Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “variability study”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,693 records · Page 94

Observations of a hard X-ray component in the spectrum of Nova Ophiuchi

The spectrum and time variation of Nova Ophiuchi (H1705-25) in the 10-200 keV range as measured by the UCSD/MIT instruments aboard HEAO 1 during the period 1977 August 25 to September 28 are reported. The composite curve is best fitted by a kT = 2 keV thin thermal bremsstrahlung model below 10 keV and a separate hard X-ray component fitted equally well by a power-law component with photon index 2.19 + or - 0.06 or a kT = 32.1 + or - 2.4 keV thermal bremsstrahlung model. This is the first observation of a hard tail in the spectrum of a transient X-ray source with sufficient statistical significance to allow a detailed study of its spectral and temporal variability. It is found that the intensity variations of the high-energy X-rays are consistent with the variability at lower energies (3-6 keV), but no hard X-ray spectral index variability is found on time scales from 2 days to 2 weeks. The results can be interpreted as due to accretion onto a neutron star (or possibly onto a black hole) that may also be surrounded by an extended corona.

Wilson, C. K.↗

Multifrequency observations of the BL Lacertae object 0735+178

In each of the present four simultaneous spectra covering the radio-through-X-ray regimes, the IR-UV synchrotron continuum dominates the total observed power and presumably becomes opague between 10 to the 11th and 10 to the 13th Hz. Nonsimultaneous observations were also conducted, over a longer time period, in order to study long- and short-term variability at X-ray, optical, and radio frequencies. These data indicate that the rapid and dramatic variations evident at IR and optical wavelengths are absent at radio and X-ray frequencies, supporting a view of IR-UV flux emanation from a small region, while the X-rays are produced by the inverse Compton process in the radio-emitting region. Particles, photons and magnetic field may not be far from equipartition in this region. Theoretical suggestions are developed regarding the radial behavior of the electron density and magnetic field.

Bregman, J. N.↗

Notes on the system TV Geminorum

Low-resolution SWP spectra and high-resolution LWR spectra of the SRc variable star TV Gem have been studied. The available ultraviolet spectrophotometry and UBV photometry of the system can be interpreted in terms of the blended light from a B3.5 IV star and an M1 Iab star. The separation of the two stars is less than about 3 arc sec. Since the magnitude difference is a minimum in the B filter, being about 1.6 mag there, direct observation of TV Gem in a passband at 4400 A under conditions of good seeing might reveal the blue companion. No evidence was found for absorption lines of Mg II formed in the part of the wind of the M star which is projected against the disk of the B star.

Underhill, A. B.↗

A computer solution for the dynamic load, lubricant film thickness and surface temperatures in spiral bevel gears

A complete analysis of spiral bevel gear sets is presented. The gear profile is described by the movements of the cutting tools. The contact patterns of the rigid body gears are investigated. The tooth dynamic force is studied by combining the effects of variable teeth meshing stiffness, speed, damping, and bearing stiffness. The lubrication performance is also accomplished by including the effects of the lubricant viscosity, ambient temperature, and gear speed. A set of numerical results is also presented.

Chao, H. C.↗

Textural evolution of partially-molten planetary materials in microgravity

Recent Earth-based experiments examining the textural evolution of partially-molten rocks have revealed two important ways in which surface energy considerations affect magma. An initial experimental program addressing surface-energy effects on partially-molten materials in microgravity would involve simple, isothermal treatment of natural samples (meteorites, perioditic komatiite) at preselected temperatures in the melting range. Textural evolution would be assessed by time studies in which the only experiment variable would be run duration. Textural characterization of each sample would be done by quenching, recover, and sectioning for generally later, computer-aided interpretation of features.

Watson, E. B.↗

An artificial gravity research facility for life sciences

To obtain data for the design of a Mars mission vehicle configured for artificial gravity, NASA is currently studying the design of a variable-gravity research facility (VGRF) in a low earth orbit. The VGRF could be flown as a coorbiting payload requiring periodic servicing, resupply, and contingency intervention from the Space Station. The reasons why artificial gravity is needed for long-term missions are discussed; preliminary designs of a Mars vehicle with artificial gravity (at a weight cost of about 20 percent) are described; and particular attention is given to the VGRF design and mission profile.

Lemke, Larry G.↗

Comments on the observability of coronal variations

The appropriateness of the presently available X-ray and XUV multilayer emission lines for studies of solar outer atmosphere and corona is discussed. The spectral regions within which solar emission lines are formed are compared with the available multilayer passbands, with particular attention given to lines which are of interest for studying the various temperature regimes and variability time constants known to be present in the solar atmosphere. It is emphasized that, for many of the typical regions found in the outer solar atmosphere, the observable time scales for variability are determined by the ionization and recombination time scales of the plasma rather than by the inherent nature of the physical process causing the variability.

Golub, Leon↗

A comparison of single-cycle versus multiple-cycle proof testing strategies

An evaluation of single-cycle and multiple-cycle proof testing (MCPT) strategies for SSME components is described. Data for initial sizes and shapes of actual SSME hardware defects are analyzed statistically. Closed-form estimates of the J-integral for surface flaws are derived with a modified reference stress method. The results of load- and displacement-controlled stable crack growth tests on thin IN-718 plates with deep surface flaws are summarized. A J-resistance curve for the surface-cracked configuration is developed and compared with data from thick compact tension specimens. The potential for further crack growth during large unload/reload cycles is discussed, highlighting conflicting data in the literature. A simple model for ductile crack growth during MCPT based on the J-resistance curve is used to study the potential effects of key variables. The projected changes in the crack size distribution during MCPT depend on the interactions between several key parameters, including the number of proof cycles, the nature of the resistance curve, the initial crack size distribution, the component boundary conditions (load vs. displacement control), and the magnitude of the applied load or displacement. The relative advantages of single-cycle and multiple-cycle proof testing appear to be specific, therefore, to individual component geometry, material, and loading.

Hudak, S. J., Jr.↗

Biochemical correlates of neurosensory changes in weightlessness

The possible existence of a relationship between space motion sickness and chemical and biochemical variables measured in body fluids is studied. Clinical chemistry and endocrine measurements from blood and urine samples taken before and after Space Shuttle flights were analyzed along with the occurrence of SMS during flight and provocative testing before flight. Significant positive correlations were observed with serum chloride and significant negative correlations with serum phosphate, serum uric acid, and plasma thyroid stimulating hormone.

Leach, Carolyn S.↗

Effects Of Heat Sinks On VPPA Welds

Report describes theoretical and experimental study of absorption of heat by metal blocks in contact with metal plate while plate subjected to variable-polarity plasma-arc (VPPA) welding. Purpose of study to contribute to development of comprehensive mathematical model of temperature in weld region. Also relevant to welding of thin sheets of metal to thick blocks of metal, heat treatment of metals, and hotspots in engines.

Nunes, Arthur C.↗

Design optimization for cost and quality: The robust design approach

Designing reliable, low cost, and operable space systems has become the key to future space operations. Designing high quality space systems at low cost is an economic and technological challenge to the designer. A systematic and efficient way to meet this challenge is a new method of design optimization for performance, quality, and cost, called Robust Design. Robust Design is an approach for design optimization. It consists of: making system performance insensitive to material and subsystem variation, thus allowing the use of less costly materials and components; making designs less sensitive to the variations in the operating environment, thus improving reliability and reducing operating costs; and using a new structured development process so that engineering time is used most productively. The objective in Robust Design is to select the best combination of controllable design parameters so that the system is most robust to uncontrollable noise factors. The robust design methodology uses a mathematical tool called an orthogonal array, from design of experiments theory, to study a large number of decision variables with a significantly small number of experiments. Robust design also uses a statistical measure of performance, called a signal-to-noise ratio, from electrical control theory, to evaluate the level of performance and the effect of noise factors. The purpose is to investigate the Robust Design methodology for improving quality and cost, demonstrate its application by the use of an example, and suggest its use as an integral part of space system design process.

Unal, Resit↗

Recent trends in stratospheric total ozone - Implications of dynamical and El Chichon perturbations

The recently reprocessed Nimbus-7 TOMS total ozone data from 1979 to 1989 are analyzed to assess the global impact of the El Chichon volcanic eruption on stratospheric total ozone. An apparent decrease in total ozone of 5 to 6 percent is present during the winter of 1982-1983 following the eruption of El Chichon. A regression analysis of total ozone with the equatorial zonal wind at 30 mb indicates that response to the quasi-biennial oscillation can explain much of the observed ozone anomaly, and that the total ozone decrease which can be attributed to El Chichon is at most 2 to 4 percent. This study also suggests that the interannual variability caused by the quasi-biennial oscillation and planetary wave activity may introduce apparent seasonal trends in total ozone and temperature in the lower stratosphere, particularly if the length of the data record is not very long. Such trends may affect the assessment of total ozone changes caused by chemical perturbations.

Chandra, S.↗

Sea level response to wind forcing in the tropical Atlantic

The circulation of the warm-water layer of the tropical Atlantic varies seasonally. This predominant signal is imposed by the annual migration of the Intertropical Covergence Zone separating two trade-wind regimes. As the migration varies interannually, so does the ocean circulation. A long-time objective of climate studies is to understand this interannual variability: to define its range, to fully explain the causal relationship between wind and ocean response, and eventually to understand how the resulting changes in sea surface temperature affect the wind field itself. Our initial objective is to observe and model the oceanic response.

Katz, Eli Joel↗

Spectral characteristics of time-dependent orbit errors in altimeter height measurements

A mean reference surface and time-dependent orbit errors are estimated simultaneously for each exact-repeat ground track from the first two years of Geosat sea level estimates based on the Goddard Earth model (GEM)-T2 orbits. Motivated by orbit theory and empirical analysis of Geosat data, the time-dependent orbit errors are modeled as 1 cycle per revolution (cpr) sinusoids with slowly varying amplitude and phase. The method recovers the known 'bow tie effect' introduced by the existence of force model errors within the precision orbit determination (POD) procedure used to generate the GEM-T2 orbits. The bow tie pattern of 1-cpr orbit errors is characterized by small amplitudes near the middle and larger amplitudes (up to 160 cm in the 2 yr of data considered here) near the ends of each 5- to 6-day orbit arc over which the POD force model is integrated. A detailed examination of these bow tie patterns reveals the existence of daily modulations of the amplitudes of the 1-cpr sinusoid orbit errors with typical and maximum peak-to-peak ranges of about 14 cm and 30 cm, respectively. The method also identifies a daily variation in the mean orbit error with typical and maximum peak-to-peak ranges of about 6 and 30 cm, respectively, that is unrelated to the predominant 1-cpr orbit error. Application of the simultaneous solution method to the much less accurate Geosat height estimates based on the Naval Astronautics Group orbits concludes that the accuracy of POD is not important for collinear altimetric studies of time-dependent mesoscale variability (wavelengths shorter than 1000 km), as long as the time-dependent orbit errors are dominated by 1-cpr variability and a long-arc (several orbital periods) orbit error estimation scheme such as that presented here is used.

Chelton, Dudley B.↗

Modeling crop responses to environmental change

Potential biophysical responses of crops to climate change are studied focusing on the primary environmental variables which define the limits to agricultural crop growth and production, and the principal methods for predicting climate change impacts on crop geography and production. It is concluded that the principal uncertainties in the prediction of the impacts of climate change on agriculture reside in the contribution of the direct effects of increasing CO2, in potential changes inclimate variability, and the effects of adjustments mechanisms in the context of climatic changes.

Rosenzweig, Cynthia↗

Space simulation techniques and facilities for SAX STM test campaign

SAX is a satellite for X-Ray astronomy. It is a major element of the overall basic Science Program of the Italian Space Agency (ASI) and is being developed with the contribution of the Netherlands Agency for Aerospace Programs (NIVR). The scientific objectives of SAX are to carry out systematic and comprehensive observations of celestial X-Ray sources over the 0.1 - 300 KeV energy range with special emphasis on spectral and timing measurements. The satellite will also monitor the X-Ray sky to investigate long-term source variability and to permit localization and study of X-Ray transients. Alenia Spazio is developing the satellite that is intended for launch in the second half of 1995 in a low, near-equatorial Earth orbit. At system level a Structural Thermal Model (STM) has been conceived to verify the environmental requirements by validating the mechanical and thermal analytical models and qualifying satellite structure and thermal control. In particular, the following tests have been carried out in Alenia Spazio, CEA/CESTA and ESTEC facilities: Modal Survey, Centrifuge, Acoustic, Sinusoidal/Random Vibration and Thermal Balance. The paper, after a short introduction of the SAX satellite, summarizes the environmental qualification program performed on the SAX STM. It presents test objectives, methodologies and relevant test configurations. Peculiar aspects of the test campaign are highlighted. Problems encountered and solutions adopted in performing the tests are described as well. Furthermore, test results are presented and assessed.

Giordano, Pietro↗

Technical report series on global modeling and data assimilation. Volume 6: A multiyear assimilation with the GEOS-1 system: Overview and results

The Data Assimilation Office (DAO) at Goddard Space Flight Center has produced a multiyear global assimilated data set with version 1 of the Goddard Earth Observing System Data Assimilation System (GEOS-1 DAS). One of the main goals of this project, in addition to benchmarking the GEOS-1 system, was to produce a research quality data set suitable for the study of short-term climate variability. The output, which is global and gridded, includes all prognostic fields and a large number of diagnostic quantities such as precipitation, latent heating, and surface fluxes. Output is provided four times daily with selected quantities available eight times per day. Information about the observations input to the GEOS-1 DAS is provided in terms of maps of spatial coverage, bar graphs of data counts, and tables of all time periods with significant data gaps. The purpose of this document is to serve as a users' guide to NASA's first multiyear assimilated data set and to provide an early look at the quality of the output. Documentation is provided on all the data archives, including sample read programs and methods of data access. Extensive comparisons are made with the corresponding operational European Center for Medium-Range Weather Forecasts analyses, as well as various in situ and satellite observations. This document is also intended to alert users of the data about potential limitations of assimilated data, in general, and the GEOS-1 data, in particular. Results are presented for the period March 1985-February 1990.

Suarez, Max J.↗

Nonlinear dynamics of global atmospheric and earth system processes

During the grant period, the authors continued ongoing studies aimed at enhancing their understanding of the operation of the atmosphere as a complex nonlinear system interacting with the hydrosphere, biosphere, and cryosphere in response to external radiative forcing. Five papers were completed with support from the grant, representing contributions in three main areas of study: (1) theoretical studies of the interactive atmospheric response to changed biospheric boundary conditions measurable from satellites; (2) statistical-observational studies of global-scale temperature variability on interannual to century time scales; and (3) dynamics of long-term earth system changes associated with ice sheet surges.

Zhang, Taiping↗