Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “EXTRAPOLATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,711 records · Page 95
All sourcesNASA NTRSDOE OSTI
NASA NTRS1967

Report 2: First Application of the Successive Transformation Method

Report 1 of these studies described a basic method for predicting lunar surface temperatures, using readings recorded by Surveyor I and extrapolating to obtain surface temperatures in other selected areas. The areas selected were those considered as potential Apollo landing sites. This second report indicates that the temperature isotherms are directly related to the topographical profile of the surface areas they cover. If, after further observations by Surveyor 11, it becomes evident that the "Successive Transformation Method" provides accurate temperature data, this technique would become a valuable tool for charting the profile of any remote surface where manned spacecraft could be landed.

Rojas, Hector R.↗
NASA NTRS1967

Second Application of the "Successive Transformations Method" to Predict the Safest Lunar Landing Site for an Astronaut: Report 3

The purpose of the first application of the "Successive Transformations Method" described in the second report was to determine, for a manned spacecraft, the optimum landing site on the moon. The results obtained, made by extrapolating the temperature TO furnished by Surveyor, can be summarized as follows: (1) The method is efficient in allowing selection of the optimum landing area. ( 2 ) The zrea selected is extensive and relatively flat; consequently, it is sufficient to allow trine for the difficult landing operation which results from the high speed of the spacecraft when reaching the moon. ( 3 ) The relative temperature obtained is lower than that where Surveyor landed. In this third report, a second application of the "Successive Transformations" is described to determine the safest conditions of a given landing site for the astronaut, especially in relation to determining the composition of the lunar surface material. As a means of accomplishing this task, it is the intent of this paper to analyze lunar craters since they are present over so much of the lunar surface.

Rojas, Hector R.↗
NASA NTRS1974

Optical transfer function of NTS-1 retroreflector array

An optical transfer function was computed for the retroreflector array carried by the NTS-1 satellite. Range corrections are presented for extrapolating laser range measurements to the center of mass of the satellite. The gain function of the array was computed for use in estimating laser-echo signal strengths.

Arnold, D. A.↗
NASA NTRS1974

Statistical analysis of general aviation VG-VGH data

To represent the loads spectra of general aviation aircraft operating in the Continental United States, VG and VGH data collected since 1963 in eight operational categories were processed and analyzed. Adequacy of data sample and current operational categories, and parameter distributions required for valid data extrapolation were studied along with envelopes of equal probability of exceeding the normal load factor (n sub z) versus airspeed for gust and maneuver loads and the probability of exceeding current design maneuver, gust, and landing impact n sub z limits. The significant findings are included.

Clay, L. E.↗
NASA NTRS1973

Characteristics of Coupled Nongray Radiating Gas Flows with Ablation Product Effects About Blunt Bodies During Planetary Entries

A computational method was developed for the fully-coupled solution of nongray, radiating gas flows with ablation product effects about blunt bodies during planetary entries. The treatment of radiation accounts for molecular band, continuum, and atomic line transitions with a detailed frequency dependence of the absorption coefficient. The ablation of the entry body was solved as part of the solution for a steady-state ablation process. The method was applied by results at typical conditions during entry to Venus. The radiative heating rates along the downstream region of the body can exceed the stagnation point value. The radiative heating to the body is attenuated in the boundary layer at the downstream region of the body and at the stagnation point of the body. A study of the radiation, inviscid flow about spherically capped, conical bodies during planetary entries shows that the nondimensional, radiative heating distributions are nonsimilar with entry conditions. Caution should be exercised in attempting to extrapolate results from known distributions to other entry conditions for which solutions have not yet been obtained.

Sutton, K.↗
NASA NTRS1974

Data compression

An approach to data compression is discussed in which the effect achieved by compression is evaluated by the closeness of the approach to the minimum possible volume. An attempt is made to systematize the known results on data compression. The review contains: description of methods of data compression based on statistical coding and information theory; application of methods of interpolation and extrapolation; a specific compression method (related to description of the histogram of a sample); some criteria of effectiveness and methods of service information representation; and discussion of models suggested for theoretical analysis.

Babkin, V. F.↗
NASA NTRS1974

Microdosimetry and the radiation danger of cosmic rays

The radiation danger of space flights is due primarily to intensive proton fluxes accompanying solar flares and heavy multiple charged ions in galactic cosmic radiation. Evaluation of the biological effect of these kinds of rays is based on calculations of tissue dose, taking into account the formation of secondary radiation in shielding and tissue. The essential role in such calculations is played by the dependence of the factor of quality on linear energy transfer (LET) of these charged particles. Recommendations concerning the dependence of the quality factor on LET are based on radiobiological experiments carried out on many biological systems using various kinds of rays, including heavy ions with energies in the 1-10 Mev/nucleon range. Justification of the results of these experiments, as well as their extrapolation to other energies, requires development of a model description of the radiation effect of charged particles on biological microstructures.

Gunter, K.↗
NASA NTRS1975

Prediction of sonic boom from experimental near-field overpressure data. Volume 1: Method and results

A computerized procedure for predicting sonic boom from experimental near-field overpressure data has been developed. The procedure extrapolates near-field pressure signatures for a specified flight condition to the ground by the Thomas method. Near-field pressure signatures are interpolated from a data base of experimental pressure signatures. The program is an independently operated ODIN (Optimal Design Integration) program which obtains flight path information from other ODIN programs or from input.

Glatt, C. R.↗
NASA NTRS1974

Orbit-spectrum sharing between the fixed-satellite and broadcasting-satellite services with applications to 12 GHz domestic systems

A systematic, tutorial analysis of the general problem of orbit-spectrum sharing among inhomogeneous satellite system is presented. Emphasis is placed on extrapolating and applying the available data on rain attenuation and on reconciling differences in the results of various measurements of the subjective effects of interference on television picture quality. An analytic method is presented for determining the approximate values of the intersatellite spacings required to keep mutual interference levels within prescribed limits when many dissimilar satellites share the orbit. A computer model was developed for assessing the interference compatibility of arbitrary configurations of large numbers of geostationary satellite systems. It is concluded that the band from 11.7 c GHz can be shared effectively by broadcasting-satellite and fixed-satellite systems. Recommendations for future study are included.

Reinhart, E. E.↗
NASA NTRS1975

Optical transfer function of Starlette retroreflector array

An optical transfer function was computed for the retroreflector array carried by the Starlette satellite (1975 10A). The range correction is given for extrapolating laser range measurements to the center of mass of the satellite. The gain function and active reflecting area of the array are computed for estimating laser-echo signal strengths.

Arnold, D. A.↗
NASA NTRS1975

A study of carburetor/induction system icing in general aviation accidents

An assessment of the frequency and severity of carburetor/induction icing in general-aviation accidents was performed. The available literature and accident data from the National Transportation Safety Board were collected. A computer analysis of the accident data was performed. Between 65 and 90 accidents each year involve carburetor/induction system icing as a probable cause/factor. Under conditions conducive to carburetor/induction icing, between 50 and 70 percent of engine malfunction/failure accidents (exclusive of those due to fuel exhaustion) are due to carburetor/induction system icing. Since the evidence of such icing may not remain long after an accident, it is probable that the frequency of occurrence of such accidents is underestimated; therefore, some extrapolation of the data was conducted. The problem of carburetor/induction system icing is particularly acute for pilots with less than 1000 hours of total flying time. The severity of such accidents is about the same as any accident resulting from a forced landing or precautionary landing. About 144 persons, on the average, are exposed to death and injury each year in accidents involving carburetor/induction icing as a probable cause/factor.

Obermayer, R. W.↗
NASA NTRS1975

Project SOLWIND: Space radiation exposure

A special orbital radiation study was conducted for the SOLWIND project to evaluate mission-encountered energetic particle fluxes. Magnetic field calculations were performed with a current field model, extrapolated to the tentative spacecraft launch epoch with linear time terms. Orbital flux integrations for circular flight paths were performed with the latest proton and electron environment models, using new improved computational methods. Temporal variations in the ambient electron environment are considered and partially accounted for. Estimates of average energetic solar proton fluences are given for a one year mission duration at selected integral energies ranging from E greater than 10 to E greater than 100 MeV; the predicted annual fluence is found to relate to the period of maximum solar activity during the next solar cycle. The results are presented in graphical and tabular form; they are analyzed, explained, and discussed.

Stassinopoulos, E. G.↗
NASA NTRS1974

Entry aerodynamics and heating

An overview of the problems of entry aerodynamics and heating is given with emphasis on survival of the probe, predictability of performance, and reliability of performance. Technological challenges to performance prediction are considered and include: turbulent heat transfer, radiation blockage, chemical state of the shock layer, afterbody heat transfer, asymmetric ablation, and real-gas aerodynamics. It is indicated that various obstacles must be overcome in order to achieve technology readiness. These obstacles are considered to be: extrapolations from ground tests to flight; lack of flight experience; lack of parametric data; and uncertain knowledge of atmospherics.

Olstad, W.↗
NASA NTRS1974

Correlation parameters for the study of leeside heating on a lifting body at hypersonic speeds

Leeside heating was studied with the aim of gaining some insight into: (1) the magnitude of the leeside heating rates and (2) the methods to be used to extrapolate wind tunnel leeside heating rates to the full scale flight condition. This study was based on existing experimental data obtained in a hypersonic shock tunnel on lifting body configurations that are typical of shuttle orbiter vehicles. Heat transfer was first measured on the windward side to determine the boundary layer type. Then the leeside heating was investigated with the classified boundary layer. Correlation data are given on the windward turbulent boundary layer, the windward laminar boundary layer, and the leeside surfaces.

Vidal, R. J.↗
NASA NTRS1975

New methods for the numerical integration of ordinary differential equations and their application to the equations of motion of spacecraft

A number of hybrid methods for solving Cauchy problems are described on the basis of an evaluation of advantages of single and multiple-point numerical integration methods. The selection criterion is the principle of minimizing computer time. The methods discussed include the Nordsieck method, the Bulirsch-Stoer extrapolation method, and the method of recursive Taylor-Steffensen power series.

Banyukevich, A.↗
NASA NTRS1975

Critical flow and pressure ratio data for LOX flowing through nozzles

LOX and LN2 data for two-phase critical flow through nozzles were acquired with precision control. The principal measured parameters were inlet conditions, critical flow rate and critical flow pressure ratio. It is conclusively demonstrated that the principle of corresponding states can be applied to two-phase choked flow through nozzles. It is also shown that the proper normalizing parameters are developed, and that current theories can provide an adequate means for extrapolating data to other fluids.

Hendricks, R. C.↗
NASA NTRS1975

Study of the reaction of atomic oxygen with aerosols

The rate of disappearance of atomic oxygen was measured at several pressures in a fast flow pyrex reactor system with its walls treated with (NH4)2SO4 (s), H2SO4 (l), and NH4CL (s). Atomic oxygen, P-3 was generated by dissociation of pure, low pressure oxygen in a microwave discharge. Concentrations of atomic oxygen were measured at several stations in the reactor system using chemiluminescent titration with NO2. Recombination efficiencies calculated from experimentally determined wall recombination rate constants are in good agreement with reported values for clean Pyrex and an H2SO4 coated wall. The recombination efficiency for (NH4)2SO4, results in a slightly lower value than for H2S04. A rapid exothermic reaction between atomic oxygen and the NH4Cl wall coating prevented recombination efficiency determination for this coating. The results show that the technique is highly useful for wall recombination measurements and as a means of extrapolating to the case of free stream aerosol-gas interactions.

Akers, F. I.↗
NASA NTRS1975

Exhaust pollutant emissions from swirl-can combustor module arrays at parametric test conditions

Improved designs of swirl-can combustor modules were tested using seven-module arrays in a combustor. The combustor was operated over a pressure range of 69 to 207 N/sq cm, a fuel-air ratio range of 0.015 to 0.046, at a constant inlet air temperature of 733 K, and at reference velocities of 23.9 and 30.6 m/sec. The three designs tested performed with high combustion efficiency at all conditions tested and exhibited oxides of nitrogen emissions substantially lower than that of conventional gas turbine combustors. A correlating parameter used to extrapolate oxides of nitrogen emissions to full power or takeoff conditions for large commercial turbofan engines predicts oxides of nitrogen emissions somewhat higher than those specified in the 1979 government emissions standards.

Mularz, E. J.↗