Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CALCULATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,711 records · Page 95

Exploring the kinetics of actinyl–EDTA reduction by ferrous iron using quantum-mechanical calculations

Here, the reduction of An(VI) (An = U, Np, and Pu) to An(IV) significantly decreases its solubility and mobility. This reaction can be hindered by complexation with inorganic (e.g., carbonate) or organic ligands. Ethylenediaminetetraacetic acid (EDTA) is one such organic ligand that forms stable complexes with actinides. Therefore, it may enhance the mobility of actinides. However, the redox kinetics and mechanisms of actinyl (An(V/VI)O 2 +/2+ )–EDTA are not well characterized yet and are thus studied here using quantum-mechanical calculations. The principle is to approach the actinyl–EDTA and Fe 2+ (reductant) in small incremental steps and calculate the system energy at each distance. The overall reaction is then delineated into sub-processes (encounter frequency in bulk solution, formation of outer-sphere complex, transition from outer- to inner-sphere complex, and electron transfer), and reaction rates are determined for each sub-process. The formation of outer-sphere complexes occurs rapidly in microseconds to seconds over a wide range of actinyl concentrations (pM to μM); in contrast, the transition to the inner-sphere complex is relatively slow (milliseconds to a few seconds). Immediate electron transfer to form the pentavalent actinide is observed along the reaction path for Np(VI) and Pu(VI), but not for U(VI). Surprisingly, in acidic conditions, one of the carboxylic groups gets protonated in EDTA of [UO 2 (edta)] 2- rather than one of the amino groups. This process-based series of calculations can be applied to any redox reaction and allows the prediction of changes to the rate law and rate-limiting step in a more fundamental way for different environments

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Implementation of Feldman-Cousins Corrections and Oscillation Calculations in the HPC Environment for the NOvA Experiment

Analysis of neutrino oscillation data involves a combination of complex fitting procedures and statistical correction techniques that are used to determine the full three-flavor PMNS parameters and constraint contours. These techniques rely on computationally intensive “multi-universe” stochastic modeling. The process of calculating these contours and corrections can dominate final stages of the data analysis and become a bottleneck for examining the ef-fect of systematic variations on the final results. As part of the DOE SciDAC-4 sponsored research program, we present a new implementation of a neutrino oscillation fitting and framework to carry out calculations of Feldman-Cousins corrections. This implementation is specifically designed and optimized to operate on modern High-Performance Computing (HPC) facilities. We present the performance of the system in calculating allowed regions for the NOvA experiment based on 8.9 x 1020 and 6.9 x 1020 protons-on-target (POT) neutrino and antineutrino datasets, and compare the performance of this new implementation run at the NERSC supercomputing facility with that from methods used previously by the NOvA collaboration running on grid computing facilities.

Sousa, Alexandre↗

First-principles calculation of defect formation energies and electronic properties in stannate pyrochlores

The electronic structures and defect formation energies for a series of stannate pyrochlores Ln2Sn2O7 *Ln=La, Pr, Nd, Sm, Gd, Tb, Ho, Er, Lu, and Y* have been investigated using the first-principles total energy calculations. The calculated results show that Ln-site cation ionic radius, x-O48f, lattice constant and the covalency of the *Sn–O48f* bond have a significant affect on the defect formation energies. The cation-antisite defect has the lowest formation energy, as compared with that of other defects, indicating that cation disorder causes local oxygen disordering. The present studies suggest that Lu2Sn2O7 is the most resistant to ion beam-induced amorphization. The electronic structure calculations reveal that Ln2Sn2O7 compounds have direct band gaps of 2.64– 2.95 eV at the * point in the Brillouin zone. © 2008 American Institute of Physics.

36 MATERIALS SCIENCE↗

Multi-Code Ab Initio Calculation of Ionization Distributions and Radiation Losses for Tungsten in Tokamak Plasmas

We present calculations of ionization balance and radiative power losses for tungsten in magnetic fusion plasmas. The simulations were performed within the framework of Non-Local Thermodynamic Equilibrium (NLTE) Code Comparison Workshops utilizing several independent collisional-radiative models. The calculations generally agree with each other; however, a clear disagreement with experimental ionization distributions at low temperatures 2 keV<T{sub e}<3 keV is observed. Comparison is made with other calculations. The obtained results can be used in planning new experiments in magnetic confinement fusion.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Short-time Fourier transform analysis of real-time time-dependent Hartree–Fock and time-dependent density functional theory calculations with Gaussian basis functions

We propose a novel analysis of real-time (RT) time-dependent Hartree–Fock and time-dependent density functional theory (TDHF/TDDFT) calculations using a short-time Fourier transform (STFT) technique. RT-TDHF/TDDFT calculations of model dimers were carried out and analyzed using the STFT technique, in addition to the usual Fourier transform (FT). STFT analysis revealed that the induced polarization propagated between the molecules through the intermolecular interaction; that is, it directly showed the electron dynamics of the excited system. The dependence of the propagation period on the intermolecular distance of the dimer was investigated. We also proved the possibility of describing, not just the valence, but also the core excitations by FT analysis of the RT-TDHF/TDDFT calculations of a formaldehyde monomer with Gaussian basis functions compared with conventional TDHF/TDDFT results.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Crystal Field Parameters and Energy Levels Calculations for Fe{sup 3+}:ZnGa{sub 2}O{sub 4}

In this paper, we present a theoretical study of the energy levels structure for the zinc gallate normal spinel, ZnGa{sub 2}O{sub 4}, doped with Fe{sup 3+}(3d{sup 5} configuration) ions. The calculations have been performed in the framework of the exchange charge model (ECM) of the crystal field. After calculating the CFPs, based on the geometrical structure of the host matrix, the crystal field Hamiltonian was diagonalized in the space spanned by the wave functions of all 16 LS terms of the 3d{sup 5} electron configurations. The Racah parameters B, C and G parameter of the exchange charge model have been estimated. The results of the theoretical calculations are in satisfactory agreement with the experimental data.

36 MATERIALS SCIENCE↗

Ideal and resistive edge stability calculations with M3D-C{sup 1}

Growth rates of edge localized modes for various benchmark equilibria, including a diverted equilibrium, are calculated using the nonideal fluid code M3D-C{sup 1}. Growth rates calculated by M3D-C{sup 1} in the ideal limit are found to agree with those calculated by ideal magnetohydrodynamics codes. The effects of nonuniform density and resistivity profiles are explored, as well as the sensitivity of growth rates to the position of the ideal vacuum-plasma interface. Growth rates of the diverted equilibrium are found to be particularly sensitive to moving this interface inward from the separatrix, but less sensitive to extending the plasma region beyond the separatrix. The resistivity profile within the plasma is found not to affect growth rates significantly; however, growth rates may be greatly reduced by treating the outer region as a resistive plasma instead of an ideal vacuum. Indeed, it is found that for typical scrape-off layer (SOL) temperatures, the resistive SOL model behaves more like an ideal plasma than a vacuum.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Fast closed-form calculation of THz field enhancement in a metal nanoslit

Strong electric field enhancement in a metal nanoslit with THz field illumination is hardly calculated using the standard simulation packages. It is explained by the considerable difference of the values of nano sizes of the slit and the wavelength of the incident radiation (up to 10000 times). Therefore, significant computational resources or/and the home-made simulation code is needed. We offer the simple single-parameter model as an alternative to the time consuming calculations. The single parameter can be calculated either from the experimental or simulation data (one reference point is necessary to determine one parameter). Then we can find the field enhancement for different slit geometries and light wavelengths.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Calculation of spatial distribution of optical escape factor and its application to He I collisional-radiative model

An integral analytical formula for a spatial distribution of the optical escape factor (OEF) in an infinite cylindrical plasma is derived as a function of an arbitrary upper state spatial density profile, the temperature ratio of the upper state to the lower state, and the optical depth of the corresponding transition. Test calculations are carried out for three different upper state profiles, i.e., uniform (rectangular), parabolic, and Gaussian upper state profiles. The OEF takes on negative values at the periphery of the parabolic and Gaussian upper state profiles. These characteristics cannot be expressed by the conventional OEF formulas derived for the center of the plasma, even though the optical depth is increased. In addition to the analytical derivation of the formula, two practical formulas are proposed: an empirical formula of the spatial distribution of the OEF for the Gaussian upper state density profile and a linear formula of the OEF distribution for upper state profiles that are expressed as linear combinations. These formulas enable us to calculate the spatial distribution of the OEF for the multiple-Gaussian upper state profile without the need for time-consuming integral calculations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Calculation and Verification of a Planar Pencil Beam Kernel Through the Hankel Transform of Measured OARs for a Radiosurgery System with Cones

A planar multienergetic pencil beam kernel with rotational symmetry is calculated for a stereotactic radiosurgery system, SRS, BrainLAB with cones, employing the deconvolution method of the off axis ratio profile, OAR, corresponding to the cone of 35 mm in diameter for a 6 MV photon beam produced by a linear accelerator Varian 2100 C/D. Before the deconvolution, the experimental OAR is corrected for beam divergence and variations of the spectral fluence {Phi}, using a boundary function BF. The function BF and the fluence {Phi} are transformed to the conjugate space with the zero order Hankel function, which is the appropriate transform due to the radial symmetry of the circular beams generated by the cones. The kernel in the conjugate space is obtained as the ratio of the transform of BF to the transform of {Phi}, therefore the kernel in the real space is calculated as the inverse transform of the kernel in the conjugate space. To validate the kernel in the real space, it is convolved with the fluence of the cones of 7.5, 12.5, 15, 17.5, 20, 22.5, 25, 30 and 35 mm in diameter. The comparison of the OARs calculated and measured shows a maximum difference of 4.5% in the zones of high gradient of dose, and a difference less than 2% in the regions of low gradient of dose. Finally, the expanded uncertainty of the kernel is estimated and reported.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Photoisomerization mechanism of 4-methylpyridine explored by electronic structure calculations and nonadiabatic dynamics simulations

In the present paper, different electronic structure methods have been used to determine stationary and intersection structures on the ground (S{sub 0}) and {sup 1}{pi}{pi}* (S{sub 2}) states of 4-methylpyridine, which is followed by adiabatic and nonadiabatic dynamics simulations to explore the mechanistic photoisomerization of 4-methylpyridine. Photoisomerization starts from the S{sub 2}({sup 1}{pi}{pi}*) state and overcomes a small barrier, leading to formation of the prefulvene isomer in the S{sub 0} state via a S{sub 2}/S{sub 0} conical intersection. The ultrafast S{sub 2}{yields} S{sub 0} nonradiative decay and low quantum yield for the photoisomerization reaction were well reproduced by the combined electronic structure calculation and dynamics simulation. The prefulvene isomer was assigned as a long-lived intermediate and suggested to isomerize to 4-methylpyridine directly in the previous study, which is not supported by the present calculation. The nonadiabatic dynamics simulation and electronic structure calculation reveal that the prefulvene isomer is a short-lived intermediate and isomerizes to benzvalene form very easily. The benzvalene form was predicted as the stable isomer in the present study and is probably the long-lived intermediate observed experimentally. A consecutive light and thermal isomerization cycle via Dewar isomer was determined and this cycle mechanism is different from that reported in the previous study. It should be pointed out that formation of Dewar isomer from the S{sub 2}({sup 1}{pi}{pi}*) state is not in competition with the isomerization to the prefulvene form. The Dewar structure observed experimentally may originate from other excited states.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

First-principles calculations of phase transition, elastic modulus, and superconductivity under pressure for zirconium

The elasticity, dynamic properties, and superconductivity of {alpha}, {omega}, and {beta} Zr upon compression are investigated by using first-principles methods. Our calculated elastic constants, elastic moduli, and Debye temperatures of {alpha} and {omega} phases are in excellent agreement with experiments. Electron-phonon coupling constant {lambda} and electronic density of states at the Fermi level N (E{sub F}) are found to increase with pressure for these two hexagonal structures. For cubic {beta} phase, the critical pressure for mechanical stability is predicted to be 3.13 GPa and at P = 4 GPa the low elastic modulus (E=31.97 GPa) can be obtained. Besides, the critical pressure for dynamic stability of {beta} phase is achieved by phonon dispersion calculations to be {approx}26 GPa. Over this pressure, {lambda} and N (E{sub F}) of {beta} phase decrease upon further compression. Our calculations show that the large value of superconducting transition temperature T{sub c} at 30 GPa for {beta} Zr is mainly due to the TA1 soft mode. Under further compression, the soft vibrational mode will gradually fade away.

36 MATERIALS SCIENCE↗

An accurate symplectic calculation of the inboard magnetic footprint from statistical topological noise and field errors in the DIII-D

Any canonical transformation of Hamiltonian equations is symplectic, and any area-preserving transformation in 2D is a symplectomorphism. Based on these, a discrete symplectic map and its continuous symplectic analog are derived for forward magnetic field line trajectories in natural canonical coordinates. The unperturbed axisymmetric Hamiltonian for magnetic field lines is constructed from the experimental data in the DIII-D [J. L. Luxon and L. E. Davis, Fusion Technol. 8, 441 (1985)]. The equilibrium Hamiltonian is a highly accurate, analytic, and realistic representation of the magnetic geometry of the DIII-D. These symplectic mathematical maps are used to calculate the magnetic footprint on the inboard collector plate in the DIII-D. Internal statistical topological noise and field errors are irreducible and ubiquitous in magnetic confinement schemes for fusion. It is important to know the stochasticity and magnetic footprint from noise and error fields. The estimates of the spectrum and mode amplitudes of the spatial topological noise and magnetic errors in the DIII-D are used as magnetic perturbation. The discrete and continuous symplectic maps are used to calculate the magnetic footprint on the inboard collector plate of the DIII-D by inverting the natural coordinates to physical coordinates. The combination of highly accurate equilibrium generating function, natural canonical coordinates, symplecticity, and small step-size together gives a very accurate calculation of magnetic footprint. Radial variation of magnetic perturbation and the response of plasma to perturbation are not included. The inboard footprint from noise and errors are dominated by m=3, n=1 mode. The footprint is in the form of a toroidally winding helical strip. The width of stochastic layer scales as (1/2) power of amplitude. The area of footprint scales as first power of amplitude. The physical parameters such as toroidal angle, length, and poloidal angle covered before striking, and the safety factor all have fractal structure. The average field diffusion near the X-point for lines that strike and that do not strike differs by about three to four orders of magnitude. The magnetic footprint gives the maximal bounds on size and heat flux density on collector plate.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Unusual mechanism for H{sub 3}{sup +} formation from ethane as obtained by femtosecond laser pulse ionization and quantum chemical calculations

The formation of H{sub 3}{sup +} from saturated hydrocarbon molecules represents a prototype of a complex chemical process, involving the breaking and the making of chemical bonds. We present a combined theoretical and experimental investigation providing for the first time an understanding of the mechanism of H{sub 3}{sup +} formation at the molecular level. The experimental approach involves femtosecond laser pulse ionization of ethane leading to H{sub 3}{sup +} ions with kinetic energies on the order of 4 to 6.5 eV. The theoretical approach involves high-level quantum chemical calculation of the complete reaction path. The calculations confirm that the process takes place on the potential energy surface of the ethane dication. A surprising result of the theoretical investigation is, that the transition state of the process can be formally regarded as a H{sub 2} molecule attached to a C{sub 2}H{sub 4}{sup 2+} entity but IRC calculations show that it belongs to the reaction channel yielding C{sub 2}H{sub 3}{sup +}+ H{sub 3}{sup +}. Experimentally measured kinetic energies of the correlated H{sub 3}{sup +} and C{sub 2}H{sub 3}{sup +} ions confirm the reaction path suggested by theory.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Binding of hydrogen on benzene, coronene, and graphene from quantum Monte Carlo calculations

Quantum Monte Carlo calculations with the diffusion Monte Carlo (DMC) method have been used to compute the binding energy curves of hydrogen on benzene, coronene, and graphene. The DMC findings on benzene agree with both Møller–Plessett second order perturbation theory (MP2) and coupled cluster with singles, doubles, and perturbative triples [CCSD(T)] calculations, giving an adsorption energy of ~25 meV. For coronene, DMC agrees well with MP2, giving an adsorption energy of ~40 meV. For physisorbed hydrogen on graphene, DMC suggests a very small adsorption energy of only 5 ± 5 meV. Density functional theory (DFT) calculations with various exchange-correlation functionals, including van der Waals corrected functionals, predict a wide range of binding energies on all three systems. These DMC results are a step toward filling the gap in accurate benchmark data on weakly bound systems. These results can help us to understand the performance of current DFT based methods, and may aid in the development of improved approaches.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

AX Centers in II-VI Semiconductors: Hybrid Functional Calculations

Hybrid functional calculations predict significantly enhanced stability of AX centers against shallow acceptors in selected II-VI semiconductors (ZnO, ZnS, and ZnSe), as compared to the calculations based on local density approximation and generalized gradient approximation. The results agree well with the experimental observations on the p-type doping of ZnS and ZnSe. The improved description of the AX centers by hybrid functional calculations is due to the correction of the valence band maximum of the semiconductor.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Accurate Cross-section Calculations for Low-Energy Electron-Atom Collisions

We describe a recently developed fully relativistic B-spline R-matrix method for atomic structure as well as calculations for electron and photon collision with atoms and ions. The method is based on the solution of the many-electron Fock-Dirac equation and allows to employ non-orthogonal sets of atomic orbitals. A B-spline basis is used to generate both the target description and the R-matrix basis functions in the inner region. Employing B-splines of different orders for the large and small components prevents the appearance of spurious states in the spectrum of the Dirac equation. Using term-dependent and thus nonorthogonal sets of one-electron functions enables us to generate accurate and flexible representations of the target states and the scattering function. Our method is based upon the Dirac-Coulomb Hamiltonian and thus may be employed for any complex atom or ion, without the use of phenomenological core potentials. Example results from recent applications of the method for accurate calculations of low-energy electron scattering from noble gases are presented. In most cases we obtained a substantial improvement over results obtained in previous Breit-Pauli R-matrix calculations.

74 ATOMIC AND MOLECULAR PHYSICS↗

Distinguishing Between Relaxation Pathways by Combining Dissociative Ionization Pump Probe Spectroscopy and Ab Initio Calculations: A Case Study of Cytosine

We present a general method for tracking molecular relaxation along different pathways from an excited state down to the ground state. We follow the excited state dynamics of cytosine pumped near the S0-S1 resonance using ultrafast laser pulses in the deep ultraviolet and probed with strong field near infrared pulses which ionize and dissociate the molecules. The fragment ions are detected via time of flight mass spectroscopy as a function of pump probe delay and probe pulse intensity. Our measurements reveal that different molecular fragments show different timescales, indicating that there are multiple relaxation pathways down to the ground state. We interpret our measurements with the help of ab initio electronic structure calculations of both the neutral molecule and the molecular cation for different conformations en route to relaxation back down to the ground state. Our measurements and calculations show passage through two seams of conical intersections between ground and excited states and demonstrate the ability of dissociative ionization pump probe measurements in conjunction with ab initio electronic structure calculations to track molecular relaxation through multiple pathways.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗