SEARCH · Engineering Papers

Results for “strength”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,693 records · Page 94

All sources NASA NTRS DOE OSTI

NASA NTRS1990

Moments of dipole oscillator-strength distribution for the helium sequence

The moments S(mu) for mu at least -6 but no more than 2 and L(mu) for mu = 0, 1, and 2 are calculated for the helium sequence for atomic numbers (Z) up to 30 under a screened hydrogenic model. The model describes the atom by single-particle hydrogenic wave functions and treats the initial and the final state as characterized by two different effective charge parameters Zi and Zf, respectively. The differential oscillator strength of the screened hydrogenic model is asymptotically expanded. Assuming the value of 287.6 for the coefficient of the term epsilon to the -7/2 for helium atoms, the parameter Zf is determined for the helium sequence.

Khan, F.↗

NASA NTRS1990

Calculation of Weibull strength parameters, Batdorf flaw density constants and related statistical quantities using PC-CARES

This manual describes the operation and theory of the PC-CARES (Personal Computer-Ceramic Analysis and Reliability Evaluation of Structures) computer program for the IBM PC and compatibles running PC-DOS/MS-DOR OR IBM/MS-OS/2 (version 1.1 or higher) operating systems. The primary purpose of this code is to estimate Weibull material strength parameters, the Batdorf crack density coefficient, and other related statistical quantities. Included in the manual is the description of the calculation of shape and scale parameters of the two-parameter Weibull distribution using the least-squares analysis and maximum likelihood methods for volume- and surface-flaw-induced fracture in ceramics with complete and censored samples. The methods for detecting outliers and for calculating the Kolmogorov-Smirnov and the Anderson-Darling goodness-of-fit statistics and 90 percent confidence bands about the Weibull line, as well as the techniques for calculating the Batdorf flaw-density constants are also described.

Szatmary, Steven A.↗

NASA NTRS1990

Damage assessment and residual compression strength of thick composite plates with through-the-thickness reinforcements

Damage in composite materials was studied with through-the-thickness reinforcements. As a first step it was necessary to develop new ultrasonic imaging technology to better assess internal damage of the composite. A useful ultrasonic imaging technique was successfully developed to assess the internal damage of composite panels. The ultrasonic technique accurately determines the size of the internal damage. It was found that the ultrasonic imaging technique was better able to assess the damage in a composite panel with through-the-thickness reinforcements than by destructively sectioning the specimen and visual inspection under a microscope. Five composite compression-after-impact panels were tested. The compression-after-impact strength of the panels with the through-the-thickness reinforcements was almost twice that of the comparable panel without through-the-thickness reinforcement.

Smith, Barry T.↗

NASA NTRS1990

Effect of hydrogen on the strength and microstructure of selected ceramics

Ceramics in monolithic form and as composite constituents in the form of fibers, matrices, and coatings are currently being considered for a variety of high-temperature applications in aeronautics and space. Many of these applications involve exposure to a hydrogen-containing environment. The compatibility of selected ceramics in gaseous high-temperature hydrogen is assessed. Environmental stability regimes for the long term use of ceramic materials are defined by the parameters of temperature, pressure, and moisture content. Thermodynamically predicted reactions between hydrogen and several monolithic ceramics are compared with actual performance in a controlled environment. Morphology of hydrogen attack and the corresponding strength degradation is reported for silicon carbide, silicon nitride, alumina, magnesia, and mullite.

Herbell, Thomas P.↗

NASA NTRS1991

Investigation of interfacial shear strength in SiC/Si3N4 composites

A fiber push-out technique was used to determine fiber/matrix interfacial shear strength (ISS) for silicon carbide fiber reinforced reaction-bonded silicon nitride (SiC/RBSN) composites in the as-fabricated condition and after consolidation by hot isostatic pressing (HIPing). In situ video microscopy and acoustic emission detection greatly aided the interpretation of push-out load/displacement curves.

Eldridge, J. I.↗

NASA NTRS1984

Method for imparting strength to intermetallic phases

A method for achieving both improved high strength and improved ductility ·in intermediate phases is provided. The method, briefly stated, comprises the steps of providing a melt whose composition substantially corresponds to that of a preselected intermetallic phase having a crystal structure of the L1 2 type, such as nickel. aluminide, modified with from about 0.01 to 2.5 atomic percent boron, and rapidly solidifying the melt at a cooling rate of at least about 10 3 ° C./second to form a solid body, the principal phase of which is of the L1 2 type crystal structure in either its ordered or disordered state.

Shyh-Chin Huang↗

NASA NTRS1991

Orr-Sherby-Dorn creep strengths of the refractory-metal alloys C-103, ASTAR-811C, W-5Re, and W-25Re

Available creep data for the refractory-metal alloys C-103 (Nb/10 percent Hf/1 percent Ti/0.7 percent Zr), ASTAR-811C (Ta/8 percent W/1 percent Re/0.7 percent Hf/0.025 percent C), W-5Re (W/5 percent Re), and W-25Re (W/25 percent Re) were correlated by the Orr-Sherby-Dorn method and extrapolated to 1 percent creep over 10 years. Useful life was specified to be 2 standard estimates of error below the mean surface through the data. Over the temperature range of 1200 to 1800 K, ASTAR-811C was found to be the strongest of these alloys. In particular, ASTAR-811C was found to have at 1800 K the same creep strength as W-25Re at 1420 K. The difference between these results and those of Horak and Booker likely devolves from the comparative lack of long-time data on tungsten alloys.

English, Robert E.↗

NASA NTRS1991

Shock strength effects on separated flows in non-equilibrium chemically reacting air - Shock wave/boundary layer interaction

This work is part of a general study to examine the effects of nonequilibrium chemical reactions on hypersonic separated flows. In particular, the work presented is the first attempt to quantitatively predict the effects of impinging shock strength on the separation region in non-equilibrium chemically reacting air over a flat plate. Of special interest is the local heat transfer rate to the plate at the reattachment point. The effects of chemically non-equilibrium on the flow field are assessed by making direct comparisons to the results calculated assuming a calorically perfect flow. Chemical reactions are found to increase heat transfer rates, and this increase becomes significantly larger as Reynolds number increases.

Ballaro, Charles A.↗

NASA NTRS1991

Adaptation of sleep and circadian rhythms to the Antarctic summer - A question of zeitgeber strength

Adaptation of sleep and circadian rhythms was examined in three temperate zone dwellers arriving in Antarctica during summer. Rectal temperature, wrist activity, and heart rate were monitored continuously, sleep timing and quality noted on awakening, and mood and fatigue rated every 2 h while awake. Sleep was poorer in 2/3 subjects in Antarctica, where all subjects reported more difficulty rising. Sleep occurred at the same clock times in New Zealand and Antarctica, however, the rhythms of temperature, activity, and heart rate underwent a delay of about of 2 h. The subject with the most Antarctic experience had the least difficulty adapting to sleeping during constant daylight. The subject with the most delayed circadian rhythms had the most difficulty. The delay in the circadian system with respect to sleep and clock time is hypothesized to be due to differences in zeitgeber strength and/or zeitgeber exposure between Antarctica and New Zealand.

Gander, Philippa H.↗

NASA NTRS1991

Investigation of interfacial shear strength in SiC/Si3N4 composites

Eldridge, J. I.↗

NASA NTRS1992

An investigation into geometry and microstructural effects upon the ultimate tensile strengths of butt welds

A mathematical theory was evaluated empirically. This theory predicts weld ultimate tensile strength based on material properties and fusion line angles, mismatch, peaking, and weld widths. Welds were made on 1/4 and 1/2 in. aluminum 2219-T87, their geometries were measured, they were tensile tested, and these results were compared to theoretical predictions. Statistical analysis of results was performed to evaluate correlation of theory to results for many different categories of weld geometries.

Gordon, Stephen S.↗

NASA NTRS1992

Development of an empirically based dynamic biomechanical strength model

The focus here is on the development of a dynamic strength model for humans. Our model is based on empirical data. The shoulder, elbow, and wrist joints are characterized in terms of maximum isolated torque, position, and velocity in all rotational planes. This information is reduced by a least squares regression technique into a table of single variable second degree polynomial equations determining the torque as a function of position and velocity. The isolated joint torque equations are then used to compute forces resulting from a composite motion, which in this case is a ratchet wrench push and pull operation. What is presented here is a comparison of the computed or predicted results of the model with the actual measured values for the composite motion.

Pandya, A.↗

NASA NTRS1991

A lightweight, high strength dexterous manipulator for commercial applications

The concept, design, and features are described of a lightweight, high strength, modular robot manipulator being developed for space and commercial applications. The manipulator has seven fully active degrees of freedom and is fully operational in 1 G. Each of the seven joints incorporates a unique drivetrain design which provides zero backlash operation, is insensitive to wear, and is single fault tolerant to motor or servo amplifier failure. Feedback sensors provide position, velocity, torque, and motor winding temperature information at each joint. This sensing system is also designed to be single fault tolerant. The manipulator consists of five modules (not including gripper). These modules join via simple quick-disconnect couplings and self-mating connectors which allow rapid assembly and/or disassembly for reconfiguration, transport, or servicing. The manipulator is a completely enclosed assembly, with no exposed components or wires. Although the initial prototype will not be space qualified, the design is well suited to meeting space requirements. The control system provides dexterous motion by controlling the endpoint location and arm pose simultaneously. Potential applications are discussed.

Marzwell, Neville I.↗

NASA NTRS1992

Measurement of multiaxial ply strength by an off-axis flexure test

An off-axis flexure (OAF) test was performed to measure ply strength under multiaxial stress states. This test involves unidirectional off-axis specimens loaded in bending, using an apparatus that allows these anisotropic specimens to twist as well as flex without the complications of a resisting torque. A 3D finite element stress analysis verified that simple beam theory could be used to compute the specimen bending stresses at failure. Unidirectional graphite/epoxy specimens with fiber angles ranging from 90 deg to 15 deg have combined normal and shear stresses on their failure planes that are typical of 45 deg plies in structural laminates. Tests for a range of stress states with AS4/3501-6 specimens showed that both normal and shear stresses on the failure plane influenced cracking resistance. This OAF test may prove to be useful for generating data needed to predict ply cracking in composite structures and may also provide an approach for studying fiber-matrix interface failures under stress states typical of structures.

Crews, John H., Jr.↗

NASA NTRS1992

The effect of weld porosity on the cryogenic fatigue strength of ELI grade Ti-5Al-2.5Sn

The effect of weld porosity on the fatigue strength of ELI grade Ti-5Al-2.5Sn at cryogenic temperature was determined. A series of high cycle fatigue (HCF) and tensile tests were performed at -320 F on specimens made from welded sheets of the material. All specimens were tested with weld beads intact and some amount of weld offset. Specimens containing porosity and control specimens containing no porosity were tested. Results indicate that for the weld configuration tested, the fatigue life of the material is not affected by the presence of spherical embedded pores.

Rogers, P. R.↗

NASA NTRS1990

Influence of interfacial shear strength on the mechanical properties of SiC fiber reinforced reaction-bonded silicon nitride matrix composites

An evaluation is made of the influence of interfacial microstructure and shear strength on the mechanical properties of a 30 vol pct uniaxially-aligned SiC fiber-reinforced reaction-bonded Si3N4-matrix composite whose interface microstructure was varied through control of fabrication conditions and by heat-treatment in an oxidizing environment. The carbon-rich coating of the as-produced SiC fibers was stable in composites fabricated at 1200 C in an N or N + 4-percent H mixture for 40 hrs. This coating was degraded in composites fabricated at 1350 C in N + 4 percent H for 40 and 72 hrs, as well as after heat-treatment in an oxidizing environment at 600 C for 100 hrs even after fabrication at 1200 C in N. This degradation occurred via carbon removal.

Bhatt, Ramakrishna T.↗

NASA NTRS1992

Compressive strength of directionally solidified NiAl-NiAlNb intermetallics at 1200 and 1300 K

Results are presented from measurements of 1200 K and 1300 K compressive properties of two directionally solidified NiAl-NiAlNb compositions (in at. pct): Ni-41.75Al-16.5Nb (eutectic composition) and Ni-47.5Al-8.9Nb-1.3C (Al-rich composition). Results showed that the strength of the eutectic was a factor of 2 greater than that of the Al-rich composition. However, the analysis of the compressive stress-strain data indicated that the deformation mechanism was the same in both materials.

Whittenberger, J. D.↗

NASA NTRS1991

Damage assessment and residual compression strength of thick composite plates with through-the-thickness reinforcements

Damage in composite materials was studied with through-the-thickness reinforcements. As a first step it was necessary to develop new ultrasonic imaging technology to better assess internal damage of the composite. A useful ultrasonic imaging technique was successfully developed to assess the internal damage of composite panels. The ultrasonic technique accurately determines the size of the internal damage. It was found that the ultrasonic imaging technique was better able to assess the damage in composite panel with through-the-thickness reinforcements than by destructively sectioning the specimen and visual inspection under a microscope. Five composite compression-after-impact panels were tested. The compression-after-impact strength of the panels with the through-the-thickness reinforcements was almost twice that of the comparable panel without through-the-thickness reinforcement.

Smith, Barry T.↗