Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Accident”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,711 records · Page 95

The MacArthur Maze Fire and Roadway Collapse: Consequences for SNF Transportation - 12476

In 2007, a severe transportation accident occurred near Oakland, California, on a section of Interstate 880 known as the 'MacArthur Maze', involving a tractor trailer carrying gasoline which impacted an overpass support column and burst into flames. The subsequent fire caused the collapse of portions of the Interstate 580 overpass onto the remains of the tractor-trailer in less than 20 minutes, due to a reduction of strength in the structural steel exposed to the fire. The US Nuclear Regulatory Commission is in the process of examining the impacts of this accident on the performance of a spent nuclear fuel transportation package, using detailed analysis models, in order to determine the potential regulatory implications related to the safe transport of spent nuclear fuel in the United States. This paper will provide a summary of this effort and present results and conclusions. The detailed thermal models of the MacArthur Maze fire scenario with ANSYS and COBRASFS have produced preliminary results indicating that in a fire of this severity, the peak fuel cladding temperature would almost certainly exceed the short-term limit of 570 deg. C (1058 deg. F), and would likely exceed the Zircaloy burst temperature limit of 750 deg. C (1382 deg. F) assumed in previous transportation studies. Additional work is needed to refine and verify some of the details of these complex models, but the overall results are consistent with previous fire analyses with similar models, and with the results obtained for the HAC fire evaluations with these models. These results as well as future results produced by these models can therefore be considered as reliable estimates of the temperatures that would be experienced in fire conditions of the severity of the MacArthur Maze fire scenario. The structural analyses show that the GA-4 package is robust enough to withstand the impact of the overhead span without suffering major damage or deformation to the containment boundary. The greatest potential for local package damage in this scenario appears to be at the bolted closure end. The thermal expansion response of the closure bolts and impact limiter attachment bolts were evaluated in a separate analysis, and it was determined that both the lid and impact limiters are expected to remain in place. The response of the closure seal is currently being evaluated separately in the context of the accident's overall potential to release radioactive material in the environment. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

U.S. department of energy safety design strategy review and approval beyond critical decision 3 for the high-level waste facility - 15525

The Waste Treatment and Immobilization Plant (WTP) in Hanford, Washington, is the nation's largest environmental remediation construction project. In 2012, at the WTP's High-Level Waste (HLW) Facility, the U.S. Department of Energy (DOE), Office of River Protection (ORP) restricted construction work at the Hazard Category 2 nuclear facility because of unresolved technical issues associated with the facility and of misalignment of the design and nuclear safety basis. By 2013, as additional issues were discovered, ORP limited HLW design and procurement activities. Addressing the technical issues and the misalignment of the design basis with the Preliminary Documented Safety Analysis (PDSA) is a priority for ORP. A proposal was developed to use the concept of a safety design strategy (SDS), as documented in DOE-STD-1189-2008, Integration of Safety into the Design Process, as a planning mechanism to support facility design and PDSA alignment. The standard provides the processes to develop an SDS that will ensure safety is integrated into design early in the project, by the start of preliminary design. Ultimately, as design progresses, an SDS is intended to support development of the project's PDSA. However, in this unique case, the HLW Facility design and construction phase has progressed beyond Critical Decision 3 and DOE-STD-1189-2008 was issued in 2008; 6 years after ORP approved the first WTP PDSA. In July 2013, ORP and the contractor recognized that the unresolved technical issues and design - safety basis misalignment should be addressed through a renewed look at nuclear safety requirements, and agreed that developing an SDS tailored to the criteria in DOE-STD-1189-2008 provided the best path forward to better integrate design and safety. Development of the SDS for the HLW Facility was one of many goals ORP established in a plan that describes how ORP will determine whether, and under what conditions, the contractor should be authorized to proceed with production engineering, procurement, and construction activities for the HLW Facility. Over the next several months, the contractor developed the draft SDS, identifying design basis accidents and control strategies for those accidents. ORP monitored progress and, when appropriate, provided recommendations. In April 2014, the contractor provided a draft SDS to ORP for initial review by an independent DOE Review Team. The Review Team was comprised of representatives from nuclear safety, criticality safety, engineering, fire protection, the Office of Environmental Management, the Assistant Manager WTP, and the DOE Chief of Nuclear Safety. A unique draft document review and interactive review process, facilitated through work sessions and continuous communication with the contractor, culminated in the development of 147 technical comments on topics varying from SDS implementation to hydrogen deflagration in vessels. Comment resolution sought to improve project clarity, delineation of control strategies, and, holistically, facilitate integration of safety into design in the SDS, as it will guide the restart of the HLW Facility production engineering and limited procurement and construction activities. All comments were resolved in support of a contractor submission of the final SDS to ORP at the end of June 2014. Successful resolution of these comments was achieved by continuing the real-time response and incorporation interaction with the contractor to ensure that mutual objectives were satisfied. The response times were facilitated through telephone, E-mail, and a shared file server accessible to contractor and DOE reviewers across the DOE complex. As a measure of success of this process, the Safety Basis Approval Authority (ORP Manager) and the WTP Federal Project Director approved the SDS on August 1, 2014, with no conditions of approval. DOE and the contractor recognized that it would be difficult to implement the SDS without changes to the existing contractor's engineering and nuclear safety processes. Accordingly, the contractor developed or revised a significant number of engineering and nuclear safety plans and procedures to implement the SDS into the design process. Over the coming year, the contractor will conduct a gap analysis between the SDS and the presently approved PDSA to incorporate the design basis accidents and preferred control strategies developed from the SDS into the PDSA. In addition, ORP will conduct an assessment of the contractor's implementation of the SDS into the design process at the appropriate stage of implementation, within 6 to 12 months of approval. Although the SDS was developed late in the HLW project timeline, the document will facilitate alignment of design and the safety basis, and is a key step in the return to full production engineering for the HLW Facility. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Geo-polymer solidification technology approved by Czech / Slovak nuclear authority to immobilise NPP resins and sludge waste - 15555

This paper presents the features and performance record of the geo-polymer solidification technology, SIAL{sup R}, licensed for use by both the Slovakian (UJD SR) and Czech Nuclear (SUJB) regulators. An overview of its performance at Bohunice in Slovakia, where it has been used to successfully treat resins and sludge wasteforms will be provided along with references to other plants where it has been used. More recently, geo-polymers have been noted as an immobilization technology which shows potential for resins produced by treatment of radioactive contaminated water resulting from the clean-up of the Fukushima Daiichi Plant. The Nuclear Power Plant A-1 located in Jaslovske Bohunice was completed in 1972 and operated for 5 years until two accidents in 1976 and 1977. After the second accident in February 1977 (INES level 4) the Nuclear Power Plant was permanently shut down for decommissioning. Fuel assemblies and fuel cladding damaged in the accidents led to significant Sr-90, Cs-137 and transuranic contamination. As a consequence of the long-term corrosion of the barrier's material, highly contaminated sludge accumulated which could not be effectively immobilized using conventional methods such as cementation or bitumen treatment due to adverse physical-chemical properties and high specific activity of the waste (Cs-137). This challenge led to AMEC developing and licensing the geo-polymer, SIAL{sup R}. Today, this geo-polymer is one of the most proven and widely used for on-site solidification of radioactive materials such as sludge, resins, sorbents and organic liquids. There are numerous benefits to using this geo-polymer for waste immobilisation. It can be used at room temperature and can incorporate up to approximately four times as much waste (sludge, resin) as a Portland cement matrix equivalent depending on the waste being treated. In addition, it is characterized by excellent mechanical and physical properties, compared with the earlier generation techniques. This includes higher mechanical strength, lower leachability, low volatility, posing a low fire risk and excellent physical stability in the presence of frost and water (no distortion or cracking). Dedicated facilities to receive and encapsulate waste from different locations can be created but this geo-polymer can also provide efficient and practical on-site treatment of radioactive waste streams. This is achievable because the equipment used to encapsulate waste using SIAL{sup R} is also modular, flexible and versatile. At Bohunice, the facility for encapsulation was designed to occupy existing areas of the plant in close proximity to the tanks where the waste was being stored. This allowed for the removal of the waste using Remote Operated Vehicles (ROVs) and for the waste to be immediately treated on site without the need for transportation saving both time and resource. To achieve this, some of the rooms and areas of the building were assessed and modified to ensure that the waste package flow was suitable whilst ensuring that appropriate safety measures were in place such as adequate shielding to reduce or entirely eliminate dose uptake of workers. To date, SIAL{sup R} has been used to successfully immobilize approximately 500 tons of waste which includes sludge and resin from Bohunice, Slovakia and approximately 250 m{sup 3} of spent ion exchange resins from tanks on site at the Dukovany nuclear plant, Czech Republic. It now has a track record of over 15 years which includes on-going research and development. The International missions WANO and OSART evaluated the SIAL{sup R} matrix technology at NPP Dukovany as an example of good practice. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Overview and status of domestic and international standards for nuclear criticality safety

For many years, the domestic and international consensus standards for nuclear criticality safety (NCS) have provided guidance for those performing hands-on operations involving fissionable materials. These consensus standards have been crucial to reducing the number of criticality accidents in process facilities. The last known criticality accident inside the United States was in 1978 (39 years ago at this writing) at the Idaho Chemical Processing Plant, and outside the United States, an accident occurred at Tokai-Mura, Japan, in 1999 (18 years ago at this writing). The domestic consensus standards for NCS include the American Nuclear Society (ANS) standards. The ANS Standards Board, the NCS Consensus Committee, and the ANS-8 Subcommittee oversee the development and maintenance of these standards. There are currently eighteen standards in revision (seven) or maintenance (eleven) cycles, and one standard is currently in development. The international consensus standards for NCS calculations, procedures, and practices are maintained and developed within the International Organization for Standardization, Technical Committee 85 on Nuclear Energy, Subcommittee 5 on Nuclear Fuel Technology, and Working Group 8, Nuclear Criticality Safety. Seven standards are currently available, one standard is in revision, and four standards are at various stages of development. This paper provides the NCS community with an overview and status report of domestic and international NCS consensus standards to stimulate interest and to support their continued development. (author)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

High-fidelity simulation-driven model development for coarse-grained computational fluid dynamics

Nuclear reactor safety analysis requires analysis of a broad range of accident scenarios and determining their consequences. For a nuclear power plant behavior, it is impossible to obtain experimental data at sufficiently large scales to support calibration and validation of various system models. In single-phase flow convective problems, high-resolution methods of Computational Fluid Dynamics (CFD) such as Direct Numerical Simulation (DNS) and Large Eddy Simulation (LES) can provide high fidelity results under conditions where physical measurements are unavailable. However, such high-resolution simulations are computationally expensive and not suitable for simulation of long transient scenarios in nuclear reactor accidents. In this work, we investigate the use of a high fidelity simulation-driven approach to model sub-grid scale (SGS) effect in Coarse Grained Computational Fluid Dynamics CG-CFD. Notably, fine-mesh simulations are used to construct physics-informed statistical surrogate of coarse-mesh SGS model. For an initial analysis, we consider a case of turbulent natural convection in a volumetrically heated fluid layer with a thermally insulated lower boundary and isothermal upper boundary. This scenario of unstable stratification is relevant to turbulent natural convection in a severe nuclear reactor accident, as well as in containment mixing and passive cooling. For this type of flow, the SGS effect is modeled by an added turbulent diffusivity in the energy equation. It is shown that a global correction for the energy equation is sufficient to achieve a significant improvement to the CG-CFD prediction of thermal mixing in the fluid layer. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Positron Annihilation Spectroscopy Investigation of Vacancy Clusters in Neutron-Irradiated 3C-SiC

Silicon carbide (SiC) has been widely applied or considered in nuclear systems as fuel and structural materials since 1960's, given its high-temperature stability, chemical inertness, and exceptional irradiation resistance. Chemically vapor deposited (CVD) SiC has been considered as the pressure vessel materials for the TRISO fuel particles used in high temperature gas-cooled reactors or novel accident tolerant fuel concepts for light water reactors. The use of SiC/SiC composites as primary structural materials has also been proposed in fusion reactors. Driven by the need to enlarge the safety margins of nuclear reactors in accident scenarios, R and D of accident-tolerant fuel has become an important topic in the nuclear engineering and materials community. A continuous fiber SiC/SiC composite is under consideration for Zr alloy cladding replacement. Microstructural development and mechanical property change in SiC subject to neutron and ion irradiation have been studied extensively and understood well. However, the information of small vacancy cluster (i.e., those invisible in TEM) evolution in SiC exposed to neutron irradiation is still lacking, and such small clusters is suspected to play an important role in swelling, radiation creep, and thermal conductivity degradation. In this study, positron annihilation spectroscopy is used to characterize the vacancy defects in 3C-SiC exposed to various neutron irradiation conditions to capture the dependence of temperature and irradiation dose. The obtained vacancy cluster distribution is then linked to the measured swelling behavior to provide insight into the relationship between microstructure and physical property of SiC. (authors)

36 MATERIALS SCIENCE↗

WIPP Operational and Safety Lessons Learned from the 2014 Fire and Radiological Events - 19389

The Waste Isolation Pilot Plant (WIPP) experienced two accident events in 2014 within 9 days of each other (salt haul truck fire and a radiological release). The repository was designed in the 1980's for high level waste and started operations in late 1990's for defense related transuranic (TRU) waste. Several long-standing technical issues from competing requirements between an underground facility (mine), nuclear safety, and environmental requirements lead to design, operations, and safety weaknesses that were not resolved prior to the two accident events. Other design issues and actions during early recovery efforts were identified as lessons learned for the Safety Significant Confinement Ventilation System (SSCVS) and Utility Shaft (US) capital asset projects and for future planning efforts. The infrastructure at WIPP was significantly degraded at the time of the events with key safety related items that had been out of service or not maintained for years. The emergency response to the two accident events was less than adequate and caused concerns with stakeholders. There are many operational and safety lessons learned from these two events and their corrective actions that will be valuable for all future planning of deep geological repositories (DGR). (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Chernobyl, the HBO miniseries: Fact and fiction

Two weeks ago, HBO began screening a five-part series on Monday nights on the Chernobyl nuclear power facility (NPF) accident, which occurred more than 30 years ago on April 26, 1986. The series focuses predominately on events leading to the accident, the scientific, social and political environments in the Soviet Union at that time and, to a lesser degree, on immediate and long-term medical consequences. The series is strong on the former, but weaker on the latter. Although the producer and writers have made considerable effort to present a factual account of the accident and its consequences, much of how the story unfolds is fictionalized.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Qualitative Evaluation of Human Reliability Analysis Quality

On August, 2001, the Korean government issued a severe accident policy statement. In this policy statement, a safety goal was proposed in a form of quantitative health objective(QHO) such that an additive risk of early fatality and cancer fatality caused by accident or operation of nuclear power plant(NPPs) should not exceed 0.1% of the sum of other accidents and cancer fatality risks resulting from all other causes, respectively. In accordance with the policy statement, probabilistic safety analysis(PSA) for all Korean NPPs was conducted to show each plant satisfies QHO. Given the increasing importance of PSA to assess the level of safety of NPPs, it is crucial that the quality of the PSA results should be assured. Compared to well-established PSA method used for domestic NPPs, there is consensus that human reliability analysis (HRA) has lack of consistency due to the different assumptions and different characteristics of the methods, which could possibly result in low quality of the PSA. To resolve the issues with lack of consistency of the HRA methods, there have been efforts to develop a standardized HRA method in Korea. However, quality of existing Korean HRA should be evaluated before developing a standardized method, since the results can be used for deriving requirements and give feedback and insights for developing the standardized method. In this study, literature review was performed to select an adequate method for evaluating the quality of the HRA, and the quality of the HRA is evaluated. Finally, results and insights of this study are shown in the conclusion. (authors)

61 RADIATION PROTECTION AND DOSIMETRY↗

Thermal Conductivity and Diffusivity for SiC Fibers for Use in ATF Cladding Composites

As part of the accident tolerant fuels (ATF) initiative, there is a need to understand the thermophysical properties of cladding for these fuels. One potential cladding material is silicon carbide (SiC) ceramic matrix composite reinforced with SiC fibers because of the corrosion resistance, resistance to hydrogen formation, high bulk thermal conductivity, and favorable mechanical properties of SiC. However, data about the thermal properties of individual SiC fibers in these composites is absent in the literature. This paper presents the measured axial thermal conductivity and thermal diffusivity of a leading SiC fiber (HiNicalon Type S) via a thermal measurement technique (transient electrothermal technique, TET) optimized for thin fibers. The results show that the measured properties are significantly lower than bulk values for SiC. Because of the low neutron absorption, as well as excellent thermal and mechanical properties, zircaloy has primarily been used for the fuel cladding in many nuclear reactors. A major drawback of the zircaloy is its hydrogen generation vulnerability. This issue has been known for some time, but the explosion of hydrogen accident in the Fukushima Daiichi nuclear disaster has motivated efforts for accident tolerant fuels (ATF) and their cladding as suitable substitutes for zircaloy. Fuel cladding made of silicon carbide (SiC) ceramic matrix composite (CMC) is an attractive alternative to the zircaloy. Investigation on the tubular monolithic a-SiC polytropes indicates that it has superior oxidation (hydrogen production) resistance (three orders of magnitude slower) than zircaloy. Additionally, it has well-documented, favorable mechanical properties, along with high temperature corrosion resistance. However, its bulk thermal properties can vary significantly depending on polytrope, the grain size, grain boundary, or impurities. At room temperature, SiC has a thermal conductivity as high as 490 Wm{sup -1}K{sup -1}, where the {sup 6}H polytrope has the highest conductivity. Thermal measurements of the SiC CMC are usually accomplished by laser flash method for thermal diffusivity (a) and thermal conductivity is indirectly calculated through the relationship k=aρcp. Depending on the manufacturing method and the reinforced fiber, the composite thermal conductivity varies from <10 Wm{sup -1}K{sup -1} to ∼70 Wm{sup -1}K{sup -1}. While the flash method is convenient for the measurement of the composite, it is difficult to apply to the measurement of individual fibers. Because of this, the thermal properties of individual SiC fibers is not present in the literature. Because the SiC fiber manufacturing process is different than that of the SiC matrix in the CMC, the properties of the bulk material might be erroneous when applied to the fiber. Being able to measure the fiber properties independently and directly allows for an understanding of the effect of the manufacturing process on the fiber and the opportunity to potentially improve or control the thermal properties of the composite. This improved accuracy can be achieved by measuring the fiber with a technique optimized for individual fiber measurement, known as the Transient Electrothermal Technique or TET. This paper presents the thermal conductivity and diffusivity of a leading SiC fiber (HiNicalon Type S). Measurements are performed with the TET, with the resulting properties being significantly lower than the bulk values of SiC, which is one possible explanation for relatively low CMC values. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Pruning of Discrete Dynamic Event Trees Using Density Peaks and Dynamic Time Warping

Discrete Dynamic Event Trees (DDETs) are used in probabilistic risk assessment (PRA) to determine the risk associated with complex systems, such as nuclear power plants, where accident scenarios need to be realistically modeled. One of the most challenging aspects of the DDET method is that a large number of branches are produced for each initiating event. This can result in data that is difficult to organize and time consuming to analyze. As the number of uncertain parameters increases, so does the complexity of the event tree. An event tree often has nodes that do not contribute to the overall results and predictive capabilities; therefore, we suggest a pre-pruning algorithm that can work to remove these nodes, and consequently, reduce the complexity of the tree. Sandia National Laboratories (SNL) is currently working on a two year dynamic cyber-risk informed project to assess cyber failure in a nuclear power plant. This will be achieved by coupling SNL's dynamic scheduler known as Analysis of Dynamic Accident Progression Trees (ADAPT) with MELCOR, a reactor accident simulator, and a System for Circuit Evaluation and Prediction of Transient Radiation Effects (SCEPTRE), a cyber Emulytics code. This paper will discuss the preliminary results of a feasibility study for using density peaks (DP) clustering with dynamic time warping (DTW) to prune branches that are formed from large DDETs, like the ones that will be produced throughout SNL's project. Papers from the project that are submitted to this conference discuss the following: - The MELCOR model for a Pressurized Water Reactor that uses a digital instrumentation and control system. - Proposed generic cyber exploits for the above reactor. - Modifications to ADAPT to extend the framework for multiple simulators, incorporate importance measures into DDET analysis, as well as sort and reduce DDETs based on inputs to or outputs from the tree. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Estimation Technique of Cs Retention Fraction in Irradiated Nuclear Fuel with Intact/Damaged Form

Even in the case of severe accident such as in TMI-2 or Chernobyl-4 or Fukushima Dai-ichi nuclear power station, waste partitioning in the decommission process or special nuclear material (SNM) accountancy in molten core material is important. Though Cs-137 concentration information is used for burnup estimation in conventional spent nuclear fuels, it could not be applied for damaged nuclear fuel of severe accidents because of both a large release fraction of Cs and significant change of its shape and form by core melting. The ratio of {sup 134}Cs/{sup 137}Cs has often been used as an index of the burnup in the cleanup of TMI-2 and the Chernobyl Drum Assay System in Chernobyl-4 and other cleanup activities, assuming that the Cs isotope ratio inside the fuel matrix would be the same as in the fuel debris, whereas its retention fraction would vary. Cs retention fraction information would be very important for the reliability of the burnup estimation as well as for the severe accident safety analysis. In the present research, a principle of new technique to estimate the Cs retention fraction is proposed and examined by sensitivity analysis of the FP inventory in conventional BWR irradiated fuel numerically, and validated by comparing the past experimental data based on gamma spectrometry. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Methodology of Experiment Design for Improving Transient Critical Heat Flux Model Development

One phenomenon that contributes to nuclear fuel and clad failure mechanisms is the departure from nucleate boiling (DNB). Accident scenarios such as reactivity-initiated accidents (RIAs) provide conditions where the frequency of boiling crisis is much more likely to occur and on much shorter time scales than loss of coolant (LOCA) or loss of flow (LOFA) accidents. Here, boiling crisis in the form of DNB is attributed to transient-induced heat flux values that exceed the critical heat flux (CHF). The resulting effects, such as bubble crowding and eventual dryout, can affect flow boiling heat transfer and compromise the structural integrity of nuclear reactor materials. The focus of the work proposed here lies in developing a rigorous process using out-of-pile testing, under simulated RIA conditions, to determine the transient critical heat flux of cladding materials, without contributions from aforementioned radiation-induced effects that have been observed during in-pile experiments. This study provides a road-map for developing and performing experiments that simulate the power profile and energy deposition aspects of transient events, specific to RIAs, on the laboratory scale. The goal of our project is to observe and measure DNB in an annular flow channel around a single heater rod that is operating and nominal thermal hydraulic conditions of a PWR. It is also an aim of these experiments to determine how to quantify the gap between SS and transient CHF cases, based on state-dependent properties of the cladding material type that is being interrogated. Traditionally, CHF is determined as a combination of four factors: hydraulic diameter, system pressure, mass flow, fluid quality. The authors propose that an additional measureable quantity, which is dependent on the structural properties of the cladding material itself, is partly reasonable for the difference between measured and model-developed CHF values. Using a carefully metered approach will allow for several key concepts to be realized: compensation for transient-based effects to current models for CHF; adaptation of current models for different cladding material types, including Gen-IV concept materials; and implementation of a correction factor to account for both power transient-based and radiation-induced effects on the CHF that have not yet been accounted for.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

The development of criticality response materials - 14282

The Sellafield nuclear facility in the UK comprises a highly complex suite of plants and processes. This in turn demands a consistent and high performance from Emergency Response teams and management in order to demonstrate readiness to respond and combat any nuclear emergency. In order to continue to improve such readiness, a comprehensive programme of development has been undertaken by the Licensee. The programme spans the totality of the emergency response cycle which is resolved into three broad areas: Preparedness; Response; Building Specific File. Within these broad categories the focus of the materials changes from broad and general materials in the preparedness section to actual scenario specific materials in the Building Specific Files Sellafield Ltd. provided the scope of work for the totality of the criticality response materials, known collectively as Criticality Accident Response Data (CARD). The UK National Nuclear Laboratory (NNL) was challenged to technically underpin, develop and present the information in a format and layout that would satisfy the requirements of consistency, brevity, simplicity and relevance. One of the key areas targeted for improvement, and the focus of this paper, was the criticality accident response information that sits within the Building Specific File. At this level of the emergency response cycle by necessity the information must be detailed and specific and enable the emergency responder to understand the problem and assist in formulating a recovery plan. One of the key challenges faced by NNL and discussed in this paper was how to provide the emergency responder with the greatest amount of relevant information in the simplest form. NNL solved this problem by presenting the information in a 'four-block' format which includes a common set of information in textual and diagrammatic form. This paper presents on overview of the criticality accident specific four-blocker, highlights the problems encountered and focuses on the new and innovative materials developed. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Identification of the threshold security applied for fuel under reactivity-initiated conditions by self-organizing maps and neural networks - 14386

In recent times, we have 439 reactors distributed in 31 countries that give about 377 GW, covering around 12% of world capacity of energy. Currently, it accounts for an estimated 40 serious accidents reported in nuclear power plants. In this article, turns out the behavior of fuel rod in light-water reactors under accident conditions. Besides, we investigate deeply about reactivity-initiated accidents, by introducing Nordheim-Fuchs model as state equations. The early research showed that pre-irradiated fuels and afterward subjected to a rapid pulse of energy. It adopts the key items necessary to check the threshold of failure. These items are few limits as burning the fuel; the value applied to the peak of energy, pulse width, oxidation layer, and cladding. The kinetic equations of nuclear reactors modeled as a non-linear system. In this way, it can apply the paradigm of artificial intelligence using the self-organized maps. Where the goal is to find the cluster of failure for irradiated fuels until 75 GWd/MTU. The second model based on statistical is the logistic regression theory. Hence, the tests carried out and compared against the results found by neural networks for classification of clusters. It proofs that both approaches present capacity to find the flaws accurately of about 80% of cases. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Circumvention of safety related equipment at nuclear fuel services, Inc. - 14570

On June 17, 2014, at Nuclear Fuel Services, Inc. (NFS), an employee was observed improperly operating two (2) spring return (i.e., spring closed) valves identified as Safety Related Equipment (SRE). These valves were also identified as Items Relied on for Safety (IROFS). The valves were important for both Nuclear Criticality Safety (NCS) and Chemical Safety purposes. The valves were observed to be 'propped' in the open position, thereby circumventing the intended safety function of the valves. The event was reported to the NRC Operations Center on June 18, 2014 (Event no. 50208); and, NFS' investigation concluded that the cause (of the event) was due to a willful act by a Nuclear Process Operator. In addition, when reviewing the event for NRC reportability, there was an organizational focus on NCS accident sequences with limited consideration of other aspects of the Integrated Safety Analysis (ISA). In other words, when determining reportability, the performance requirements for NCS accident sequences were reviewed and determined to be satisfied; however, the chemical safety accident sequences had not been considered during this review. The initial event and the reportability issues were entered into NFS' Corrective Action Program (CAP) and investigated. The investigation also included human performance and safety culture implications. This paper summarizes the circumstances surrounding the event and discusses the lessons learned as a result of the event investigation and review. (authors)

42 ENGINEERING↗

Initial exploration of a novel transient arrest system involving fuel heating

A preliminary analysis on a novel accident response system to diminish the severity of super- critical transients was conducted. The novel accident response system, called the instant shock arrest system, involves using electricity to heat the nuclear fuel at the onset of a large accidental reactivity insertion. This system is specifically designed for reactors with metallic fuel, such that the fuel is capable of conducting electricity, and being resistively heated. A reactor dynamics model of the advanced test reactor was created using the point kinetics equations and a linear reactivity feedback model to simulate how the system would effect the maximum fuel temperatures experienced during the transient. Transients with the instant shock arrest system were compared to those without it. It was found that the instant shock arrest system initially heated the fuel more than the unaffected transient but the negative reactivity inserted from such heating was enough to lower the maximum fuel temperature experienced during the transient. After simulating six different accident scenarios with reactivity insertions ranging from 0.5 to 1.3 dollar, it was found that an optimal system response could reduce peak fuel temperatures during the transient by 3.5% to 5%. Furthermore, discussion was given on how the optimal system response could be obtained using relatively simple numerical optimization algorithms due to the smoothness of the optimization problem. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

INITIAL EXPLORATION OF A NOVEL TRANSIENT ARREST SYSTEM INVOLVING FUEL HEATING (Presentation)

A preliminary analysis on a novel accident response system to diminish the severity of supercritical transients was conducted. The novel accident response system, called the instant shock arrest system, involves using electricity to heat the nuclear fuel at the onset of a large accidental reactivity insertion. This system is specifically designed for reactors with metallic fuel, such that the fuel is capable of conducting electricity, and being resistively heated. A reactor dynamics model of the advanced test reactor was created using the point kinetics equations and a linear reactivity feedback model to simulate how the system would effect the maximum fuel temperatures experienced during the transient. Transients with the instant shock arrest system were compare to those without it. It was found that the instant shock arrest system initially heated the fuel more than the unaffected transient but the negative reactivity inserted from such heating was enough to lower the maximum fuel temperature experienced during the transient. After simulating six different accident scenarios with reactivity insertions ranging from 0.5 \$ to 1.3 \$, it was found that the an optimal system response could reduce peak fuel temperatures during the transient by 3.5% to 5%. Furthermore, discussion was given on how the optimal system response could be obtained using relatively simple numerical optimization algorithms due to the smoothness of the optimization problem.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗