Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “switching”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,693 records · Page 94

Optimization of magnetic switches for single particle and cell transport

The ability to manipulate an ensemble of single particles and cells is a key aim of lab-on-a-chip research; however, the control mechanisms must be optimized for minimal power consumption to enable future large-scale implementation. Recently, we demonstrated a matter transport platform, which uses overlaid patterns of magnetic films and metallic current lines to control magnetic particles and magnetic-nanoparticle-labeled cells; however, we have made no prior attempts to optimize the device geometry and power consumption. Here, we provide an optimization analysis of particle-switching devices based on stochastic variation in the particle's size and magnetic content. These results are immediately applicable to the design of robust, multiplexed platforms capable of transporting, sorting, and storing single cells in large arrays with low power and high efficiency.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Low frequency noise in the unstable contact region of Au-to-Au microcontact for microelectromechanical system switches

The noise behavior of Au-to-Au microcontact for microelectromechanical system switches has been experimentally studied in the unstable contact region. The results suggest that the electrical conduction remains nonmetallic at the initial stage during contact formation due to the existence of alien films, and traps in the alien layer located at the contact interface could play an important role in determining the conduction noise. The conduction fluctuation induced by electron trapping-detrapping associated with the hydrocarbon layer is found to be an intrinsic noise source contributing to the low frequency noise in the unstable contact region.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Thermal analysis of an indirectly heat pulsed non-volatile phase change material microwave switch

We show the finite element simulation of the melt/quench process in a phase change material (GeTe, germanium telluride) used for a radio frequency switch. The device is thermally activated by an independent NiCrSi (nickel chrome silicon) thin film heating element beneath a dielectric separating it electrically from the phase change layer. A comparison is made between the predicted and experimental minimum power to amorphize (MPA) for various thermal pulse powers and pulse time lengths. By including both the specific heat and latent heat of fusion for GeTe, we find that the MPA and the minimum power to crystallize follow the form of a hyperbola on the power time effect plot. We also find that the simulated time at which the entire center GeTe layer achieves melting accurately matches the MPA curve for pulse durations ranging from 75–1500 ns and pulse powers from 1.6–4 W.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Metallic to hopping conduction transition in Ta{sub 2}O{sub 5−x}/TaO{sub y} resistive switching device

In this Letter, a comprehensive analysis of how the metallic behavior transition to hopping was presented by studying the transport mechanisms of low resistance states (LRS) in Ta{sub 2}O{sub 5−x}/TaO{sub y} resistive switching devices at very low temperatures. Three types of conduction behaviors were reported through temperature-dependent measurements ranging from 5 K to 250 K. Memory cells at low LRS show metallic behavior due to the formation of metallic filament. The temperature dependence of resistance at medium LRS exhibits an interesting phenomenon that a positive temperature coefficient transfers into a negative one at temperature of 20 K. Detailed analysis reveals that this phenomenon is caused by the coexistence of extended and localized states, with metallic conduction at higher temperatures and variable-range hopping at lower temperatures. Carrier transport at high LRS is dominated by electrons hopping conduction with nearest-neighboring hopping conduction changing into variable-range hopping as temperature decreases.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effects of ZrO{sub 2} doping on HfO{sub 2} resistive switching memory characteristics

A resistive switching (RS) random access memory device with ZrO{sub 2}-doped HfO{sub 2} exhibits better RS performance than that with pure HfO{sub 2}. In particular, I{sub res}, V{sub res}, and V{sub set} are reduced by approximately 58%, 38%, and 39%, respectively, when HfO{sub 2} is doped with ZrO{sub 2} (9 at. %). In addition, the ZrO{sub 2} doping in HfO{sub 2} makes the distribution of most parameters steeper. Transmission electron microscopy (TEM) analysis reveals that the deposited zirconium-doped hafnium oxide (HZO) (9 at. %) is polycrystalline. Elemental mapping results by scanning TEM–energy dispersive spectroscopy also prove that ZrO{sub 2} is uniformly distributed in the HZO (9 at. %) film. The possible mechanism for the improvement in the RS characteristics is also suggested on the basis of the X-ray photoelectron spectroscopy results and filamentary RS mechanism. These results suggest that the ZrO{sub 2} doping into HfO{sub 2} likely not only will reduce power consumption but also will improve cyclic endurance by controlling the nonstoichiometric phase.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Multiphoton photoluminescence contrast in switched Mg:LiNbO{sub 3} and Mg:LiTaO{sub 3} single crystals

We observed a multiphoton luminescence contrast between virgin and single-switched domains in Mg-doped LiNbO{sub 3} (LNO) and LiTaO{sub 3} (LTO) single crystals with different doping levels of 0–7 mol. % and 0–8 mol. %, respectively. A luminescence contrast in the range of 3% was measured between as-grown and electrically inverted domain areas in Mg:LNO samples, while the contrast reaches values of up to 30% for the Mg:LTO case. Under annealing, an exponential decay of the domain contrast was observed. The activation energy of about 1 eV being determined for the decay allowed a comparison with reported activation energies of associated defects, clearly illustrating a strong connection between thermal contrast decay and the H{sup +} and Li{sup +}-ion mobility. Finally, performing similar experiments on oxidized samples undoubtedly demonstrated that the origin of the reported luminescence contrast is strongly connected with lithium ions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Role of oxygen vacancies in resistive switching in Pt/Nb-doped SrTiO{sub 3}

Oxygen vacancies at the metal/oxide interface, driven by an electric field, have been considered responsible for the switching to the low-resistance state. We studied the electrical properties, along with microscopic observations, of the Pt/Nb-doped SrTiO{sub 3} (001) single-crystal system. Electron energy loss spectroscopy revealed highly accumulated oxygen vacancies at the interface in the high-resistance state, contrasting to common explanation. Higher resistance state by more oxygen vacancies was further confirmed in Pt/H{sub 2}-annealed SrTiO{sub 3}. These results suggest the presence of an interfacial state which dominantly determined the resistivity by changing the barrier height at the interface.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Nanosecond high-power dense microplasma switch for visible light

Spark discharges in high-pressure gas are known to emit a broadband spectrum during the first 10 s of nanoseconds. We present calibrated spectra of high-pressure discharges in xenon and show that the resulting plasma is optically thick. Laser transmission data show that such a body is opaque to visible light, as expected from Kirchoff's law of thermal radiation. Nanosecond framing images of the spark absorbing high-power laser light are presented. The sparks are ideal candidates for nanosecond, high-power laser switches.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Solitary pulse-on-demand production by optical injection locking of passively Q-switched InGaN diode laser near lasing threshold

In this letter, we investigate the behavior of a Q-switched InGaN multi-section laser diode (MSLD) under optical injection from a continuous wave external cavity diode laser. We obtain solitary optical pulse generation when the slave MSLD is driven near free running threshold, and the peak output power is significantly enhanced with respect to free running configuration. When the slave laser is driven well above threshold, optical injection reduces the peak power. Using standard semiconductor laser rate equation model, we find that both power enhancement and suppression effects are the result of partial bleaching of the saturable absorber by externally injected photons.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The ensemble switch method for computing interfacial tensions

We present a systematic thermodynamic integration approach to compute interfacial tensions for solid-liquid interfaces, which is based on the ensemble switch method. Applying Monte Carlo simulations and finite-size scaling techniques, we obtain results for hard spheres, which are in agreement with previous computations. The case of solid-liquid interfaces in a variant of the effective Asakura-Oosawa model and of liquid-vapor interfaces in the Lennard-Jones model are discussed as well. We demonstrate that a thorough finite-size analysis of the simulation data is required to obtain precise results for the interfacial tension.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A Q-switched Ho:YAG laser assisted nanosecond time-resolved T-jump transient mid-IR absorbance spectroscopy with high sensitivity

Knowledge of dynamical structure of protein is an important clue to understand its biological function in vivo. Temperature-jump (T-jump) time-resolved transient mid-IR absorbance spectroscopy is a powerful tool in elucidating the protein dynamical structures and the folding/unfolding kinetics of proteins in solution. A home-built setup of T-jump time-resolved transient mid-IR absorbance spectroscopy with high sensitivity is developed, which is composed of a Q-switched Cr, Tm, Ho:YAG laser with an output wavelength at 2.09 μm as the T-jump heating source, and a continuous working CO laser tunable from 1580 to 1980 cm{sup −1} as the IR probe. The results demonstrate that this system has a sensitivity of 1 × 10{sup −4} ΔOD for a single wavelength detection, and 2 × 10{sup −4} ΔOD for spectral detection in amide I′ region, as well as a temporal resolution of 20 ns. Moreover, the data quality coming from the CO laser is comparable to the one using the commercial quantum cascade laser.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Single-pulse picking at kHz repetition rates using a Ge plasma switch at the free-electron laser FELBE

We demonstrate a system for picking of mid-infrared and terahertz (THz) radiation pulses from the free-electron laser (FEL) FELBE operating at a repetition rate of 13 MHz. Single pulses are reflected by a dense electron-hole plasma in a Ge slab that is photoexcited by amplified near-infrared (NIR) laser systems operating at repetition rates of 1 kHz and 100 kHz, respectively. The peak intensity of picked pulses is up to 400 times larger than the peak intensity of residual pulses. The required NIR fluence for picking pulses at wavelengths in the range from 5 μm to 30 μm is discussed. In addition, we show that the reflectivity of the plasma decays on a time scale from 100 ps to 1 ns dependent on the wavelengths of the FEL and the NIR laser. The plasma switch enables experiments with the FEL that require high peak power but lower average power. Furthermore, the system is well suited to investigate processes with decay times in the μs to ms regime, i.e., much longer than the 77 ns long pulse repetition period of FELBE.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Dichotomous noise models of gene switches

Molecular noise in gene regulatory networks has two intrinsic components, one part being due to fluctuations caused by the birth and death of protein or mRNA molecules which are often present in small numbers and the other part arising from gene state switching, a single molecule event. Stochastic dynamics of gene regulatory circuits appears to be largely responsible for bifurcations into a set of multi-attractor states that encode different cell phenotypes. The interplay of dichotomous single molecule gene noise with the nonlinear architecture of genetic networks generates rich and complex phenomena. In this paper, we elaborate on an approximate framework that leads to simple hybrid multi-scale schemes well suited for the quantitative exploration of the steady state properties of large-scale cellular genetic circuits. Through a path sum based analysis of trajectory statistics, we elucidate the connection of these hybrid schemes to the underlying master equation and provide a rigorous justification for using dichotomous noise based models to study genetic networks. Numerical simulations of circuit models reveal that the contribution of the genetic noise of single molecule origin to the total noise is significant for a wide range of kinetic regimes.

60 APPLIED LIFE SCIENCES↗

Unipolar resistive switching in metal oxide/organic semiconductor non-volatile memories as a critical phenomenon

Diodes incorporating a bilayer of an organic semiconductor and a wide bandgap metal oxide can show unipolar, non-volatile memory behavior after electroforming. The prolonged bias voltage stress induces defects in the metal oxide with an areal density exceeding 10{sup 17 }m{sup −2}. We explain the electrical bistability by the coexistence of two thermodynamically stable phases at the interface between an organic semiconductor and metal oxide. One phase contains mainly ionized defects and has a low work function, while the other phase has mainly neutral defects and a high work function. In the diodes, domains of the phase with a low work function constitute current filaments. The phase composition and critical temperature are derived from a 2D Ising model as a function of chemical potential. The model predicts filamentary conduction exhibiting a negative differential resistance and nonvolatile memory behavior. The model is expected to be generally applicable to any bilayer system that shows unipolar resistive switching.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Exploiting adiabatically switched RF-field for manipulating spin hyperpolarization induced by parahydrogen

A method for precise manipulation of non-thermal nuclear spin polarization by switching a RF-field is presented. The method harnesses adiabatic correlation of spin states in the rotating frame. A detailed theory behind the technique is outlined; examples of two-spin and three-spin systems prepared in a non-equilibrium state by Para-Hydrogen Induced Polarization (PHIP) are considered. We demonstrate that the method is suitable for converting the initial multiplet polarization of spins into net polarization: compensation of positive and negative lines in nuclear magnetic resonance spectra, which is detrimental when the spectral resolution is low, is avoided. Such a conversion is performed for real two-spin and three-spin systems polarized by means of PHIP. Potential applications of the presented technique are discussed for manipulating PHIP and its recent modification termed signal amplification by reversible exchange as well as for preparing and observing long-lived spin states.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Early stage time evolution of a dense nanosecond microdischarge used in fast optical switching applications

The mechanism of high-voltage nanosecond microdischarges is studied by the self-consistent two-dimensional Particle-in-Cell/Monte Carlo Collisions model. These microdischarges were recently proposed for use as fast switches of visible light in Bataller et al. [Appl. Phys. Lett. 105, 223501 (2014)]. The microdischarge is found to develop in two stages. The first stage is associated with the electrons initially seeded in the cathode-anode gap. These electrons lead to the formation of a cathode-directed streamer. The second stage starts when the secondary electron emission from the cathode begins. In this stage, a rather dense plasma (∼10{sup 16 }cm{sup −3}) is generated which results in the narrow cathode sheath. The electric field in this sheath exceeds the critical electric field which is necessary for the runaway electrons generation. We have found that the presence of these energetic electrons is crucial for the discharge maintenance.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Monolayer MoS{sub 2} self-switching diodes

This paper presents a new molybdenum disulphide (MoS{sub 2}) nanodevice that acts as a two-terminal field-effect rectifier. The device is an atomically-thin two-dimensional self-switching diode (SSD) that can be realized within a single MoS{sub 2} monolayer with very minimal process steps. Quantum simulation results are presented confirming the device's operation as a diode and showing strong non-linear I-V characteristics. Interestingly, the device shows p-type behavior, in which conduction is dominated by holes as majority charge carriers and the flow of reverse current is enhanced, while the flow of forward current is suppressed, in contrast to monolayer graphene SSDs, which behave as n-type devices. The presence of a large bandgap in monolayer MoS{sub 2} results in strong control over the channel, showing complete channel pinch-off in forward conduction, which was confirmed with transmission pathways plots. The device exhibited large leakage tunnelling current through the insulating trenches, which may have been due to the lack of passivation; nevertheless, reverse current remained to be 6 times higher than forward current, showing strong rectification. The effect of p-type substitutional channel doping of sulphur with phosphorus was investigated and showed that it greatly enhances the performance of the device, increasing the reverse-to-forward current rectification ratio more than an order of magnitude, up to a value of 70.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Development of a compact vertical-cavity surface-emitting laser end-pumped actively Q-switched laser for laser-induced breakdown spectroscopy

This paper reports the development of a compact and portable actively Q-switched Nd:YAG laser and its applications in laser-induced breakdown spectroscopy (LIBS). The laser was end-pumped by a vertical-cavity surface-emitting laser (VCSEL). The cavity lases at a wavelength of 1064 nm and produced pulses of 16 ns with a maximum pulse energy of 12.9 mJ. The laser exhibits a reliable performance in terms of pulse-to-pulse stability and timing jitter. The LIBS experiments were carried out using this laser on NIST standard alloy samples. Shot-to-shot LIBS signal stability, crater profile, time evolution of emission spectra, plasma electron density and temperature, and limits of detection were studied and reported in this paper. The test results demonstrate that the VCSEL-pumped solid-state laser is an effective and compact laser tool for laser remote sensing applications.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗