Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “time distribution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,693 records · Page 94

Attenuation characteristics of nonlinear pressure waves propagating in pipes

A series of experiments was conducted to investigate temporal and spatial velocity distributions of fluid flow in 3-in. open-end pipes of various lengths up to 210 ft, produced by the propagation of nonlinear pressure waves of various intensities. Velocity profiles across each of five sections along the pipes were measured as a function of time with the use of hot-film and hot-wire anemometers for two pressure waves produced by a piston. Peculiar configurations of the velocity profiles across the pipe section were noted, which are uncommon for steady pipe flow. Theoretical consideration was given to this phenomenon of higher velocity near the pipe wall for qualitative confirmation. Experimentally time-dependent velocity distributions along the pipe axis were compared with one-dimensional theoretical results obtained by the method of characteristics with or without diffusion term for the purpose of determining the attenuation characteristics of the nonlinear wave propagation in the pipes.

Shih, C. C.↗

A comparison of two plasma models

The time dependent behavior of a plasma which surrounds a highly biased conducting sphere is considered. This plasma is treated as either a cold two component fluid or as a warm plasma whose time development can be found by solving the Vlasov equation. Both models demonstrate oscillatory behavior, but the electric fields predicted by the models are quantitatively quite different in regions close to the surface of the sphere and very similar otherwise. A broadening of the electron distribution function with time is observed indicating local heating of the plasma near the surface of the sphere.

Cottam, Russell↗

Upscaling solute transport in naturally fractured porous media with the continuous time random walk method

Solute transport in fractured porous media is typically 'non-Fickian'; that is, it is characterized by early breakthrough and long tailing and by nonlinear growth of the Green function-centered second moment. This behavior is due to the effects of (1) multirate diffusion occurring between the highly permeable fracture network and the low-permeability rock matrix, (2) a wide range of advection rates in the fractures and, possibly, the matrix as well, and (3) a range of path lengths. As a consequence, prediction of solute transport processes at the macroscale represents a formidable challenge. Classical dual-porosity (or mobile-immobile) approaches in conjunction with an advection-dispersion equation and macroscopic dispersivity commonly fail to predict breakthrough of fractured porous media accurately. It was recently demonstrated that the continuous time random walk (CTRW) method can be used as a generalized upscaling approach. Here we extend this work and use results from high-resolution finite element-finite volume-based simulations of solute transport in an outcrop analogue of a naturally fractured reservoir to calibrate the CTRW method by extracting a distribution of retention times. This procedure allows us to predict breakthrough at other model locations accurately and to gain significant insight into the nature of the fracture-matrix interaction in naturally fractured porous reservoirs with geologically realistic fracture geometries.

54 ENVIRONMENTAL SCIENCES↗

SU-F-T-336: A Quick Auto-Planning (QAP) Method for Patient Intensity Modulated Radiotherapy (IMRT)

Purpose: The aim of this study is to develop a quick auto-planning system that permits fast patient IMRT planning with conformal dose to the target without manual field alignment and time-consuming dose distribution optimization. Methods: The planning target volume (PTV) of the source and the target patient were projected to the iso-center plane in certain beameye- view directions to derive the 2D projected shapes. Assuming the target interior was isotropic for each beam direction boundary analysis under polar coordinate was performed to map the source shape boundary to the target shape boundary to derive the source-to-target shape mapping function. The derived shape mapping function was used to morph the source beam aperture to the target beam aperture over all segments in each beam direction. The target beam weights were re-calculated to deliver the same dose to the reference point (iso-center) as the source beam did in the source plan. The approach was tested on two rectum patients (one source patient and one target patient). Results: The IMRT planning time by QAP was 5 seconds on a laptop computer. The dose volume histograms and the dose distribution showed the target patient had the similar PTV dose coverage and OAR dose sparing with the source patient. Conclusion: The QAP system can instantly and automatically finish the IMRT planning without dose optimization.

60 APPLIED LIFE SCIENCES↗

Exploratory Visual Analysis of Anomalous Runtime Behavior in Streaming High Performance Computing Applications

Online analysis of runtime behavior is essential for performance tuning in streaming scientific workflows. Integration of anomaly detection and visualization is necessary to support human-centered analysis, such as verification of candidate anomalies utilizing domain knowledge. In this work, we propose an efficient and scalable visual analytics system for online performance analysis of scientific workflows toward the exascale scenario. Here, our approach uses a call stack tree representation to encode the structural and temporal information of the function executions. Based on the call stack tree features (e.g., execution time of the root function or vector representation of the tree structure), we employ online anomaly detection approaches to identify candidate anomalous function executions. We also present a set of visualization tools for verification and exploration in a level-of-detailed manner. General information, such as distribution of execution times, are provided in an overview visualization. The detailed structure (e.g., function invocation relations) and the temporal information (e.g., message communication) of the execution call stack of interest are also visualized. The usability and efficiency of our methods are verified in a real-world HPC application.

97 MATHEMATICS AND COMPUTING↗

SU-E-I-22: Dependence On Calibration Phantom and Field Area of the Conversion Factor Used to Calculate Skin Dose During Neuro-Interventional Fluoroscopic Procedures

Purpose: To determine the appropriate calibration factor to use when calculating skin dose with our real-time dose-tracking system (DTS) during neuro-interventional fluoroscopic procedures by evaluating the difference in backscatter from different phantoms and as a function of entrance-skin field area. Methods: We developed a dose-tracking system to calculate and graphically display the cumulative skin-dose distribution in real time. To calibrate the DTS for neuro-interventional procedures, a phantom is needed that closely approximates the scattering properties of the head. We compared the x-ray backscatter from eight phantoms: 20-cm-thick solid water, 16-cm diameter water-filled container, 16-cm CTDI phantom, modified-ANSI head phantom, 20-cm-thick PMMA, Kyoto-Kagaku PBU- 50 head, Phantom-Labs SK-150 head, and RSD RS-240T head. The phantoms were placed on the patient table with the entrance surface at 15 cm tube-side from the isocenter of a Toshiba Infinix C-arm, and the entrance-skin exposure was measured with a calibrated 6-cc PTW ionization chamber. The measurement included primary radiation, backscatter from the phantom and forward scatter from the table and pad. The variation in entrance-skin exposure was also measured as a function of the skin-entrance area for a 30x30 cm by 20-cm-thick PMMA phantom and the SK-150 head phantom using four different added beam filters. Results: The entranceskin exposure values measured for eight different phantoms differed by up to 12%, while the ratio of entrance exposure of all phantoms relative to solid water showed less than 3% variation with kVp. The change in entrance-skin exposure with entrance-skin area was found to differ for the SK-150 head compared to the 20-cm PMMA phantom and the variation with field area was dependent on the added beam filtration. Conclusion: To accurately calculate skin dose for neuro-interventional procedures with the DTS, the phantom for calibration should be carefully chosen since different phantoms can contribute different backscatter for identical exposure parameters. Research supported in part by Toshiba Medical Systems and NIH Grants R43FD0158401, R44FD0158402 and R01EB002873.

61 RADIATION PROTECTION AND DOSIMETRY↗

Femtosecond ultraviolet laser ablation of silver and comparison with nanosecond ablation

The ablation plume dynamics arising from ablation of silver with a 500 fs, 248 nm laser at {approx}2 J cm{sup -2} has been studied using angle-resolved Langmuir ion probe and thin film deposition techniques. For the same laser fluence, the time-of-flight ion signals from femtosecond and nanosecond laser ablation are similar; both show a singly peaked time-of-flight distribution. The angular distribution of ion emission and the deposition are well described by the adiabatic and isentropic model of plume expansion, though distributions for femtosecond ablation are significantly narrower. In this laser fluence regime, the energy efficiency of mass ablation is higher for femtosecond pulses than for nanosecond pulses, but the ion production efficiency is lower.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

THE AFTERGLOWS OF SWIFT-ERA GAMMA-RAY BURSTS. I. COMPARING PRE-SWIFT AND SWIFT-ERA LONG/SOFT (TYPE II) GRB OPTICAL AFTERGLOWS

We have gathered optical photometry data from the literature on a large sample of Swift-era gamma-ray burst (GRB) afterglows including GRBs up to 2009 September, for a total of 76 GRBs, and present an additional three pre-Swift GRBs not included in an earlier sample. Furthermore, we publish 840 additional new photometry data points on a total of 42 GRB afterglows, including large data sets for GRBs 050319, 050408, 050802, 050820A, 050922C, 060418, 080413A, and 080810. We analyzed the light curves of all GRBs in the sample and derived spectral energy distributions for the sample with the best data quality, allowing us to estimate the host-galaxy extinction. We transformed the afterglow light curves into an extinction-corrected z = 1 system and compared their luminosities with a sample of pre-Swift afterglows. The results of a former study, which showed that GRB afterglows clustered and exhibited a bimodal distribution in luminosity space, are weakened by the larger sample. We found that the luminosity distribution of the two afterglow samples (Swift-era and pre-Swift) is very similar, and that a subsample for which we were not able to estimate the extinction, which is fainter than the main sample, can be explained by assuming a moderate amount of line-of-sight host extinction. We derived bolometric isotropic energies for all GRBs in our sample, and found only a tentative correlation between the prompt energy release and the optical afterglow luminosity at 1 day after the GRB in the z = 1 system. A comparative study of the optical luminosities of GRB afterglows with echelle spectra (which show a high number of foreground absorbing systems) and those without, reveals no indication that the former are statistically significantly more luminous. Furthermore, we propose the existence of an upper ceiling on afterglow luminosities and study the luminosity distribution at early times, which was not accessible before the advent of the Swift satellite. Most GRBs feature afterglows that are dominated by the forward shock from early times on. Finally, we present the first indications of a class of long GRBs, which form a bridge between the typical high-luminosity, high-redshift events and nearby low-luminosity events (which are also associated with spectroscopic supernovae) in terms of energetics and observed redshift distribution, indicating a continuous distribution overall.

79 ASTRONOMY AND ASTROPHYSICS↗

Energetic protons in the Jovian magnetosphere

Time histories, angular distributions and energy spectra of energetic protons were observed over an energy range of 0.2 to 20 MeV for the four passes of Pioneers 10 and 11 through the Jovian magnetosphere. The energetic particle data from these four passes are remarkably different. Azimuthal anisotropies appear to dominate with time variations also contributing to the very complex topology. On the inbound P-10 pass the expected corotation anisotropy was not observed in the outer magnetosphere. The simplest explanation is that the particle reference frame (the magnetospheric plasma) is moving nearly radially, suggesting the existence of a planetary wind at that time.

Mcdonald, F. B.↗

Application of ex-vessel neutron dosimetry combined with in-core measurements for correction of neutron source used for RPV fluence calculations

This paper deals with calculated and semi-analytical evaluations of VVER-1000 reactor core neutron source distributions and their influence on measurements and calculations of the integral through-vessel neutron leakage. Neutron activation measurements analyzed in the paper were carried out in an ex-vessel air cavity at different nuclear power plant units with VVER-1000 during different fuel cycles. The time-integrated neutron source distributions used for DORT calculations were prepared via two different approaches based on (a) calculated fuel burnup (standard routine procedure) and (b) in-core measurements by means of self-powered detectors (SPDs) and thermocouples (TCs) (new approach). Considering that fuel burnup distributions in operating VVER may be evaluated now by the use of analytical methods (calculations) only, it is necessary to develop new approaches for the testing and correction of calculated evaluations of a neutron source. The results presented in this paper allow one to consider the reverse task of the alternative estimation of fuel burnup distributions. The proposed approach is based on the adjustment (fitting) of time-integrated neutron source distributions, and thus fuel burnup patterns, in some part of the reactor core, taking into account neutron leakage measurements, neutron-physical calculations, and in-core SPD and TC measurement data. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

The effects of varying cosmological parameters on halo substructure

We investigate how different cosmological parameters, such as those delivered by the WMAP and Planck missions, affect the nature and evolution of the dark matter halo substructure. We use a series of flat Λ cold dark matter cosmological N-body simulations of structure formation, each with a different power spectrum but with the same initial white noise field. Our fiducial simulation is based on parameters from the WMAP seventh year cosmology. We then systematically vary the spectral index, n{sub s} ; matter density, Ω {sub M}; and normalization of the power spectrum, σ{sub 8}, for seven unique simulations. Across these, we study variations in the subhalo mass function, mass fraction, maximum circular velocity function, spatial distribution, concentration, formation times, accretion times, and peak mass. We eliminate dependence of subhalo properties on host halo mass and average the values over many hosts to reduce variance. While the 'same' subhalos from identical initial overdensity peaks in higher σ{sub 8}, n{sub s} , and Ω {sub m} simulations accrete earlier and end up less massive and closer to the halo center at z = 0, the process of continuous subhalo accretion and destruction leads to a steady state distribution of these properties across all subhalos in a given host. This steady state mechanism eliminates cosmological dependence on all of the properties listed above except for subhalo concentration and V {sub max}, which remain greater for higher σ{sub 8}, n{sub s} , and Ω {sub m} simulations, and subhalo formation time, which remains earlier. We also find that the numerical technique for computing the scale radius and the halo finder that were used can significantly affect the concentration-mass relationship as computed for a simulation.

79 ASTRONOMY AND ASTROPHYSICS↗

Bayesian Structural Time Series for Behind-the-Meter Photovoltaic Disaggregation: Preprint

Distributed photovoltaic (PV) generation often occurs ``behind the meter": a grid operator can only observe the net load, which is the sum of the gross load and distributed PV generation. This lack of observability poses a challenge to system operation at both bulk level and distribution level. The lack of real-time or near-future disaggregated estimates of gross load and PV generation will lead to over scheduling of energy production and regulation reserves, reliability constraints violations, wear and tear of controller devices, and potentially cascading failures of a system. In this paper we propose the use of a Bayesian Structural Time Series (BSTS) model with local solar irradiance measurements to disaggregate the summed PV generation and gross load signals at a downstream measurement site. BSTSs are a highly expressive model class that blends classic time series models with the powerful Bayesian state space estimation framework. Disaggregation is done probabilistically, which automatically quantifies the uncertainties of the estimated PV generation and gross load consumption. Depending on the data availability in real-time, it can be used to disaggragate PV and gross load at customer site, or can be used at the feeder level. In this paper, we focus on solving the problem at feeder level. We compare the performance of a BSTS model as well as a handful of state-of-the-art methods on a Pecan Street AMI dataset, using the National Solar Radiation Database (NSRDB) to estimate local irradiance.

Bayesian structural time series↗

Evaporation and Molecular Beam Scattering from a Flat Liquid Jet

An experimental setup for molecular beam scattering from flat liquid sheets has been developed, with the goal of studying reactions at gas–liquid interfaces for volatile liquids. Specifically, a crossed molecular beam instrument that can measure angular and translational energy distributions of scattered products has been adapted for liquid jet scattering. A microfluidic chip is used to create a stable flat liquid sheet inside vacuum from which scattering occurs, and both evaporation and scattering from this sheet are characterized using a rotatable mass spectrometer that can measure product time-of-flight distributions. This article describes the instrument and reports on the first measurements of evaporation of dodecane and Ne from a Ne-doped dodecane flat jet, as well as scattering of Ne from a flat jet of pure dodecane.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Implementation and validation of a wake model for low-speed forward flight

The computer implementation and calculations of the induced velocities produced by a wake model consisting of a trailing vortex system defined from a prescribed time averaged downwash distribution are detailed. Induced velocities are computed by approximating each spiral turn by a pair of large straight vortex segments positioned at critical points relative to where the induced velocity is required. A remainder term for the rest of the spiral is added. This approach results in decreased computation time compared to classical models where each spiral turn is broken down in small straight vortex segments. The model includes features such a harmonic variation of circulation, downwash outside of the blade and/or outside the tip path plane, blade bound vorticity induced velocity with harmonic variation of circulation and time averaging. The influence of various options and parameters on the results are investigated and results are compared to experimental field measurements with which, a resonable agreement is obtained. The capabilities of the model as well as its extension possibilities are studied. The performance of the model in predicting the recently-acquired NASA Langley Inflow data base for a four-bladed rotor is compared to that of the Scully Free Wake code, a well-established program which requires much greater computational resources. It is found that the two codes predict the experimental data with essentially the same accuracy, and show the same trends.

Komerath, Narayanan M.↗

Managing and Servicing Physical Oceanographic Data at a NASA Distributed Active Archive Center

The NASA Earth Science Data Information Systems Project funds and operates 12 Distributed Active Archive Center(s) (DAAC) throughout the United States. Of these 12 centers, the Physical Oceanography DAAC (PO.DAAC) is committed to providing long term archival, distribution and stewardship for NASA physical oceanographic data, primarily derived from space-born satellite systems, but also including a growing set of recent and future in situ observations from the SPURS-1 and SPURS-2 campaigns. Notable NASA missions supported include: Seasat, TOPEX/Poseidon, NSCAT, QuikSCAT, ISS-RapidScat, Jason-1, Jason-2/OSTM, GRACE, Aquarius, GHRSST, and MODIS. The following interagency and international missions are also supported by PO.DAAC: AVHRR, Coriolis, DMSP, MetOp-A, MetOp-B, Oceansat-2. The PO.DAAC currently holds 525 datasets in public distribution, spanning the following observational parameters: sea surface temperature, sea surface salinity, ocean color, ocean surface currents, ocean surface wind speed, ocean surface wind direction, sea surface height, significant wave height, ocean water mass/thickness, and sea ice age. A hundred of these datasets are available in near-real-time. Datasets are distributed through a variety of open-source access protocols including FTP, OPeNDAP, and THREDDS. FTP will soon be phased out in favor of a recently introduced HTTPS PO.DAAC Drive interface that supports WebDAV and interoperable machine-to-machine communication. OPeNDAP supports remote data/metadata query, subset, and download. THREDDS provides the features of OPeNDAP with the additional feature of temporal aggregation. PO.DAAC also offers proprietary tools and services to further enhance the data discovery, visualization and analysis experience, including but not limited to: State of the Ocean, Web Services (data/metadata discovery and extraction), HiTIDE Level-2 subsetter, Live Access Server (LAS), Webification (w10nsci), and Rich Site Summary (RSS) Datacasting. To assist with provenance of datasets, PO.DAAC has implemented DOIs for the data it distributes so that they can be properly cited. There is a user forum and helpdesk that contains data recipes and via which users can get guidance. In summary, this presentation aims to provide a general overview of PO.DAAC’s web portal and data holdings along with a set of illustrative examples leading prospective data users into the practical utility of its tools and services.

Moroni, David F.↗

CRISPR-Cas systems in the marine actinomycete Salinispora: linkages with phage defense, microdiversity and biogeography

Background: Prokaryotic CRISPR-Cas systems confer resistance to viral infection and thus mediate bacteria-phage interactions. However, the distribution and functional diversity of CRISPRs among environmental bacteria remains largely unknown. Here, comparative genomics of 75 Salinispora strains provided insight into the diversity and distribution of CRISPR-Cas systems in a cosmopolitan marine actinomycete genus. Results: CRISPRs were found in all Salinispora strains, with the majority containing multiple loci and different Cas array subtypes. Of the six subtypes identified, three have not been previously described. A lower prophage frequency in S. arenicola was associated with a higher fraction of spacers matching Salinispora prophages compared to S. tropica, suggesting differing defensive capacities between Salinispora species. The occurrence of related prophages in strains from distant locations, as well as spacers matching those prophages inserted throughout spacer arrays, indicate recurring encounters with widely distributed phages over time. Linkages of CRISPR features with Salinispora microdiversity pointed to subclade-specific contacts with mobile genetic elements (MGEs). This included lineage-specific spacer deletions or insertions, which may reflect weak selective pressures to maintain immunity or distinct temporal interactions with MGEs, respectively. Biogeographic patterns in spacer and prophage distributions support the concept that Salinispora spp. encounter localized MGEs. Moreover, the presence of spacers matching housekeeping genes suggests that CRISPRs may have functions outside of viral defense. Conclusions: This study provides a comprehensive examination of CRISPR-Cas systems in a broadly distributed group of environmental bacteria. The ubiquity and diversity of CRISPRs in Salinispora suggests that CRISPR-mediated interactions with MGEs represent a major force in the ecology and evolution of this cosmopolitan marine actinomycete genus.

54 ENVIRONMENTAL SCIENCES↗

A modified Susceptible-Infected-Recovered model for observed under-reported incidence data

Fitting Susceptible-Infected-Recovered (SIR) models to incidence data is problematic when not all infected individuals are reported. Assuming an underlying SIR model with general but known distribution for the time to recovery, this paper derives the implied differential-integral equations for observed incidence data when a fixed fraction of newly infected individuals are not observed. The parameters of the resulting system of differential equations are identifiable. Using these differential equations, we develop a stochastic model for the conditional distribution of current disease incidence given the entire past history of reported cases. We estimate the model parameters using Bayesian Markov Chain Monte-Carlo sampling of the posterior distribution. We use our model to estimate the transmission rate and fraction of asymptomatic individuals for the current Coronavirus 2019 outbreak in eight American Countries: the United States of America, Brazil, Mexico, Argentina, Chile, Colombia, Peru, and Panama, from January 2020 to May 2021. Our analysis reveals that the fraction of reported cases varies across all countries. For example, the reported incidence fraction for the United States of America varies from 0.3 to 0.6, while for Brazil it varies from 0.2 to 0.4.

60 APPLIED LIFE SCIENCES↗

Solar Activity and the Sea-surface Temperature Record-evidence of a Long-period Variation in Solar Total Irradiance

There have been many suggestions over the years of a connection between solar activity and the Earth's climate on time scales long compared to the 11-year sunspot cycle. They have remained little more than suggestions largely because of the major uncertainties in the climate record itself, and the difficulty in trying to compile a global average from an assembly of measurements that are uneven in both quality and distribution. Different climate time response to solar activity, some suggesting a positive correlation, some a negative correlation, and some no correlation at all. The only excuse for making yet another such suggestion is that much effort has been devoted in recent years to compiling climate records for the past century or more that are internally consistent and believable, and that a decadal-scale record of solar total irradiance is emerging from spacecraft measurements, and can be used to set limits on the variation that is likely to have occurred on these time scales. The work described here was originally inspired by the observation that the time series of globally averaged sea-surface temperatures over the past 120 years or so, as compiled by the British Meteorological Office group (Folland and Kates, 1984), bore a resonable similarity to the long-term average sunspot number, which is an indicator of the secular variability of solar activity. The two time series are shown where the sunspot number is shown as the 135-month running mean, and the SST variation is shown as the departure from an arbitrary average value. The simplest explanation of the similarity, if one accepts it as other than coincidental, is that the sun's luminosity may have been varying more or less in step with the level of solar activity, or in other words that there is a close coupling between the sun's magnetic condition and its radiative output on time scales longer than the 11-year cycle. Such an idea is not new, and in fact the time series shown can be regarded as a modern extension of the proposal put forward by Eddy (1977) to explain the covariance between various global climate indicators and solar activity as revealed by the C-14 record over the past millenium.

Reid, George C.↗