Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ARSENIC”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,711 records · Page 95

Correlation between Ga-O signature and midgap states at the Al{sub 2}O{sub 3}/In{sub 0.53}Ga{sub 0.47}As interface

Al{sub 2}O{sub 3}/In{sub 0.53}Ga{sub 0.47}As gate stacks were fabricated using different concentrations of NH{sub 4}OH as a pre-deposition treatment. Increased NH{sub 4}OH concentrations significantly reduced the C-V weak inversion hump and the measured near midgap interface states density (D{sub it}). X-ray photoelectron spectroscopy (XPS) studies revealed that these changes in the electrical properties were accompanied by a reduction in the amount of the Ga-O bonding while As-As dimers as well as other XPS detected InGaAs surface species did not correlate with the observed D{sub it} trend. Possible explanations for these findings are suggested.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Hard x-ray photoelectron spectroscopy study of As and Ga out-diffusion in In{sub 0.53}Ga{sub 0.47}As/Al{sub 2}O{sub 3} film systems

Hard x-ray photoelectron spectroscopy (HAXPES) was performed on In{sub 0.53}Ga{sub 0.47}As/Al{sub 2}O{sub 3} gate stacks as deposited and annealed at 400 Degree-Sign C, 500 Degree-Sign C, and 700 Degree-Sign C to test for out-diffusion of substrate elements. Ga and As core-level intensities increase with increasing anneal temperature, while the In intensity decreases. HAXPES was performed at two different beam energies to vary the surface sensitivity; results demonstrate Ga and As out-diffuse into the Al{sub 2}O{sub 3} film. Analysis suggests the presence of an interlayer containing Ga and As oxides, which thickens with increasing anneal temperature. Further diffusion, especially of Ga, into the Al{sub 2}O{sub 3} film is also observed with increasing anneal temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural, morphological, and magnetic characterization of In{sub 1-x}Mn{sub x}As quantum dots grown by molecular beam epitaxy

In this paper, we present a method to order low temperature (LT) self-assembled ferromagnetic In{sub 1-x}Mn{sub x}As quantum dots (QDs) grown by molecular beam epitaxy (MBE). The ordered In{sub 1-x}Mn{sub x}As QDs were grown on top of a non-magnetic In{sub 0.4}Ga{sub 0.6}As/GaAs(100) QDs multi-layered structure. The modulation of the chemical potential, due to the stacking, provides a nucleation center for the LT In{sub 1-x}Mn{sub x}As QDs. For particular conditions, such as surface morphology and growth conditions, the In{sub 1-x}Mn{sub x}As QDs align along lines like chains. This work also reports the characterization of QDs grown on plain GaAs(100) substrates, as well as of the ordered structures, as function of Mn content and growth temperature. The substitutional Mn incorporation in the InAs lattice and the conditions for obtaining coherent and incoherent structures are discussed from comparison between Raman spectroscopy and x-ray analysis. Ferromagnetic behavior was observed for all structures at 2 K. We found that the magnetic moment axis changes from [110] in In{sub 1-x}Mn{sub x}As over GaAs to [1-10] for the ordered In{sub 1-x}Mn{sub x}As grown over GaAs template.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Structural properties and band offset determination of p-channel mixed As/Sb type-II staggered gap tunnel field-effect transistor structure

The structural properties and band offset determination of p-channel staggered gap In{sub 0.7}Ga{sub 0.3}As/GaAs{sub 0.35}Sb{sub 0.65} heterostructure tunnel field-effect transistor (TFET) grown by molecular beam epitaxy (MBE) were investigated. High resolution x-ray diffraction revealed that the active layers are strained with respect to 'virtual substrate.' Dynamic secondary ion mass spectrometry confirmed an abrupt junction profile at the In{sub 0.7}Ga{sub 0.3}As/GaAs{sub 0.35}Sb{sub 0.65} heterointerface and minimal level of intermixing between As and Sb atoms. The valence band offset of 0.37 {+-} 0.05 eV was extracted from x-ray photoelectron spectroscopy. A staggered band lineup was confirmed at the heterointerface with an effective tunneling barrier height of 0.13 eV. Thus, MBE-grown staggered gap In{sub 0.7}Ga{sub 0.3}As/GaAs{sub 0.35}Sb{sub 0.65} TFET structures are a promising p-channel option to provide critical guidance for the future design of mixed As/Sb type-II based complementary logic and low power devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Growth and characterization of LuAs films and nanostructures

We report the growth and characterization of nearly lattice-matched LuAs/GaAs heterostructures. Electrical conductivity, optical transmission, and reflectivity measurements of epitaxial LuAs films indicate that LuAs is semimetallic, with a room-temperature resistivity of 90 {mu}{Omega} cm. Cross-sectional transmission electron microscopy confirms that LuAs nucleates as self-assembled nanoparticles, which can be overgrown with high-quality GaAs. The growth and material properties are very similar to those of the more established ErAs/GaAs system; however, we observe important differences in the magnitude and wavelength of the peak optical transparency, making LuAs superior for certain device applications, particularly for thick epitaxially embedded Ohmic contacts that are transparent in the near-IR telecommunications window around 1.3 {mu}m.

36 MATERIALS SCIENCE↗

Enhanced room temperature electronic and thermoelectric properties of the dilute bismuthide InGaBiAs

We report room temperature electronic and thermoelectric properties of Si-doped In{sub 0.52}Ga{sub 0.48}Bi{sub y}As{sub 1-y} with varying Bi concentrations. These films were grown epitaxially on a semi-insulating InP substrate by molecular beam epitaxy. We show that low Bi concentrations are optimal in improving the conductivity, Seebeck coefficient, and thermoelectric power factor, possibly due to the surfactant effects of bismuth. We observed a reduction in thermal conductivity with increasing Bi concentration, which is expected because of alloy scattering. We report a peak ZT of 0.23 at 300 K.

36 MATERIALS SCIENCE↗

Effective passivation of In{sub 0.2}Ga{sub 0.8}As by HfO{sub 2} surpassing Al{sub 2}O{sub 3} via in-situ atomic layer deposition

High {kappa} gate dielectrics of HfO{sub 2} and Al{sub 2}O{sub 3} were deposited on molecular beam epitaxy-grown In{sub 0.2}Ga{sub 0.8}As pristine surface using in-situ atomic-layer-deposition (ALD) without any surface treatment or passivation layer. The ALD-HfO{sub 2}/p-In{sub 0.2}Ga{sub 0.8}As interface showed notable reduction in the interfacial density of states (D{sub it}), deduced from quasi-static capacitance-voltage and conductance-voltage (G-V) at room temperature and 100 Degree-Sign C. More significantly, the midgap peak commonly observed in the D{sub it}(E) of ALD-oxides/In{sub 0.2}Ga{sub 0.8}As is now greatly diminished. The midgap D{sub it} value decreases from {>=}15 Multiplication-Sign 10{sup 12} eV{sup -1} cm{sup -2} for ALD-Al{sub 2}O{sub 3} to {approx}2-4 Multiplication-Sign 10{sup 12} eV{sup -1} cm{sup -2} for ALD-HfO{sub 2}. Further, thermal stability at 850 Degree-Sign C was achieved in the HfO{sub 2}/In{sub 0.2}Ga{sub 0.8}As, whereas C-V characteristics of Al{sub 2}O{sub 3}/p-In{sub 0.2}Ga{sub 0.8}As degraded after the high temperature annealing. From in-situ x-ray photoelectron spectra, the AsO{sub x}, which is not the oxidized state from the native oxide, but is an induced state from adsorption of trimethylaluminum and H{sub 2}O, was found at the ALD-Al{sub 2}O{sub 3}/In{sub 0.2}Ga{sub 0.8}As interface, while that was not detected at the ALD-HfO{sub 2}/In{sub 0.2}Ga{sub 0.8}As interface.

36 MATERIALS SCIENCE↗

Lifetime measurements of high-lying short lived states in {sup 69}As

Lifetimes of high-spin states in {sup 69}As have been measured using Doppler shift attenuation technique with the GASP and RFD setup. The determined transition probabilities indicate large deformation associated with some rotational bands in this nucleus.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

SiN{sub x}-induced intermixing in AlInGaAs/InP quantum well through interdiffusion of group III atoms

We analyze the composition profiles within intermixed and non-intermixed AlInGaAs-based multiple quantum wells structures by secondary ion mass spectrometry and observe that the band gap blue shift is mainly attributed to the interdiffusion of In and Ga atoms between the quantum wells and the barriers. Based on these results, several AlInGaAs-based single quantum well (SQW) structures with various compressive strain (CS) levels were grown and their photoluminescence spectra were investigated after the intermixing process involving the encapsulation of thin SiN{sub x} dielectric films on the surface followed by rapid thermal annealing. In addition to the annealing temperature, we report that the band gap shift can be also enhanced by increasing the CS level in the SQW. For instance, at an annealing temperature of 850 Degree-Sign C, the photoluminescence blue shift is found to reach more than 110 nm for the sample with 1.2%-CS SQW, but only 35 nm with 0.4%-CS SQW. We expect that this relatively larger atomic compositional gradient of In (and Ga) between the compressively strained quantum well and the barrier can facilitate the atomic interdiffusion and it thus leads to the larger band gap shift.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Investigation of plasma-doped fin structure and characterization of dopants by atom probe tomography

As and P dopants in a plasma-doped Si-based fin structure were analyzed using atom probe tomography. The distributions and concentrations of As and P atoms in various regions of the fin structure and the oxidation levels for different dopants were determined. Most dopants were segregated at the fin boundary, and the As and P concentrations exceeded 9 Multiplication-Sign 10{sup 20} atoms/cm{sup 3} and 2 Multiplication-Sign 10{sup 20} atoms/cm{sup 3}, respectively. The atomic oxygen and SiO{sub 2} concentrations depended on the dopant type. The larger and heavier As dopant severely damaged the surface of the fin structure and could cause more severe oxidation.

36 MATERIALS SCIENCE↗

Plasma process optimization for N-type doping applications

Plasma doping (PLAD) has been adopted across the implant technology space and into high volume production for both conventional DRAM and NAND doping applications. PLAD has established itself as an alternative to traditional ion implantation by beamline implantation. The push for high doping concentration, shallow doping depth, and conformal doping capability expand the need for a PLAD solution to meet such requirements. The unique doping profile and doping characteristics at high dose rates allow for PLAD to deliver a high throughput, differentiated solution to meet the demand of evolving transistor technology. In the PLAD process, ions are accelerated to the wafer as with a negative wafer bias applied to the wafer. Competing mechanisms, such as deposition, sputtering, and etching inherent in plasma doping require unique control and process optimization. In this work, we look at the distinctive process tool control and characterization features which enable an optimized doping process using n-type (PH{sub 3} or AsH{sub 3}) chemistries. The data in this paper will draw the relationship between process optimization through plasma chemistry study to the wafer level result.

36 MATERIALS SCIENCE↗

Plasma chemistry study of PLAD processes

Plasma doping (PLAD) shows very different impurity profiles compared to the conventional beam-line-based ion implantations due to its non-mass separation property and plasma environment. There is no simulation for PLAD process so far due to a lack of a dopant profile model. Several factors determine impurity profiles of PLAD process. The most significant factors are: plasma chemistry and deposition/etching characteristics of multi-ion species plasmas. In this paper, we present plasma chemistry and deposition/etching characteristics of PLAD processes versus co-gas dilutions. Four dopant plasmas including B{sub 2}H{sub 6}, BF{sub 3}, AsH{sub 3}, and PH{sub 3}, and two non-dopant plasmas including CH{sub 4} and GeH{sub 4} are studied and demonstrated.

36 MATERIALS SCIENCE↗

High electron mobility in Ga(In)NAs films grown by molecular beam epitaxy

We report the highest mobility values above 2000 cm{sup 2}/Vs in Si doped GaNAs film grown by molecular beam epitaxy. To understand the feature of the origin which limits the electron mobility in GaNAs, temperature dependences of mobility were measured for high mobility GaNAs and referential low mobility GaInNAs. Temperature dependent mobility for high mobility GaNAs is similar to the GaAs case, while that for low mobility GaInNAs shows large decrease in lower temperature region. The electron mobility of high quality GaNAs can be explained by intrinsic limiting factor of random alloy scattering and extrinsic factor of ionized impurity scattering.

36 MATERIALS SCIENCE↗

Electrically active Er doping in InAs, In{sub 0.53}Ga{sub 0.47}As, and GaAs

The electron concentration in dilute alloys of Er in GaAs, In{sub 0.53}Ga{sub 0.47}As, and InAs grown by molecular beam epitaxy is studied as a function of Er concentration and In content. Using first-principles calculations based on hybrid density functional theory, we attribute an observed increase in conduction electron concentration to Er incorporation on interstitial sites. Er also incorporates on substitutional sites where it is isovalent and electrically inactive. The formation energy of interstitial Er in InAs is significantly smaller than in GaAs, allowing for more electrically active Er in InAs. The results provide insight into characteristics of rare-earth elements as dopants in semiconductors.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Band offset determination of mixed As/Sb type-II staggered gap heterostructure for n-channel tunnel field effect transistor application

The experimental study of the valence band offset ({Delta}E{sub v}) of a mixed As/Sb type-II staggered gap GaAs{sub 0.35}Sb{sub 0.65}/In{sub 0.7}Ga{sub 0.3}As heterostructure used as source/channel junction of n-channel tunnel field effect transistor (TFET) grown by molecular beam epitaxy was investigated by x-ray photoelectron spectroscopy (XPS). Cross-sectional transmission electron micrograph shows high crystalline quality at the source/channel heterointerface. XPS results demonstrate a {Delta}E{sub v} of 0.39 {+-} 0.05 eV at the GaAs{sub 0.35}Sb{sub 0.65}/In{sub 0.7}Ga{sub 0.3}As heterointerface. The conduction band offset was calculated to be {approx}0.49 eV using the band gap values of source and channel materials and the measured valence band offset. An effective tunneling barrier height of 0.21 eV was extracted, suggesting a great promise for designing a metamorphic mixed As/Sb type-II staggered gap TFET device structure for low-power logic applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electron irradiation induced reduction of the permittivity in chalcogenide glass (As{sub 2}S{sub 3}) thin film

In this paper, we investigate the effect of electron beam irradiation on the dielectric properties of As{sub 2}S{sub 3} chalcogenide glass. By means of low-loss electron energy loss spectroscopy, we derive the permittivity function, its dispersive relation, and calculate the refractive index and absorption coefficients under the constant permeability approximation. The measured and calculated results show a heretofore unseen phenomenon: a reduction in the permittivity of {>=}40%. Consequently a reduction of the refractive index of 20%, hence, suggests a conspicuous change in the optical properties of the material under irradiation with a 300 keV electron beam. The plausible physical phenomena leading to these observations are discussed in terms of the homopolar and heteropolar bond dynamics under high energy absorption. The reported phenomena, exhibited by As{sub 2}S{sub 3}-thin film, can be crucial for the development of photonics integrated circuits using electron beam irradiation method.

36 MATERIALS SCIENCE↗

Effect of antimony nano-scale surface-structures on a GaSb/AlAsSb distributed Bragg reflector

Effects of antimony crystallization on the surface of GaSb during low temperature molecular beam epitaxy growth are investigated. The geometry of these structures is studied via transmission electron and atomic force microscopies, which show the surface metal forms triangular-shaped, elongated nano-wires with a structured orientation composed entirely of crystalline antimony. By depositing antimony on a GaSb/AlAsSb distributed Bragg reflector, the field is localized within the antimony layer. Polarization dependent transmission measurements are carried out on these nano-structures deposited on a GaSb/AlAsSb distributed Bragg reflector. It is shown that the antimony-based structures at the surface favor transmission of light polarized perpendicular to the wires.

36 MATERIALS SCIENCE↗

Defect study of molecular beam epitaxy grown undoped GaInNAsSb thin film using junction-capacitance spectroscopy

Defects in undoped GaInNAsSb thin film (i-GaInNAsSb) were investigated by junction-capacitance technique using admittance and transient photocapacitance (TPC) spectroscopy. An electron trap D2 was identified at 0.34 eV below the conduction band (E{sub C}) of i-GaInNAsSb using admittance spectroscopy. Optical transition of valance band (E{sub V}) electrons to a localized state OH1 (E{sub V} + 0.75 eV) was manifested in negative TPC signal. Combined activation energy of OH1 and D2 defect corresponds to the band-gap of i-GaInNAsSb, suggesting that OH1/D2 acts as an efficient recombination center. TPC signal at {approx}1.59 eV above E{sub V} was attributed to the nitrogen-induced localized state in GaInNAsSb.

36 MATERIALS SCIENCE↗