Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “COLLECTIVE MODEL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,711 records · Page 95

Comparison of measured and modeled radiation, heat and water vapor fluxes: FIFE pilot study

The primary objectives of the 1985 study were to test the feasibility of using radio frequency receivers to collect data from automated weather stations and to evaluate the use of the data collected by the automated weather stations for modeling the fluxes of latent heat, sensible heat, and radiation over wheat. The model Cupid was used to calculate these fluxes which were compared with fluxes of these entities measured using micrometeorological techniques. The primary objectives of the 1986 study were to measure and model reflected and emitted radiation streams at a few locations within the First International Satellite Land-Surface Climatology Project Field Experiment (FIFE) site and to compare modeled and measured latent heat and sensible heat fluxes from the prairie vegetation.

Blad, Blaine L.↗

Experimental results of wake steering using fixed angles

In this article, the authors present a test of wake steering at a commercial wind farm. A single fixed yaw offset, rather than an optimized offset schedule, is alternately applied to an upstream wind turbine, and the effect on downstream turbines is analyzed. This experimental design allows for comparison with engineering wake models independent of the controller's ability to track a varying offset and correctly measure wind direction. Additionally, by applying the same offset in beneficial and detrimental conditions, we are able to collect important data for assessing second-order wake model predictions. Results of the article from collected data show good agreement with the FLOw Redirection and Induction in Steady State (FLORIS) engineering model and offer support for the asymmetry of wake steering predicted by newer models, such as the Gauss–curl hybrid model.

17 WIND ENERGY↗

High-Temperature Linear Receiver Enabled by Multicomponent Aerogels

Concentrating solar thermal (CST) technology has significant potential mainly due to its dispatchability and low cost of storage. However, to compete with other sources, including utility-scale solar PV, its final cost (cents/kWh) still needs to be lowered. Cost reduction can be achieved by improving the system level efficiency of the CST plants through the deployment of advanced power cycles, which operate at high temperatures of ~700°C. However, optical, and thermal losses pose a major challenge to the efficiency of such CST systems. The overall aim of this project is to investigate and de-risk a linear solar receiver concept called an Aerogel Insulated Receiver (AIR) that generates high temperatures (up to 700°C) at a low solar concentration ratio (<100) and with a high collection efficiency (optical × receiver). Our prior work has demonstrated the thermal stability1 and optical and heat-insulating properties2,3 of transparent aerogel insulation at a one-inch scale. The focus of this work is on (1) co-optimization of the geometry of the aerogel tile and receiver enclosure to fit a standard parabolic collector (PTC), (2) scale-up of aerogels into 4-inch tiles while preserving key properties, (3) experimental measurement of receiver heat loss (W/m) in a >70-cm test stand and validation of anticipated receiver performance at high temperatures. Regarding (1), appropriate optical and thermal models for a parabolic trough receiver (PTR) are developed and validated. The geometry of the aerogels and the receiver enclosure are co-optimized to maximize the collection efficiency. The model predicts a 54% collection efficiency at 700°C for an AIR design based on flat aerogels. By combining the collection efficiency with the power block efficiency of supercritical CO 2 cycles, we predict >10% improvements in peak plant efficiency relative to existing line-focusing CST systems. The application of curved plasmonic aerogels is predicted to further increase the collection efficiency to 64%. Regarding (2), we demonstrate the successful development of 6-inch-long refractory aerogel tiles with optical, thermal, and stability characteristics consistent with our prior work. This scale-up requires a transition to a larger ALD station and modifying the ALD process variables such as exposure time and the number of precursor doses. Regarding (3), we design and develop an AIR test stand measuring 3 feet in length. Heat loss performance analysis is carried out using the test stand. The results indicate that aerogel insulation can significantly reduce receiver thermal losses at the high operating temperatures required for next-generation PTRs. The experimental results agree with the heat loss performance predicted by our receiver model. Lastly, we conducted preliminary failure mode and effects (FMEA) and techno-economic (TEA) analyses to identify failure mitigation strategies and commercial opportunities, respectively. Overall, this project identifies key opportunities and challenges in deploying aerogel insulating receivers in next-generation line-focusing CST technologies.

14 SOLAR ENERGY↗

Canopy reflectance modeling in a tropical wooded grassland

A study area was selected in West Africa in order to establish a relationship between rainfall and grassland productivity, and also to provide ground measurements and support for the GIMMS investigation of the use of AVHRR vegetation index data for monitoring grassland biomass and productivity. Field data collection, image and collateral data acquisition, model development, and data analysis and processing are briefly discussed.

Simonett, D.↗

Search for dark matter produced in association with a Higgs boson decaying to a τ lepton pair in proton-proton collisions at $\sqrt{s}=13$ TeV

A search for dark matter particles produced in association with a Higgs boson decaying into a pair of τ leptons is performed using data collected in proton-proton collisions at a center-of-mass energy of 13 TeV with the CMS detector. The analysis is based on a data set corresponding to an integrated luminosity of 101 fb −1 collected in 2017–2018. No significant excess over the expected standard model background is observed. This result is interpreted within the frameworks of the 2HDM+a and baryonic Z′ benchmark simplified models. The 2HDM+a model is a type-II two-Higgs-doublet model featuring a heavy pseudoscalar with an additional light pseudoscalar. Upper limits at 95% confidence level are set on the product of the production cross section and the branching fraction for each of these two simplified models. Heavy pseudoscalar boson masses between 400 and 700 GeV are excluded for a light pseudoscalar mass of 100 GeV. For the baryonic Z′ model, a statistical combination is made with an earlier search based on a data set of 36 fb −1 collected in 2016. In this model, Z′ boson masses up to 1050 GeV are excluded for a dark matter particle mass of 1 GeV.

Dark Matter↗

Electromagnetic energy, absorption, and Casimir forces: Uniform dielectric media in thermal equilibrium

The derivation of Casimir forces between dielectrics can be simplified by ignoring absorption, calculating energy changes due to displacements of the dielectrics, and only then admitting absorption by allowing permittivities to be complex. As a first step toward a better understanding of this situation we consider in this article the model of a dielectric as a collection of oscillators, each of which is coupled to a reservoir giving rise to damping and Langevin forces on the oscillators and a noise polarization acting as a source of a fluctuating electromagnetic field in the dielectric. The model leads naturally to expressions for the quantized electric and magnetic fields that are consistent with those obtained in approaches that diagonalize the coupled system of oscillators for the dielectric medium, the reservoir, and the electromagnetic field. It also results in a fluctuation-dissipation relation between the noise polarization and the imaginary part of the permittivity; comparison with the Rytov fluctuation-dissipation relation employed in the well-known Lifshitz theory for the van der Waals (or Casimir) force shows that the Lifshitz theory is actually a classical stochastic electrodynamical theory. The approximate classical expression for the energy density in a band of frequencies at which absorption in a dielectric is negligible is shown to be exact as a spectral thermal equilibrium expectation value in quantum electrodynamic theory. Our main result is the derivation of an expression for the QED energy density of a uniform dispersive, absorbing media in thermal equilibrium. The spectral density of the energy is found to have the same form with or without absorption. We also show how the fluctuation-dissipation theorem ensures a detailed balance of energy exchange between the (absorbing) medium, the reservoir, and the electromagnetic field in thermal equilibrium.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

An ontology to represent synthetic building occupant characteristics and behavior

Since the introduction of the occupant behavior Drivers-Needs-Actions-Systems (DNAS) framework in 2013, researchers have used the framework or further developed it based on their case studies, which include efforts to collect new data on occupant behaviors. The effort is often costly for the relatively few new data points added. Problems emerge when the already collected data do not meet the modelers' interoperability requirements. Previous studies addressed this issue by developing more sophisticated ontologies that enable integration with other datasets and synthetic data methodologies that would meet unique research applications. This paper presents an extension of the DNAS framework for the representation of synthetic occupant data to support various applications and use cases across the building life cycle. An agent-based modeling application is one of our motivations that requires more elaborate characteristics of an occupant-agent or a group-of-agent. The extension, built upon a review of the literature, introduces new elements to the framework that fall into five categories, including socio-economic, geographical location, activities, subjective values, and individual and collective adaptive actions. On-going research includes identifying occupant datasets and developing data fusion methods to generate synthetic occupants, as well as to demonstrate its applications in agent-based modeling coupled with building performance simulation.

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗

Real-time verification of multileaf collimator-driven radiotherapy using a novel optical attenuation-based fluence monitor

Purpose: Multileaf collimator (MLC)-driven conformal radiotherapy modalities [e.g., such as intensity-modulated radiotherapy (IMRT), intensity-modulated arc therapy, and stereotactic body radiotherapy] are more subject to delivery errors and dose calculation inaccuracies than standard modalities. Fluence monitoring during treatment delivery could reduce such errors by allowing an independent interface to quantify and assess measured difference between the delivered and planned treatment administration. We developed an optical attenuation-based detector to monitor fluence for the on-line quality control of radiotherapy delivery. The purpose of the current study was to develop the theoretical background of the invention and to evaluate the detector's performance both statistically and in clinical situations. Methods: We aligned 60 27-cm scintillating fibers coupled to a photodetector via clear optical fibers in the direction of motion of each of the 60 leaf pairs of a 120 leaves Millenium MLC on a Varian Clinac iX. We developed a theoretical model to predict the intensity of light collected on each side of the scintillating fibers when placed under radiation fields of varying sizes, intensities, and positions. The model showed that both the central position of the radiation field on the fiber (x{sub c}) and the integral fluence passing through the fiber ({Phi}{sub int}) could be assessed independently in a single measurement. We evaluated the performance of the prototype by (1) measuring the intrinsic variation of the measured values of x{sub c} and {Phi}{sub int}, (2) measuring the impact on the measured values of x{sub c} and {Phi}{sub int} of random leaf positioning errors introduced into IMRT fields, and (3) comparing the predicted values of x{sub c} and {Phi}{sub int} calculated with the treatment planning software to the measured values of x{sub c} and {Phi}{sub int} in order to assess the predictive effectiveness of the developed theoretical model. Results: We observed a very low intrinsic dispersion, dominated by Poisson statistics, for both x{sub c} (standard deviations of less than 1 mm) and {Phi}{sub int} (standard deviations of less than 0.20%). When confronted with random leaf positioning errors from IMRT segments, {Phi}{sub int} was highly sensitive to single leaf positioning errors as small as 1 mm at isocenter, while x{sub c} was sensitive to leaf pair translation errors of at least 2 mm at isocenter. Owing to the uncertainties in the doses calculated in regions of high perpendicular dose gradients, the measured values of x{sub c} and {Phi}{sub int} deviated from the predicted values of x{sub c} and {Phi}{sub int} by a mean of 1.3 mm and 2.6%, respectively. Conclusion: Our study showed that an optical attenuation-based detector can be used to effectively monitor integral fluence during radiotherapy delivery. The performance of such a system would enable real-time quality control of the incident fluence in current MLC-driven treatments such as IMRT and future adaptive radiotherapy procedures where new treatment plans will have to be delivered without passing thru the current standard quality control chain.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Developing a 3-D Seismic-Attribute Framework Model of Yucca Flat, Nevada National Security Site

Using data collected during underground nuclear testing in Yucca Flat at the Nevada National Security Site, an existing 3-D hydrostratigraphic framework model (HFM) that was developed for groundwater modeling is being converted to a 3-D seismic-attribute framework model (SFM). The resulting SFM can be used to better understand seismic wave propagation from underground chemical explosive tests planned for Yucca Flat as part of the Source Physics Experiment. The Yucca Flat HFM covers 1,250 square kilometers and depicts the distribution of subsurface geologic units, called hydrostratigraphic units, according to their ability to transmit groundwater. Many of the rock properties and geologic structures that control groundwater flow also influence seismic wave transmission, so the team reasoned that the HFM could be modified to create an SFM. Existing geologic and geophysical data, including interval velocity measurements from down-hole seismic surveys conducted in 188 holes across Yucca Flat, were used to evaluate the HFM and develop a 3-D velocity property model. The velocity model was integrated with the HFM so that unit volumes within the HFM could be evaluated according to their seismic character. Results to date show, as anticipated, that most of the 3-D hydrostratigraphic unit volumes in the HFM can function as seismic-stratigraphic unit volumes. Thus, with relatively minor modifications, the HFM can be converted to an SFM.

seismic, Yucca Flat, model↗

Estimation of Uncertainties of Wall Temperature Accomplished by Model Calibration Technique Using Small to Large Scale Reflooding Test Data

The fidelity of the prediction can be evaluated by performing validation and uncertainty quantification with suitable test data. Nuclear power plant design and operation must accommodate the uncertainties in predicting system performance, where those uncertainties originating due to initial and boundary conditions, numerics, and modeling uncertainties. To improve the prediction of the reactor system performance, these various sources of uncertainties can be refined through model calibration technique. The objective of this work is to refine the model parameters and to estimate the uncertainties on parameters/responses during reflood phase. To accomplish this experiments should be performed, data collected, and the data utilized to complete model calibration for the thermal-hydraulic input parameters. Simulations were performed using Safety and Performance Analysis Code (SPACE) developed by multiple research institutes in South Korea to predict the thermal hydraulic system behaviors of nuclear power plants. Since existing experimental data were obtained from several tests performed at the small scale, scaling considerations must be addressed during the uncertainty quantification process. (authors)

42 ENGINEERING↗

Utilization of Streamtubes to Analyze the Physical Interaction of a Dispersed Cloud with the CRM65 Hybrid Midspan Model

Recently there have been numerous efforts to identify the relevant icing physics related to the formation of complex three dimensional features, sometimes referred to as ’scallops’, on swept wings. However, much of the physics is still not well understood. This paper computationally investigates the interaction of the icing cloud with the 65 percent Common Research Model (CRM65). Both the interaction with an uniced model, and the interaction with a representative simulated three dimensional ice accretion are analyzed. Preliminary results suggest that the liquid water content increases near the aerodynamic body. For small droplets on the uniced geometry, the particle velocity vector becomes nearly parallel with the aerodynamic model resulting in a low value of collection efficiency. When a three dimensional feature with a length scale much smaller than the leading edge of the airfoil is introduced into the flow, the impingement of small particles can become significantly more perpendicular to the particle velocity vector in the region of these features. Since the liquid water content near the body has increased due to the interaction with the larger scale features of the aerodynamic model, i.e. the leading edge of the swept wing, extremely high collection efficiency is observed. These results suggest that three dimensional features are likely a significant physical driver that should be modeled in some capacity when simulating the impingement of a cloud on an aerodynamic model.

Icing↗

Utilization of Streamtubes to Analyze the Physical Interaction of a Dispersed Cloud with the CRM65 Hybrid Midspan Model

Recently there have been numerous efforts to identify the relevant icing physics related to the formation of complex three dimensional features, sometimes referred to as ’scallops’, on swept wings. However, much of the physics is still not well understood. This paper computationally investigates the interaction of the icing cloud with the 65 percent Common Research Model (CRM65). Both the interaction with an uniced model, and the interaction with a representative simulated three dimensional ice accretion are analyzed. Preliminary results suggest that the liquid water content increases near the aerodynamic body. For small droplets on the uniced geometry, the particle velocity vector becomes nearly parallel with the aerodynamic model resulting in a low value of collection efficiency. When a three dimensional feature with a length scale much smaller than the leading edge of the airfoil is introduced into the flow, the impingement of small particles can become significantly more perpendicular to the particle velocity vector in the region of these features. Since the liquid water content near the body has increased due to the interaction with the larger scale features of the aerodynamic model, i.e. the leading edge of the swept wing, extremely high collection efficiency is observed. These results suggest that three dimensional features are likely a significant physical driver that should be modeled in some capacity when simulating the impingement of a cloud on an aerodynamic model.

Icing↗

iPNHOT: a knowledge-based approach for identifying protein-nucleic acid interaction hot spots

The interaction between proteins and nucleic acids plays pivotal roles in various biological processes such as transcription, translation, and gene regulation. Hot spots are a small set of residues that contribute most to the binding affinity of a protein-nucleic acid interaction. Compared to the extensive studies of the hot spots on protein-protein interfaces, the hot spot residues within protein-nucleic acids interfaces remain less well-studied, in part because mutagenesis data for protein-nucleic acids interaction are not as abundant as that for protein-protein interactions. In this study, we built a new computational model, iPNHOT, to effectively predict hot spot residues on protein-nucleic acids interfaces. One training data set and an independent test set were collected from dbAMEPNI and some recent literature, respectively. To build our model, we generated 97 different sequential and structural features and used a two-step strategy to select the relevant features. The final model was built based only on 7 features using a support vector machine (SVM). The features include two unique features such as ΔSASsa 1/2 and esp3, which are newly proposed in this study. Based on the cross validation results, our model gave F1 score and AUROC as 0.725 and 0.807 on the subset collected from ProNIT, respectively, compared to 0.407 and 0.670 of mCSM-NA, a state-of-the art model to predict the thermodynamic effects of protein-nucleic acid interaction. The iPNHOT model was further tested on the independent test set, which showed that our model outperformed other methods. Here, by collecting data from a recently published database dbAMEPNI, we proposed a new model, iPNHOT, to predict hotspots on both protein-DNA and protein-RNA interfaces. The results show that our model outperforms the existing state-of-art models. Our model is available for users through a webserver: http://zhulab.ahu.edu.cn/iPNHOT/.

59 BASIC BIOLOGICAL SCIENCES↗

Description of mixed-mode dynamics within the symplectic extension of the Interacting Vector Boson Model

In the algebraic Interacting Vector Boson Model (IVBM) it is assumed that the nuclear dynamics can be described by means of two types of vector “quasiparticles,” which are also characterized by another quantum number—a “T-spin” (an analogue to the F-spin). The non-compact symplectic group Sp (12, R ) appears as the group of dynamical symmetry for the problem of two interacting vector bosons. The symplectic structure allows the change in the number of phonons, needed to build the collective states, that results in larger model spaces, which can accommodate the more complex structural effects as observed in the contemporary experiment. The applications of the IVBM are extended by exploiting three new subgroup chains in the reduction of Sp (12, R ) to the physical angular momentum subgroup SO (3). The corresponding exactly solvable limiting cases are applied to achieve a description of complex nuclear collective spectra of even-even nuclei in the rare earth and actinide regions up to states of very high angular momentum. The first reduction that we exploit is one that extends the rotational limit of the number preserving version of the model; namely, Sp (12, R ) ⊃ U (6) ⊃ U (2) ⊗ SU (3). Another limit of the symplectic IVBM, Sp (12, R ) ⊃ Sp (2, R ) ⊗ SO (6), contains in a natural way the 6-dimensional Davidson potential. In both of these cases, because collective modes can be mixed, we obtain successful descriptions of both positive and negative parity band configurations. The structure of band-head configurations, whose importance is established in the first two limits, is also examined in a third reduction, Sp (12, R ) ⊃ Sp (4, R ) ⊗ SO (3). The distributions of energies that are obtained in this limit with respect to the number of bosons that build each of the states with fixed angular momentum, enables one to distinguish typical collective vibrational and rotational spectra. This algebraic chain also provides important links between the subgroups of the other limits. The symplectic extension of the IVBM permits a richer classification of the states than its unitary version and is shown to be appropriate for a description of rather diverse nuclear spectra.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Tests of a reduced-scale experimental model of a building solar heating-cooling system

An experimental solar heating and cooling system model has been built and operated, combining elements that are programmable (e.g., heating and cooling load of a building and collected solar energy) with experimental equipment. The experimental system model was based on the loads and components used in the Solar Building Test Facility (SBTF), which includes a 1394 sq m solar collector field at NASA Langley. These tests covered 5 continuous days under summer conditions. For the system model up to 55 percent of the simulated collected solar energy was used for the building load. This amount of solar energy supplied 35 percent of the building cooling load. Heat loss was significant. If tank heat loss were eliminated, which would make it similar to the actual SBTF, 75 percent of the collected solar energy would be used. This amount would supply approximately 50 percent of the building cooling load. A higher fraction of solar energy is possible with a more performance-optimized system.

Namkoong, D.↗

Investigation of octupole collectivity near the A = 72 shape-transitional point

Enhanced octupole collectivity is expected in the neutron-deficient Ge, Se and Kr isotopes with neutron number N ≈ 40 and has indeed been observed for 70,72 Ge. Shape coexistence and configuration mixing are, however, a notorious challenge for theoretical models trying to reliably predict octupole collectivity in this mass region, which is known to feature rapid shape changes with changing nucleon number and spin of the system. To further investigate the microscopic configurations causing the prolate-oblate-triaxial shape transition at A ≈ 72 and their influence on octupole collectivity, the rare isotopes 72 Se and 74,76 Kr were studied via inelastic proton scattering in inverse kinematics. While significantly enhanced octupole strength of ≈32 Weisskopf units (W.u.) was observed for 72 Se, only strengths of ≈15 W.u. were observed for 74,76 Kr. In combination with existing data, the new data clearly question a simple origin of enhanced octupole strengths around N = 40. Furthermore, the present work establishes two regions of distinct octupole strengths with a sudden strength increase around the A = 72 shape transitional point.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Simple description of odd-A nuclei around the critical point of the spherical to axially deformed shape phase transition

An analytically solvable model, X(3/2j+1), is proposed to describe odd-A nuclei near the X(3) critical point. The model is constructed based on a collective core described by the X(3) critical point symmetry coupled to a spin-j particle. A detailed analysis of the spectral patterns for cases j=1/2 and j=3/2 is provided to illustrate dynamical features of the model. By comparing theory with experimental data and results of other models, it is found that the X(3/2j+1) model can be taken as a simple yet very effective scheme to describe those odd-A nuclei with an even-even core at the critical point of the spherical to axially deformed shape phase transition.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Equations of two-fluid hydrodynamics in the Hubbard model

A set of equations is obtained using stationary and nonstationary superconductivity theories in terms of the Hubbard model. The equations near T{sub c} and for a weak magnetic field have the general form of superconductivity equations with a strongly anisotropic Fermi surface. Calculations are performed using a kinetic equation for quasiparticles. The low-temperature collective excitations in a superconductor are studied. An explicit relationship for the temperature dependence of second sound is obtained.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗