Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FREQUENCY DEPENDENCE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,711 records · Page 95

Electrical properties and conduction mechanism study by OLPT model of NaZnPO4 compound

Highlights: • The crystal structure was resolved using Fullproof program. • The conduction in NaZn PO{sub 4} is insured by OLPT model. • Ac conductivity of NaZn PO{sub 4} compound obeys the Joncher’s law. - Abstract: A polycrystalline sample with NaZnPO{sub 4} stoichiometry was synthesized by the conventional solid-state reaction and then identified and characterized by X-ray powder diffraction, Raman spectroscopy and impedance spectroscopy. The X-ray diffraction pattern revealed that the composite represents a single phase that crystallizes in the monoclinic system with a P2{sub 1}/n space group. All vibration modes of tetrahedral PO{sub 4} appeared in the Raman spectrum. Besides, the electrical conductivity behavior of the title compound was analysed as a function of frequency ranging from 209 Hz to 1 MHz and at a temperature interval ranging from 578 K to 728 K by means of impedance spectroscopy to elucidate the conduction mechanism in this compound. The temperature dependence of frequency exponent ′s′ showed that the conduction in NaZnPO{sub 4} is insured by the overlapping large polaron tunneling (OLPT) model. A correlation between electrical and structural properties was also depicted.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Speed-dependent collision effects on radar back-scattering from the ionosphere

A computer code to accurately compute the fluctuation spectrum for linearly speed dependent collision frequencies was developed. The effect of ignoring the speed dependence on the estimates of ionospheric parameters was determined. It is shown that disagreements between the rocket and the incoherent scatter estimates could be partially resolved if the correct speed dependence of the i-n collision frequency is not ignored. This problem is also relevant to the study of ionospheric irregularities in the auroral E-region and their effects on the radio communication with satellites.

Theimer, O.↗

Geometric dependence of radio-frequency breakdown in normal conducting accelerating structures

We present the experimental results of a systematic study of rf breakdown phenomenon in high vacuum accelerator structures. In this study, the surface processing, geometry, and materials of the structures have been varied, one parameter at a time. The breakdown rate or alternatively, the probability of breakdown/pulse/meter has been recorded for different operating parameters. These statistical data reveal a strong dependence of breakdown probability on surface magnetic field, or alternatively on surface pulsed heating. This is in contrast to the classical view of electric field dependence. We will present our experimental methodology and results showing this remarkable correlation.

43 PARTICLE ACCELERATORS↗

Microwave antenna temperature of the earth from geostationary orbit

The microwave antenna temperature of the earth has been computed for the case of a communication satellite antenna viewing the earth from geostationary orbit. An earth-coverage beam is assumed and detailed computations are performed to account for varying land-ocean fractions within the field of view. Emission characteristics of the earth's atmosphere and surface are used with an accurate radiative transfer program to compute observed brightness temperatures. Values of 250 to 290 K commonly used for antenna temperature in satellite communication noise calculations are found to be over-conservative estimates, with more realistic values lying in the 60-240 K range depending on frequency and subsatellite longitude. These values also depend on assumptions concerning antenna beam coverage. Variations in atmospheric and surface conditions, and variations in antenna beam shape (as distinct from coverage), affect the computed results by less than about 10 K.

Njoku, E. G.↗

Experimental and Theoretical Study of Azimuth Angle and Polarization Dependences of Sum-Frequency-Generation Vibrational Spectral Features of Uniaxially Aligned Cellulose Crystals

Comprehensive interpretation of vibrational sum-frequency-generation (SFG) spectroscopic features of SFG-active nanodomains interspersed in amorphous bulk requires the knowledge of nonlinear susceptibility, χ ijk (2) , of the SFG-active phase as a function of its spatial arrangement in the bulk as well as the polarizations of the probe lights. Our work reports the full analysis of the azimuth angle and polarization dependence of SFG signals from a control sample consisting of uniaxially aligned cellulose Iβ crystals. The χ ijk (2) terms of cellulose were estimated from quantum mechanics calculations using time-dependent density functional theory (TD-DFT), and a simple structural model was built with truncated glucose dimers. The theoretical azimuth angle and polarization dependences of characteristic CH/CH 2 and OH stretch modes of cellulose were compared with the experimentally observed trends. These comparisons revealed that the relative polarity of crystallites within the SFG coherence length, the random quasi phase-matching of polycrystalline domains, and the preferential packing of crystallites in the bulk play important roles governing the spectral features. Compared to that of small molecules, the difference between chiral and achiral responses in SFG spectra is more difficult to confirm because of the inhomogeneous distribution of crystallites in the bulk sample.

59 BASIC BIOLOGICAL SCIENCES↗

Beam-loaded frequency shift study in an over-sized backward wave oscillator

The oversized backward wave oscillator (BWO) can significantly decreases the internal rf electric field in the device. The beam-loaded effect is obvious in such devices and its performance is also significantly affected. Based on the characteristics of the oversized BWO, a self-consistent equation is developed to study its beam-loaded frequency shift together with particle in cell (PIC) simulations. The mechanism whereby the output rf frequency is affected by the beam's parameters and the device's structure is theoretically studied. The frequency's dependence on the drift tube length between the reflector and SWS (slow wave structures) in the device is deduced in the paper and the theoretical results agree with those obtained in PIC simulations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

PULSE AMPLITUDE DEPENDS ON kHz QPO FREQUENCY IN THE ACCRETING MILLISECOND PULSAR SAX J1808.4-3658

We study the relation between the 300-700 Hz upper kHz quasi-periodic oscillation (QPO) and the 401 Hz coherent pulsations across all outbursts of the accreting millisecond X-ray pulsar SAX J1808.4-3658 observed with the Rossi X-ray Timing Explorer. We find that the pulse amplitude systematically changes by a factor of ∼2 when the upper kHz QPO frequency passes through 401 Hz: it halves when the QPO moves to above the spin frequency and doubles again on the way back. This establishes for the first time the existence of a direct effect of kHz QPOs on the millisecond pulsations and provides a new clue to the origin of the upper kHz QPO. We discuss several scenarios and conclude that while more complex explanations can not formally be excluded, our result strongly suggests that the QPO is produced by azimuthal motion at the inner edge of the accretion disk, most likely orbital motion. Depending on whether this azimuthal motion is faster or slower than the spin, the plasma then interacts differently with the neutron-star magnetic field. The most straightforward interpretation involves magnetospheric centrifugal inhibition of the accretion flow that sets in when the upper kHz QPO becomes slower than the spin.

79 ASTRONOMY AND ASTROPHYSICS↗

On the effect of pulsating flow on surge margin of small centrifugal compressors for automotive engines

Surge is becoming a limiting factor in the design of boosting systems of downsized diesel engines. Although standard compressor flowcharts are used for the selection of those machines for a given application, on-engine conditions widely differ from steady flow conditions, thus affecting compressor behaviour and consequently surge phenomenon. In this paper the effect of pulsating flow is investigated by means of a steady gas-stand that has been modified to produce engine-like pulsating flow. The effect of pressure pulses' amplitude and frequency on the compressor surge line location has been checked. Results show that pulsating flow in the 40-67 Hz range (corresponding to characteristic pulsation when boosting an internal combustion engine) increases surge margin. This increased margin is similar for all the tested frequencies but depends on pulsation amplitude. In a further step, a non-steady compressor model is used for modelling the tests, thus allowing a deeper analysis of the involved phenomena. Model results widely agree with experimental results. (author)

33 ADVANCED PROPULSION SYSTEMS↗

Driving-laser wavelength dependence of high-order harmonic generation in H{sub 2}{sup +} molecules

The electron-nuclear dynamics of one-dimensional H{sub 2}{sup +} molecular high harmonic generation is investigated by numerical integration of the non-Born-Oppenheimer time-dependent Schroedinger equation. It is found that the nuclear motion and electron ionization are more significant for the longer wavelength and the stronger intensity of the driving laser pulse. When the ground-state H{sub 2}{sup +} molecule is driven by a short laser pulse (ten optical cycles in the calculations), a strong signature of nuclear motion is seen in the wavelength scaling (800-2000 nm) of harmonic yield, following a {lambda}{sup -(7-8)} scaling law at a constant laser intensity. It is attributed to the fast ground-state depletion induced by the strong nuclear motion, when using the long wavelength. Consequently, the wavelength scaling gives an insight into the nuclear dynamics.

74 ATOMIC AND MOLECULAR PHYSICS↗

Relationships between nonlinear normal modes and response to random inputs

The ability to model nonlinear structures subject to random excitation is of key importance in designing hypersonic aircraft and other advanced aerospace vehicles. When a structure is linear, superposition can be used to construct its response to a known spectrum in terms of its linear modes. Superposition does not hold for a nonlinear system, but several works have shown that a system's dynamics can still be understood qualitatively in terms of its nonlinear normal modes (NNMs). Here, this work investigates the connection between a structure's undamped nonlinear normal modes and the spectrum of its response to high amplitude random forcing. Two examples are investigated: a spring-mass system and a clamped-clamped beam modeled within a geometrically nonlinear finite element package. In both cases, an intimate connection is observed between the smeared peaks in the response spectrum and the frequency-energy dependence of the nonlinear normal modes. In order to understand the role of coupling between the underlying linear modes, reduced order models with and without modal coupling terms are used to separate the effect of each NNM's backbone from the nonlinear couplings that give rise to internal resonances. In the cases shown here, uncoupled, single-degree-of-freedom nonlinear models are found to predict major features in the response with reasonable accuracy; a highly inexpensive approximation such as this could be useful in design and optimization studies. More importantly, the results show that a reduced order model can be expected to give accurate results only if it is also capable of accurately predicting the frequency-energy dependence of the nonlinear modes that are excited.

42 ENGINEERING↗

Evolutionary period changes in the rapidly oscillating Ap stars

Preliminary computations of the asymptotic p-mode frequency spacings, and their time derivatives, are presented for a grid of evolutionary models of the rapidly oscillating Ap ('roAp') stars. It is shown how the frequency spacings depend on stellar mass, metallicity, and evolutionary stage. The frequency spacings observed in two of the roAp stars indicate that they either are main-sequence objects or have evolved off of the main sequence, depending on how the pulsation spectrum is interpreted. A way to remove this ambiguity is suggested: secular evolutionary changes in the pulsation frequencies may be measurable if the roAp stars have evolved off of the main sequence. In principle, this determination may be made for the roAp star HR 1217 with existing data.

Heller, Clayton H.↗

The sensitivity of nonradial p mode eigenfrequencies to solar envelope structure

Eigenfrequencies are calculated for nonradial p mode oscillations in the sun. These frequencies are shown to depend on the adiabat of the solar convective envelope. The frequency dependence is greatest for the p2 and p3 modes described by spherical harmonics with l = 500 to 1000. The solar envelope model includes a realistic representation of the chromosphere out to the base of the corona. For the chromospheric model of Vernazza, Avrett, and Loeser (1976) chromospheric modes with a distinct locus of eigenfrequencies exist near an eigenfrequency of 0.026 Hz. The actual frequencies of these eigenmodes depend on the thickness of the chromosphere. Because of the difference in the dependence of eigenfrequency on l for the chromospheric modes as compared with the p modes, the two types of mode can be distinguished observationally. If detected, the chromospheric modes would provide a good way of determining the thickness of the chromosphere.

Ulrich, R. K.↗

Influence of the electron-phonon interaction on the temperature dependence of the phonon mode frequency in the II-VI compound solid solutions

We present an experimental investigation of the temperature dependence of the TO-phonon mode frequencies for the HgTe-based II-VI semiconductor solid solutions. In the case of the ternary Hg{sub 0.9}Zn{sub 0.1}Te solid solution was shown a discontinuity in the temperature dependence of the HgTe-like T{sub 0}-mode and of the ZnTe-like T{sub 1}-mode, similar to the Hg{sub 0.85}Cd{sub 0.15}Te system [Sheregii et al., Phys. Rev. Lett. 102, 045504 (2009)]. A generalization of the theoretical temperature shift of the phonon mode frequency as analytic equation is derived that includes both the anharmonic contribution and the electron-phonon e-p interaction which in this case is returnable—the electron subsystem effect on the phonon one. Data show that our equation satisfactorily describes the temperature shift of both Hg{sub 0.85}Cd{sub 0.15}Te and Hg{sub 0.90}Zn{sub 0.10}Te containing Dirac point (E{sub g} ≡ Γ{sub 6} – Γ{sub 8} = 0) although one of the two constants describing the anharmonic shift of the HgTe-like mode should be positive what is abnormal too. In the case of the Hg{sub 0.80}Cd{sub 0.20}Te and Hg{sub 0.763}Zn{sub 0.237}Te solid solution, the role of the returnable e-p contribution is negligible but a positive temperature shift for the HgTe-like modes occurs. This result does not allow to explain the positive temperature shift of these modes merely by the contribution of the (e-p) interaction. Indeed, the relativistic contribution to the chemical bonds induces an abnormal temperature shift of the electron states in Hg-based semiconductors—the effect is expected since the Hg d spin-orbit split contribution to chemical bonds may lead to an abnormal temperature shift of the HgTe-like modes.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electrical transport behavior of nonstoichiometric magnesium-zinc ferrite

This paper presents the direct current conductivity, alternate current conductivity and dielectric properties of nonstoichiometric magnesium-zinc ferrite below room temperature. The frequency exponent (s) of conductivity shows an anomalous temperature dependency. The magnitude of the temperature exponent (n) of dielectric permittivity strongly depends on frequency and its value decreases with increasing frequency. The grain boundary contribution is dominating over the grain contribution in conduction process and the temperature dependence of resistance due to grain and grain boundary contribution exhibits two activation regions. The ferrite shows positive alternating current magnetoconductivity. The solid state processing technique was used for the preparation of nanocrystalline ferrite powder from oxides of magnesium, zinc and iron. The X-ray diffraction methods were used in determining the structure and composition of obtained ferrite, while multimeter, impedance analyzer, liquid nitrogen cryostat and electromagnet were used in the study of conducting and dielectric properties of ferrite.

36 MATERIALS SCIENCE↗

Dependence of the residual surface resistance of superconducting radio frequency cavities on the cooling dynamics around T{sub c}

We report a strong effect of the cooling dynamics through T{sub c} on the amount of trapped external magnetic flux in superconducting niobium cavities. The effect is similar for fine grain and single crystal niobium and all surface treatments including electropolishing with and without 120 °C baking and nitrogen doping. Direct magnetic field measurements on the cavity walls show that the effect stems from changes in the flux trapping efficiency: slow cooling leads to almost complete flux trapping and higher residual resistance, while fast cooling leads to the much more efficient flux expulsion and lower residual resistance.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗