Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Experimental Methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,711 records · Page 95

Monte Carlo simulation of the neutron characteristics of VVER-1000 core using the MCU-PD program and comparison of the results with calculations by the BIPR-7A program and experimental data

The Monte Carlo method has been used to simulate the neutron transport in nuclear reactors for over fifty years. Fast progress in computer power and development of more and more robust and reliable algorithms, codes, and nuclear databases allow solving more challenging problems, including three-dimensional (3D) simulations of full-scale reactor cores. Short descriptions of a full-scale 3D model of the VVER-1000 core and algorithms and methods implemented in the MCU-PD and BIPR-7A codes and a comparison of the calculations by each program as well as a comparison with experimental data are given in this paper.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

A DELAUNAY TRIANGULATION APPROACH FOR SEGMENTING CLUMPS OF NUCLEI

Cell-based fluorescence imaging assays have the potential to generate massive amount of data, which requires detailed quantitative analysis. Often, as a result of fixation, labeled nuclei overlap and create a clump of cells. However, it is important to quantify phenotypic read out on a cell-by-cell basis. In this paper, we propose a novel method for decomposing clumps of nuclei using high-level geometric constraints that are derived from low-level features of maximum curvature computed along the contour of each clump. Points of maximum curvature are used as vertices for Delaunay triangulation (DT), which provides a setof edge hypotheses for decomposing a clump of nuclei. Each hypothesis is subsequently tested against a constraint satisfaction network for a near optimum decomposition. The proposed method is compared with other traditional techniques such as the watershed method with/without markers. The experimental results show that our approach can overcome the deficiencies of the traditional methods and is very effective in separating severely touching nuclei.

60 APPLIED LIFE SCIENCES↗

DEM simulation of experimental dense granular packing

In this study we present numerical analysis performed on the experimental results of sphere packings of mono-sized hard sphere whose packing fraction spans across a wide range of 0.59<{Phi}<0.72. Using X-ray Computed Tomography (XCT), we have full access to the 3D structure of the granular packings. Numerical analysis performed on thr data provides the first experimental proofs of how densification affects local order parameters. Furthermore by combining Discrete Element Method (DEM) and the experimental results from XCT, we investigate how the intergranular forces change with the onset of crystallization.

36 MATERIALS SCIENCE↗

Discussion of “Response Surface Design Evaluation and Comparison” by C.M. Anderson-Cook, C.M. Borror, and D.C Montgomery

The article “Response Surface Design Evaluation and Comparison” by C.M. Anderson-Cook, C.M. Borror, and D.C Montgomery is discussed. The discussion covers three issues. First, graphical methods for evaluating and comparing experimental designs should utilize the unscaled prediction variance (PV) rather than the scaled prediction variance (SPV). Using PV makes it easier for practitioners to see how prediction variance is decreased by designs with larger numbers of points, and to assess the “cost” of that decrease in a flexible manner. Using SPV confounds “prediction variance” and “cost” information in a pre-defined way, thus making design choice harder for practitioners. The second and third comments are that bias properties as well as variance properties of designs should be accounted for in constructing, evaluating, and comparing experimental designs.

97 MATHEMATICS AND COMPUTING↗

On efficient Hessian computation using the edge pushing algorithm in Julia

Evaluating the Hessian matrix of second-order derivatives at a sequence of points can be costly when applying second-order methods for nonlinear optimization. In this work, we discuss our experiences implementing the recently proposed Edge Pushing (EP) method in Julia as an experimental replacement for the current colouring-based methods used by JuMP, an open-source algebraic modelling language. We propose an alternative data structure for sparse Hessians to avoid the use of hash tables and analyse the space and time complexity of EP method. In our benchmarks, we find that EP is very competitive in terms of both preprocessing time and Hessian evaluation time. As a result, we identify cases where EP closes the performance gap between JuMP's previous implementation and the implementation in AMPL, a commercial software package with similar functionality.

97 MATHEMATICS AND COMPUTING↗

Study of multilayered SiGe semiconductor structures by X-ray diffractometry, grazing-incidence X-ray reflectometry, and secondary-ion mass spectrometry

In this publication, we report the results of studying a multilayerd nonperiodic SiGe/Si structure by the methods of X-ray diffractometry, grazing-angle X-ray reflectometry, and secondary-ion mass spectrometry (SIMS). Special attention is paid to the processing of the component distribution profile using the SIMS method and to consideration of the most significant experimental distortions introduced by this method. A method for processing the measured composition distribution profile with subsequent consideration of the influence of matrix effects, variation in the etching rate, and remnants of ion sputtering is suggested. The results of such processing are compared with a structure model obtained upon combined analysis of X-ray diffractometry and grazing-angle reflectometry data. Good agreement between the results is established. It is shown that the combined use of independent techniques makes it possible to improve the methods of secondary-ion mass spectrometry and grazing-incidence reflectometry as applied to an analysis of multilayered heteroepitaxial structures (to increase the accuracy and informativity of these methods)

36 MATERIALS SCIENCE↗

Comparison of three state-of-the-art crystal plasticity based deformation twinning models for magnesium alloys

In magnesium alloys, deformation twinning and its interactions with dislocation slip are responsible for a sigmoidal shape stress–strain behavior and an asymmetrical tension–compression yield strength in magnesium alloys. The sensitivity of twinning to the underlying microstructure renders the crystal plasticity method the most commonly adopted modeling approach for magnesium-twinning. This paper compares three state-of-the-art crystal plasticity-based twinning models from the literature, namely the elastic-viscoplastic self-consistent twinning-detwinning (EVPSC-TDT) model, crystal plasticity finite element model based on enhanced predominate twin reorientation approach (CPFE-ePTR), and the crystal plasticity finite element model based on “discrete twinning” approach (CPFE-DT). A polycrystalline microstructure is simulated with all three methods to compare the resulting stress–strain curves and lattice strains to those from the experimentally measured data. All three methods showed the capability of capturing the experimental results with different levels of accuracy. Additionally, the EVPSC-TDT method avoids solving the finite element matrices and showed the highest computational efficiency. The CPFE-ePTR model shows a higher accuracy in capturing the lattice strain. The CPFE-DT relies on high-resolution finite element mesh and is much slower than the other two methods, but it captured the local deformation concentration and stress reversal phenomena near the twin band, which was not possible with the other two methods. Based on the comparison, guidance for the selection of the appropriate model based on the specific modeling target is provided in this paper.

36 MATERIALS SCIENCE↗

Direct Observation of Xe and Kr Adsorption in a Xe-Selective Microporous Metal–Organic Framework

The cryogenic separation of noble gases is energy-intensive and expensive, especially when low concentrations are involved. Metal organic frameworks containing polarizing groups within their pore spaces are predicted to be efficient Xe/Kr solid state adsorbents but no experimental insights on the nature of the Xe-network interaction is available to date. Here we report a new microporous metal organic framework (designated SBU2) that is selective toward Xe over Kr at ambient conditions, with Xe/Kr selectivity of about 10 and Xe capacity of 37.1 wt% at 298 K. Results of single crystal diffraction show Xe selectivity may be attributed to the specific geometry of the pores, forming cages built with phenyl rings and enriched with polar -OH groups, both serving as strong adsorption sites for polarizable Xe gas. The Xe/Kr separation in SBU2 was investigated with experimental and computational breakthrough methods. These experiments showed that Xe broke through the column after 3 min, followed by Kr at 4.5 min after injection of gases mixture, which confirmed that SBU2 has a real practical potential for separating Xe from Kr. Computational calculations show that SBU2 capacity and adsorption selectivity is comparable to the best-performing unmodified MOFs such as Ni-MOF-74 or Co Formate.

Xenon, Krypton↗

Methods to measure contact angles in scCO 2 -brine-sandstone systems

Numerous methods are used to measure contact angles ( θ ) in multiphase systems. The wettability and θ are primary controls on CO 2 residual trapping during Geologic Carbon Storage (GCS) and determining these values within rock pores is paramount to increasing storage efficiency. One traditional experimental approach is the sessile drop method which involves θ measurements on a single image of droplets. More recent developments utilize X-ray micro-computed tomography (CT) scans which provide the resolutions necessary to image in situ θ of fluids at representative conditions; however, experimental micro-CT data is limited and varied. To further examine θ distributions in supercritical-CO 2 -brine-sandstone systems, a combination of manual and automated θ measurement methods were utilized to measure θ using both sessile drop and micro-CT images of two sandstone cores. Here, the purpose of this work was threefold: (1) compare two current and two new θ measuring methods using micro-CT images of scCO 2 -brine-sandstone systems; (2) determine how traditional experimental method (sessile drop) θ results compare to in situ θ results (micro-CT); and (3) determine if the Matlab Contact Angle Algorithm (MCAA) from Klise et al. (2016) can be used to measure θ scCO 2 -brine-sandstone systems.

54 ENVIRONMENTAL SCIENCES↗

FLUKA simulation validation to measure the beam energy of a cyclotron

FLUKA is a fully integrated particle physics MonteCarlo simulation package which has many applications in high energy experimental physics and engineering. When using a cyclotron for medical radionuclide production, it is important to know that the beam energy is suitable to cause the intended nuclear reaction and minimize unwanted impurities. Here, this work focuses on the comparison of FLUKA as a tool to measure the beam energy of a cyclotron with experimental results using the method of stacked copper foils interspaced by an aluminum degrader. We compared two methods to determine the activity ratio: determining the activity in each foil using the experimentally measured cross-sections from the National Nuclear Data Center (NNDC) cross-section data and calculating the activity in the two Cu foils using the FLUKA program. These results were compared to those reported by Gagnon et al., 2011. The FLUKA results gave energy measurements that were different than the true energy by a percentage in the range of 2.4% to 13%, suggesting that FLUKA is not recommended for pre-calculating the cyclotron beam energy using these low Z materials without experimental confirmation. It also confirms that the experimental cross-section data from the NNDC database is superior for this application giving energy values that ranged from 0.1% to 1.6% from the true energy.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Ground-state properties of neutron magic nuclei

A systematic study of the ground-state properties of the entire chains of even–even neutron magic nuclei represented by isotones of traditional neutron magic numbers N = 8, 20, 40, 50, 82, and 126 has been carried out using relativistic mean-field plus Bardeen–Cooper–Schrieffer approach. Our present investigation includes deformation, binding energy, two-proton separation energy, single-particle energy, rms radii along with proton and neutron density profiles, etc. Several of these results are compared with the results calculated using nonrelativistic approach (Skyrme–Hartree–Fock method) along with available experimental data and indeed they are found with excellent agreement. In addition, the possible locations of the proton and neutron drip-lines, the (Z, N) values for the new shell closures, disappearance of traditional shell closures as suggested by the detailed analyzes of results are also discussed in detail.

74 ATOMIC AND MOLECULAR PHYSICS↗

Strongly Correlated Quantum Spin Liquids versus Heavy Fermion Metals: A Review

This review considers the topological fermion condensation quantum phase transition (FCQPT) that explains the complex behavior of strongly correlated Fermi systems, such as frustrated insulators with quantum spin liquid and heavy fermion metals. The review contrasts theoretical consideration with recent experimental data collected on both heavy fermion metals (HF) and frustrated insulators. Such a method allows to understand experimental data. We also consider experimental data collected on quantum spin liquid in Lu 3 Cu 2 Sb 3 O 14 and quasi-one dimensional (1D) quantum spin liquid in both YbAlO 3 and Cu(C 4 H 4 N 2 )(NO 3 ) 2 with the aim to establish a sound theoretical explanation for the observed scaling laws, Landau Fermi liquid (LFL) and non-Fermi-liquid (NFL) behavior exhibited by these frustrated insulators. The recent experimental data on the heavy-fermion metal α-YbAl 1-x Fe x B 4 , with x=0.014, and on its sister compounds β-YbAlB 4 and YbCo 2 Ge 4 , carried out under the application of magnetic field as a control parameter are analyzed. We show that the thermodynamic and transport properties as well as the empirical scaling laws follow from the fermion condensation theory. We explain how both the similarity and the difference in the thermodynamic and transport properties of α-YbAl 1-x Fe x B 4 and in its sister compounds β-YbAlB 4 and YbCo 2 Ge 4 emerge, as well as establish connection of these (HF) metals with insulators Lu 3 Cu 2 Sb 3 O 14 , Cu(C 4 H 4 N 2 )(NO 3 ) 2 and YbAlO 3 . We demonstrate that the universal LFL and NFL behavior emerge because the HF compounds and the frustrated insulators are located near the topological FCQPT or are driven by the application of magnetic fields.

36 MATERIALS SCIENCE↗

Adaptive Beam Loading Compensation in Room Temperature Bunching Cavities

In this paper we present the design, simulation, and proof of principle results of an optimization based adaptive feedforward algorithm for beam-loading compensation in a high impedance room temperature cavity. We begin with an overview of prior developments in beam loading compensation. Then we discuss different techniques for adaptive beam loading compensation and why the use of Newton?s Method is of interest for this application. This is followed by simulation and initial experimental results of this method.

43 PARTICLE ACCELERATORS↗

Comparison between Gaussian-type orbitals and plane wave ab initio density functional theory modeling of layer silicates: Talc [Mg{sub 3}Si{sub 4}O{sub 10}(OH){sub 2}] as model system

The quantum chemical characterization of solid state systems is conducted with many different approaches, among which the adoption of periodic boundary conditions to deal with three-dimensional infinite condensed systems. This method, coupled to the Density Functional Theory (DFT), has been proved successful in simulating a huge variety of solids. Only in relatively recent years this ab initio quantum-mechanic approach has been used for the investigation of layer silicate structures and minerals. In the present work, a systematic comparison of different DFT functionals (GGA-PBEsol and hybrid B3LYP) and basis sets (plane waves and all-electron Gaussian-type orbitals) on the geometry, energy, and phonon properties of a model layer silicate, talc [Mg{sub 3}Si{sub 4}O{sub 10}(OH){sub 2}], is presented. Long range dispersion is taken into account by DFT+D method. Results are in agreement with experimental data reported in literature, with minimal deviation given by the GTO/B3LYP-D* method regarding both axial lattice parameters and interaction energy and by PW/PBE-D for the unit-cell volume and angular values. All the considered methods adequately describe the experimental talc infrared spectrum.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Simulation of mixed-mode fracture using the combined finite–discrete element method

It has been shown experimentally that under mixed tensile and compressive stress states, a corresponding mixed-mode fracture will occur. Here, the formation of mixed-mode fractures is investigated using the combined finite–discrete element method. A series of simulations with confining pressures ranging from 7.5 to 150 MPa generate a spectrum of mixed-mode failure conditions. These stress states at failure span the transition from the tensile to compressive failure. The models reproduce previous experiments on Carrara marble using a dog-bone geometry, and a comparison shows good qualitative agreement with the experimental observations. This paper demonstrates that mixed-mode fracture can be captured via numerical simulations and identifies areas where further research is required to better understand mixed-mode fracture processes.

42 ENGINEERING↗

Online Learning for Commercial Buildings

There has been an increased interest in designing optimization based techniques for the control of building heating, ventilation, and air-conditioning (HVAC) systems for either improving the energy efficiency of buildings or providing ancillary services to the electric grid. The performance of such prediction-based control techniques heavily rely on the model of a building’s thermal dynamics. However, the development of high fidelity building thermal dynamic models is challenging given the presence of large uncertainties that affect thermal loads in buildings such as building envelope performance, thermal mass, internal heat gains as well as occupants' behavior. In this paper, we propose a method to identify both a resistive-capacitive parametric model, and non -parametric load uncertainties using measured input-output data. The parametric model is obtained using semi-parametric regression, whereas the non-parametric part is based on Random Forest, where regression trees are used to derive the dependency of non-parametric terms on both building operation parameters and ambient temperature. The effectiveness of the method is evaluated using experimental data collected from an office building at the Pacific Northwest National Laboratory (PNNL) campus. The proposed methodology was observed to provide improved accuracy over appropriate baseline strategies, when predicting indoor air temperatures.

Dong, Jin↗

Learning heterogeneous reaction kinetics from X-ray videos pixel by pixel

Reaction rates at spatially heterogeneous, unstable interfaces are notoriously difficult to quantify, yet are essential in engineering many chemical systems, such as batteries and electrocatalysts. Experimental characterizations of such materials by operando microscopy produce rich image datasets, but data-driven methods to learn physics from these images are still lacking because of the complex coupling of reaction kinetics, surface chemistry and phase separation. Here we show that heterogeneous reaction kinetics can be learned from in situ scanning transmission X-ray microscopy (STXM) images of carbon-coated lithium iron phosphate (LFP) nanoparticles. Combining a large dataset of STXM images with a thermodynamically consistent electrochemical phase-field model, partial differential equation (PDE)-constrained optimization and uncertainty quantification, we extract the free-energy landscape and reaction kinetics and verify their consistency with theoretical models. We also simultaneously learn the spatial heterogeneity of the reaction rate, which closely matches the carbon-coating thickness profiles obtained through Auger electron microscopy (AEM). Across 180,000 image pixels, the mean discrepancy with the learned model is remarkably small (<7%) and comparable with experimental noise. Our results open the possibility of learning nonequilibrium material properties beyond the reach of traditional experimental methods and offer a new non-destructive technique for characterizing and optimizing heterogeneous reactive surfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hyperspectral image reconstruction for x-ray fluorescence tomography

A penalized maximum-likelihood estimation is proposed to perform hyperspectral (spatio-spectral) image reconstruction for X-ray fluorescence tomography. The approach minimizes a Poisson-based negative log-likelihood of the observed photon counts, and uses a penalty term that has the effect of encouraging local continuity of model parameter estimates in both spatial and spectral dimensions simultaneously. The performance of the reconstruction method is demonstrated with experimental data acquired from a seed of arabidopsis thaliana collected at the 13-ID-E microprobe beamline at the Advanced Photon Source. The resulting element distribution estimates with the proposed approach show significantly better reconstruction quality than the conventional analytical inversion approaches, and allows for a high data compression factor which can reduce data acquisition times remarkably. In particular, this technique provides the capability to tomographically reconstruct full energy dispersive spectra without compromising reconstruction artifacts that impact the interpretation of results.

Fluorescence microscopy↗