Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Competition”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,711 records · Page 95
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Controlling the Balance between Remote, Pinhole, and van der Waals Epitaxy of Heusler Films on Graphene/Sapphire

Remote epitaxy is promising for the synthesis of lattice-mismatched materials, exfoliation of membranes, and reuse of expensive substrates. However, clear experimental evidence of a remote mechanism remains elusive. Alternative mechanisms such as pinhole-seeded epitaxy or van der Waals epitaxy can often explain the resulting films. Here, in this study, we show that growth of the Heusler compound GdPtSb on clean graphene/sapphire produces a 30° rotated (R30) superstructure that cannot be explained by pinhole epitaxy. With decreasing temperature, the fraction of this R30 domain increases, compared to the direct epitaxial R0 domain, which can be explained by a competition between remote versus pinhole epitaxy. Careful graphene/substrate annealing and consideration of the relative lattice mismatches are required to obtain epitaxy to the underlying substrate across a series of other Heusler films, including LaPtSb and GdAuGe. The R30 superstructure provides a possible experimental fingerprint of remote epitaxy, since it is inconsistent with the leading alternative mechanisms.

36 MATERIALS SCIENCE↗
DOE OSTI2023

High-Quality Surface Plasmon Polaritons in Large-Area Sodium Nanostructures

Sodium (Na) is predicted to be an ideal plasmonic material with ultralow optical loss across visible to near-infrared (NIR). However, there has been limited research on Na plasmonics. We develop a scalable fabrication method for Na nanostructures by combining phase-shift photolithography and a thermo-assisted spin-coating process. Using this method, we fabricated Na nanopit arrays with varying periodicities (300-600 nm) and with tunable surface plasmon polariton (SPP) modes spanning visible to NIR. We achieved SPP resonances as narrow as 9.3 nm. In addition, Na nanostructures showed line width narrowing from visible toward NIR, showing their prospect operating in the NIR. To address the challenges associated with the high reactivity of Na, we designed a simple encapsulation strategy and stabilized the Na nanostructures in ambient conditions for more than two months. As a low-cost and low-loss plasmonic material, Na offers a competitive option for nanophotonic devices and plasmon-enhanced applications.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2022

Charge Transfer Dynamics in MoSe 2 /hBN/WSe 2 Heterostructures

Ultrafast charge transfer processes provide a facile way to create interlayer excitons in directly contacted transition metal dichalcogenide (TMD) layers. More sophisticated heterostructures composed of TMD/hBN/TMD enable new ways to control interlayer exciton properties and achieve novel exciton phenomena, such as exciton insulators and condensates, where longer lifetimes are desired. In this work, we experimentally study the charge transfer dynamics in a heterostructure composed of a 1 nm thick hBN spacer between MoSe 2 and WSe 2 monolayers. We observe the hole transfer from MoSe 2 to WSe 2 through the hBN barrier with a time constant of 500 ps, which is over 3 orders of magnitude slower than that between TMD layers without a spacer. Furthermore, we observe strong competition between the interlayer charge transfer and intralayer exciton–exciton annihilation processes at high excitation densities. Here, our work opens possibilities to understand charge transfer pathways in TMD/hBN/TMD heterostructures for the efficient generation and control of interlayer excitons.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Cu-Doped Iron Oxide for the Efficient Electrocatalytic Nitrate Reduction Reaction

The electrochemical nitrate reduction reaction (NO 3 RR) is a promising alternative synthetic route for sustainable ammonia (NH 3 ) production, because it not only eliminates nitrate (NO 3 – ) from water but also produces NH 3 under mild operating conditions. However, owing to the complicated eight-electron reaction and the competition from the hydrogen evolution reaction, developing catalysts with high activities and Faradaic efficiencies (FEs) is highly imperative to improve the reaction performance. In this study, Cu-doped Fe 3 O 4 flakes are fabricated and demonstrated to be excellent catalysts for electrochemical conversion of NO 3 – to NH 3 , with a maximum FE of ~100% and an NH 3 yield of 179.55 ± 16.37 mg h –1 mg cat –1 at –0.6 V vs RHE. Here, theoretical calculations reveal that doping the catalyst surface with Cu results in a more thermodynamically facile reaction. These results highlight the feasibility of promoting the NO 3 RR activity using heteroatom doping strategies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Layer Resolved Cr Oxidation State Modulation in Epitaxial SrFe 0.67 Cr 0.33 O 3−δ Thin Films

Understanding how doping influences physicochemical properties of ABO 3 perovskite oxides is critical for tailoring their functionalities. In this study, SrFe 0.67 Cr 0.33 O 3−δ epitaxial thin films were used to examine the effects of Fe and Cr competition on structure and B-site cation oxidation states. The films exhibit a perovskite-like structure near the film/substrate interface, while a brownmillerite-like structure with horizontal oxygen vacancy channels predominates near the surface. Electron energy loss spectroscopy shows Fe remains Fe 3+ , while Cr varies from ∼Cr 3+ (tetrahedral layers) to ∼Cr 4+ (octahedral layers) within brownmillerite phases and becomes ∼Cr 4.5+ in perovskite-like phases. Theoretical simulations indicate that Cr–O bond arrangements and the way oxygen vacancies interact with Cr and Fe drive Cr charge disproportionation. High-valent Cr cations introduce additional densities of states near the Fermi level, reducing the optical bandgap from ∼2.0 eV (SrFeO 2.5 ) to ∼1.7 eV (SrFe 0.67 Cr 0.33 O 3−δ ). In conclusion, these findings offer insights into B-site cation doping in the perovskite oxide framework.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Electrochemical Removal of Se(IV) from Wastewater Using RuO2‑Based Catalysts

The removal of selenite (SeO32-) from water is challenging due to the risk of secondary pollutants. To address this, we developed RuO2-based nanocatalysts on the titanium plate (RuO2/TP) for direct electrochemical reduction of Se(IV) to elemental selenium [Se(0)]. Optimizing Sn doping in RuO2 nanoparticles to induce charge redistribution enabled the Ru0.9Sn0.1Ox/TP catalyst to achieve ∼90% Se(IV) removal across concentrations of 0.1, 1, and 10 mM at -2 mA cm-2 over 8 h, outperforming undoped RuO2/TP. Furthermore, Ru0.9Sn0.1Ox/TP also maintained ∼90% removal efficiency in 1 mM of Se(IV) solutions containing competitive anions (0.5 M Cl-, 0.1 M SO42-, 0.01 M NO3-, and their mixtures), demonstrating suitability for complex wastewater treatment. Importantly, the catalysts were recyclable, with no observable contamination introduced into the solution. Density functional theory (DFT) calculations suggest that Sn doping effectively reduces the energy barrier for the reduction of Se(IV) to Se(0).

Hao, Shaoyun↗
DOE OSTI2020

Engineering Catalysts for Selective Ester Hydrogenation

The development of efficient catalysts and processes for synthesizing functionalized (olefinic and/or chiral) primary alcohols and fluoral hemiacetals is currently needed. These are valuable building blocks for pharmaceuticals, agrochemicals, perfumes, and so forth. From an economic standpoint, bench-stable Takasago Int. Corp.’s Ru-PNP, more commonly known as Ru-MACHO, and Gusev’s Ru-SNS complexes are arguably the most appealing molecular catalysts to access primary alcohols from esters and H 2 . This work introduces economically competitive Ru-SNP(O) z complexes ( z = 0, 1), which combine key structural elements of both of these catalysts. In particular, the incorporation of SNP heteroatoms into the ligand skeleton was found to be crucial for the design of a more product-selective catalyst in the synthesis of fluoral hemiacetals under kinetically controlled conditions. Based on experimental observations and computational analysis, this paper further extends the current state-of-the-art understanding of the accelerative role of KO- t -C 4 H 9 in ester hydrogenation. Finally, it attempts to explain why a maximum turnover is seen to occur starting at ~25 mol % base, in contrast to only ~10 mol % with ketones as substrates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Role of Axial Ligation in Gating the Reactivity of Dimethylplatinum(III) Diimine Radical Cations

Electrochemical methods are coupled with chemical oxidant-based analytical strategies to evaluate the oxidative reactivity of the platinum(II) diimine complex (bpy)Pt II (CH 3 ) 2 (bpy = 2,2'-bipyridine) in coordinating and non-coordinating media. Through this mechanistic analysis, we show that the one-electron oxidation of (bpy)Pt II (CH 3 ) 2 generates a highly reactive, 15-electron Pt III radical cation and identify three reaction pathways that can follow this oxidation: radical–substrate dimerization, radical-radical dimerization, and oxidative disproportionation. Axial ligation of the initially generated [(bpy)Pt III (CH 3 ) 2 ] •+ species is a critical driver of this reactivity, gating the available mechanistic pathways and tuning the competition between radical–radical dimerization and oxidative disproportionation.

14 SOLAR ENERGY↗
DOE OSTI2021

Photocatalytic Transfer Hydrogenation in Water: Insight into Mechanism and Catalyst Speciation

Organometallic catalysts with strong metal-to-ligand charge-transfer (MLCT) optical transitions and reactive metal-hydride bonds provide opportunities for new excited-state reactivity. Toward this end, we have investigated photoinduced transfer hydrogenation reactions for a series of Cp*IrH complexes with functionalized bipyridyl ligands. Overcoming the baseline reactivity of this class of catalyst toward hydrogen evolution in aqueous media presents a major challenge for focusing this photochemical reactivity into desired transformations of more complex organic substrates. In this work, a photochemically induced aqueous ketone reduction catalyzed by [Cp*Ir(bpy)H][Cl] is reported and benchmarked to the competing hydrogen evolution reaction (HER). A detailed mechanistic study is conducted of the reduction of cyclohexanone with sodium formate delivering the reducing equivalent. Examining the kinetic profile of the cyclohexanone reduction revealed an unexpected induction period, suggesting a more complex underlying reaction mechanism where product selectivity was not simply a function of direct competition from a common excited-state reactive intermediate. The reaction kinetics were analyzed by variable time normalization analysis (VTNA), and the catalyst resting state was interrogated through operando light-emitting diode (LED) illumination H-1 NMR spectroscopy. Overall, these and other mechanistic studies provide insight into a photochemical reaction pathway to ketone reduction that is distinct from that previously reported for HER.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

High Activity and Selectivity for Catalytic Alkane–Alkene Transfer (De)hydrogenation by ( tBu PPP)Ir and the Importance of Choice of a Sacrificial Hydrogen Acceptor

The triphosphorus-coordinating pincer iridium fragment ( tBu PPP)Ir was recently reported to be highly active for the catalytic dehydrogenation of n-alkanes. Dehydrogenation is calculated to be highly regioselective for the terminal position of n-alkanes. Here, the extremely high intermolecular selectivity observed in n-alkane/cycloalkane competition experiments supports the prediction of extremely high regioselectivity for dehydrogenation of n-alkanes. The use of sterically unhindered hydrogen acceptors is key to observing the high activity of the ( tBu PPP)Ir fragment. 4,4-Dimethylpent-1-ene (TBP) is found to be particularly convenient for this purpose. With the commonly used hydrogen acceptor 3,3-dimethylbut-1-ene (TBE), ( tBu PPP)Ir affords n-alkane dehydrogenation at a rate no different than that obtained with the well-known fragment ( iPr PCP)Ir. However, with the use of TBP as acceptor, ( tBu PPP)Ir shows much greater activity for n-alkane transfer dehydrogenation than previously reported catalysts, affording appreciable rates even at 50 °C, an unprecedentedly low temperature for catalytic alkane transfer dehydrogenation. Also critical to the identification of ( tBu PPP)Ir as a highly effective catalyst is the use of n-alkane substrate rather than the commonly used “model” dehydrogenation substrate, cyclooctane, with which dehydrogenation rates are much lower than those with n-alkanes.

10 SYNTHETIC FUELS↗
DOE OSTI2023

Reactivity and Mechanisms of Methane, Ethane, and Benzene C–H Amination with an Iodine(III) Bistriflimide Complex

The iodine(III) bistriflamide complex (C 6 F 5 ) III I(NTf 2 ) 2 in HNTf 2 (bistriflimide acid; (CF 3 SO 2 ) 2 NH) selectively aminates methane and ethane. At a 100 °C reaction with methane after 3 h, it resulted in the exclusive formation of MeNTf 2 with a yield of approximately 40%. For ethane, at 100 °C in 2 h, a > 80% yield was found for a combination of monofunctionalized and difunctionalized amination products. In contrast to alkanes giving functionalized products, the reaction of (C 6 F 5 ) III I(NTf 2 ) 2 with benzene resulted in being stalled at (C 6 F 5 )I III (Ph)(NTf 2 ) with a <5% conversion to PhNTf 2 even at 120 °C. PWPB95-D3(BJ) density functional theory calculations indicate that C–H activation is the lowest energy pathway to break the hydrocarbon bonds and is lower in energy than radical, electron-transfer, proton-coupled electron-transfer, or hydride substitution pathways. For methane, from the (C 6 F 5 )I III (CH 3 )(NTf 2 ) intermediate, there is a one-step amine functionalization mechanism that avoids a carbocation intermediate. For ethane, from the (C 6 F 5 )I III (Et)(NTf 2 ) intermediate, dynamics simulations suggest the possibility of a competitive two-step functionalization pathway that involves a short-lived carbocation intermediate. As a result, a reaction coordinate strain analysis provides a straightforward model for understanding the relative reactivity rates for alkyl versus aryl functionalization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Metal Site Substitution and Role of the Dimer on Symmetry Breaking in FePS 3 and CrPS 4 under Pressure

We combine infrared absorption, Raman scattering, and diamond anvil cell techniques to explore the properties of FePS 3 and CrPS 4 under pressure, comparing our findings with a symmetry analysis, lattice dynamics calculations, and an examination of the energy landscape. Although these complex chalcogenides are considered to be members of the same family of materials, they display remarkably different phase progressions on account of the metal center orbital filling, character of the P–P linkage, layer corrugation, and differing size of the van der Waals gap. Here, we discuss the space group progressions, structure–property relations, and development of pressure-induced metallicity in terms of the competition between local and long-range symmetry transformations and structural distortion pathways. These findings place the properties of FePS 3 and CrPS 4 on a firm foundation for work under strain control and in the single layer limit.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Epitaxial Stabilization and Oxygen Evolution Reaction Activity of Metastable Columbite Iridium Oxide

Non-rutile polymorphs of binary iridium oxide such as columbite IrO 2 (α-IrO 2 ) are promising candidates for highly active acid-stable oxygen evolution reaction (OER) catalysts, yet their synthesis has been challenging due to the dominant thermodynamic stability of rutile IrO 2 (R-IrO 2 ). Here, we report the growth of α-IrO 2 via epitaxial thin films using pulsed laser deposition. We observe that, in competition with R-IrO 2 (100), the films can be optimized to be predominantly (100)-oriented α-IrO 2 . Surprisingly, the activity of α-IrO 2 shows a large discrepancy of ~0.2 V in the overpotential compared to its predicted activity, which is resolved via theoretical calculations to be a crystal orientation effect. This demonstrates that the electrocatalytic activity can be significantly varied upon crystal orientation, a parameter that is difficult to control in conventional polycrystalline systems but accessible in epitaxial thin films. In total, this study demonstrates epitaxial thin film growth as a powerful technique, which can overcome large energetic instabilities on the order of ~300 meV to stabilize metastable material structures inaccessible by bulk synthesis. As a result, this provides unique opportunities to effectively identify the atomic structure of active catalysts by combining investigations of metastable materials with theoretical predictions.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Material Failure Mechanisms of Alkaline Zn Rechargeable Conversion Electrodes

Zinc (Zn) alkaline electrodes hold great importance and promise in the battery technology community, yet their behavior in real-world applications is still poorly understood. Here, we report a study of failure mechanisms and material evolution during cycling of 27 zinc–manganese dioxide (Zn–MnO 2 ) cells wherein the percent utilization of the Zn electroactive material is systematically varied between 1 and 16%. Cell fabrication is kept typical of the prevailing industrial cell design. The cycle life ranges from 2800 to 60, depending inversely on the Zn utilization. In all cases, the Zn material microstructure sheds the polytetrafluoroethylene (PTFE) binder and forms zinc oxide (ZnO) rods, with longer rods formed by lower current per Zn mass. Irreversible side reactions such as the hydrogen evolution reaction (HER), short circuits, or gas crossover cause the Zn anode’s charging efficiency to average 92% (as low as 86%), which in turn causes the baseload of metallic Zn to gradually disappear. Cell failure occurs after the baseload of metallic Zn is exhausted. The total lifetime discharge capacity remains constant near 12 ± 5 Ah/g Zn invariant of Zn utilization, which suggests that the aforementioned processes of Zn microstructural evolution and side-reaction destruction of baseload metallic zinc both progress linearly with cell capacity throughput. Manual reproduction of individual Zn failure mechanisms is performed in 22 fresh cells. Tight packing of the microstructure can lead to poor mass transfer, which causes supersaturation of soluble Zn and finally produces a high overvoltage during discharge. Here, the low charging current density yields poor coulombic efficiency due either to the competitive HER or soft short circuits.

25 ENERGY STORAGE↗
DOE OSTI2022

Combined Effects of Uniform Applied Pressure and Electrolyte Additives in Lithium-Metal Batteries

The development of lithium-metal batteries with good performance and long lifetimes requires fundamental insight into the mechanisms underlying performance improvements from individual design strategies and the interactions between multiple improvement approaches. Here, in this work, we investigated the individual and combined effects of applied pressure and a LiAsF 6 electrolyte additive on the performance of anode-free lithium-metal batteries; we employed various pressure application methods, which vary both in magnitude and uniformity. Both approaches individually improve cycling performance of anode-free lithium-metal batteries. Pressure increases the cycling efficiency at both the anode and cathode by promoting improved morphologies, while the LiAsF 6 additive additionally improves performance at the anode by enhancing the solid electrolyte interphase (SEI) properties. The combination of uniform applied pressure and a LiAsF 6 electrolyte additive produces lithium-metal batteries with cycling performance higher than can be achieved with either approach alone. This additional performance improvement is able to be realized due to the complementary rather than competitive nature of the mechanisms underlying applied pressure (lithium morphology) and electrolyte additives (SEI properties). Our results highlight the importance of moving beyond the investigation of isolated design strategies and demonstrate that superior cycling can be achieved by combining multiple approaches.

25 ENERGY STORAGE↗
DOE OSTI2023

Direct Laser Writing of Multimetal Bifunctional Catalysts for Overall Water Splitting

Water electrolysis is of interest as a sustainable way to produce clean hydrogen and oxygen fuel and help mitigate the rising problems of climate change while meeting global energy demands. High-efficiency, stable, and earth-abundant bifunctional catalysts are needed to enable more effective electrochemical cells for the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). Here, we investigate the synthesis, composition, performance, and mechanism of multimetal catalysts serving dual functionality in both OER and HER of water electrolysis. Through a laser synthesis method, we synthesized heterogeneous catalysts of nanocrystalline multimetallic alloy pockets embedded within an amorphous oxide matrix. We evaluated the performance and composition of a range of mixed transition-metal oxide materials for both OER and HER, ultimately synthesizing a Cr 0.01 Fe 0.27 Co 0.34 Ni 0.38 O x /C y catalyst that has a stable, high-rate, and competitive overall water splitting performance of 1.76 V at 100 mA cm –2 in an alkaline medium. Using density functional theory to gain insight as the active site and mechanism, we propose that the inclusion of a minor amount of Cr increases the degeneracy of energetic states that lowers the cost of forming the O 2 p–d bond and H 1 s–d bond due to the hybridization of s, p, and d orbitals from Cr. Using a two-electrode water electrolysis cell with a constant potential of 1.636 V to mimic the setup for fuel production, we found the catalyst to be stable at 14–15 mA cm –2 for 40 h. Furthermore, this laser synthesis method allowing for facile and rapid synthesis of complex multimetal systems demonstrates how doping a Fe, Co, and Ni heterogeneous amorphous/nanocrystalline structure with small amounts of Cr is important for bifunctional catalytic behavior, particularly for increasing HER functionality in advancing our understanding for future electrocatalytic design.

08 HYDROGEN↗
DOE OSTI2025

Highly Selective Electrolytic Reduction of CO 2 to Ethylene

We investigate the reduction of CO 2 to ethylene across buffered anolyte pH values 4 to 14 using a copper–phosphorus (Cu–P) electrocatalyst in a zero-gap membrane electrode assembly. Electrochemical CO 2 reduction using alkaline electrolytes typically shows limited carbon efficiencies and single-pass efficiencies, while acidic conditions typically favor the hydrogen evolution reaction. Results from this work show that weakly phosphate-buffered acidic anolytes (pH 6) maximize ethylene production with a 73% FE at 300 mA cm –2 and 51% FE at 500 mA cm –2 , including a 51% single-pass CO 2 conversion efficiency for over 400 h of continuous operation. We propose a mechanism based on pH-dependent CO coverage that controls the selectivity at the *HCCOH intermediate. Low CO coverage at pH 6 favors hydroxide elimination to *CCH, yielding ethylene (98% of C 2 products), while high coverage at pH 14 promotes hydrogenation to ethanol (44% of C 2 ). The HER mechanism transitions from H 2 O-mediated at pH 14 to phosphate-mediated (H 2 PO 4 – /HPO 4 2– ) at weakly acidic pH, minimizing HER competition at pH 6. This mechanistic understanding enables controlled C 2 product selectivity through manipulation of the CO coverage and local proton activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Structural and Electrocatalytic Studies of Pulsed Laser Deposited Epitaxial RuO 2 Thin Films

Two sets of high-quality epitaxial ruthenium oxide (RuO 2 ) thin films with different thicknesses were synthesized in situ on cost-competitive sapphire substrates by using a pulsed laser deposition technique. The first set of films, with a thickness of 40 nm and a sheet resistance of 15.7 Ω/□, was prepared using 2100 laser pulses, while the second set of films, with a thickness of 87 nm and a sheet resistance of 6.7 Ω/□, was prepared using 4800 laser pulses. All other deposition parameters were kept the same. The post-deposition structural and morphological measurements showed that both sets of films grew at the same growth rate, had the same crystallinity, similar grain boundary density, and slightly different surface roughness. The thicker RuO 2 films achieved an overpotential of 280 mV for the oxygen evolution reaction at a current density of 100 μA/cm 2 , comparable to or exceeding the performance of films grown on more expensive substrates. Comparatively, the thinner RuO 2 films, which have a significantly higher charge transfer resistance (250 Ω versus 100 Ω for thick films), display a higher overpotential of 320 mV. These results indicate that the lower electrical resistance of thicker films promotes charge transfer through the film body, leading to superior electrocatalytic properties.

charge-transfer↗