Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FOSSIL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,711 records · Page 95

The Effect of CO 2 Pressure on Chromia Scale Microstructure at 750°C

To understand and model performance in supercritical CO 2 (sCO 2 ) for high-efficiency, concentrating solar power (CSP) and fossil energy power cycles, reaction rates are compared at 750°C in 0.1 MPa CO 2 and 30 MPa sCO 2 as well as laboratory air as a baseline on structural materials such as Ni-based alloy 625. Due to the thin reaction products formed even after 5000 h, scanning transmission electron microscopy was used to study the Cr-rich surface oxide scale. The scales formed in CO 2 and sCO 2 had a much finer grain size with more voids observed in CO 2 . However, the observations on alloy 625 were complicated by Mo and Nb-rich precipitates in the adjacent substrate and Al internal oxidation. To simplify the system, a binary Ni-22Cr alloy was exposed for 1000 h in similar environments. After exposure in sCO 2 , there was an indication of carbon segregation detected on the Cr 2 O 3 grain boundaries. After exposure in air, metallic Ni precipitates were observed in the scale that were not observed in the scale formed on alloy 625. The scale formed in air on a second Ni-22Cr model alloy with Mn and Si additions did not contain Ni precipitates, suggesting caution when drawing conclusions from model alloys.

36 MATERIALS SCIENCE↗

Use of Confocal Microscope for Environmental Tensile Mechanical Testing

Mechanical testing in environmental chambers is typically limited to 450°C. Some specialty chambers have been designed but at a high cost. Furthermore, accurate extensometers in environmental chambers are rare and expensive to operate. A unique solution investigated in this manuscript is the mating of a confocal laser scanning microscope with a sealed environmental chamber fitted with loading clevises for mechanical testing. Such a setup allows the researcher to measure strain data at elevated temperatures in controlled environments. Utilizing a laser light source avoids problems with blackbody radiation at elevated temperatures. Setup and accuracy of the microscope are discussed concerning tensile loading. P91 boiler steel was selected for this work because of the long history of the alloy in the fossil energy industry. Optical strain uncertainty was measured between 1.6% and 3.5%. Here, other tensile parameters were satisfactorily measured within the experimental error of larger standard specimens.

36 MATERIALS SCIENCE↗

Creep Behavior and Phase Equilibria in Model Precipitate Strengthened Alumina-Forming Austenitic Alloys

Abstract Creep-rupture behavior and microstructural response in alumina-forming austenitic (AFA) alloys with two different precipitation strengthening mechanisms, “Laves-phase + M 23 C 6 carbide” and “coherent L1 2 γ′-Ni 3 (Al,Ti),” were explored as “model” cases of multi-phase, multi-scale heat-resistant AFA alloys for 650–750°C use. These alloys will be used to guide and verify computational alloy design and life-prediction modeling under an on-going eXtremeMAT project through the Office of Fossil Energy and Carbon Management, US Department of Energy. Computational thermodynamics were used to design and predict the amounts of strengthening and deteriorating secondary phases at 750°C. Creep-rupture lives of the alloys tested at 750°C and 100 MPa were in a range of 4000–9000 h, and the microstructure at the gage/grip after creep-rupture testing was compared with isothermally aged alloys for 1500 h, as well as the calculated phases. Detailed microstructure characterization includes phase identification, volume fraction measurement, and compositional analysis, which were correlated with the creep-rupture properties. High-temperature oxidation resistance was also screened and compared with commercial, chromia-forming heat-resistant steels. These model alloys also provide the basis for further design and optimization of next generation AFA alloys with improved creep resistance.

36 MATERIALS SCIENCE↗

Computational Design of Alloys for Energy Technologies

Advanced materials that maintain their mechanical performance under elevated temperatures, corrosive environments, and a range of static and evolving stresses are needed to improve the efficiency and reduce the environmental impact of a wide spectrum of energy technologies. For instance, cost-efficient alloys that can withstand high temperatures (e.g., 700 °C) have a critical role in improving the efficiency and economics of power generation to support decarbonization of the energy sector; such is true of both the nuclear and fossil energy sectors. Considering both the threats of the energy crisis, namely soaring costs of greenhouse gas emission-producing energy and climate change, it is essential to increase the pace of material discovery and enable rapid paths for material qualification to advance clean energy technologies. Conventionally, alloy development has followed a slow Edisonian process that uses repeated cycles of making, characterizing, and modifying to arrive at optimum composition and processing conditions to achieve the desired component performance. This optimization is followed by the necessary stepwise materials qualification. Furthermore, the increasing adoption of sound data management and physics-informed machine learning represents the next step in the acceleration of materials design and development. In the integrated computational materials engineering (ICME) approach, computational modeling and simulation data from different length and time scales can be combined with complex microstructural details from multimodal experimental characterization and selective property testing to close the design loop for rapid alloy development.

Computational Design Of Materials↗

Techno-economic and Life Cycle Analysis of MixAlco® Processes for Mixed Alcohol Production from Brown Algae

The need for producing renewable fuels from biomass has increased due to depleting fossil resources and environmental concerns. However, the low fraction of biomass carbon converted to product is an undeniable drawback for most current biofuel productions from fermentation due to undecomposed lignin in biomass composition and carbon loss as CO 2 . In this work, two main production routes of the MixAlco® process, the ketonization route (KR) and esterification route (ER) are evaluated for the mixed alcohol production by brown algae, a third-generation biomass without lignin. A novel fermentation process using syntrophic bacteria consortia (SBC) is developed to produce acetic acid from waste gas produced by KR and ER process. The paper investigates the integrated flowsheet for these alternative routes, using techno-economic and life cycle analysis to compare the minimum selling price and environmental impacts. From TEA, we find that the overall costs for KR and ER are lower than the SBC processes. The cost of ketonization routes is lower than esterification routes. The capital cost and operating cost for the ER+SBC process are the highest. Raw materials and utilities are the two major costs for all the processing routes examined. Here, the MSP for the ER+SBC process is the lowest out of all four routes. ER process performs the best in terms of environmental impacts except in water depletion compared with other processes, while the KR process performs the worst regarding the environmental metrics.

59 BASIC BIOLOGICAL SCIENCES↗

Miscanthus × giganteus Responses to Nitrogen Fertilization and Harvest Timing in Illinois, USA

Renewable energy continues to be of interest in the USA due to concerns about the long-termed availability and the environmental impact of fossil fuels. Miscanthus × giganteus is a warm-season perennial bioenergy feedstock grass that has a long growing season, is high yielding, requires limited inputs, and will likely become an important renewable energy crop in the USA. This research studied the effects of N application rates and harvest timings on yields and biomass quality of a 4-year-old stand of M. × giganteus in Urbana, IL, USA. Plots received 0, 56, 112, 156, or 224 kg N ha –1 , and harvests were conducted at five dates between August and March in the 2009, 2010, and 2011 growing seasons. Miscanthus × giganteus production increased with N applications up to 112 kg ha –1 . Harvesting biomass before senescence, August through November, produced significantly more biomass compared to harvesting biomass after senescence. However, early harvest reduced biomass yields in the following years. Here, nitrogen fertilization compensated for the yield losses, but the yield gap between early and late harvest continually increased. Harvesting M. × giganteus after senescence optimized long-term productivity, reduced the need for N fertilization, and increased carbon and ash content in the harvested biomass, while harvesting before senescence not only removes N from the plant but also reduces remobilization of other nutrients and carbohydrates in autumn.

09 BIOMASS FUELS↗

Finding Promising Candidates for Wet Growing Conditions: The Effect of Two Row Spacings on Biomass Production of Four Bioenergy Prairie Cordgrass Populations in a Wet Marginal Land

Demand for energy and the environmental consequences associated with fossil fuel emissions has created a need for alternative energy sources. To avoid conflict over the conversion of existing agricultural land from food production to fuel production, bioenergy crops could instead be cultivated on marginal land. Here, this study compared the performances, biomass yield, tiller density, and lignocellulosic bioenergy feedstock composition of four prairie cordgrass populations with two-row spacings cultivated on a waterlog-prone marginal land, as well as three other bioenergy candidate crops used as controls: big bluestem, M. × giganteus , and switchgrass. Across all populations and spacings, annual biomass yield of prairie cordgrass was 13 Mg ha −1 . Row spacing had significant impacts on prairie cordgrass productivity, with higher biomass yields observed in the 45 cm spacing than in the 90 cm spacing. Feedstock composition (cellulose, hemicellulose, ADL, and ash concentration) was not influenced by row spacing and did not deviate from expected values for growth on agricultural lands. However, biomass yields of the control species M . × giganteus and switchgrass planted in 45 cm spacing were higher than the prairie cordgrass. Our results provide evidence that prairie cordgrass could be a good energy crop with comparable biomass yield production to the energy crops M . × giganteus and switchgrass on waterlogged marginal land.

Bioenergy crops↗

3D printing of metal-based materials for renewable energy applications

Large-scale renewable energy must overcome conversion and storage challenges before it can replace fossil fuels due to its intermittent nature. However, current sustainable energy devices still suffer from high cost, low efficiency, and poor service life problems. Recently, porous metal-based materials have been widely used as desirable cross-functional platforms for electrochemical and photochemical energy systems for their unique electrical conductivity, catalytic activity, and chemical stability. To tailor the porosity length scale, ordering, and compositions, 3D printing has been applied as a disruptive manufacturing revolution to create complex architected components by directly joining sequential layers into designed structures. In conclusion, this article intends to summarize cutting-edge advances of metal-based materials for renewable energy devices (e.g., fuel cells, solar cells, supercapacitors, and batteries) over the past decade.

36 MATERIALS SCIENCE↗

Storages Are Not Forever

Not unlike the concern over diminishing fossil fuel, information technology is bringing its own share of future worries. Here, we chose to look closely into one concern in this paper, namely the limited amount of data storage. By a simple extrapolatory analysis, it is shown that we are on the way to exhaust our storage capacity in less than two centuries with current technology and no recycling. This can be taken as a note of caution to expand research initiative in several directions: firstly, bringing forth innovative data analysis techniques to represent, learn, and aggregate useful knowledge while filtering out noise from data; secondly, tap onto the interplay between storage and computing to minimize storage allocation; thirdly, explore ingenious solutions to expand storage capacity. Throughout this paper, we delve deeper into the state-of-the-art research and also put forth novel propositions in all of the abovementioned directions, including space- and time-efficient data representation, intelligent data aggregation, in-memory computing, extra-terrestrial storage, and data curation. The main aim of this paper is to raise awareness on the storage limitation we are about to face if current technology is adopted and the storage utilization growth rate persists. In the manuscript, we propose some storage solutions and a better utilization of storage capacity through a global DIKW hierarchy.

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗

Special issue: Application of biotechnology for biofuels: transforming biomass to biofuels

Rising energy prices and depleting reserves of fossil fuels continue to renew interest in the conversion of biomass to biofuels production. Biofuels derived from renewable feedstocks are environmentally friendly fuels and have the potential to meet more than a quarter of world demand for transportation fuels by 2050. Moreover, biofuels are expected to reduce reliance on imported petroleum, reduce greenhouse gas emissions, and stimulate regional economies by creating jobs and increasing demand and prices for bioproducts.

09 BIOMASS FUELS↗

Solar to fuels conversion technologies: a perspective

To meet increasing energy needs, while limiting greenhouse gas emissions over the coming decades, power capacity on a large scale will need to be provided from renewable sources, with solar expected to play a central role. While the focus to date has been on electricity generation via photovoltaic (PV) cells, electricity production currently accounts for only about one-third of total primary energy consumption. As a consequence, solar-to-fuel conversion will need to play an increasingly important role and, thereby, satisfy the need to replace high energy density fossil fuels with cleaner alternatives that remain easy to transport and store. The solar refinery concept, in which captured solar radiation provides energy in the form of heat, electricity or photons, used to convert the basic chemical feedstocks CO 2 and H 2 O into fuels, is reviewed as are the key conversion processes based on (1) combined PV and electrolysis, (2) photoelectrochemically driven electrolysis and (3) thermochemical processes, all focused on initially converting H 2 O and CO 2 to H 2 and CO. Recent advances, as well as remaining challenges, associated with solar-to-fuel conversion are discussed, as is the need for an intensive research and development effort to bring such processes to scale.

14 SOLAR ENERGY↗

Understanding the Value of Energy Storage for Power System Reliability and Resilience Applications

Abstract Purpose of Review The need for energy storage in the electrical grid has grown in recent years in response to a reduced reliance on fossil fuel baseload power, added intermittent renewable investment, and expanded adoption of distributed energy resources. While the methods and models for valuing storage use cases have advanced significantly in recent years, the value of enhanced resilience remains an open research question. Recent Findings The findings of the recent research indicate that energy storage provides significant value to the grid, with median benefit values for specific use cases ranging from under $10/kW-year for voltage support to roughly $100/kW-year for capacity and frequency regulation services. While the value of lost load is used widely to estimate the benefits of mitigating short-duration outages, reaching as high as $719/kilowatt-year, there is no consensus when it comes to monetizing the value of improving grid resilience. Summary This paper presents a use case taxonomy for energy storage and uses the taxonomy to conduct a meta-analysis of an extensive set of energy storage valuation studies. It reviews several approaches for monetizing reliability and resiliency services and presents a proposed approach for valuing resiliency for energy storage investments.

25 ENERGY STORAGE↗

Bimetallic Electrocatalysts for CO 2 Reduction

The increasing concentration of CO 2 in the atmosphere has caused various environmental issues. Utilizing CO 2 as the carbon feedstock to replace traditional fossil sources in commodity chemical production could be a potential solution to reduce CO 2 emissions. Electrochemical reduction of CO 2 has attracted much attention because it not only converts CO 2 into a variety of useful chemicals under mild reaction conditions but also can be powered by renewable electricity at remote locations. From this review article, we summarize recent literature works on the topic of bimetallic electrocatalysts for CO 2 reduction. Both selectivity and activity of bimetallic catalysts strongly depend on their compositions and surface structures. Tuning the properties of a bimetallic catalyst could result in a wide range of products, including carbon monoxide, hydrocarbons, carboxylate and liquid oxygenates. Here, by reviewing recent research efforts in the field of bimetallic electrocatalysts for CO 2 reduction, we aim to provide the community with a timely overview of current status of bimetallic CO 2 electrocatalysts and to stimulate new ideas to design better catalysts for more efficient CO 2 electrolysis processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

3D printing of packaging inserts from biomass-fungi composites: Environmental sustainability analysis

In this study, a comprehensive Life cycle assessment (LCA) is conducted on molded packaging inserts from expanded polystyrene (EPS) foam, molded packaging inserts from biomass-fungi composite, and 3D-printed packaging inserts from biomass-fungi composite under the low mix / high volume (LMHV) scenario and molded and machined packaging inserts from EPS foam, molded and machined packaging inserts from biomass-fungi composite, and 3D-printed packaging inserts from biomass-fungi composite under the high mix / low volume (HMLV) scenario. Six environmental impact categories—climate change, acidification, eutrophication, fossil resource scarcity, land use, and water consumption—are analyzed to evaluate the environmental trade-offs associated with each type of packaging inserts. Under the LMHV scenario, molded packaging inserts from biomass-fungi composite emerge as the best option due to their lower impact on climate change, acidification and water consumption compared to other types of packaging inserts. Conversely, molded packaging inserts from biomass-fungi composite face challenges in land use and eutrophication, primarily due to raw material production. LCA also reveals that 3D-printed packaging inserts from biomass-fungi composite are the most environmentally favorable option under the HMLV scenario, due to significantly lower contributions to climate change, eutrophication, and water consumption compared to other types of packaging inserts. Conversely, 3D-printed packaging inserts from biomass-fungi composite face challenges in acidification and land use, primarily due to raw material production. As part of the LCA, sensitivity analyses show that sourcing energy from 100% renewable sources substantially lowers climate change impacts across all packaging types, while varying transportation distances results in only minor changes, indicating the dominant role of upstream material and manufacturing processes. Additional sensitivity analysis is conducted under the HMLV scenario to assess the impact of material removal during machining on the environment. The amount of material removal is varied from 10 to 70% for the sensitivity analysis and it highlights that the amount of material removed during machining has no significant impact on climate change for packaging inserts from EPS foam. However, molded and machined packaging inserts from biomass-fungi composite show an increasing trend in climate change with higher amount of material removal, while 3D-printed packaging inserts from biomass-fungi composite exhibit a decreasing trend, driven by reduced raw material usage and energy consumption.

09 BIOMASS FUELS↗

Process Heat for Chemical Industry

Process heating with nuclear energy can reduce greenhouse gas emissions by reducing combustion of fossil fuels in fired heaters as steam boilers. Light water reactors can replace the majority of steam duties used by industry; however, high temperature processes such as steam methane reforming require advanced high temperature reactors. Here, guidance on matching the scale of nuclear reactors with specific industries is provided. Principles of heat transport, temperature boosting, and substitution for hot combustion gases are also discussed in this section.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Production of Biofuels from Biomass by Fungi

The use of abundantly available lignocellulosic biomass as a feedstock for biofuels has emerged as a sustainable alternative to fossil fuels. Industries across the world have shifted their focus to enhancing bioconversion through fungi, efficient and tractable organisms capable of producing valuable cost-effective enzymes. The many capabilities of fungal species offer opportunities for the tailored production of valuable compounds from a variety of substrates. This review details a high level examination of how fungal enzymes degrade plant polysaccharides to simple sugars through the sensitive coordination of transcription factors. Scientists have used a variety of tools like genetically engineering fungi, combining various species, and altering industrial/process conditions to enhance biomass deconstruction and fermentation while solving obstacles like inhibitory compounds. While ethanol and biodiesel are highlighted, additional biofuels are mentioned. These advances have uncovered themes like synergism and biocatalysis, led to the discovery of new fungal species, and revealed unique enzymatic mechanisms. Notably, this research highlights the complexity of metabolic systems within and between fungi. Fungi have been indispensable to the biofuel industry and future research will be crucial for energy sustainability.

Ottum, Eva MN↗

Energy-efficient building technologies

Buildings consume one-third of the total final energy produced on the globe and are responsible for almost 40 percent of total carbon dioxide generation annually. The latest carbon dioxide burden of buildings approached 10 Gigatons in the year 2019. Energy-efficient building technologies are necessary to address the climate change induced by greenhouse gases and fulfill the growth in demand and continuously depleting energy reserves. To meet the net-zero carbon footprint goals, sustainable, renewable energy resources, efficient building technologies, and demand management strategies are needed. Achieving zero emissions will require buildings to be equipped with energy-efficient technologies while completely avoiding on-site fossil fuel consumption and being only powered by renewable energy. In this context, this chapter provides an overview of various building technologies, including envelopes, materials, equipment, appliances, and integration concepts, which will play a significant role in lowering the overall energy consumption in both existing building stock and new buildings. Specifically, the following areas are discussed in detail: emerging building envelope designs, thermal comfort and refrigeration equipment, bridging technologies for improved energy efficiency in the ongoing energy transition, hybrid renewable (photovoltaic) configurations, energy storage technologies, miscellaneous appliances, refrigerants, and renewable fuels. The influence of key design and operating characteristics on annual carbon footprint is presented.

Cheekatamarla, Praveen↗

Effect of stress on Laves phase precipitation in creep ruptured Grade 92 ferritic martensitic steel characterized by a novel accessible method

At high temperature conditions relevant to fossil and nuclear energy plants, Laves phase (Fe 2 X, X=Mo, W) precipitation is observed in common ferritic martensitic (FM) structural steels, with various reported effects on creep behavior. Despite being valuable metrics to correlate with mechanical properties and other precipitate phases, the volume fraction and number density of Laves phase precipitates has been difficult to quantify accurately using common techniques such as transmission electron microscopy (TEM) due to the relatively large size (∼0.25 μm) and low number density (∼10 11 cm −3 ) of Laves precipitates. Here, to address this characterization challenge, we developed and demonstrated a high-throughput and widely accessible method to quantify the volume fraction and number density of the Laves phase based on scanning electron microscope (SEM) images with a backscattered electron signal and the information depth (ID) of backscattered electrons. We applied this new technique in creep ruptured Grade 92 FM steel to study the effect of Laves phase on creep properties and determine the influence of stress on Laves phase precipitation. The quantitative accuracy of the SEM-based volume fraction and number density values was verified using synchrotron high energy X-ray diffraction and serial sectioning tomography. Stress did not significantly affect the Laves phase size or volume fraction during creep testing at 550 – 650°C and stress levels of 90 – 260 MPa (vs. unstressed conditions). Conversely, a moderate but statistically significant stress-enhanced increase in Laves phase number density, corresponding to an increase in nucleation rate, occurred during creep exposure above 110 MPa.

Creep↗