and boundary conditions of Dirichlet type, of Neumann type, or mixture of both types. Applied to equations for diffusion of charge carriers in semiconductors in which mobilities and lifetimes of charge carriers depend on concentrations.

Edmonds, Larry D.↗