Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Engineering Design”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,711 records · Page 95
All sourcesNASA NTRSDOE OSTI
NASA NTRS1982

Silicon production process evaluations

Engineering design of the third distillation column in the process was accomplished. The initial design is based on a 94.35% recovery of dichlorosilane in the distillate and a 99.9% recovery of trichlorosilane in the bottoms. The specified separation is achieved at a reflux ratio of 15 with 20 trays (equilibrium stages). Additional specifications and results are reported including equipment size, temperatures and pressure. Specific raw material requirements necessary to produce the silicon in the process are presented. The primary raw materials include metallurgical grade silicon, silicon tetrachloride, hydrogen, copper (catalyst) and lime (waste treatment). Hydrogen chloride is produced as by product in the silicon deposition. Cost analysis of the process was initiated during this reporting period.

Source record↗
NASA NTRS1982

The photometric performance of the IUE

The scientific objectives and performance characteristics of a new astronomy mission referred to as the far ultraviolet spectroscopic explorer, or FUSE are being defined by team involving people experienced in instrumentation, observations, and theory in order to develop. mission and instrumental requirements that best meet the scientific needs. The team is intended to have a lifetime of about one year, ending with the submission of a report to NASA which could be used as the basis for an engineering design study. The principal objective of FUSE is to obtain astronomical spectra at wavelengths shorter than is possible with the Space Telescope.

Holm, A. V.↗
NASA NTRS1982

The far ultraviolet spectroscopic explorer

The scientific objectives and performance characteristics of a new astronomy mission referred to as the far ultraviolet spectroscopic explorer, or FUSE are being defined by a team involving people experienced instrumental requirements that best meet the scientific needs. The team is intended to have a lifetime of about one year, ending with the submission of a report to NASA which could be used as the basis for an engineering design study. The principal objective of FUSE is to obtain astronomical spectra at wavelengths shorter than is possible with the Space Telescope.

Boggess, A.↗
NASA NTRS1982

Low and medium heating value coal gas catalytic combustor characterization

Catalytic combustion with both low and medium heating value coal gases obtained from an operating gasifier was demonstrated. A practical operating range for efficient operation was determined, and also to identify potential problem areas were identified for consideration during stationary gas turbine engine design. The test rig consists of fuel injectors, a fuel-air premixing section, a catalytic reactor with thermocouple instrumentation and a single point, water cooled sample probe. The test rig included inlet and outlet transition pieces and was designed for installation into an existing test loop.

Schwab, J. A.↗
NASA NTRS1982

Combining analysis with optimization at Langley Research Center - An evolutionary process

Analytical and computational advances, at Langely Research Center (La RC), contributing to the evolution of computer programs combining analysis and optimization are presented, namely, strength sizing, concurrent strength and flutter sizing, and general optimization. Current work on a software system which executes the analysis and optimization in a sequential rather than concurrent mode is then described, as a step toward the long-term goal at La RC of developing the methodology for such systems. The software system is designated Enginering Analysis Language (EAL)/Programming Structural Synthesis System (PR)SSS), and work is being done on the incorporation of PROSSS into EAL. EAL language can perform most FORTRAN operations, including testing, branching, and looping, and its data base system can easily be accessed by any processor using FORTRAN callable utility subroutines. Some numerical results showing the accuracy of EAL/PROSSS are given.

Rogers, J. L., Jr.↗
NASA NTRS1983

KSC Construction Cost Index

Kennedy Space Center cost Index aids in conceptual design cost estimates. Report discusses development of KSC Cost Index since January 1974. Index since January 1974. Index provides management, design engineers, and estimators an up-to-data reference for local labor and material process. Also provides mount and rate of change in these costs used to predict future construction costs.

Brown, J. A.↗
NASA NTRS1981

Earth orbital teleoperator system evaluation: Test report, 1979 - 1980

Areas which have significant influence upon the engineering design of an operational teleoperator are addressed. Teleoperator lighting systems, thruster systems, and stereoptic visual systems are discussed. The effects of specified levels of several teleoperator subsystems on human operator performance are determined. Four evaluations are reviewed, each dealing with operator performance under various task conditions.

Source record↗
NASA NTRS1983

Telemetry Modulation and Coping

Digital telemetry has supplanted analog telemetry for deep space communications. With digital telemetry, the telecommunications systems design engineer may use error correcting codes. This allows increased error protection at the cost of increased bandwidth. All science telemetry returned from the Voyager and Galileo spacecraft are protected by error correcting codes. Both the modulation and coding of digital telemetry for the deep space channel are considered. The descriptions include relative performance of some competing schemes. However, the treatment given here is, of necessity, cursory. A small class of modulation schemes has proven to be best for the deep space channel. The digital telemetry is either phase-shift-keyed onto a squarewave subcarrier and then phase modulated onto the carrier or the digital telemetry is directly phase modulated onto the carrier.

Kinman, P. W.↗
NASA NTRS1982

Some solutions to the problems and pitfalls of laser velocimetry in a large transonic wind tunnel

Attention is given to engineering design and development features of a two-component, coaxial backscatter laser velocimetry system which attempts to realize the long-recognized desirability of this technique's use for nonintrusive flow measurement. The design of the optics for the present 16-foot transonic wind tunnel device, and problems associated with the installation of the system in the hostile, test section plenum chamber environment are discussed.

Reubush, D. E.↗
NASA NTRS1983

ADS-1 - A new general-purpose optimization program

Today, numerous programs are available which may be coupled with finite element analysis or other analysis techniques to perform the optimization function in the solution of structural synthesis problems. However, most of these codes include only one or two algorithms and many have not been tested on problems of significant size and complexity. There is, therefore, a need for a reliable, general-purpose, publicly available code, containing a variety of modern algorithms for use in structural synthesis as well as general engineering design. The ADS-1 program (Automated Design Synthesis: Version 1) was written in response to this need. The present investigation has the objective to present the capabilities of the ADS program and to demonstrate its application to structural synthesis. The ADS program solves the general nonlinear constrained optimization problem in the standard form. At each level of the optimization process, several options are available.

Vanderplaats, G. N.↗
NASA NTRS1985

Software-Implementation Plan

Top-down implementation plan provides a methodology for solving problems in or aiding software engineering design.

Jacobson, G.↗
NASA NTRS1984

Comparisons of rational engineering correlations of thermophoretically-augmented particle mass transfer with STAN5-predictions for developing boundary layers

Modification of the code STAN5 to properly include thermophoretic mass transport, and examination of selected test cases developing boundary layers which include variable properties, viscous dissipation, transition to turbulence and transpiration cooling. Under conditions representative of current and projected GT operation, local application of St(M)/St(M),o correlations evidently provides accurate and economical engineering design predictions, especially for suspended particles characterized by Schmidt numbers outside of the heavy vapor range.

Gokoglu, S. A.↗
NASA NTRS1984

Propulsion issues for advanced orbit transfer vehicles

Studies of the United States Space Transportation System show that in the mid to late 1990s expanded capabilities for orbital transfer vehicles (OTV) will be needed to meet increased payload requirements for transporting materials and possibly men to geosynchronous orbit. Discussion and observations relative to the propulsion system issues of space basing, aeroassist compatibility, man ratability and enhanced payload delivery capability are presented. These issues will require resolution prior to the development of a propulsion system for the advanced OTV. The NASA program in support of advanced propulsion for an OTV is briefly described along with conceptual engine design characteristics.

Cooper, L. P.↗
NASA NTRS1984

Results of the Purdue University GAS-1 payload

The Purdue University GAS-1 payload was flown on STS-7. Results of the three experiments included in the payload are summarized. The experiments conducted were: (1) the detection of nuclear particles in near-Earth space environment, (2) an investigation of the effect of microgravity on the germination of sunflower seeds, and (3) an examination of the motion of mercury under low gravity conditions. Results of the payload experiments are discussed from an engineering design standpoint. Data were obtained from one of the experiments, but electrical and mechanical malfunctions prevented the operation of the other two. The thermal control design maintained the desired temperatures and the structure successfully supported all components. The microprocessor collected and stored temperature readings and other data during the flight. A series of recommendations based on these results are included herein.

Perez, R.↗
NASA NTRS1983

Flat-plate solar array project: Experimental process system development unit for producing semiconductor-grade silicon using the silane-to-silicon process

The process technology for the manufacture of semiconductor-grade silicon in a large commercial plant by 1986, at a price less than $14 per kilogram of silicon based on 1975 dollars is discussed. The engineering design, installation, checkout, and operation of an Experimental Process System Development unit was discussed. Quality control of scaling-up the process and an economic analysis of product and production costs are discussed.

Source record↗
NASA NTRS1984

Synthesis of major economic studies of residential photovoltaics

Six studies that analyze the cost effectiveness of grid connected residential photovoltaic systems are reviewed. These six studies were selected based on two criteria. First, the reports share common emphases on developing photovoltaic systems with certain engineering design goals in mind, and on performing economic analyses to assess the long term economic potential of the system design. The economic analyses presented are performed from the consumer's perspective.

Source record↗
NASA NTRS1983

Laboratory experience with voltage breakdown

Voltage breakdown failures in photovoltaic module electrical insulations lead to loss of entire source circuits and require costly maintenance and replacement. Avoiding such catastrophes requires that modules be designed so that voltage breakdown either never occurs or occurs so rarely that it affects the least life cycle energy costs insignificantly. To achieve this desired balance of cost and reliability, the module design engineer must understand the failure mechanisms and use data on materials and failue rates to suppress or retard them. Recently obtained failure mechanism information, rate data and materials property data and a qualitative model of module failure prediction are presented.

Mon, G. R.↗
NASA NTRS1984

GROB G-112: Flight testing fulfills expectations

The G-112 aircraft built for exhibition exhibited at the ILA '84. The G-2500 engine designed especially for this purpose is economical, requires little maintenance and generates a power of 66 kW (90 Hp). The aircraft achieves a cruising speed of 185 km/h, using a drastically reduced amount of fuel, (only 17 liters aviation fuel or premium gasoline). This small two-seater requires only a very short takeoff and taxi run of about 250 meters.

Source record↗