Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CEMENTING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,711 records · Page 95
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

Effect of irradiation on silicate aggregates’ density and stiffness

We report that when exposed to high-energy radiations, the silicate aggregates used in concrete can exhibit some swelling. This, in turn, can result in some internal stress, which can lead to micro-cracks or de-bonding along the cement–aggregate interface. However, there is presently some uncertainty regarding the long-term effect of such high-energy irradiation on aggregates and the associated risk of cracking and failure. Here, based on atomistic simulations, we investigate the effect of neutron irradiation on eight silicate minerals belonging to three different mineralogical families. We demonstrate that the irradiation-induced alterations do not depend on the silicate family but rather on the inherent structure and composition of each mineral. Interestingly, we show that vitrification can be used as a surrogate to assess the upper limit of irradiation-induced swelling. Further, we observe that this swelling potentially leads to high internal stresses, which can result in the initiation and propagation of cracks. Lastly, these findings can guide the selection of optimal aggregate minerals for which the risk of concrete failure upon irradiation is minimized.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Development of the technological process for the IGR reactor's highly-enriched irradiated uranium-graphite fuel immobilization

The immobilization of irradiated highly enriched uranium (HEU) fuel is a critical component of nuclear waste management and non-proliferation efforts. In Kazakhstan, at National Nuclear Center of the Republic of Kazakhstan special attention is given to managing legacy HEU fuel from research reactors. One such case involves the IGR research reactor, whose first core containing irradiated HEU uranium-graphite fuel was operated from 1961 to 1966 and removed following reactor modernization. This fuel now requires a reliable and secure immobilization strategy. Here, this paper presents the development of a technological process for immobilizing this fuel to reduce its enrichment to below 20 % in terms of 235U content. The proposed method involves down-blending irradiated HEU fuel with depleted uranium, followed by encapsulation in a Portland cement matrix. Full-scale experiments were conducted to assess the uniformity of uranium distribution within the matrix. The results confirm the effectiveness of this approach, ensuring reliable immobilization of fuel in accordance with international requirements, including IAEA standards and Kazakhstan's regulatory framework. These findings contribute to the broader effort of adapting immobilization strategies for the safe management of spent fuel from research reactors.

12 - MGMT OF RADIOACTIVE AND NON-RADIOACTIVE WASTE↗
DOE OSTI2023

Decarbonization of the Chemical Industry Through Electrification: Barriers and Opportunities

The chemical industry is a major source of economic productivity and employment globally and among the top 3 industrial sources of greenhouse gas (GHG) emissions, along with steel and cement. As global demand for chemical products continues to grow, there is an urgency to develop and deploy sustainable chemical production pathways and to reconsider continued investment in current emission-intensive production technologies. This perspective describes the challenges and opportunities to decarbonize the chemical industry via electrification powered by low-carbon electricity supply, both in the near term and long term, and it discusses four technological pathways ranging from the more mature direct substitution of heat with electricity and use of hydrogen to technologically less mature, yet potentially more selective, approaches based on electrochemistry and plasma. Finally, we highlight the key elements of integrating an electrified industrial process with the power sector to leverage process flexibility to reduce energy costs of chemical production and provide valuable power grid support services. Unlocking such plant-to-grid coordination and the four electrification pathways has significant potential to facilitate rapid and deep decarbonization of the chemical industry sector.

chemical synthesis↗
DOE OSTI2025

Roadmap to 100 GWDC: Scientific and supply chain challenges for CdTe photovoltaics

This roadmap highlights pathways to expand the CdTe module manufacturing capacity per year to 100 GW DC by 2030 by improving Te extraction from existing supply chains, minimizing Te usage in modules by leveraging thinner absorbers, and focusing research efforts in key areas to improve module efficiencies. Both scientific and supply chain innovations will be necessary to maintain the high compound annual growth rate of the CdTe photovoltaic (PV) industry and cement its role as a key technology for multi-TW-scale PV deployment.

14 SOLAR ENERGY↗
DOE OSTI2017

Laboratory pull-out tests on fully grouted rock bolts and cable bolts: Results and lessons learned

Laboratory pull-out tests were conducted on the following rock bolts and cable bolts: steel rebars, smooth steel bars, fiberglass reinforced polymer threaded bolts, flexible cable bolts, IR5/IN special cable bolts and Mini-cage cable bolts. The diameter of the tested bolts was between 16 mm and 26 mm. The bolts were grouted in a sandstone sample using resin or cement grouts. The tests were conducted under either constant radial stiffness or constant confining pressure boundary conditions applied on the outer surface of the rock sample. In most tests, the rate of displacement was about 0.02 mm/s. The tests were performed using a pull-out bench that allows testing a wide range of parameters. This paper provides an extensive database of laboratory pull-out test results and confirms the influence of the confining pressure and the embedment length on the pull-out response (rock bolts and cable bolts). Furthermore, it also highlights the sensitivity of the results to the operating conditions and to the behavior of the sample as a whole, which cannot be neglected when the test results are used to assess the bolt-grout or the grout–rock interface.

42 ENGINEERING↗
DOE OSTI2013

Structure refinements of members in the brownmillerite solid solution series Ca{sub 2}Al{sub x}(Fe{sub 0.5}Mn{sub 0.5}){sub 2-x}O{sub 5+{delta}} with 1/2{<=}x{<=}4/3

Four different brownmillerite solid solutions Ca{sub 2}Al{sub x}(Fe{sub 0.5}Mn{sub 0.5}){sub 2-x}O{sub 5+{delta}} with 1/2{<=}x{<=}4/3 were synthesized by a solid oxide ceramic method. The phases crystallize either in a primitive centered orthorhombic cell with space group Pnma or in a body centered cell with space group I2mb dependent on the aluminum concentration present in the solid solution. Mn{sup 3+} ions occupy exclusively site 4a coordinated by six oxygen anions. Increasing Mn{sup 3+} concentrations cause a remarkable distortion of the octahedron and indirectly of the tetrahedron, resulting in twisted and tilted octahedral layers as well as buckled tetrahedral chains. The influences are discussed on the site 4a of trivalent manganese due to its Jahn-Teller activity, with regard to the occupation of octahedron and tetrahedron with different sized iron and aluminum ions. - Graphical Abstract: The coupled substitution Fe{sup 3+}>Mn{sup 3+}+Fe{sup 3+} <=>2 Al{sup 3+} in brownmillerite phases (Ca{sub 2}(Fe{sub 0.5}Mn{sub 0.5}){sub 2-x}Al{sub x}O{sub 5+{delta}}) changes predominantly their structural properties, which is essential for the hydration performance of the calcium aluminate cement, where brownmillerites occur as clinker phases. Highlights: Black-Right-Pointing-Pointer We present structural data of four Ca-Al-Fe-Mn-brownmillerites. Black-Right-Pointing-Pointer Mn{sup 3+}-ions occupy exclusively the octahedrally coordinated site 0,0,0. Black-Right-Pointing-Pointer Bonds and angles of the octahedrally coordinated site are distorted strongly. Black-Right-Pointing-Pointer Mn{sup 3+}-ions influence indirectly the shape of the tetrahedron. Black-Right-Pointing-Pointer Mn{sup 3+}-ions stabilize Pnma instead of I2mb in Ca-Al-Fe-Mn-brownmillerites.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Assessment of structural, thermal, and mechanical properties of portlandite through molecular dynamics simulations

The structural, thermal, and mechanical properties of portlandite, the primary solid phase of ordinary hydrated cement paste, are investigated using the molecular dynamics method. To understand the effects of temperature on the structural properties of portlandite, the coefficients of thermal expansion of portlandite are determined in the current study and validated with what reported from the experimental tests. The atomic structure of portlandite equilibrated at various temperatures is then subjected to uniaxial tensile strains in the three orthogonal directions and the stress-strain curves are developed. Based on the obtained results, the effect of the direction of straining on the mechanical properties of portlandite is investigated in detail. Structural damage analysis is performed to reveal the failure mechanisms in different directions. The energies of the fractured surfaces are calculated in different directions and compared to those of the ideal surfaces available in the literature. The key mechanical properties, including tensile strength, Young's modulus, and fracture strain, are extracted from the stress-strain curves. The sensitivity of the obtained mechanical properties to temperature and strain rate is then explored in a systematic way. This leads to valuable information on how the structural and mechanical properties of portlandite are affected under various exposure conditions and loading rates. - Graphical abstract: Fracture mechanism of portlandite under uniaxial strain in the z-direction. - Highlights: • The structural, thermal, and mechanical properties of portlandite are investigated. • The coefficients of thermal expansion are determined. • The stress-strain relationships are studied in three orthogonal directions. • The effects of temperature and strain rate on mechanical properties are examined. • The plastic energy required for fracture in the crystalline structure is reported.

36 MATERIALS SCIENCE↗
DOE OSTI2017

The effects of burial diagenesis on multiscale porosity in the St. Peter Sandstone: An imaging, small-angle, and ultra-small-angle neutron scattering analysis

To examine the effects of burial diagenesis on heirarchical pore structures in sandstone and compare those with the effects of overgrowth formation, we obtained samples of St. Peter Sandstone from drill cores obtained in the Illinois and Michigan Basins. The multiscale pore structure of rocks in sedimentary reservoirs and the mineralogy associated with those pores are critical factors for estimating reservoir properties, including fluid mass in place, permeability, and capillary pressures, as well as geochemical interactions between the rock and the fluid. The combination of small- and ultra-small-angle neutron scattering with backscattered electron or X ray-computed tomographic imaging, or both, provided a means by which pore structures were quantified at scales ranging from aproximately 1 nm to 1 cm—seven orders of magnitude. Larger scale (>10 µm) porosity showed the expected logarithmic decrease in porosity with depth, although there was significant variation in each sample group. However, small- and ultra-small-angle neutron scattering data showed that the proportion of small-scale porosity increased with depth. Porosity distributions were not continuous, but consisted of a series of log normal-like distributions at several distinct scales within these rocks. Fractal dimensions at larger scales decreased (surfaces smoothed) with increasing depth, and those at smaller scales increased (surfaces roughened) and pores become more isolated (higher lacunarity). Furthermore, data suggest that changes in pore-size distributions are controlled by both physical (compaction) and chemical effects (precipitation, cementation, dissolution).

58 GEOSCIENCES↗
DOE OSTI2022

Illitization in the Mt. Simon Sandstone, Illinois Basin, USA: Implications for carbon dioxide storage

Clay mineral cementation is one of the most important controls on sandstone reservoir properties. Here, in this paper, the diagenetic history of the Mt. Simon reservoir complex is studied to reveal the origin, timing, and controls of illitization. Samples of sandstone and shale from Mt. Simon reservoir complex were acquired from the Illinois Basin–Decatur Project (IBDP), a CO 2 storage demonstration project in the central Illinois Basin. Petrographic, SEM, TEM, XRD analyses and K/Ar age dating were completed to identify the major detrital and diagenetic components of the samples and reveal illite to be the major clay component in all samples. Illitic clay coatings in the lower Mt. Simon reservoir are identified as a major control on reservoir properties by inhibiting major precipitation of authigenic quartz during illitization, resulting in highly permeable sandstone, essential for CO 2 storage. The coating box-work morphology and mineralogy are indicative of a detrital smectite origin with subsequent illite growth associated with feldspar dissolution and kaolinite alteration. The mineralogy of bulk material and separate grain size fractions (2–0.6 μm; 0.6–0.2 μm; < 0.2 μm) with illite polytypes 2M 1 , 1M, and 1M d were quantified and age dated via 40 K- 40 Ar methods. The shales or reservoir seals contain the highest proportions of detrital illite with illite in the lower Mt. Simon Sandstone reservoir identified as solely diagenetic. Two major events of illitization are identified throughout the Mt. Simon with more porous reservoir rock exhibiting the older event from approximately 360 to 315 Ma and tighter sandstone units with reservoir properties too low to be considered reservoir exhibiting illite dates from 250 to 220 Ma. This partitioning of illitization is attributed to varied mineralogy controlled by depositional changes and evolution of the greater basin.

58 GEOSCIENCES↗
DOE OSTI2014

Metallography and microstructure interpretation of some archaeological tin bronze vessels from Iran

Archaeological excavations in western Iran have recently revealed a significant Luristan Bronzes collection from Sangtarashan archaeological site. The site and its bronze collection are dated to Iron Age II/III of western Iran (10th–7th century BC) according to archaeological research. Alloy composition, microstructure and manufacturing technique of some sheet metal vessels are determined to reveal metallurgical processes in western Iran in the first millennium BC. Experimental analyses were carried out using Scanning Electron Microscopy–Energy Dispersive X-ray Spectroscopy and Optical Microscopy/Metallography methods. The results allowed reconstructing the manufacturing process of bronze vessels in Luristan. It proved that the samples have been manufactured with a binary copper–tin alloy with a variable tin content that may relates to the application of an uncontrolled procedure to make bronze alloy (e.g. co-smelting or cementation). The presence of elongated copper sulphide inclusions showed probable use of copper sulphide ores for metal production and smelting. Based on metallographic studies, a cycle of cold working and annealing was used to shape the bronze vessels. - Highlights: • Sangtarashan vessels are made by variable Cu-Sn alloys with some impurities. • Various compositions occurred due to applying uncontrolled smelting methods. • The microstructure represents thermo-mechanical process to shape bronze vessels. • In one case, the annealing didn’t remove the eutectoid remaining from casting. • The characteristics of the bronzes are similar to other Iron Age Luristan Bronzes.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Micro- and macro-scale characterization of nano-SiO2 reinforced alkali activated slag composites

Highlights: • Combined advanced micro-scale measurements were used to predict properties of NS AASC. • NS enhances both the macro- and micro-mechanical properties of AASC. • Combination of MIP and XCT facilitates a complete characterization of pore structure. • Combined tools at multi-scale provide efficient approaches to optimize material design. - Abstract: The effect of nano-SiO{sub 2} on the micromechanical properties and microstructure of alkali-activated slag cement (AASC) composites was investigated. The investigation involved the use of: (i) nanoindentation to determine the elastic properties of the constituent phases using statistical deconvolution; (ii) scanning electron microscopy equipped with energy-dispersive X-ray spectroscopy and backscattered electrons to identify and characterize the solid phases in the microstructure; and (iii) X-ray computed tomography microscopy to determine the morphology of microscale pores and mercury intrusion porosimetry to measure the volume fraction of the nanoscale pores. The combined use of micro- and macro-scale characterization tools can establish a logical link between the macro-mechanics, microstructure, and micromechanical properties, which provides valuable information aiding the material design of AASC with nanoparticles.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2018

Neutron scattering measurement of water content and chemical composition of alkali-glass powder reacted gel

Highlights: • Water absorption ability of alkali-glass powder reacted gel was largely reduced comparing other reported alkali-silica gels. • Both SAXS and SANS results showed similar internal structures of samples prepared with different H2O:D2O mixing ratios. • Neutron scattering method was developed to non-destructively determine gel water content and mass density of reacted gels. • Neutron scattering methods (based on scattering length density) on gel water content was validated with TGA measurement. - Abstract: Recent studies demonstrated that the added glass powder with high-alumina content could significantly reduce Alkali-Silica Reaction (ASR) damage in cement concrete. This paper aims to investigate the gel water content, chemical composition and expansion behavior of the alkali-glass powder reacted gel by using neutron scattering and other characterization techniques. Three types of samples were prepared with glass powder, sodium oxide and deuteroxide/hydrogen water with different molar ratios. The swelling potential of this alkali-glass powder reacted gel was much lower than that of the reported alkali-silica reacted gel. The gel water content and chemical compositions were characterized with small-angle neutron scattering (SANS) technique, supported by small-angle X-ray scattering (SAXS), prompt-gamma ray neutron activation analysis (PGAA) measurement. The SAXS test results showed the close scattering intensities, and thus similar internal microstructures among these samples. The elemental molar ratios of gels were obtained from the PGAA test results. Then the gel water molar ratio and mass density were determined by neutron scattering contrast calculation. The determined gel water content from neutron scattering analysis was validated with zero contrast analysis and TGA experimental measurement. Overall, this paper demonstrated the feasibility of using SANS technique to determine the water content of alkali-glass powder reacted gel.

36 MATERIALS SCIENCE↗
DOE OSTI2012

In situ synthesis of WC–Co nanocomposite powder via core–shell structure formation

Highlights: ► The hydrothermal method was firstly used to synthesize core–shell structured precursor to prepare WC–Co powder. ► WC–Co nanocomposite powder was obtained through in situ reduction and carbonization of the precursor in vacuum at 950 °C for 1 h. ► Particles of WC–Co composite indicated to have a crystallite size of 30–50 nm. -- Abstract: Cemented carbide WC–Co nanocomposite powders were synthesized through in situ reduction and carbonization of a core/shell precursor in vacuum. Samples were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), and high-resolution transmission electron microscopy (HRTEM). The results revealed that WC–Co composite powders can be obtained at 950 °C for 1 h and the particle size is in the range from 30 to 50 nm with good dispersion. The formation mechanism of the WC–Co composite by in situ reduction and carbonization reactions was proposed. The preparation process could be divided into three steps: first, the reagents were dissolved and mixed to an aqueous solution; second step is to synthesize a carbon encapsulated core/shell nanostructure precursor using hydrothermal route, and finally, in situ reduction and carbonization of the precursor to the desired nanocomposite powders in vacuum.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Irradiation of ultrasonic sensors and adhesive couplants for application in light water reactor primary loop piping and components

The Electric Power Research Institute (EPRI) Nuclear Sector and US Department of Energy Light Water Reactor Sustainability Program are committed to engaging in research and development endeavors to address materials aging issues specific to long term operation of light water power reactors. To this effect, EPRI launched an industry initiative to develop nondestructive evaluation systems for online monitoring of existing cracks in light water reactor primary coolant loop piping and components. One of the goals of this initiative is to develop a sensor system (or systems) that can determine nondestructively if cracks are growing or arrested and, in the case of the former, to characterize their growth rates. A missing component of this initiative is an experimental assessment of how sensors and adhesive couplants will perform in service when exposed to chronic energetic neutron radiation, particularly at the primary coolant loop hot and cold leg dissimilar metal welds, which join the primary loop piping to the reactor pressure vessel and reside in the vicinity of the reactor core. The objective of this experimental study was to determine how ultrasonic transducers and adhesive couplants perform when exposed to irradiation in a test reactor to simulate and accelerate in-service exposure. Further, to achieve this objective, the signal stability of piezoelectric transducers and performance of adhesive couplants as a function of accumulated fast neutron fluence were characterized by collecting ultrasonic data in-situ during irradiation. Of particular interest were the ultrasonic signal quality and time decay of the amplitude of acoustic reflections as a function of fast neutron fluence. The results of the study showed that, of the 8 transducer/substrate sample assemblies tested, only 3 generated usable ultrasonic signals through the conclusion of the irradiation campaign. It was found that high temperature epoxy tends to ultrasonically couple the sensors to the substrates better than three types of refractory ceramic cements studied, as is supported by post irradiation examination. The results obtained through this experimental study will be utilized in the achievement of the overall goal of development of a sensor system to perform online monitoring of primary loop components.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2019

Impact of Brine/CO 2 exposure on the transport and mechanical properties of the Mt Simon sandstone

When sandstone rocks are exposed to CO 2 -saturated brine, their transport and mechanical properties can change due to brine/CO 2 -induced chemical reactions. The present study investigates the change in the flow-through characteristics, porosity, and the mechanical behavior of Mt. Simon Sandstone samples caused by exposure to brine/CO 2 . The cores, extracted from a depth interval of 2110.4–2111.4 m (6924–6927 ft) in the Mt. Simon formation, were first characterized for their mechanical and transport properties, and then aged in CO 2 -saturated brine at pressures of 17.24 MPa (2500 psi) and temperature of 50°C for one to two weeks. Following that, the changes in the transport and mechanical properties of the samples were analyzed using He pycnometry, flow perporometry and triaxial testing. Our experiments show that the porosity of the Mt. Simon samples slightly increases after exposure to CO 2 /brine, while the permeability increases more substantially depending on the stress state. Measurements of the flow-through pore size distribution (PSD) are indicative of the changes occurring and are consistent with the observed increases in permeability. Nitrogen adsorption tests (BET), before and after incubation, show a significant loss of pore volume in the mesoporous range that is indicative of clay dissolution. Weakening of the materials was observed based on the mechanical properties studied, a result that is consistent with the observed dissolution of clays that play a central role in the cementation of the quartz grains. Finally, the analysis of the brine compositions reveals an increase in concentration of most cations after incubation with the Mt. Simon cores. This is also consistent with mineral/clay dissolution, confirmed by the porosity, transport, and mechanical property measurements as well as electron microscopy analysis of the same samples.

58 GEOSCIENCES↗
DOE OSTI2021

In-situ 4D visualization and analysis of temperature-driven creep in an oil shale propped fracture

Here, the proppant embedment due to creep in shales is a known issue affecting the useable lifetime of wells in unconventional oil and gas recovery. One of the factors influencing creep is the presence of organics, whose properties can be very sensitive to temperature. In this work we investigated for the first time the role of temperature-induced creep increase in proppant embedment in an organics-rich Green River oil shale sample via in-situ synchrotron X-ray micro-computed tomography. We observed that temperatures as low as 75 °C already induce fast creep, with a fracture aperture closing rate of 13 μm/h and a loss of fracture conductivity rate of 8.7%/h, due only to proppant embedment, in the measured interval at the first heating stage. Local displacement data analysis provided evidence for markedly plastic deformation around the proppant-shale contacts, in contrast with the brittle proppant embedment observed on more cemented and less organics-rich shales at room temperature. The results highlight how the problem of temperature-dependent mechanical behavior might be more important than previously thought, in shales with a high content in organics, and that in-situ micro-imaging techniques can play a key role in understanding the underlying mechanisms, contributing to solve creep-related problems associated with hydraulic fracturing in complex scenarios.

02 PETROLEUM↗