Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Data Plotting”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,711 records · Page 95
All sourcesNASA NTRSDOE OSTI
NASA NTRS1992

Preliminary efforts toward development of data handling and analysis software for unsteady flow measurements: An application for aeroelastic transonic flow configurations

A few years ago the Structural Dynamics Division at LaRC started ambitious experimental research efforts known as the Benchmark Models Program. The primary objective of this program was to provide experimental data that may serve as a calibration source for computational fluid dynamics (CFD) efforts that deal with aeroelastic unsteady flow configurations. It also focuses on the understanding of complex flow phenomenon associated with unsteady flow developments. The overall plan for the program has been described by Bennett, including a presentation of initial test results of flutter of a rigid wing mounted on flexible supports. An example of a test model employed to measure the dynamic response along with corresponding pressure distributions is shown. This model incorporates eighty pressure transducers distributed along two spanwise stations. In addition, the models are equipped with four accelerometers and two strain gages. The data handling system for the Benchmark Model Program is under development. Several interactive computer routines designed for the user interface, dynamic memory allocation, unsteady flow measurements data extraction, and further data processing were developed. To present a few examples of measured data, the unsteady pressure distributions and the wing model dynamic response were plotted.

Finaish, Fathi↗
NASA NTRS1940

Correlation of knocking characteristics of fuels in an engine having a hemispherical combustion chamber

Data are presented to show the effects of inlet-air pressure, inlet-air temperature, and compression ratio on the maximum permissible performance obtained with having a hemispherical-dome combustion chamber. The five aircraft-engine fuels used have octane numbers varying from 90 to 100 plus 2 ml of tetraethyl lead per gallon. The data were obtained on a 5 1/4-inch by 4 3/4-inch liquid-cooled engine operating at 2,500 r.p.m. The compression ratio was varied from 6.0 to 8.9. The inlet-air temperature was varied from 110 to 310 F. For each set of conditions, the inlet-air pressure was increased until audible knock occurred and then reduced 2 inches of mercury before data were recorded. The results for each fuel can be correlated by plotting the calculated end-gas density factor against the calculated end-gas temperature. Measurements of spark-plugs, cutting off the switch to one spark plug lowered the electrode temperature of that plug from a value of 1,365 F to a value of 957 F. The results indicate that the surface temperatures of combustion-chamber areas which become new sources of ignition markedly increase after ignition.

Rothrock, A M↗
NASA NTRS2006

Program Predicts Performance of Optical Parametric Oscillators

A computer program predicts the performances of solid-state lasers that operate at wavelengths from ultraviolet through mid-infrared and that comprise various combinations of stable and unstable resonators, optical parametric oscillators (OPOs), and sum-frequency generators (SFGs), including second-harmonic generators (SHGs). The input to the program describes the signal, idler, and pump beams; the SFG and OPO crystals; and the laser geometry. The program calculates the electric fields of the idler, pump, and output beams at three locations (inside the laser resonator, just outside the input mirror, and just outside the output mirror) as functions of time for the duration of the pump beam. For each beam, the electric field is used to calculate the fluence at the output mirror, plus summary parameters that include the centroid location, the radius of curvature of the wavefront leaving through the output mirror, the location and size of the beam waist, and a quantity known, variously, as a propagation constant or beam-quality factor. The program provides a typical Windows interface for entering data and selecting files. The program can include as many as six plot windows, each containing four graphs.

Cross, Patricia L.↗
NASA NTRS1961

Cavitation Performance of a Centrifugal Pump with Water and Mercury

The cavitation performance of a given centrifugal pump with water (hot and cold) and mercury is compared. It is found that there are significant scale effects with all fluids tested, with the Thoma cavitation parameter decreasing in all cases for increased pump speed or fluid Reynolds' number. The data for a fixed flow coefficient fall into a single curve when plotted against pump speed (or fluid velocity), rather than against Reynolds' number. Conversely, the Thoma parameter for a given Reynolds' number is approximately twice as large for mercury as for water. The direction of this variation is as predicted from consideration of the cavitation thermodynamic parameters which vary by a factor of 10(exp 7) between these fluids. No difference in cavitation performance between hot and cold water (approximately 160 F and 80 F) was observed, However, the thermodynamic parameters vary only by a factor of 5.

Hammitt, F. G.↗
NASA NTRS2014

An Efficient, Multi-Layered Crown Delineation Algorithm for Mapping Individual Tree Structure Across Multiple Ecosystems

Deriving individual tree information from discrete return, small footprint LiDAR data may improve forest above ground biomass estimates, and provide tree-level information that is important in many ecological studies. Several crown delineation algorithms have been developed to extract individual tree information from LiDAR point clouds or rasterized canopy height models (CHM), but many of these algorithms have difficulty discriminating between overlapping crowns, and also may fail to detect understory trees. Our approach uses a watershed based delineation of a CHM, which is subsequently refined using the LiDAR point cloud. Individual tree detection was validated with stem mapped field data from the Smithsonian Environmental Research Center (SERC), Maryland, and on a plot and stand level through comparisons of stem density and basal area to delineated metrics at both SERC and a study area in the Sierra Nevada, California. For individual tree detection, the algorithm correctly identified 70% of dominant trees, 58% of co-dominant trees, 35% of intermediate trees and 21% of suppressed trees at SERC. The algorithm had difficulty distinguishing between crowns of small, dense understory trees of approximately the same height. Delineated crown volume alone explained 53% and 84% of the variability in basal area at the SERC and Sierra Nevada sites, respectively. The algorithm produced crown area distributions comparable to diameter at breast height (DBH) size class distributions observed in the field in both study sites. The algorithm detected understory crowns better in the conifer-dominated Sierra Nevada site than in the closed-canopy deciduous site in Maryland. The ability for the algorithm to reproduce both accurate tree size distributions and individual crown geometries in two dissimilar and complex forests suggests great promise for applicability to a wide range of forest systems.

LiDAR↗
DOE OSTI2025

Integrated Hourly Meteorological Database of 20 Meteorological Stations (1981-2022) for Watershed Function SFA Hydrological Modeling

This dataset contains (a) a script “R_met_integrated_for_modeling.R”, and (b) associated input CSV files: 3 CSV files per location to create a 5-variable integrated meteorological dataset file (air temperature, precipitation, wind speed, relative humidity, and solar radiation) for 19 meteorological stations and 1 location within Trail Creek from the modeling team within the East River Community Observatory as part of the Watershed Function Scientific Focus Area (SFA). As meteorological forcings varied across the watershed, a high-frequency database is needed to ensure consistency in the data analysis and modeling. We evaluated several data sources, including gridded meteorological products and field data from meteorological stations. We determined that our modeling efforts required multiple data sources to meet all their needs. As output, this dataset contains (c) a single CSV data file (*_1981-2022.csv) for each location (20 CSV output files total) containing hourly time series data for 1981 to 2022 and (d) five PNG files of time series and density plots for each variable per location (100 PNG files). Detailed location metadata is contained within the Integrated_Met_Database_Locations.csv file for each point location included within this dataset, obtained from Varadharajan et al., 2023 doi:10.15485/1660962. This dataset also includes (e) a file-level metadata (flmd.csv) file that lists each file contained in the dataset with associated metadata and (f) a data dictionary (dd.csv) file that contains column/row headers used throughout the files along with a definition, units, and data type. Review the (g) ReadMe_Integrated_Met_Database.pdf file for additional details on the script, methods, and structure of the dataset.The script integrates Northwest Alliance for Computational Science and Engineering’s PRISM gridded data product, National Oceanic and Atmospheric Administration’s NCEP-NCAR Reanalysis 1 gridded data product (through the `RCNEP` R package, Kemp et al., doi:10.32614/CRAN.package.RNCEP), and analytical-based calculations. Further, this script downscales the input data into hourly frequency, which is necessary for the modeling efforts.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1983

Detecting agricultural to urban land use change from multi-temporal MSS digital data

Conversion of agricultural land to a variety of urban uses is a major problem along the Wasatch Front, Utah. Although LANDSAT MSS data is a relatively coarse tool for discriminating categories of change in urban-size plots, its availability prompts a thorough test of its power to detect change. The procedures being applied to a test area in Salt Lake County, Utah, where the land conversion problem is acute are presented. The identity of land uses before and after conversion was determined and digital procedures for doing so were compared. Several algorithms were compared, utilizing both raw data and preprocessed data. Verification of results involved high quality color infrared photography and field observation. Two data sets were digitally registered, specific change categories internally identified in the software, results tabulated by computer, and change maps printed at 1:24,000 scale.

Ridd, M. K.↗
DOE OSTI2023

Duke Forest FACE (FACTS-I): Plant and Soil Response Data

This dataset describing the responses of plant and soil pools and fluxes to elevated atmospheric CO2 concentration and increased nitrogen supply was collected from Duke Forest Free Air CO2 Enrichment (FACE) – Forest-Atmosphere Carbon Transfer and Storage (FACTS-I) experiment from 1996 to 2012. The dataset includes data files for allometry (diameter at breast height, tree height, and height to live crown base), leaf area index, biomass (stem, branch, foliage, and root biomass, tree density, and basal area), net primary productivity (stem, branch, foliage, reproductive, and coarse root NPP), sap flux density, soil CO2 efflux, and stem temperature. Data files were formatted as .csv (Microsoft Excel or other spreadsheet programs can be used to read the format) and file descriptions, including variable name, unit, and data range, can be found in ‘FileDescription_[data_name].txt’ files. The Duke FACE experiment was in a loblolly pine (Pinus taeda L.) plantation established in 1983. Naturally regenerated broadleaved species including sweetgum (Liquidambar styraciflua L.) and tulip poplar (Liriodendron tulipifera L.), mostly in the overstory, and winged elm (Ulmus alata Michx.) and red maple (Acer rubrum L.) were common in the understory. The FACE experiment commenced with two plots (plots 7-8) in 1994 (Oren et al. 2001), with six additional plots (plots 1-6) coming online on 27 August 1996. CO2 enrichment was terminated on 31 October 2010 and post-enrichment data collection continued through 2012. Complete fertilization was applied annually to half of plots 7-8 from 1998 to 2004. The nutrient addition experiment expanded to half of plots 1-6 with a common protocol of N-fertilization in 2005 and continued until 2012. The levels of treatment in this dataset were expressed as ambient CO2 (AMB) or elevated CO2 (ELE) for CO2 treatment and control soil (CONT) or fertilized soil (FERT) for N treatment, respectively.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1970

A computer-controlled scintiscanning system and associated computer graphic techniques for study of regional distribution of blood flow.

Two methods whereby a digital computer may be used to regulate a scintiscanning process are discussed from the viewpoint of computer input-output software. The computer's function, in this case, is to govern the data acquisition and storage, and to display the results to the investigator in a meaningful manner, both during and subsequent to the scanning process. Several methods (such as three-dimensional maps, contour plots, and wall-reflection maps) have been developed by means of which the computer can graphically display the data on-line, for real-time monitoring purposes, during the scanning procedure and subsequently for detailed analysis of the data obtained. A computer-governed method for converting scintiscan data recorded over the dorsal or ventral surfaces of the thorax into fractions of pulmonary blood flow traversing the right and left lungs is presented.

Coulam, C. M.↗
NASA NTRS1979

Synthesis of rotor test data for real-time simulation

A mathematical model of a hingeless tilting rotor is presented. The model was obtained by a systematic curve fit procedure applied to an extensive set of model scale wind tunnel data. The math model equations were used in a real time flight simulation model of a hingeless tilt rotor XV-15 to assess changes in flying qualities compared to those obtained using a previous rotor model. Extensive plots of the rotor derivatives are given. Discussions of attempts to apply multivariable linear regression technqiues to the data and the use of an analytical rotor representation are included.

Mcveigh, M. A.↗
DOE OSTI2022

Hyperspectral remote sensing-based plant community map for region around NGEE-Arctic intensive research watersheds at Seward Peninsula, Alaska, 2017-2019

Using airborne hyperspectral remote sensing data from NASA Airborne Visible-Infrared Imaging Spectrometer- Next Generation (AVIRIS-NG) platforms in a region near NGEE-Arctic intensive watersheds at Seward peninsula of Alaska, high resolution (5m) maps of plant community distribution were developed and included in this data collected. AVIRIS-NG data collected over 2017-2019 period were used to develop deep neural networks, trained using vegetation plot observations collected at NGEE-Arctic watersheds at Kougarok, Council and Teller. A hierarchical vegetation classification scheme consisting of six classes at Level I, and 16 classes at Level II contained in two .txt files were used to developed the plant community maps for the region. Two geospatial raster data files (.tif) at both thematic levels are shared in this data collection. Data files in this collection use Alaska Albers Equal Area projection. Readme files available in three formats (*.html, *.md, *.pdf) and one *.png visualization map.The Next-Generation Ecosystem Experiments: Arctic (NGEE Arctic), was a research effort to reduce uncertainty in Earth System Models by developing a predictive understanding of carbon-rich Arctic ecosystems and feedbacks to climate. NGEE Arctic was supported by the Department of Energy's Office of Biological and Environmental Research.The NGEE Arctic project had two field research sites: 1) located within the Arctic polygonal tundra coastal region on the Barrow Environmental Observatory (BEO) and the North Slope near Utqiagvik (Barrow), Alaska and 2) multiple areas on the discontinuous permafrost region of the Seward Peninsula north of Nome, Alaska.Through observations, experiments, and synthesis with existing datasets, NGEE Arctic provided an enhanced knowledge base for multi-scale modeling and contributed to improved process representation at global pan-Arctic scales within the Department of Energy's Earth system Model (the Energy Exascale Earth System Model, or E3SM), and specifically within the E3SM Land Model component (ELM).

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2006

X-Windows PVT Widget Class

The X-Windows Process Validation Table (PVT) Widget Class ( Class is used here in the object-oriented-programming sense of the word) was devised to simplify the task of implementing network registration services for Information Sharing Protocol (ISP) graphical-user-interface (GUI) computer programs. Heretofore, ISP PVT programming tasks have required many method calls to identify, query, and interpret the connections and messages exchanged between a client and a PVT server. Normally, programmers have utilized direct access to UNIX socket libraries to implement the PVT protocol queries, necessitating the use of many lines of source code to perform frequent tasks. Now, the X-Windows PVT Widget Class encapsulates ISP client server network registration management tasks within the framework of an X Windows widget. Use of the widget framework enables an X Windows GUI program to interact with PVT services in an abstract way and in the same manner as that of other graphical widgets, making it easier to program PVT clients. Wrapping the PVT services inside the widget framework enables a programmer to treat a PVT server interface as though it were a GUI. Moreover, an alternate subclass could implement another service in a widget of the same type. This program was written by Matthew R. Barry of United Space Alliance for Johnson Space Center. For further information, contact the Johnson Technology Transfer Office at (281) 483-3809. MSC-23582 Shuttle Data Center File- Processing Tool in Java A Java-language computer program has been written to facilitate mining of data in files in the Shuttle Data Center (SDC) archives. This program can be executed on a variety of workstations or via Web-browser programs. This program is partly similar to prior C-language programs used for the same purpose, while differing from those programs in that it exploits the platform-neutrality of Java in implementing several features that are important for analysis of large sets of time-series data. The program supports regular expression queries of SDC archive files, reads the files, interleaves the time-stamped samples according to a chosen output, then transforms the results into that format. A user can choose among a variety of output file formats that are useful for diverse purposes, including plotting, Markov modeling, multivariate density estimation, and wavelet multiresolution analysis, as well as for playback of data in support of simulation and testing.

Barry, Matthew R.↗
NASA NTRS2006

Shuttle Data Center File-Processing Tool in Java

A Java-language computer program has been written to facilitate mining of data in files in the Shuttle Data Center (SDC) archives. This program can be executed on a variety of workstations or via Web-browser programs. This program is partly similar to prior C-language programs used for the same purpose, while differing from those programs in that it exploits the platform-neutrality of Java in implementing several features that are important for analysis of large sets of time-series data. The program supports regular expression queries of SDC archive files, reads the files, interleaves the time-stamped samples according to a chosen output, then transforms the results into that format. A user can choose among a variety of output file formats that are useful for diverse purposes, including plotting, Markov modeling, multivariate density estimation, and wavelet multiresolution analysis, as well as for playback of data in support of simulation and testing.

Barry, Matthew R.↗
DOE OSTI2024

Vegetation Warming Experiment: Leaf Mass Area, Leaf Carbon and Nitrogen Content, Utqiagvik (Barrow), Alaska, 2017

Leaf mass per area (LMA), leaf carbon and nitrogen content of vegetation (Petasites frigidus) within warming chambers and paired control plots. See related datasets for plant physiology, phenology and environmental conditions. The files included in this data package are in .csv format, and include 2 data files and 4 metadata files.These data were collected in 2017 as part of a series of single-season warming experiments on tundra vegetation on the Barrow Environmental Observatory (BEO), Utqiagvik, Alaska. A different plant species was targeted each year, over four experimental years from 2017–2021. Each year, five warming chambers and paired ambient control plots were deployed from around the time of snowmelt in mid-June through to mid-September. Average seasonal warming of 3–4°C was achieved using Zero Power Warming (ZPW) chambers (Lewin et al, 2017). The Next-Generation Ecosystem Experiments: Arctic (NGEE Arctic), was a research effort to reduce uncertainty in Earth System Models by developing a predictive understanding of carbon-rich Arctic ecosystems and feedbacks to climate. NGEE Arctic was supported by the Department of Energy's Office of Biological and Environmental Research. The NGEE Arctic project had two field research sites: 1) located within the Arctic polygonal tundra coastal region on the Barrow Environmental Observatory (BEO) and the North Slope near Utqiagvik (Barrow), Alaska and 2) multiple areas on the discontinuous permafrost region of the Seward Peninsula north of Nome, Alaska. Through observations, experiments, and synthesis with existing datasets, NGEE Arctic provided an enhanced knowledge base for multi-scale modeling and contributed to improved process representation at global pan-Arctic scales within the Department of Energy's Earth system Model (the Energy Exascale Earth System Model, or E3SM), and specifically within the E3SM Land Model component (ELM).

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2016

Modeling Forest Biomass and Growth: Coupling Long-Term Inventory and Lidar Data

Combining spatially-explicit long-term forest inventory and remotely sensed information from Light Detection and Ranging (LiDAR) datasets through statistical models can be a powerful tool for predicting and mapping above-ground biomass (AGB) at a range of geographic scales. We present and examine a novel modeling approach to improve prediction of AGB and estimate AGB growth using LiDAR data. The proposed model accommodates temporal misalignment between field measurements and remotely sensed data-a problem pervasive in such settings-by including multiple time-indexed measurements at plot locations to estimate AGB growth. We pursue a Bayesian modeling framework that allows for appropriately complex parameter associations and uncertainty propagation through to prediction. Specifically, we identify a space-varying coefficients model to predict and map AGB and its associated growth simultaneously. The proposed model is assessed using LiDAR data acquired from NASA Goddard's LiDAR, Hyper-spectral & Thermal imager and field inventory data from the Penobscot Experimental Forest in Bradley, Maine. The proposed model outperformed the time-invariant counterpart models in predictive performance as indicated by a substantial reduction in root mean squared error. The proposed model adequately accounts for temporal misalignment through the estimation of forest AGB growth and accommodates residual spatial dependence. Results from this analysis suggest that future AGB models informed using remotely sensed data, such as LiDAR, may be improved by adapting traditional modeling frameworks to account for temporal misalignment and spatial dependence using random effects.

Babcock, Chad↗
NASA NTRS1999

Canopy Cover Predictions using Ground Observations and Remotely Sensed Data

Maps of vegetation status are needed at many scales, from the field level to monitor ecosystem condition to the global level to understand the carbon cycle. Status is quantified by such variables as leaf area index, biomass, and fraction of canopy cover. Current methods of predicting vegetation variables use remote sensing data to provide a spatially exhaustive data source. In a study in western Montana, several hundred ground observations made by the US Forest Service on tenth-acre conifer plots were used to develop aspatial regression and geostatistical prediction models. Normalized Difference Vegetation Index (NDVI) values from Landsat Thematic Mapper images were used as ancillary data. These models were then used to predict canopy cover at unsampled locations in a 97 square kilometer region on the boundary of the Flathead National Forest and the Bob Marshall Wilderness. Independent data from two dates six years apart were used for validation. Given the assumption that actual canopy cover remained relatively unchanged within this time period, partial validation can be achieved by measuring the correspondence of the two maps. This criterion results in ranking the aspatial regression maps as less accurate than the geostatistically generated maps. The geostatistical approach emphasizes ground measurements more heavily than does aspatid regression. Geostatistical simulations of canopy cover also provide a means of describing uncertainty about the patterns of canopy cover.

Dungan, Jennifer L.↗
NASA NTRS1991

Fundamental studies of radar scattering from water surfaces: The Lake Washington experiment

The University of Kansas and the University of Washington conducted a series of experiments during July and August of 1989, and July and August of 1990, to study the effects of various geophysical parameters on radar backscatter. The experiments were conducted from a platform in Lake Washington. Measurements of backscattered power and radar range were made by the University of Kansas, and environmental data such as wind speed, wind direction, and air and water temperature were measured by the University of Washington. Results of preliminary data processing are described. Radar data were acquired using two radars, one that operated at C and X bands and another at Ka band. Measurements were made at W and HH antenna polarizations, at different angles of incidence and under various wind conditions. Plots of backscattered power, normalized radar cross section, and wave height, and the Modulation Transfer Functions of selected data are presented.

Salam, A.↗
NASA NTRS1979

VORTAB - A data-tablet method of developing input data for the VORLAX program

A method of developing an input data file for use in the aerodynamic analysis of a complete airplane with the VORLAX computer program is described. The hardware consists of an interactive graphics terminal equipped with a graphics tablet. Software includes graphics routines from the Tektronix PLOT 10 package as well as the VORTAB program described. The user determines the size and location of each of the major panels for the aircraft before using the program. Data is entered both from the terminal keyboard and the graphics tablet. The size of the resulting data file is dependent on the complexity of the model and can vary from ten to several hundred card images. After the data are entered, two programs READB and PLOTB, are executed which plot the configuration allowing visual inspection of the model.

Denn, F. M.↗