Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Diodes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,711 records · Page 95

GaN/InGaN Blue Light-Emitting Diodes on Polycrystalline Molybdenum Metal Foils by Ion Beam-Assisted Deposition

Light-emitting diode (LED) arrays fabricated on a polycrystalline metal substrate are demonstrated using a novel technique that enables the growth of epitaxial metal-organic chemical vapor deposition (MOCVD) GaN layers on non-single-crystal substrates. Epitaxial GaN is deposited directly on metal foil using an intermediate ion beam-assisted deposition (IBAD) aligned layer. For a single 170 μm-diameter LED on the metal foil, electroluminescence (EL) spectrum shows a peak wavelength of ≈452 nm and a full width at half maximum (FWHM) of ≈24 nm. The current–voltage (I –V ) characteristics show a turn-on voltage of 3.7 V, a series resistance of 10 Ω. LEDs on metal show a relative external quantum efficiency (EQE) that is roughly 3× lower than that of similar LEDs fabricated on a sapphire substrate. Finally, InGaN LEDs on large-area non-single-crystal substrates such as metal foils enable large-area manufacturing, reducing production cost, and opening the door for new applications in lighting and displays.

36 MATERIALS SCIENCE↗

Temperature Effects on the Optical Parameters of a Passively Q-Switched Diode-Side Pumped Yb,Er-Laser

Temperature effects on photoluminescence and absorption spectra of the active medium (LGS-DE erbium phosphate glass) and passive Q-switch (MgAl{sub 2}O{sub 4}:Co{sup 2+} crystal) of a diode-side pumped Yb,Er-laser are studied. The obtained data are applied to an analysis of the spectral and energetic characteristics of compact erbium emitters. It is established that the dominant generation channel in the temperature range 233–328 K is the optical transition between lower Stark sublevels of Er{sup 3+} states {sup 4}I{sub 13/2} and {sup 4}I{sub 15/2} (λ = 1532.0–1533.9 nm). A rate-equation system taking into account thermal population of Stark sublevels of states {sup 4}I{sub 13/2} and {sup 4}I{sub 15/2} is proposed to describe the experimental temperature dependence of the threshold absorbed power of the pumping radiation. This system and the lasing threshold enable modeling of Yb,Er-emitter output energetic and temporal characteristics.

36 MATERIALS SCIENCE↗

Josephson Fluxonic Diode as a Pixel with Radiation Pumping of Fluxons in Gigahertz Imaging Systems

Josephson fluxonic diode (JFD) has been studied and applied for gigahertz (GHz) imaging using the principle of generation of fluxons by an irradiated standing wave at gigahertz frequencies. In this device, the creation, movement, and dynamics of fluxon and anti-fluxon pairs as the magnetic field carriers in JFD have been examined in two separate modes of operation including forward and reverse bias. In both modes, the high nonlinearity feature is used for electromagnetic radiation detection. To verify this capability, an experimentally fabricated JFD based on Nb/AlO{sub x}/Nb trilayer technology has been deployed without being coupled to any patterned antenna or frontal optics. Also, the junction design parameters and DC biasing values have accordingly been chosen to achieve the best sensitivity to gigahertz radiations. As a result, the device well respond to the specified frequency, and an image is acquired at 71 GHz which proves the potential application of JFD as a pixel of the millimeter wave imaging systems with the direct detection mechanism.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Modeling mode competition in laser diodes

We present an advanced model for the simulation of laser dynamics based on the microscopic many-particle equations of motion and going beyond the often used rate equation model. Our model is used to simulate (Al,In)GaN based edge-emitting laser diodes showing longitudinal mode-competition phenomena which are responsible for the effect of mode hopping, i.e. the modes are switched on and off causing mode rolling from higher to lower frequencies. We show that the effect is caused by beating vibrations of the carrier density which result in an asymmetric coupling term between neighboring modes. Here, the results agree with the case where we assume that the coupling of two modes is independent of all the other modes, as long as the mode frequencies are not equidistant. If the mode frequencies are equidistant, the mode dynamics depend strongly on the initial phases and the initial noise.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Simulation and design of a compact GaAs based tunable dual-wavelength diode laser system

We present our design of a compact, integrated and tunable dual-wavelength diode laser system emitting around 785 nm, which is of interest for several applications like Raman spectroscopy and the generation of THz radiation. To achieve a more compact device compared to previous GaAs based designs two etch depths are realized, leading to shallowly etched ridge waveguides in regions were optical gain is applied and deeply etched waveguides used to enable compact integrated waveguide components. The device parameters are optimized using a numerically efficient simulation tool for passive waveguides. Subsequently, the entire laser system is further analyzed applying a sophisticated traveling-wave equation based model for active devices giving access to internal intensity and carrier density distributions. It is shown that active laser simulations are crucial to deduce critical and performance limiting design aspects not accessible via an all-passive simulation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Formation of Sub-Millimeter-Size Powerful X-Ray Sources in Low-Impedance Rod-Pinch Diodes

In the paper, experiments on the formation of a low-impedance diode and a focused electron beam as a result of detachment of radial wires, accelerated by the current of a high-current generator, from the rod anode have been described. In the experiments, along with studies of conditions for compact focusing of the electron beam and effective generation of hard x-rays, the shape of the tip of the anode rod is determined at which the x-ray source is point-sized when viewed in the radial direction.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Optical parameters of diode lasers based on an InAsSb/InAsSbP heterostructure

The rates of radiative recombination (including transitions induced by enhanced luminescence) and nonradiative recombination, internal quantum yield of luminescence, and the matrix element for band-to-band optical transitions were determined for the first time for InAsSb/InAsSbP diode lasers oscillating at wavelengths of 3.1-3.2 {mu}m. It is established that the contribution of nonradiative recombination to the lasing threshold can be as large as 97%. The internal quantum yield of luminescence for the InAs{sub 0.97}Sb{sub 0.03} compound is no higher than 3%. Most likely, the nonradiative channel is formed with involvement of Auger recombination with the constant C = 4.2 x 10{sup -38} m{sup 6}s{sup -1} (T = 77 K). The studied samples of lasers feature relatively low optical losses {rho} = 900 m{sup -1} and internal quantum efficiency of emission at the level of 0.6. The spontaneous lifetime of nonequilibrium charge carriers as determined from the radiative-recombination rate is equal to 6 x 10{sup -8} s, which is consistent with known published data.

36 MATERIALS SCIENCE↗

Enhanced diode-like operation mediated by an asymmetric non-Hermitian and nonlinear defect

In this work we study the nonreciprocal transport along two tight-binding chains which are connected by a single defect having an asymmetric non-Hermitian nonlinear off-diagonal coupling. The spectrum of transmission and reflection, the gain curve and the rectifying factor are analytically obtained using a backward iterative process. A set of discrete linear Schroedinger equations is used to model the wave propagation through the two Hermitian side chains, while a discrete nonlinear Ablowitz–Ladik equation governs their coupling by the single defect. We show that the emergence of a multistability window induced by the non-linear contribution, together with the biased transport promoted by a parity-breaking non-Hermiticity, generates an efficient rectification of the transmitted wave component. - Highlights: • Transmission along a quantum channel with a defect is analytically studied. • The defect has non-Hermitian, nonlinear and non-symmetric characteristics. • The transmission spectrum exhibits multistability regions. • The non-conventional properties of the defect lead to a diode-like behavior. • Multistability is shown to promote an enhanced rectification of the transmitted signal.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Dye doped concentric shell nanoparticles for enhanced photophysical performance of downconverting light emitting diodes

In this study, we examined the potential for perylene dye doped nanoparticles to enhance Light Emitting Diodes (LED) efficacy by minimizing π–π intermolecular aggregation, and enhancing photoluminescence and photostability of the dye molecules in the solid state. Towards this end, we encapsulated perylene dyes, suitably modified with a reactive silica precursor, into silica nanoparticles within a silica-dye-silica concentric layered shell. We found that the fluorescent yield was higher when the dye was embedded in a buried concentric shell within the silica nanoparticles (NPs) compared to an undoped shell/dye doped core nanoparticle morphology or unencapsulated dye with the same net dye concentration in solution. A strong dependence of relative quantum yield on dye doping concentration in the silica-dye-silica nanoparticles was observed. The uniform ~ 100 nm large silica-dye-silica layered nanoparticles were used to prepare transparent dye doped silica nanoparticle/silicone nanocomposites. Dye doped silica nanoparticle/silicone nanocomposites exhibited higher photostability than the unencapsulated dye samples during long time aging tests under a blue LED with a wavelength of 455 nm at 300 ± 3% mA for 24 h. Novel dye doped layered silica NPs and their nanocomposites offer scope for developing organic luminescent materials into efficient and color-tunable light emitters for low-cost display, lighting, and optical communication applications.

42 ENGINEERING↗

Quinolyl functionalized spiro[fluorene-9,9'-xanthene] host materials with bipolar characteristics for green and red phosphorescent organic light-emitting diodes

Spiro[fluorene-9,9'-xanthene] (SFX) bipolar hosts bearing one, two and three quinolyl substituents, namely SFX-bPy, SFX-DbPy and SFX-TbPy, were designed and synthesized for phosphorescent organic light emitting diodes (PhOLEDs). The successive substitution of quinoline at 2', 2 and 7' positions of SFX results in reduced LUMO energy levels while leaving the HOMO energy levels nearly intact. The impact of quinoline substitution in these SFX-based hosts on PhOLED performance was investigated in detail through green and red model devices. For the green emitting devices, the device based on SFX-bPy host showed better performance (23.6 cd A -1 , 23.4 lm W -1 , 6.3%) due to high triplet energy level ( T 1 ) and balanced carriers-transporting ability. In contrast, for the red PhOLED devices, the device hosted by SFX-DbPy displayed higher performance (15.8 cd A -1 , 16.0 lm W -1 , 9.1%), attributable to the well matched T 1 and separated frontier molecular orbitals. This work thus sheds light on the rational design of SFX-based bipolar hosts for more efficient PhOLEDs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Colloidal cobalt-doped ZnO nanoparticles by microwave-assisted synthesis and their utilization in thin composite layers with MEH-PPV as an electroluminescent material for polymer light emitting diodes

In this study, Co x Zn 1-x O (x = 0.01, 0.05 and 0.1) nanoparticles were prepared by microwave-assisted polyol method from zinc acetate dihydrate and Co(II) acetylacetonate. The reactions were performed in diethylene glycol (DEG) at 250 °C with the use of oleic acid as a surfactant. Resulting nanoparticle (ca. 10 nm) precipitates were washed with methanol and dried or kept as colloidal solutions redispersed in toluene. Colloidal solutions were mixed with the Poly [2-methoxy-5-(2-ethylhexyloxy)-1,4-phenylenevinylene] (MEH-PPV) polymer to produce thin nanocomposite layers with specific optoelectronic properties. The electronic structure in terms of density of states (DOS) of MEH-PPV and MEH-PPV/nanocomposite layers was investigated by recently proposed energy resolved electrochemical impedance spectroscopy method. The MEH-PPV polymer and its nanocomposites with ZnO or Co x Zn 1-x O nanoparticles were used as thin active layers in polymer light emitting diodes (PLED). The nanocomposite layers exhibited optoelectronic properties which were found to be beneficial as the active layer in PLEDs, exhibiting an order of magnitude enhancement in electroluminescence intensity. Finally, a pronounced effect on the opening bias voltage of final devices with Co x Zn 1-x O nanoparticles was also observed.

36 MATERIALS SCIENCE↗

Green solvent-processable poly(3-hexylthiophene) derivative maintains high hole mobility in diodes

The development of environmentally sustainable fabrication methods for organic solar cells (OSCs) is critical to enable their large-scale adoption. Conventional solution-processed OSCs often rely on halogenated, toxic solvents that pose health and environmental risks, limiting their scalability. This is because π-conjugated polymers tend to have a low solubility in non-halogenated solvents. A common strategy to enhance solubility in alternative solvents is through the incorporation of polar solubilizing groups, often on every repeat unit of at least one monomer. However, too many polar side chains tend to disrupt favorable morphology and decrease charge transport properties. In this study, we demonstrate that a minimal degree of side chain functionalization can improve green solvent processability while preserving electrical performance. We tested this hypothesis using our previously reported random copolymer derivative of poly(3-hexylthiophene) (P3HT) where ∼10 mol% of the side chains are 6-pentanoatehexyl side chains. We find that this low-level functionalization significantly broadens the solvents that can be used to process P3HT to less toxic solvents such as o-xylene and anisole. Furthermore, the copolymer processed from greener solvents showed high hole mobilities (∼10⁻ 3 cm 2 /Vs by the Space-Charge Limiting Current method in diodes), comparable to P3HT films cast from toxic chloroform. These findings suggest that minimal side-chain modification is a viable strategy for expanding green solvent compatibility while preserving electrical performance, paving the way toward more sustainable organic semiconductor designs.

36 MATERIALS SCIENCE↗

Scaling diode-pumped, high energy picosecond lasers to kilowatt average powers

Recent results in the development of diode-driven high energy, high repetition rate, picosecond lasers, including the demonstration of a cryogenic Yb:YAG active mirror amplifier that produces 1.5 J pulses at 500 Hz repetition rate (0.75 kW average power) are reviewed. These pulses are compressed resulting in the generation of ${\sim}5~\text{ps}$ duration, 1 J pulses with 0.5 kW average power. A full characterization of this high power cryogenic amplifier, including at-wavelength interferometry of the active region under ${>}1~\text{kW}$ average power pump conditions, is presented. An initial demonstration of operation at 1 kW average power (1 J, 1 kHz) is reported.

47 OTHER INSTRUMENTATION↗

Colloidal Semiconductor Nanocrystal Lasers and Laser Diodes

Lasers and optical amplifiers based on solution-processable materials have been long-desired devices for their compatibility with virtually any substrate, scalability, and ease of integration with on-chip photonics and electronics. These devices have been pursued across a wide range of materials including polymers, small molecules, perovskites, and chemically prepared colloidal semiconductor nanocrystals, also commonly referred to as colloidal quantum dots. The latter materials are especially attractive for implementing optical-gain media as in addition to being compatible with inexpensive and easily scalable chemical techniques, they offer multiple advantages derived from a zero-dimensional character of their electronic states. These include a size-tunable emission wavelength, low optical gain thresholds, and weak sensitivity of lasing characteristics to variations in temperature. Here we review the status of colloidal nanocrystal lasing devices, most recent advances in this field, outstanding challenges, and the ongoing progress toward technological viable devices including colloidal quantum dot laser diodes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Unraveling the Fate of Host Excitons in Host-Guest Phosphorescent Organic Light-Emitting Diodes

Understanding energy and charge transfer mechanisms in host-guest systems is crucial for improving performance of organic light-emitting diodes (OLEDs), but it presents a theoretical challenge due to disordered molecular environment. Here, we address the fate of excitons that form on the host in a BTDF-Ir(ppy) 3 phosphorescent OLED through a QM/MM simulation. Our results demonstrate that triplet host excitons can be harvested through efficient energy transfer to the T 1 state of the guest allowed by excellent spectral overlap. Detailed analysis of the guest absorption spectrum uncovers that high-lying guest singlet states play a critical role in utilizing singlet host excitons. Furthermore, we investigate the process where host excitons break up and reform on the guest, and show it is unfavored owing to the high energy barrier. This work thus reveals energy transfer is the primary quenching mechanism for host excitons and highlights strategies for better host-guest design.

36 MATERIALS SCIENCE↗

Structural Investigation of Cesium Lead Halide Perovskites for High-Efficiency Quantum Dot Light-Emitting Diodes

We have investigated the effect of reaction temperature of hot-injection method on the structural properties of CsPbX3 (X: Br, I, Cl) perovskite nanocrystals (NCs) using the small- and wide-angle X-ray scattering. It is confirmed that the size of the NCs decreased as the reaction temperature decreased, resulting stronger quantum confinement. The cubic-phase perovskite NCs were formed despite the reaction temperatures increased from 140 to 180 °C. However, monodispersive NC cubes which are required for densely packing self-assembly film were only formed at lower temperatures. From the X-ray scattering measurements, the spin-coated film from more monodispersive perovskite nanocubes synthesized at lower temperatures resulted in more preferred orientation. This dense-packing perovskite film with preferred orientation yielded efficient light-emitting diode (LED) performance. Thus, the dense-packing structure of NC assemblies formed after spin-coating should be considered for high-efficient LEDs based on perovskite quantum dots in addition to quantum confinement effect of the quantum dots.

Le, Quyet Van↗

Thermal Properties of Polymer Hole-Transport Layers Influence the Efficiency Roll-off and Stability of Perovskite Light-Emitting Diodes

While the performance of metal halide perovskite light-emitting diodes (PeLEDs) has rapidly improved in recent years, their stability remains a bottleneck to commercial realization. Here, we show that the thermal stability of polymer hole-transport layers (HTLs) used in PeLEDs represents an important factor influencing the external quantum efficiency (EQE) roll-off and device lifetime. We demonstrate a reduced EQE roll-off, a higher breakdown current density of approximately 6 A cm -2 , a maximum radiance of 760 W sr -1 m -2 , and a longer device lifetime for PeLEDs using polymer HTLs with high glass-transition temperatures. Furthermore, for devices driven by nanosecond electrical pulses, a record high radiance of 1.23 MW sr -1 m -2 and an EQE of approximately 1.92% at 14.6 kA cm -2 are achieved. Thermally stable polymer HTLs enable stable operation of PeLEDs that can sustain more than 11.7 million electrical pulses at 1 kA cm -2 before device failure.

14 SOLAR ENERGY↗

Red-Light-Driven Biophotochemical Diode Based on a Microorganism–Silicon Nanowire Interface for Stable and Efficient Bias-Free CO 2 Reduction

Artificial photosynthesis offers a promising route for sustainable liquid fuel and feedstock production, yet integrating efficient CO 2 reduction catalysts with light-harvesting systems remains challenging. Here, in this study, we present a biophotochemical diode that couples microorganism-driven CO 2 reduction with glycerol oxidation, enabled by silicon nanowire photoelectrodes under varying red-light intensities. Tuning the biotic-abiotic interface─by increasing biocatalyst loading and adjusting the catholyte pH to mitigate local alkalization─significantly improves performance and stability. The enhanced-loading biocathode maintains a high faradaic efficiency across a wide potential range, even under elevated light intensities. At 60 mW/cm 2 , the system achieves a bias-free current density of 3.5 mA/cm 2 . Long-term stability testing at 40 mW/cm 2 demonstrates stable operation for over 100 h. The photoanode generates valuable C 3 products, primarily glycerate and lactate, enhancing the economic viability. This work showcases the importance of microenvironmental control at the biotic-abiotic interface and establishes a scalable platform for light-driven CO 2 reduction using earth-abundant silicon.

Artificial Photosynthesis↗