Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FEEDING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,711 records · Page 95

Protective role of AgRP neuron's PDK1 against salt-induced hypertension

Highlights: • AgRP neuron specific PDK1 KO mice responded to high salt diet with hypertension. • The KO mice showed elevated urinary noradrenalin excretion under high salt diet. • The KO mice showed elevated NUCB2 mRNA expression in paraventricular nucleus (PVN). • PVN NUCB2 silencing counteracted elevated noradrenalin excretion and hypertension. • AgRP neuron's PDK1 serves to regulate PVN nesfatin-1 neurons and blood pressure. In the hypothalamic arcuate nucleus (ARC), orexigenic agouti-related peptide (AgRP) neurons regulate feeding behavior and energy homeostasis. The 3-phosphoinositide-dependent protein kinase-1 (PDK1) in AgRP neurons serves as a major signaling molecule for leptin and insulin, the hormones regulating feeding behavior, energy homeostasis and circulation. However, it is unclear whether PDK1 in AGRP neurons is also involved in regulation of blood pressure. This study explored it by generating and analyzing AgRP neuron-specific PDK1 knockout (Agrp-Pdk1{sup flox/flox}) mice and effect of high salt diet on blood pressure in KO and WT mice was analyzed. Under high salt diet feeding, systolic blood pressure (SBP) of Agrp-Pdk1{sup flox/flox} mice was significantly elevated compared to Agrp-Cre mice. When the high salt diet was switched to control low salt diet, SBP of Agrp-Pdk1{sup flox/flox} mice returned to the basal level observed in Agrp-Cre mice within 1 week. In Agrp-Pdk1{sup flox/flox} mice, urinary noradrenalin excretion and NUCB2 mRNA expression in hypothalamic paraventricular nucleus (PVN) were markedly upregulated. Moreover, silencing of NUCB2 in the PVN counteracted the rises in urinary noradrenalin excretions and SBP. These results demonstrate a novel role of PDK1 in AgRP neurons to counteract the high salt diet-induced hypertension by preventing hyperactivation of PVN nesfatin-1 neurons.

60 APPLIED LIFE SCIENCES↗

Mathematical model parameters for describing the particle size spectra of knife-milled corn stover

Particle size distributions of Corn stover (Zea mays L.) created by a knife mill were determined using integral classifying screens with sizes from 12.7 to 50.8 mm, operating at speeds from 250 to 500 rpm, and mass input rates ranging from 1 to 9 kg min_1. Particle distributions were classified using American Society of Agricultural and Biological Engineers (ASABE) standardised sieves for forage analysis that incorporated a horizontal sieving motion. The sieves were made from machined-aluminium with their thickness proportional to the sieve opening dimensions. A wide range of analytical descriptors that could be used to mathematically represent the range of particle sizes in the distributions were examined. The correlation coefficients between geometric mean length and screen size, feed rate, and speed were 0.980, 0.612, and _0.027, respectively. Screen size and feed rate directly influenced particle size, whereas operating speed had a weak indirect relation with particle size. The Rosin Rammler equation fitted the chopped corn stover size distribution data with coefficient of determination (R2) > 0.978. This indicated that particle size distribution of corn stover was well-fit by the Rosin Rammler function. This can be attributed to the fact that Rosin Rammler expression was well suited to the skewed distribution of particle sizes. Skewed distributions occurred when significant quantities of particles, either finer or coarser, existed or were removed from region of the predominant size. The mass relative span was slightly greater than 1, which indicated that it was a borderline narrow to wide distribution of particle sizes. The uniformity coefficient was <4.0 for 19.0 50.8 mm screens, which indicated particles of relatively uniform size. Knife mill chopping of corn stover produced fine-skewed mesokurtic particles with 12.7 50.8 mm screens. Size-related parameters, namely, geometric mean length, Rosin Rammler size parameter, median length, effective length, and size guide number, were well predicted at R2 values of 0.981, 0.982, 0.979, 0.950 and 0.978, respectively as a function of knife mill screen size, feed rate, and speed. Results of this analysis of particle sizes could be applied to the selection of knife mill operating parameters to produce a particular size of corn stover chop, and could serve as a guide for the relationships among various analytic descriptors of biomass particle distributions.

09 BIOMASS FUELS↗

Coupled uptake and conversion of C 12 H 26 and NO on Pd/SSZ-13: Experiments and modeling

The uptake of NO in the presence of C 12 H 26 (dodecane) and H 2 O over a Pd/SSZ-13 washcoated Passive NOx Adsorber (PNA) monolith is reported. When a co-feed containing C 12 H 26 and NO is supplied to an unsaturated (with C 12 H 26 ) sample, the NO uptake is unaffected but during the subsequent temperature ramp the release of trapped NO is delayed from 175°C to over 220°C. The release delay is beneficial for PNA performance as the primary NO x aftertreatment technology, Selective Catalytic Reduction (SCR), is not operated below 200°C. However, pre-saturation of C 12 H 26 followed by the same NO and C 12 H 26 co-feed results in a decrease in the NO uptake compared to the NO-only feed. We conjecture that C 12 H 26 pre-adsorbed on the exterior surface of the sample blocks NO access to the pores, decreasing the number of available sites for NO uptake. Oxidation of C 12 H 26 leads to the generation of partial oxidation product CO at lower temperatures (<250°C) and deep oxidation product CO 2 at higher temperatures. Carbon monoxide binds strongly to Pd sites with NO and can delay NO release. A Pd/SSZ-13 washcoated monolith model developed in an earlier study [Ambast et al., Appl. Catal. B. Environmental (2021)] is upgraded to include C 12 H 26 storage, release, and conversion. Through a systematic combination of judicious experiments, model tuning, and validation, we provide evidence for the underlying NO uptake and release mechanisms in the presence of C 12 H 26 .

42 ENGINEERING↗

Transient kinetic insights into selective propene oxidation over industrial bismuth molybdate catalysts

Selective oxidation of propene to acrolein over industrial multicomponent bismuth molybdate (BMO) catalysts significantly depends on reaction conditions that include operating parameters and catalyst state. Here, this work investigates selective propene oxidation in the intrinsic kinetic paradigm of Temporal Analysis of Products (TAP) reactor by systematically varying catalyst redox state, temperature, and oxygen-to-propene feed ratio. A 93 % propene conversion with an acrolein yield of 80 % is achieved at elevated temperatures (450 °C) on oxidized catalysts under oxygen-rich conditions (O 2 :C 3 H 6 = 10). However, these conditions diminish acrolein-to-CO 2 selectivity due to enhanced total oxidation to CO 2 . In contrast, a reduced catalyst state, moderate temperature (350 °C), and lower oxygen feed (O 2 :C 3 H 6 = 1) nearly doubles the acrolein to-CO 2 selectivity, albeit at a lower acrolein yield (33 %). Transient kinetic studies together with a kinetic model that simplify the major product formation pathways in lumped non-elementary forms reveal that the availability of surface oxygen species plays a pivotal role in governing reaction pathways. Additionally, density functional theory (DFT) calculations on pure BMO catalysts inform the role of surface redox states on propene and oxygen activation barriers. Lattice oxygen at acrolein-selective sites drives both acrolein and CO 2 formation, while adsorbed oxygen at activation sites favors unselective CO 2 generation. This work establishes a critical relationship between transient product selectivity and surface oxygen availability, which is strongly influenced by catalyst redox state, feed ratio, and reaction temperature. These insights underscore the importance of dynamic reactor operation strategies and offer a foundation for designing next-generation propene oxidation processes with tunable acrolein selectivity.

42 - ENGINEERING↗

PERFORMANCE ANALYSIS OF AN ENGINEERING SCALE HYDROTHERMAL LIQUEFACTION SYSTEM

This work evaluates the Modular Hydrothermal Liquefaction System (MHTLS), an engineering-scale, integrated continuous HTL plant operated at the Pacific Northwest National Laboratory (PNNL), for converting realistic wet wastes into energy-dense biocrudes. The production campaigns discussed here processed algae, sewage sludges, lignocellulosic blends, Industrial food waste, and engineered food-waste slurries at 350?°C and around 200?bar, with nominal feed rates of ~12?L?h?¹. We report biocrude yields and composition, establish mass and elemental (C, N) balances, and quantify energy performance via heater duties, heat-exchanger behavior, and system-level efficiencies. Biocrudes contained 76–80?wt?% C (dry, ash-free) with HHVs of 38-41?MJ?kg?¹, substantially higher than feed materials HHVs of 16.6–26.1?MJ?kg?¹ and approaching petroleum fuels. Dry, ash-free biocrude yields of 32–53?wt?% corresponded to 43–71?wt?% carbon yields, with 18–40?wt?% of feed carbon routed to the aqueous phase. Thermal efficiencies were 50-65%, and total energy efficiencies, including reactor heat input, were 35-55%. A counter-current tube-in-tube heat exchanger delivered U values of 200–450?W?m?²?K?¹, with fouling-induced declines impacting heat recovery and heater duty. The analysis highlights three priorities for the process intensification of HTL: robust, fouling-resistant heat recovery, hydrodynamically suitable reactor and heat-exchanger designs, simplified and predictable solids management, and biocrude-water separation.

Biocrude production↗

Advanced Thin Zeolite/Metal Flat Sheet Membrane for Energy Efficient Air Dehumidification and Conditioning

Traditional vapor compression cooling has high power consumption in warm and humid climates due to the water condensation on the evaporator coils. The combining membrane dehumidification and vapor compression cooling process holds promise for efficient drying and conditioning of warm and humid air. In this approach, the water vapor content in fresh incoming air is first reduced below dew point through a high-efficient, in-line membrane dehumidifier, followed by sensible cooling. A membrane with excellent air/water separation performance and low cost is needed to realize this design idea. In this paper, we, for the first time, report on the development of novel thin flat sheet of zeolite membranes for air dehumidification application. The membrane is prepared by deposition of an ultra-thin H 2 O-selective zeolite membrane film (< 2 µm) on a thin (~ 50 µm) porous metal sheet support. Under the testing condition of 32oC and 90% RH feed air, the optimal membrane shows water permeance as high as 1.74×10 -5 mol m -2 Pa -1 s -1 , which is about 1 to 3 orders of magnitude higher than previously reported in the literature, and a water vapor/air separation factor over 500, which allows selective and energy-efficient removal of water out of the humid air by vacuum. In addition, this zeolite/metal sheet membrane exhibits excellent stability as no apparent decline of separation performance is observed during 8-day continuous testing with humid in-house air. To simulate various climate conditions, the membrane is tested over a wide range of separation conditions which include variation in feed air temperature, feed air RH, and permeate pressure. It is estimated that 50% or higher energy efficiency gain over the conventional vapor compression system can be obtained when the membrane separation factor is equal or high than 200. A sensitivity analysis shows that the membrane separation factor and the condenser pressure have significant impacts on the process energy efficiency.

Xing, Rong↗

Energy requirements of the switchable polarity solvent forward osmosis (SPS-FO) water purification process

A model was developed to estimate the process energy requirements of a switchable polarity solvent forward osmosis (SPS FO) system for water purification from aqueous NaCl feed solution concentrations ranging from 0.5 to 4.0 molal at an operational scale of 480 m3/day (feed stream). The model indicates recovering approximately 90% of the water from a feed solution with NaCl concentration similar to seawater using SPS FO would have total equivalent energy requirements between 2.4 and 4.3 kWh per m 3 of purified water product. The process is predicted to be competitive with current costs for disposal/treatment of produced water from oil and gas drilling operations. As a result, once scaled up the SPS FO process may be a thermally driven desalination process that can compete with the cost of seawater reverse osmosis.

15 GEOTHERMAL ENERGY↗

Osmotically assisted reverse osmosis for high salinity brine treatment

Here, this work evaluates a novel osmotically assisted reverse osmosis (OARO) process for dewatering high salinity brines using readily available membranes and equipment. While traditional reverse osmosis processes are limited to treating brines with osmotic pressures below the membrane burst pressure, in OARO, the osmotic pressure difference across a membrane is reduced with a permeate side saline sweep. A series of OARO stages can be used to sequentially reduce the concentration of the feed until a traditional RO process can obtain fully desalinated water. This paper develops an OARO model to identify feasible operating conditions for this process and to estimate the water recovery and energy consumption across a range of brine feed concentrations. For a feed of 100–140 g/L sodium chloride, we estimate that the OARO process is capable of a 35–50% water recovery with an energy consumption of 6–19 kWh per m 3 of product water. Finally, the results suggest that an OARO dewatering process improves upon the recovery of reverse osmosis for high salinity brines and has a comparable or lower energy consumption than mechanical vapor compression.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A techno-economic assessment of membrane distillation for treatment of Marcellus shale produced water

Membrane distillation (MD) is a promising desalination technology for treatment of high salinity shale gas produced water. Techno-economic assessment (TEA) is necessary for evaluating the economic feasibility of MD for produced water treatment as compared to other shale gas produced water management strategies. A detailed TEA for a hypothetical 0.5 million gallons per day (MGD) direct contact MD (DCMD) that concentrates produced water from 10% (100,000 mg/L) Total Dissolved Solids (TDS) to 30% salinity is presented in this study. The model is developed based on a combination of experimental results, ASPEN Plus process model, best available engineering knowledge, and cost estimates. Analysis reveals that thermal energy cost for MD operation contributes the most to total cost of treating produced water in an MD plant. Additionally, the results of sensitivity analysis reveal that feed TDS level and thermal energy price have a significant impact on total cost of treating produced water. We also explore the implications of utilizing waste heat on the economics of the MD technology for produced water treatment. Here the results reveal that the total cost of treating produced water using MD is $\$$5.70/m 3 feed which decreases significantly to $\$$0.74/m 3 feed when MD is integrated with a source of waste heat.

42 ENGINEERING↗

Energy efficient supercritical water desalination using a high-temperature heat pump: A zero liquid discharge desalination

Supercritical water desalination (SCWD) is zero liquid discharge technology that can potentially control the solubility of different electrolytes. However, SCWD is an energy-intensive process and requires high-quality thermal heat (> 450 °C). This study proposes the integration of a high-temperature heat pump to reduce the SCWD energy requirement. The integrated system energy consumption improves by 36% for 3.5% feed concentration and 14% for 20% feed, and the distillate cost reduces by 15% and 10%. Another benefit of the proposed integration is the system can be operated using only electricity as a heat source, as is the case with commonly used high-recovery thermal desalination technology. The integrated SCWD-heat pump system shows superior performance compared to the commercially used brine concentrator and crystallizer system. It is approximately 20% more energy-efficient for 25% feed concentration and 8% cheaper. Hence, the integrated SCWD-heat pump has the potential to outperform the pre-existing high-recovery desalination technology.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Unconventional desalination: The use of cyclone separators in HDH desalination to achieve zero liquid discharge

Research in water desalination technologies is constantly growing to meet global demands for freshwater. Though acting to meet these demands, the rapid growth and spread of desalination technologies poses environmental issues due to the increasing brine concentrates that are ultimately discharged back to nature. This article presents a cyclone separator to transform a humidification-dehumidification (HDH) cycle to a dual-product cycle to produce freshwater and solid salt crystals for highly saline streams. A desalination cycle equipped with a cyclone separator is used to treat water with 3.5%–81% salinity. The separation efficiency is well above 99% and can produce potable water from hyper saline feed in a once-through process. Further, the cyclone separator performance was tested under different conditions including humidity ratios, relative humidities, and feed stream's salinities. The cyclone separator is self-cleaning and overcomes salt scaling. This behavior is a direct function of the walls' temperature and the carrier air dew point. Self-cleaning capability allows the cyclone separator to treat feed water of extreme salinities (up to 810,000ppm) down to freshwater salinity with zero liquid discharge. The cyclone separator was utilized in a novel HDH desalination technology to treat different salinities. The product was freshwater of salinity <500ppm.

42 ENGINEERING↗

Cost optimization of low-salt-rejection reverse osmosis

Low-salt-rejection reverse osmosis (LSRRO) is an emerging membrane-based desalination technology for concentrating brines with potentially lower energy consumption and cost than thermally driven processes. We assess the technoeconomic performance of LSRRO by using an optimization model that minimizes the levelized cost of water (LCOW). We develop detailed models for the RO module and other equipment using WaterTAP (Water treatment Technoeconomic Assessment Platform), an open-source simulation and optimization software for water treatment. We improve upon previous LSRRO cost optimization studies by optimizing the salt permeability for each stage, which has significant implications for technoeconomic performance. We present the cost-optimal design, operation, and performance for three cases: 35 g/L TDS feed at 70% recovery, 70 g/L at 55%, and 125 g/L at 35%. The cost-optimal LCOW and specific energy consumption (SEC) for these cases are 0.70, 1.89, and 7.41 $/m 3 and 3.9, 8.4, and 30.4 kWh/m 3 , respectively. For each case, we use sensitivity analyses to provide guidance on key factors that impact economic viability. We also present the cost-optimal LCOW and SEC for feed concentrations between 5 and 220 g/L TDS and recoveries between 30 and 90%. So, we compare LSRRO to other high-salinity desalination technologies and find that it may be cost-competitive below feed concentrations of 125 g/L.

54 ENVIRONMENTAL SCIENCES↗

Effects of heavy metals on biomarkers for oxidative stress in Griffon vulture (Gyps fulvus)

Metals are involved in the formation of reactive oxygen species (ROS) which may result in metal-related oxidative stress that can lead to oxidative damage to lipids, DNA and proteins. It is necessary to understand the mechanisms of metal toxicity in wild birds, and the concentrations that cause effects on oxidative stress biomarkers. The aim of this study is to assess the concentrations of lead (Pb), cadmium (Cd), mercury (Hg), copper (Cu) and zinc (Zn) with regards to oxidative stress in blood samples of 66 Griffon vultures (Gyps fulvus) from two areas of the Autonomous Community of Valencia (East of Spain). The two study areas (Alcoy n=36 and Cinctorres n=30) were selected as random locations of interest that had not yet been studied, and are feeding stations where supplementary food, mainly of pork origin, is provided for vultures. Given that the two study areas are not considered polluted sites, we expected to find low metal concentrations. However, there are no known threshold concentrations at which metals can affect antioxidant systems, and low metal levels may have an effect on antioxidant biomolecules. In this study, since sampling was done at the beginning of the hunting season, the low Pb levels found in most Griffon vultures from Alcoy and Cinctorres (median=12.37 and 16.26 μg/dl, respectively) are suggestive of background levels usually found in vultures that feed on pork carcasses all year round. The ingestion of game meat with bullet fragments in carcasses or with Pb shots embedded in the flesh could be the cause of the high blood Pb concentrations found in three vultures from Cinctorres (83, 290 and 362 μg/dl). Griffon vultures feeding in Cinctorres had enhanced CAT and GST activities and tGSH concentrations, which may be interpreted as protective response against the higher TBARS levels. This study provides threshold concentrations at which metals affect antioxidant system derived from 66 samples of Griffon vulture. Blood Cd concentrations greater than 0.05 μg/dl produced an induction of 33% in GPx and of 44% in CAT activity in erythrocytes of vultures from Alcoy. Hg concentrations in blood higher than 3 μg/dl produced an induction of 10% in SOD activity. Concentrations of Pb above 15 µg/dl in blood produced an inhibition of 12.5% in GPx and 11.3% in CAT activity, and a TBARS induction of 10.7% in erythrocytes of Griffon vultures. - Highlights: • Except for 3 Griffon vultures, lead levels could be considered background levels. • Three vultures may be exposed to meat with bullet fragments (blood Pb=83–362 μg/dl). • Blood Cd levels≥0.05 μg/dl caused an induction of GPx and CAT activity (33% and 44%). • Blood Hg levels≥3 μg/dl caused an induction of 10% in SOD activity. • Blood Pb≥15 µg/dl caused an inhibition of GPx and CAT activity and a TBARS induction.

54 ENVIRONMENTAL SCIENCES↗

POPs in free-ranging pilot whales, sperm whales and fin whales from the Mediterranean Sea: Influence of biological and ecological factors

The pilot whale Globicephala melas, the sperm whale Physeter macrocephalus, and the fin whale Balaenoptera physalus are large cetaceans permanently inhabiting the Mediterranean Sea. These species are subjected to numerous anthropogenic threats such as exposure to high levels of contaminants. Therefore, selected persistent organic pollutants POPs (29 PCBs, 15 organochlorine compounds, 9 PBDEs and 17 PCDD/Fs) were analysed in blubber biopsies of 49 long-finned pilot whales, 61 sperm whales and 70 fin whales sampled in the North Western Mediterranean Sea (NWMS) from 2006 to 2013. Contamination profile and species feeding ecology were then combined through the use of stable isotopes. δ{sup 13}C, δ{sup 15}N values and POPs levels were assessed through IR-MS and GC–MS respectively. To assess the toxic potency of the dioxin-like compounds, the TEQ approach was applied. δ{sup 15}N values were 12.2±1.3‰ for sperm whales, 10.5±0.7‰ for pilot whales and 7.7±0.8‰ in fin whales, positioning sperm whales at higher trophic levels. δ{sup 13}C of the two odontocetes was similar and amounted to −17.3±0.4‰ for sperm whales and −17.8±0.3‰ for pilot whales; whilst fin whales were more depleted (−18.7±0.4‰). This indicates a partial overlap in toothed-whales feeding habitats, while confirms the differences in feeding behaviour of the mysticete. Pilot whales presented higher concentrations than sperm whales for ΣPCBs (38,666±25,731 ng g{sup −1} lw and 22,849±15,566 ng g{sup −1} lw respectively), ΣPBDEs (712±412 ng g{sup −1} lw and 347±173 ng g{sup −1} lw respectively) and ΣDDTs (46,081±37,506 ng g{sup −1} lw and 37,647±38,518 ng g{sup −1} lw respectively). Fin whales presented the lowest values, in accordance with its trophic position (ΣPCBs: 5721±5180 ng g{sup −1} lw, ΣPBDEs: 177±208 ng g{sup −1} lw and ΣDDTs: 6643±5549 ng g{sup −1} lw). Each species was characterized by large inter-individual variations that are more related to sex than trophic level, with males presenting higher contaminant burden than females. The discriminant analysis (DA) confirmed how DDTs and highly chlorinated PCBs were influential in differentiating the three species. Pollutant concentrations of our species were significantly higher than both their Southern Hemisphere and North Atlantic counterparts, possibly due to the particular Mediterranean geomorphology, which influences pollutants distribution and recycle. Dioxin-like PCBs accounted for over 80% of the total TEQ. This study demonstrated (1) an important exposure to pollutants of Mediterranean cetaceans, often surpassing the estimated threshold toxicity value of 17,000 ng g{sup −1} lw for blubber in marine mammals; and (2) how the final pollutant burden in these animals is strongly influenced not only by the trophic position but also by numerous other factors such as sex, age, body size and geographical distribution. - Highlights: • We analysed POPs concentrations in cetaceans from North-western Mediterranean Sea. • We integrated δ{sup 13}C and δ{sup 15}N values to combine trophic position and contamination. • Odontocetes show PCBs level higher than the toxicity threshold of 17 μg g{sup −1} lw. • Trophic position, sex, body size and distribution affect interspecies diversity.

54 ENVIRONMENTAL SCIENCES↗

Experimental investigation of Multi-Mode heat transfer to a Free-Falling dilute particle cloud in a heated vertical tube

The development of dilute particle heat exchangers and reactors for advanced energy systems requires an understanding of the multi-mode heat transfer from a heated wall to falling particles. This study presents experimental results of the overall heat transfer coefficient for a free-falling, dilute flow of particles with solid volume fraction from 0.0005 to 0.006 corresponding to feed rates from 3.7 kg s -1 m -2 to 44 kg s -1 m -2 in a vertical, heated tube containing quiescent air at atmospheric pressure. Tube wall temperatures are varied between 300°C to 900°C while keeping the particle inlet temperature constant. The experimental results show that the overall heat transfer coefficient is a strong function of particle feed rate and surface temperature. Good agreement was obtained with prior studies conducted at comparable temperatures but lower particle feed rates (< 4 kg m -2 s -1 ). The established correlations for particle-to-wall radiation and particle-to-gas convection were used to estimate the wall-to-gas convective contribution from the measured overall heat transfer coefficient. The experimental results indicated a 4 to 6 times improvement in the wall convection in the solid-gas mixture compared to that expected from natural convection in a single-phase gas. Furthermore, the data presented here are applicable to characterize heat transfer in dilute particle heat exchangers, furnaces, and solar receivers.

14 SOLAR ENERGY↗

Propagation of non-Gaussian voltage angle fluctuations in high-voltage power grids

Recent measurements have reported non-Gaussian tails in the distribution of frequency data in electric power grids. Large frequency deviations may induce grid instabilities and it is therefore crucial to understand how noise disturbances with long, non-Gaussian tails propagate. Here, we investigate how fluctuations in power feed-in, characterized by non-zero cumulants of their distribution, propagate through high-voltage power grids. Unlike previous investigations which focused on the white-noise limit, we consider the limit of long noise correlation time, where power feed-in fluctuates over times longer than the inherent dynamical time scales of the grid - the relevant regime for large-scale, high-voltage distribution grids. In this work, we show that in this limit, the skewness and kurtosis of the power feed-in distribution propagate similarly as its variance, independently of the distribution of inertia. Non-Gaussianities from individual sources of noise therefore persist throughout the entire network. This finding is corroborated by numerical results on a realistic model of the synchronous grid of continental Europe.

42 ENGINEERING↗

Nuclear waste vitrification efficiency: cold cap reactions

The cost and schedule of nuclear waste treatment and immobilization are greatly affected by the rate of glass production. Various factors influence the performance of a waste-glass melter. One of the most significant, and also one of the least understood, is the process of batch melting. Studies are being conducted to gain fundamental understanding of the batch reactions, particularly those that influence the rate of melting, and models are being developed to link batch makeup and melter operation to the melting rate. Batch melting takes place within the cold cap, i.e., a batch layer floating on the surface of molten glass. The conversion of batch to glass consists of various chemical reactions, phase transitions, and diffusion-controlled processes. These include water evaporation (slurry feed contains as high as 60% water), gas evolution, the melting of salts, the formation of borate melt, reactions of borate melt with molten salts and with amorphous oxides (Fe2O3 and Al2O3), the formation of intermediate crystalline phases, the formation of a continuous glass-forming melt, the growth and collapse of primary foam, and the dissolution of residual solids. To this list we also need to add the formation of secondary foam that originates from molten glass but accumulates on the bottom of the cold cap. This study presents relevant data obtained for a high-level-waste melter feed and introduces a one-dimensional (1D) mathematical model of the cold cap as a step toward an advanced three-dimensional (3D) version for a complete model of the waste glass melter. The 1D model describes the batch-to-glass conversion within the cold cap as it progresses in a vertical direction. With constitutive equations and key parameters based on measured data, and simplified boundary conditions on the cold-cap interfaces with the glass melt and the plenum space of the melter, the model provides sensitivity analysis of the response of the cold cap to the batch makeup and melter conditions. The model demonstrates that batch foaming has a decisive influence on the rate of melting. Understanding the dynamics of the foam layer at the bottom of the cold cap and the heat transfer through it appears crucial for a reliable prediction of the rate of melting as a function of the melter-feed makeup and melter operation parameters. Although the study is focused on a batch for waste vitrification, the authors expect that the outcome will also be relevant for commercial glass melting.

Hrma, Pavel R↗

Effect of sucrose on the oxidation-reduction conditions and retention of rhenium during vitrification of low-activity waste

Technetium speciation and solubility during nuclear waste vitrification are affected by oxygen partial pressure in the melt. Thus, reducing agents such as sucrose, which are routinely added to nuclear waste feeds to repress foaming, can significantly affect the volatilization of Tc and increase its retention in glass. Using Re as a surrogate for Tc, we measured the effect of sucrose addition to two low-activity waste melter feeds on the Re retention, oxygen partial pressure, and iron redox as functions of temperature. As expected, Re retention in glass increased as the sucrose content increased. Furthermore, this is attributed to sucrose reaction with nitrates and nitrites in the feed. Destruction of nitrates and nitrites reduces the salt phase fraction and thus likely promotes Re diffusion into the glass-forming melt. In agreement with available literature, we discuss that a modest increase in the sucrose content (compared to current practice) can significantly improve the Tc retention without reducing Fe 2+ to metal.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗