Purcell-Induced Bright Single Photon Emitters in Hexagonal Boron Nitride
Not Available
SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Not Available
Here, chemical vapor deposition (CVD) has been established as the most effective way to grow large area two-dimensional materials. Direct study of the etching process can reveal subtleties of this competing with the growth reaction and thus provide the necessary details of the overall growth mechanism. Here we investigate hydrogen-induced etching of hBN and graphene and compare the results with the classical kinetic Wulff construction model. Formation of the anisotropically etched holes in the center of hBN and graphene single crystals was observed along with the changes in the crystals' circumference. We show that the edges of triangular holes in hBN crystals formed at regular etching conditions are parallel to B-terminated zigzags, opposite to the N-terminated zigzag edges of hBN triangular crystals. The morphology of the etched hBN holes is affected by a disbalance of the B/N ratio upon etching and can be shifted toward the anticipated from the Wulff model N-terminated zigzag by etching in a nitrogen buffer gas instead of a typical argon. For graphene, etched hexagonal holes are terminated by zigzag, while the crystal circumference is gradually changing from a pure zigzag to a slanted angle resulting in dodecagons.
Not Available
Not Available
Not Available
Explore the source record for details and available documents.
The feasibility of synthesizing functionalized h-BN (FBN) via the reaction between molten LiOH and solid h-BN is studied for the first time and its first ever application as an electrode material in Li-ion batteries is evaluated. Density functional theory (DFT) calculations are performed to provide mechanistic understanding of the possible electrochemical reactions derived from the FBN. Various materials characterizations reveal that the melt-solid reaction can lead to exfoliation and functionalization of h-BN simultaneously, while electrochemical analysis proves that the FBN can reversibly store charges through surface redox reactions with good cycle stability and coulombic efficiency. As a result, the DFT calculations have provided physical insights into the observed electrochemical properties derived from the FBN.
Incorporation of heteroatoms in carbon materials is commonly expected to influence their physical or chemical properties. Furthermore, contrary to previous results for methane adsorption, no technologically significant effect was identified for the hydrogen physisorption energies (measured 4.1–4.6 kJ mol –1 and calculated q st = –ΔH ads = 4.1 ± 0.7 kJ mol –1 using a comprehensive set of levels of theory) as a function of B- and N-substitution of a mid-plane C-site on open carbon surfaces.
We demonstrate the formation of superparamagnetic/ferromagnetic regions within ZnO(0001) single crystals sequently implanted with B and Co. While the pre-implantation with B plays a minor role for the electrical transport properties, its presence leads to the formation of amorphous phases. Moreover, B acts strongly reducing on the implanted Co. Thus, the origin of the ferromagnetic ordering in local clusters with large Co concentration is itinerant d-electrons as in the case of metallic Co. The metallic amorphous phases are non-detectable by common X-ray diffraction.
Precise determination of acceptors in the laser ablation grown B doped single-walled carbon nanotubes (SWCNTs) has been elusive. Photoemission spectroscopy finds evidence for subpercent substitutional B in this material, which leads to superconductivity in thin film SWNT samples.
B{sub 12}As{sub 2}/SiC pn heterojunction diodes based on the radiation-hard B{sub 12}As{sub 2} deposited on (0001) n-type 4H-SiC via chemical vapor deposition were demonstrated. The diodes exhibit good rectifying behavior with an ideality factor of 1.8 and a leakage current as low as 9.4 x 10{sup -6} A/cm{sup 2}. Capacitance-voltage measurements using a two-frequency technique showed a hole concentration of - 1.8-2.0 x 10{sup 17} cm{sup -3} in B{sub 12}As{sub 2} with a slight increase near the interface due to the presence of an interfacial layer to accommodate lattice mismatch. Band offsets between the B{sub 12}As{sub 2} and SiC were estimated to be - 1.06 eV and 1.12 eV for conduction band and valance band, respectively.
We carried out a comprehensive study on the B1s core-level X-ray photoelectron spectroscopy (XPS) binding energies for B clusters in crystalline Si using a first-principles calculation with careful evaluation of the local potential boundary condition for the model system, where convergence within 0.1 eV was confirmed for the supercell size. For ion-implanted samples, we identified experimental peaks due to B clusters and threefold B as icosahedral B{sub 12} and <001>B-Si defects, respectively. For as-doped samples prepared by plasma doping, it was found that the calculated XPS binding energies for complexes of vacancies and B atoms were consistent with the experimental spectra.
The effect of B concentration on the tunneling magnetoresistance (TMR) of (Co{sub 25}Fe{sub 75}){sub 100-x}B{sub x}/MgO/(Co{sub 25}Fe{sub 75}){sub 100-x}B{sub x} (x = 22 and 33) pseudo-spin-valve (P-SV) magnetic tunnel junctions (MTJs) was investigated. The TMR ratios for optimally annealed MTJs with x = 22 and 33 were 340% and 170%, respectively, at room temperature. High resolution transmission electron microscopy (HRTEM) observation showed a weaker (001) texture in the MgO barrier in the MTJ with x = 33. The bottom electrode was not fully crystallized even with a considerable amount of B in the (Co{sub 25}Fe{sub 75}){sub 67}B{sub 33}, while good epitaxy was observed between (001) textured MgO and (Co{sub 25}Fe{sub 75}){sub 78}B{sub 22} electrodes.
We perform first-principles density functional calculations to find the migration pathway and barrier for B diffusion at the Si/SiO{sub 2} interface. For various interface models, in which crystalline α-quartz or amorphous silica (a-SiO{sub 2}) is placed on Si, we examine stable and metastable configurations of B-related defects which play a role in B diffusion. While a substitutional B alone is immobile in Si, it tends to diffuse to the interface via an interstitialcy mechanism in the presence of a self-interstitial and then changes into an interstitial B in oxide via a kick-out mechanism, leaving the self-interstitial at the interface. At the defect-free interface, where bridging O atoms are inserted to remove interface dangling bonds, an interstitial B prefers to intervene between the interface Si and bridging O atoms and subsequently diffuses through the hollow space or along the network of the Si-O-Si bonds in oxide. The overall migration barriers are calculated to be 2.02–2.12 eV at the Si/α-quartz interface, while they lie in the range of 2.04 ± 0.44 eV at the Si/a-SiO{sub 2} interface, similar to that in α-quartz. The migration pathway and barrier are not significantly affected by interface defects such as suboxide bond and O protrusion, while dangling bonds in the suboxide region can increase the migration barrier by about 1.5 eV. The result that the interface generally does not hinder the B diffusion from Si to SiO{sub 2} assists in understanding the underlying mechanism for B segregation which commonly occurs at the Si/SiO{sub 2} interface.
The effect of rapid thermal processing (RTP) on the formation of copper precipitation in p/p{sup +} silicon (Si) epitaxial wafers was systematically investigated by defect etching and optical microscopy. After RTP preannealing at high temperature (1250 °C/60 s, with cooling rate 30 K/s) followed by the 750 °C/8 h + 1050 °C/16 h low-high (L-H) two-step annealing, it was revealed that the bulk microdefects were found only inside the p{sup +} substrate, manifesting no defects generated in the epitaxial layer. However, it was found that the width of denude zone (DZ) in samples only subjected to L-H two-step annealing was narrower than that of epitaxial layer, which meant that oxygen precipitation was formed in epitaxial layer. It can be concluded that RTP was beneficial to the formation of DZ. Additionally, it was found that the width of DZ has a sharp dependence on the introducing temperature of copper contamination, that is, the corresponding equilibrium concentration of interstitial copper in the Si influence the thermodynamics and kinetics process of the formation of copper precipitation significantly.