Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Enthalpy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,711 records · Page 95

Engineering medium-range order and polyamorphism in a nanostructured amorphous alloy

Like crystalline materials, the properties of amorphous materials can be tailored by tuning the local atomic-to-nanoscale structural configurations. Polyamorphism is evident by the coexistence of kinetically stabilized amorphous structures with tailorable short-to-medium-range orders, providing a viable means to engineer the degree of local order and heterogeneity. Here, we report experimental evidence of the coexistence of liquid-like and solid-like amorphous phases in a Ni82P18 amorphous alloy with enhanced thermal stability and plasticity prepared by pulsed electrodeposition. The two amorphous phases, of comparable volume fraction of ~50% each, have similar short-range order but are distinguished by packing at the medium-range length scale (>6 Å). Upon heating, a structure crossover at ~450 K was observed, where the liquid-like structure transforms to the solid-like structure, as evidenced by the enthalpy release and an anomalous contraction of atomic structure over the medium-range length scale, due to the metastable nature of the liquid-like structure.

36 MATERIALS SCIENCE↗

Enhancing glass-forming ability via frustration of nano-clustering in alloys with a high solvent content

The glass-forming ability (GFA) of alloys with a high-solvent content such as soft magnetic Fe-based and Al-based alloys is usually limited due to strong formation of the solvent-based solid solution phase. Herein, we report that the GFA of soft magnetic Fe-based alloys (with .70 at.% Fe to ensure large saturation magnetization) could be dramatically improved by doping with only 0.3 at.% Cu which has a positive enthalpy of mixing with Fe. It was found that an appropriate Cu addition could enhance the liquid phase stability and crystallization resistance by destabilizing the a-Fe nano-clusters due to the necessity to redistribute the Cu atoms. However, excessive Cu doping would stimulate nucleation of the a-Fe nano-clusters due to the repulsive nature between the Fe and Cu atoms, thus deteriorating the GFA. Our findings provide new insights into understanding of glass formation in general.

36 MATERIALS SCIENCE↗

Pressure effect on stabilities of self-Interstitials in HCP structures

The self-interstitial atoms (SIAs) mediate the evolution of micro-structures which is crucial in understanding the instabilities of hexagonal close packed (HCP) structures. Taken zirconium as a prototype, we investigate the pressure effect on the stabilities of SIAs using first-principles calculations based on density-functional theory. We found that the pressure greatly affects the stability of the SIAs. The SIAs in basal planes are more stable to changes in pressure. The most stable SIA configuration changes from basal octahedral (BO) to octahedral (O) at pressure of 21 GPa. The lowest formation enthalpy configuration switches from BO to S (split-dumbbell) at P = 30 GPa. Our results reveal that it is important to take the pressure effect into account when predicting the micro-structural evolution of HCP structures.

Ab initio calculation↗

On the correlation between microscopic structural heterogeneity and embrittlement behavior in metallic glasses

To establish a relationship between microstructure and mechanical properties, we systematically annealed a Zr-based bulk metallic glass (BMG) at 100 ~ 300°C and measured their mechanical and thermal properties. The as-cast BMG exhibits some ductility, while the increase of annealing temperature and time leads to the transition to a brittle behavior that can reach nearly-zero fracture energy. The differential scanning calorimetry did not find any significant changes in crystallization temperature and enthalpy, indicating that the materials still remained fully amorphous. Elastic constants measured by ultrasonic technique vary only slightly with respect to annealing temperature and time, which does obey the empirical relationship between Poisson’s ratio and fracture behavior. Nanoindentation pop-in tests were conducted, from which the pop-in strength mapping provides a “mechanical probe” of the microscopic structural heterogeneities in these metallic glasses. Based on stochastically statistic defect model, we found that the defect density decreases with increasing annealing temperature and annealing time and is exponentially related to the fracture energy. A ductile-versus-brittle behavior (DBB) model based on the structural heterogeneity is developed to identify the physical origins of the embrittlement behavior through the interactions between these defects and crack tip.

36 MATERIALS SCIENCE↗

The effect of C2 substitution on melting point and liquid phase dynamics of imidazolium based-ionic liquids: insights from molecular dynamics simulations

Using molecular dynamics simulations, the melting points and liquid phase dynamic properties were studied for four alkyl-imidazolium-based ionic liquids, 1-n-butyl-3-methylimidazolium hexafluorophosphate ([BMIM][PF6]), 1-n-butyl-2,3-dimethylimidazolium hexafluorophosphate ([BMMIM][PF6]), 1-ethyl-3-methylimidazolium hexafluorophosphate ([EMIM][PF6]), and 1-ethyl-2,3-dimethylimidazolium hexafluorophosphate ([EMMIM][PF6]), respectively. Experimentally it has been observed that the substitution of a methyl group for a hydrogen at the C2 position of the cation ring leads to an increase in both the melting point and liquid phase viscosity, contrary to arguments that had been made regarding associations between the ions. The melting points of the four ionic liquids were accurately predicted using simulations, as were the trends in viscosity. The simulation results show that the origin of the effect is mainly entropic, although enthalpy also plays an important role.

Zhang, Y↗

Polymer composites prepared by low-temperature post-irradiation polymerization of C 2 F 4 in the presence of graphene-like material: synthesis and characterization

Polymer polytetrafluoroethylene (PTFE) microwave exfoliated graphene oxide (MEGO) composites containing up to 80 wt% PTFE were prepared by low-temperature post-irradiation polymerization of C2F4 in the presence of the graphene-like material. Composites were characterized by FTIR, NMR, XPS, SEM, TGA, XRD, broadband dielectric spectroscopy and DSC techniques. The melting point of PTFE in the composite (332.5 °C) was higher than that of pure PTFE by 8.8 C. The measured values of the melting enthalpy (ΔH m 51.5 and 45.4 J g1) were used to calculate the extent of crystallinity in the PTFE and PTFE MEGO composite (0.63 and 0.55, respectively). No CF3 end groups typical of commercial PTFE have been detected in the PTFE MEGO composites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Towards computational design of zeolite catalysts for CO 2 reduction

Carbon dioxide, an energy waste by-product with significant environmental consequences can be utilized and converted into useful chemical products such as formic acid, formaldehyde, methanol or methane, but more energy and cost efficient catalytic processes are required. Here we develop the methodology for the intelligent selection of porous zeolites for dual-adsorption of hydrogen and carbon dioxide as templates for preparing the optimal catalytic environment for carbon dioxide reduction. Useful zeolite catalysts were computationally screened from over 300 thousand zeolite structures using a combination of molecular simulation and machine-learning techniques. Several of the top candidates were very promising energy-efficient templates for catalysis with the potential to perform at 50% above conventional reactors. As a result, it is also found that an optimal cavity size of around 6 Å is required to maximize the change in entropy–enthalpy upon adsorption with a maximum void space >30% to boost product formation per volume of material.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Compressed sodalite-like MgH 6 as a potential high-temperature superconductor

Recently, an experimental work reported a very high T c of ~190 K in hydrogen sulphide (H 2 S) at 200 GPa. The search for new superconductors with high superconducting critical temperatures in hydrogen-dominated materials has attracted significant attention. In this work we predict a candidate phase of MgH 6 with a sodalite-like framework in conjunction with first-principles electronic structure calculations. The calculated formation enthalpy suggests that it is thermodynamically stable above 263 GPa relative to MgH 2 and solid hydrogen (H 2 ). Moreover, the absence of imaginary frequency in phonon calculations implies that this MgH 6 structure is dynamically stable. Furthermore, our electron–phonon coupling calculation based on BCS theory indicates that this MgH 6 phase is a conventional superconductor with a high superconducting critical temperature of ~260 K under high pressure, which is even higher than that of the recently reported compressed H 2 S. The present results offer insight in understanding and designing new high-temperature superconductors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Integrating theory, synthesis, spectroscopy and device efficiency to design and characterize donor materials for organic photovoltaics: a case study including 12 donors

There have been remarkable improvements in the power conversion efficiency of solution-processable Organic Photovoltaics (OPV) have largely been driven by the development of novel narrow bandgap copolymer donors comprising an electron-donating (D) and an electron-withdrawing (A) group within the repeat unit. The large pool of potential D and A units and the laborious processes of chemical synthesis and device optimization, has made progress on new high efficiency materials slow with a few new efficient copolymers reported every year despite the large number of groups pursuing these materials. In our paper we present an integrated approach toward new narrow bandgap copolymers that uses theory to guide the selection of materials to be synthesized based on their predicted energy levels, and time-resolved microwave conductivity (TRMC) to select the best-performing copolymer–fullerene bulk heterojunction to be incorporated into complete OPV devices. We validate our methodology by using a diverse group of 12 copolymers, including new and literature materials, to demonstrate good correlation between (a) theoretically determined energy levels of polymers and experimentally determined ionization energies and electron affinities and (b) photoconductance, measured by TRMC, and OPV device performance. The materials used here also allow us to explore whether further copolymer design rules need to be incorporated into our methodology for materials selection. For example, we explore the effect of the enthalpy change (ΔH) during exciton dissociation on the efficiency of free charge carrier generation and device efficiency and find that ΔH of -0.4 eV is sufficient for efficient charge generation.

14 SOLAR ENERGY↗

The role of side chain entropy and mutual information for improving the de novo design of Kemp eliminases KE07 and KE70

Side chain entropy and mutual entropy information between residue pairs have been calculated for two de novo designed Kemp eliminase enzymes, KE07 and KE70, and for their most improved versions at the end of laboratory directed evolution (LDE). Here, we find that entropy, not just enthalpy, helped to destabilize the preference for the reactant state complex of the designed enzyme as well as favoring stabilization of the transition state complex for the best LDE enzymes. Furthermore, residues with the highest side chain couplings as measured by mutual information, when experimentally mutated, were found to diminish or annihilate catalytic activity, some of which were far from the active site. In summary, our findings demonstrate how side chain fluctuations and their coupling can be an important design feature for de novo enzymes, and furthermore could be utilized in the computational steps in lieu of or in addition to the LDE steps in future enzyme design projects.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Surface directed reversible imidazole ligation to nickel(ii) octaethylporphyrin at the solution/solid interface: a single molecule level study

Scanning tunneling microscopy (STM) is used to study for the first time the reversible binding of imidazole (Im) and nickel(II) octaethylporphyrin (NiOEP) supported on highly oriented pyrolytic graphite (HOPG) at the phenyloctane/NiOEP/HOPG interface at 25 °C. The ligation of Im to the NiOEP receptor while not observed in fluid solution is readily realized at the solution/HOPG interface. The coordination process scales with increasing Im concentration and can be effectively modeled by the Langmuir isotherm. At room temperature it is determined that the standard free energy of adsorption is ΔG c = -15.8 kJ mol -1 and the standard enthalpy of adsorption is estimated to be ΔH c ≈ -80 kJ mol -1 . The reactivity of imidazole toward NiOEP adsorbed on HOPG is attributed to charge donation from the graphite stabilizing the Im–Ni bond. This charge transfer pathway is supported by molecular and periodic modeling calculations which indicate that the Im ligand behaves as a π-acceptor. DFT calculations also show that the nickel ion in the Im–NiOEP/HOPG complex is in a singlet ground state. This is surprising since both our calculations and previous experimental studies find a triplet ground state for the five and six coordinated Im–nickel(II) porphyrins in the gas-phase or in solution. Both the experimental and the theoretical findings provide information that is useful for better understanding of chemical sensing/recognition and catalytic processes that utilize metal–organic complexes adsorbed on surfaces where the reactivity of the metal is moderated by the substrate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A density functional theory based approach for predicting melting points of ionic liquids

Accurate prediction of melting points of ILs is important both from the fundamental point of view and from the practical perspective for screening ILs with low melting points and broadening their utilization in a wider temperature range. In this work, we present an ab initio approach to calculating melting points of ILs with known crystal structures and illustrate its application for a series of 11 ILs containing imidazolium/pyrrolidinium cations and halide/polyatomic fluoro-containing anions. The melting point is determined as a temperature at which the Gibbs free energy of fusion is zero. The Gibbs free energy of fusion can be expressed through the use of the Born-Fajans-Haber cycle via the lattice free energy of forming a solid IL from gaseous phase ions and the sum of the solvation free energies of ions comprising IL. Dispersion-corrected density functional theory (DFT) involving (semi)local (PBE-D3) and hybrid exchange-correlation (HSE06-D3) functionals is applied to estimate the lattice enthalpy, entropy, and free energy. The ions solvation free energies are calculated with the SMD-generic-IL solvation model at the M06-2X/6-31+G(d) level of theory under standard conditions. The melting points of ILs computed with the HSE06-D3 functional are in good agreement with the experimental data, with a mean absolute error of 30.5 K and a mean relative error of 8.5%. The model is capable of accurately reproducing the trends in melting points upon variation of alkyl substituents in organic cations and replacement one anion by another. The results verify that the lattice energies of ILs containing polyatomic fluoro-containing anions can be approximated reasonably well using the volume-based thermodynamic approach. However, there is no correlation of the computed lattice energies with molecular volume for ILs containing halide anions. Moreover, entropies of solid ILs follow two different linear relationships with molecular volume for halides and polyatomic fluoro-containing anions. As a result, continuous progress in predicting crystal structures of organic salts with halide anions will be a key factor for successful prediction of melting points with no prior knowledge of the crystal structure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Adsorption-enhanced hydrolysis of glucan oligomers into glucose over sulfonated three-dimensionally ordered mesoporous carbon catalysts

The hydrolysis of cellulose and β(1 → 4) oligosaccharides on carbon catalysts is a promising approach for the selective production of glucose from cellulose and its derivatives. In this study, a structure–property relationship was developed for the hydrolysis of water soluble glucan oligomers over three dimensionally ordered mesoporous (3DOm) carbon with sulfonic acid groups. It was found that the number of sulfonic acid groups on 3DOm carbon catalysts and their adsorption properties need to be optimized to maximize the hydrolysis of water soluble glucan oligomers. The adsorption capacity of glucan oligomers on 3DOm carbon increases with their chain length, which can be attributed to two molecular behaviors: (a) long glucan oligomers adsorbed on the carbon surface exhibit a dense packing structure compared with relatively small glucan oligomers; and (b) a part of a glucan oligomer “dangles” off the carbon surface due to its branched structure. Furthermore, it was found that the adsorption enthalpy and entropy increased with increasing the chain length of the glucan oligomers, which favors the hydrolysis reaction to produce glucose over the carbon catalysts.

09 BIOMASS FUELS↗

Aromatic C–H bond cleavage by using a Cu( i ) ate-complex

In situ X-ray absorption spectroscopy (XAS), infrared (IR) and nuclear magnetic resonance (NMR) techniques were used to identify the structures and reactivity of copper-containing active intermediates in the sp 2 C–H bond cleavage reaction of electron-deficient aromatics. An ate-complex [Cu(OtBu)2]Na was found to be able to cleave the C–H bond of benzothiazole (ArH) producing [ArCuI(OtBu)]Na with a rate constant of 3.2 × 10 -2 mol -1 L s -1 at -50 °C and with an activation enthalpy of 0.73 kcal mol-1 at room temperature.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Complexation of NpO2+ with (2-Hydroxyethyl)ethylenediaminetriacetic Acid (HEDTA) in Aqueous Solutions: Thermodynamic Studies and Structural Analysis

Complexation of Np(V) with N-(2-hydroxyethyl)ethylenediaminetriacetic acid (HEDTA) was studied in aqueous solution (I = 1.0 mol L - 1 NaClO 4 , t = 25 °C) by spectrophotometry, microcalorimetry and Extended X-ray absorption fine structure (EXAFS) spectroscopy. Equilibrium constants for the formation of three complexes, NpO 2 L 2- , NpO 2 (HL) - , and (NpO 2 )2(OH)2L26 - , were determined to be (6.91 ± 0.06), (4.28 ± 0.03) and -(4.93 ± 0.03), respectively. The enthalpies of complexation were determined to be -(8.0 ± 2.0) kJ mol -1 for NpO 2 L 2 - and -(2.2 ± 2.0) kJ mol-1 for NpO 2 (HL) - . Thermodynamic data of the complexation of Np(V) with HEDTA were compared to those of Np(V) with other aminopolycarboxylic acids, gaining insight into the possible coordination modes of the complexes. The EXAFS studies provided further structural information on those modes. In both NpO 2 L 2 - and NpO 2 (HL) - complexes, HEDTA coordinates to Np(V) in a tridentate mode through two oxygens of two carboxylic groups and one nitrogen of the amine group. In the (NpO 2 ) 2 (OH) 2 L 2 6- complex, two Np(V) atoms are bridged by two hydroxides and each HEDTA maintains the tridentate coordination mode.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Investigation of oxygen self-diffusion in PuO 2 by combining molecular dynamics with thermodynamic calculations

In the present work, the defect properties of oxygen self-diffusion in PuO 2 are investigated over a wide temperature (300–1900 K) and pressure (0–10 GPa) range, by combining molecular dynamics simulations and thermodynamic calculations. Based on the well-established cBΩ thermodynamic model which connects the activation Gibbs free energy of diffusion with the bulk elastic and expansion properties, various point defect parameters such as activation enthalpy, activation entropy, and activation volume were calculated as a function of T and P. Molecular dynamics calculations provided the necessary bulk properties for the proper implementation of the thermodynamic model, in the lack of any relevant experimental data. The estimated compressibility and the thermal expansion coefficient of activation volume are found to be more than one order of magnitude greater than the corresponding values of the bulk plutonia. As a result, the diffusion mechanism is discussed in the context of the temperature and pressure dependence of the activation volume.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗