Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “saline”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,693 records · Page 94

Gallbladder Cryoablation: Proof of Concept in a Swine Model for a Percutaneous Alternative to Cholecystectomy

PurposeTo investigate the feasibility of percutaneous gallbladder cryoablation (GBC) under CT guidance in a swine model with histopathologic correlation.Materials and MethodsInstitutional Animal Care and Use Committee approval was obtained for this study protocol. Five pigs underwent GBC. Under CT guidance, 3–4 cryoprobes were positioned percutaneously at the gallbladder margins. Thermocouple probes were placed percutaneously at the gallbladder fundus, neck, free wall, and gallbladder fossa. Two freeze–thaw cycles ranging from 10 to 26 min were performed. The subjects were sacrificed 5 h after cryoablation. The gallbladder and bile ducts were resected, stained, and examined microscopically.ResultsGBC was completed in all subjects. A 10-mm ablation margin was achieved beyond all gallbladder walls. Thermocouple probes reached at least −20 °C. Intra-procedural body temperature decreased to a minimum of 35 °C but recovered after the procedure. Intra- and post-procedural vital signs otherwise remained within physiologic parameters. Non-target ablation occurred in the stomach and colon of the first two subjects. Histology demonstrated complete denudation of the gallbladder epithelium, hemorrhage, and edema within the muscularis layer, and preservation of the microscopic architecture of the common bile duct in all cases.ConclusionPercutaneous gallbladder cryoablation is feasible, with adequate ablation margins obtained and histologic changes demonstrating transmural necrosis. Adjacent structures included in the ablation may require conservative ablation zones, hydrodissection, or continuous saline lavage.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

An Attempt to Shorten Loading Time of Epirubicin into DC Beads{sup ®} Using Vibration and a Sieve

PurposeWe investigated the possibility of shortening the time required for loading epirubicin into calibrated polyvinyl alcohol-based hydrogel beads (DC Beads{sup ®}) to be used for transarterial chemoembolization.MethodAfter separating the beads suspended in phosphate-buffered saline (PBS) solution by the use of a sieve (clearance 75 µm), epirubicin hydrochloride (EH) was loaded for 20, 30, or 60 s under vibration into DC beads. The EH loading rate into conventionally prepared (control) beads, i.e., beads loaded for 30 min without vibration, and vibration-loaded beads were calculated from the residual EH concentration in the bead-depleted EH solution. The amount of EH eluted from conventionally and vibration-loaded samples into a PBS solution (pH 7.0) was measured at 15 and 30 min and 1, 2, 6, 12, and 24 h. We also recorded the inhibitory effect of the PBS solution on the loading time. Using frozen sections, the EH load in the beads was evaluated visually under a fluorescence microscope.ResultsSpectrophotometry (495 nm) showed that the loading rate was 98.98 ± 0.34, 99.02 ± 0.32, and 99.50 ± 0.11 % with 20-, 30-, and 60-s vibration, respectively. The eluted rate was statistically similar between vibration- and statically loaded (control) beads. The PBS solution hampered EH loading into the beads. Visually, the distribution of EH in conventionally and vibration-loaded DC beads was similar.DiscussionThe use of vibration and the removal of PBS solution when epirubicin hydrochloride was loaded into DC beads dramatically shortened the loading time of epirubicin hydrochloride into DC beads.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Bariatric Arterial Embolization with Non-spherical Polyvinyl Alcohol Particles for Ghrelin Suppression in a Swine Model

PurposeTo evaluate the effect of bariatric arterial embolization (BAE) with non-spherical polyvinyl alcohol (PVA) particles on systemic ghrelin levels, weight change, and gastric ulceration risk in a swine model.Materials and MethodsFrom March 2014 to February 2015, ten healthy swine were used in the study (mean weight 31.5 kg; range 24.0–41.5 kg). The animals were randomly assigned to two groups: the embolized group (n = 5) in which BAE was performed and the control group (n = 5). In the embolized group, BAE was performed by selectively infusing 150–250 or 50–150 μm PVA into the gastric arteries that supplied the fundus of the stomach. In the control group, a sham procedure was performed with saline infusion. Plasma ghrelin levels were prospectively obtained at baseline and every 2 weeks thereafter. Endoscopy was performed 3 weeks after BAE to see whether any gastric ulcer occurred. To determine the durability of the occluded arteries, repeated celiac trunk angiography was performed 8 weeks after BAE. Then, all the swine were killed and necropsies were performed.ResultsThe mean post-procedure ghrelin value decreased by 370.0 pg/mL in the embolized group at week 3 (mean 536.0 ± 334.3 pg/mL) and week 5 (mean 515.0 ± 150.0 pg/mL, p < 0.05) relative to baseline (880.0 ± 559.5 pg/mL), respectively, but ghrelin levels were not significantly decreased between the embolized and control groups. There was a significant body weight change as follows: 35.1 ± 9.5 to 46.6 ± 15.7 kg and 31.8 ± 5.8 to 41.2 ± 6.6 kg at baseline and endpoint in the control and embolized groups, respectively (p < 0.05). However, the difference between groups was not significant at endpoint. In the embolized group, ulcerations were identified in three animals (60%) and the recanalization of the embolized arteries was noted on follow-up angiography in three animals (60%), respectively.ConclusionBAE with PVA particles can transiently suppress ghrelin levels in embolized animals, but levels are not significantly different compared to controls. Stomach ulcerations were identified in 60% of the embolized animals.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Carbohydrate composition of mucus from scleractinian corals from the central Red Sea

Coral mucus is continuously released by most corals and acts as an important protective barrier and as a substrate for host-associated microbial communities due to its complex composition of carbohydrates, lipids, and proteins. On a reef scale, coral mucus functions as a particle trap, thereby retaining nutrients and energy in the ecosystem. Given the distinct environmental conditions in the Red Sea (high temperature, high salinity, high total alkalinity), we sought to investigate the carbohydrate composition of mucus from five corals from the central Red Sea. Our aim was to assess whether mucus from Red Sea corals is different from what is known from other corals and whether those differences could be aligned to putative beneficial functions with regard to the prevailing environment. Using gas chromatography/mass spectrometry, we detected nine sugars as the main prevalent carbohydrates. Although we detected significant differences between species with regard to the relative abundance of given carbohydrates, the identified sugars resembled those found in mucus from corals elsewhere, and we could corroborate high abundance of arabinose in acroporid corals. Taken together, our results suggest the presence of a common set of carbohydrates across a broad range of coral species from geographically diverse environments, highlighting the important role of mucus with regard to coral and reef ecosystem function.

59 BASIC BIOLOGICAL SCIENCES↗

An evaluation of experimental decadal predictions using CCSM4

This study assesses retrospective decadal prediction skill of sea surface temperature (SST) variability in initialized climate prediction experiments with the Community Climate System Model version 4 (CCSM4). Ensemble forecasts initialized with two different historical ocean and sea-ice states are evaluated and compared to an ensemble of uninitialized coupled simulations. Both experiments are subject to identical twentieth century historical radiative forcings. Each forecast consists of a 10-member ensemble integrated over a 10-year period. One set of historical ocean and sea-ice conditions used for initialization comes from a forced ocean-ice simulation driven by the Coordinated Ocean-ice Reference Experiments interannually varying atmospheric dataset. Following the Coordinated Model Intercomparison Project version 5 (CMIP5) protocol, these forecasts are initialized every 5 years from 1961 to 1996, and every year from 2000 to 2006. A second set of initial conditions comes from historical ocean state estimates obtained through the assimilation of in-situ temperature and salinity data into the CCSM4 ocean model. These forecasts are only available over a limited subset of the CMIP5 recommended start dates. Both methods result in retrospective SST prediction skill over broad regions of the Indian Ocean, western Pacific Ocean and North Atlantic Ocean that are significantly better than reference skill levels from a spatio-temporal auto-regressive statistical model of SST. However the subpolar gyre region of the North Atlantic stands out as the only region where the CCSM4 initialized predictions outperform uninitialized simulations. Some features of the ocean state estimates used for initialization and their impact on the forecasts are discussed.

Meteorology & Atmospheric Sciences↗

What causes the spread of model projections of ocean dynamic sea-level change in response to greenhouse gas forcing?

Abstract Sea levels of different atmosphere–ocean general circulation models (AOGCMs) respond to climate change forcing in different ways, representing a crucial uncertainty in climate change research. We isolate the role of the ocean dynamics in setting the spatial pattern of dynamic sea-level ( ζ ) change by forcing several AOGCMs with prescribed identical heat, momentum (wind) and freshwater flux perturbations. This method produces a ζ projection spread comparable in magnitude to the spread that results from greenhouse gas forcing, indicating that the differences in ocean model formulation are the cause, rather than diversity in surface flux change. The heat flux change drives most of the global pattern of ζ change, while the momentum and water flux changes cause locally confined features. North Atlantic heat uptake causes large temperature and salinity driven density changes, altering local ocean transport and ζ . The spread between AOGCMs here is caused largely by differences in their regional transport adjustment, which redistributes heat that was already in the ocean prior to perturbation. The geographic details of the ζ change in the North Atlantic are diverse across models, but the underlying dynamic change is similar. In contrast, the heat absorbed by the Southern Ocean does not strongly alter the vertically coherent circulation. The Arctic ζ change is dissimilar across models, owing to differences in passive heat uptake and circulation change. Only the Arctic is strongly affected by nonlinear interactions between the three air-sea flux changes, and these are model specific.

54 ENVIRONMENTAL SCIENCES↗

Greenhouse-gas forced changes in the Atlantic meridional overturning circulation and related worldwide sea-level change

Abstract The effect of anthropogenic climate change in the ocean is challenging to project because atmosphere-ocean general circulation models (AOGCMs) respond differently to forcing. This study focuses on changes in the Atlantic Meridional Overturning Circulation (AMOC), ocean heat content ( $$\Delta$$ Δ OHC), and the spatial pattern of ocean dynamic sea level ( $$\Delta \zeta$$ Δ ζ ). We analyse experiments following the FAFMIP protocol, in which AOGCMs are forced at the ocean surface with standardised heat, freshwater and momentum flux perturbations, typical of those produced by doubling $$\hbox {CO}_{{2}}$$ CO 2 . Using two new heat-flux-forced experiments, we find that the AMOC weakening is mainly caused by and linearly related to the North Atlantic heat flux perturbation, and further weakened by a positive coupled heat flux feedback. The quantitative relationships are model-dependent, but few models show significant AMOC change due to freshwater or momentum forcing, or to heat flux forcing outside the North Atlantic. AMOC decline causes warming at the South Atlantic-Southern Ocean interface. It does not strongly affect the global-mean vertical distribution of $$\Delta$$ Δ OHC, which is dominated by the Southern Ocean. AMOC decline strongly affects $$\Delta \zeta$$ Δ ζ in the North Atlantic, with smaller effects in the Southern Ocean and North Pacific. The ensemble-mean $$\Delta \zeta$$ Δ ζ and $$\Delta$$ Δ OHC patterns are mostly attributable to the heat added by the flux perturbation, with smaller effects from ocean heat and salinity redistribution. The ensemble spread, on the other hand, is largely due to redistribution, with pronounced disagreement among the AOGCMs.

54 ENVIRONMENTAL SCIENCES↗

Chemical evolution of groundwater in the Wilcox aquifer of the northern Gulf Coastal Plain, USA

The Wilcox aquifer is a major groundwater resource in the northern Gulf Coastal Plain (lower Mississippi Valley) of the USA, yet the processes controlling water chemistry in this clastic aquifer have received relatively little attention. The current study combines analyses of solutes and stable isotopes in groundwater, petrography of core samples, and geochemical modeling to identify plausible reactions along a regional flow path ∼300 km long. The hydrochemical facies evolves from Ca-HCO{sub 3} upgradient to Na-HCO{sub 3} downgradient, with a sequential zonation of terminal electron-accepting processes from Fe(III) reduction through SO{sub 4}{sup 2−} reduction to methanogenesis. In particular, decreasing SO{sub 4}{sup 2−} and increasing δ{sup 34}S of SO{sub 4}{sup 2−} along the flow path, as well as observations of authigenic pyrite in core samples, provide evidence of SO{sub 4}{sup 2−} reduction. Values of δ{sup 13}C in groundwater suggest that dissolved inorganic carbon is contributed both by oxidation of sedimentary organic matter and calcite dissolution. Inverse modeling identified multiple plausible sets of reactions between sampled wells, which typically involved cation exchange, pyrite precipitation, CH{sub 2}O oxidation, and dissolution of amorphous Fe(OH){sub 3}, calcite, or siderite. These reactions are consistent with processes identified in previous studies of Atlantic Coastal Plain aquifers. Contrasts in groundwater chemistry between the Wilcox and the underlying McNairy and overlying Claiborne aquifers indicate that confining units are relatively effective in limiting cross-formational flow, but localized cross-formational mixing could occur via fault zones. Consequently, increased pumping in the vicinity of fault zones could facilitate upward movement of saline water into the Wilcox.

58 GEOSCIENCES↗

Simulating seawater intrusion in a complex coastal karst aquifer using an improved variable-density flow and solute transport–conduit flow process model

VDFST-CFP (variable-density flow and solute transport–conduit flow process) is a density-dependent discrete-continuum numerical model for simulating seawater intrusion in a dual-permeability coastal karst aquifer. A previous study (Xu and Hu 2017) simulates variable-density flow only in a single conduit, and studies the parameter sensitivities only in the horizontal case (2D domain as horizontal section) by the VDFST-CFP model. This paper focuses on the density-dependent vertical case (2D domain as vertical section) with two major improvements: 1) when implementing double-conduit networks in the domain, simulated intruded plumes in the porous medium are extended in the double-conduit scenario, compared to the single-conduit system; 2) by quantifying micro-textures on the conduit wall by the Goudar-Sonnad equation and considering macro-structures as local head loss. Sensitivity analysis shows that medium hydraulic conductivity, conduit diameter and effective porosity are important parameters for simulating seawater intrusion in the discrete-continuum system. On the other hand, rougher micro-structures and additional macro-structure components on the conduit wall would reduce the distance of seawater intrusion to the conduit system, but, rarely affect salinity distribution in the matrix. Compared to the equivalent mean roughness height, the new method (with more detailed description of structure) simulates seawater intrusion slightly landward in the conduit system. Here, the macro-structure measured by local head loss is more reasonable but needs further study on conduit flow. Xu and Hu (2017) Development of a discrete-continuum VDFST-CFP numerical model for simulating seawater intrusion to a coastal karst aquifer with a conduit system.

58 GEOSCIENCES↗

Experimental study of drying effects during supercritical CO2 displacement in a pore network

Underground storage in geological aquifers is one of the most important options for large-scale mitigation of CO2. During the supercritical CO2 (scCO2) injection process, water dissolved in scCO2 may have significant impact on the displacement process. In this study, a series of wet scCO2 (WscCO2, 100% water saturation) and dry scCO2 (DscCO2, 0% water saturation) displacement experiments were conducted in micromodels for a large range of flowrates. The displacement was visualized using fluorescence microscopy. Results showed that DscCO2 saturations were up to 3.3 times larger than WscCO2 saturations when the capillary fingering dominated the displacement. And the specific interfacial areas and mobile fractions for the DscCO2 displacements were also much larger than those for WscCO2. The capillary forces combined with drying effects are identified as the leading causes for the considerably higher DscCO2 sweep efficiency. Results from this study showed the important impact of mutual solubility of scCO2 and water on the displacement process and saturation of scCO2 (SscCO2), suggesting that the conventional model describing the relationship between capillary pressure and SscCO2 need to be modified for the effect of the mutual dissolution of multiple phases to more adequately describe the scCO2 displacement process in saline aquifer formation.

Wang, Ying↗

Removing Cs within a continuous flow set-up by an ionic exchanger material transformable into a final waste form

Silica monoliths loaded with hexacyanoferrate (HCF) nanoparticles were designed and synthesized to selectively remove Cs + ions from an aqueous saline solution within a continuous flow set-up. The decontamination and hydrodynamic efficiency of this smart material was compared to other granularly supported HCF. Finally, a thermal treatment was applied to transform the HCF functionalized monolith into a final waste form matrix.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Cellular Composition and Expression of Cell Proliferation and Apoptosis Markers in Bone Marrow Cells after Heterotransplantation

The effects of heterotransplantation on bone marrow structures were studied in experimental male mice. Suspension of the bone marrow from feline femur (1 ml bone marrow diluted in isotonic saline, 1:2) was injected into the caudal vein. Heterotransplantation led to an increase in the level of serotonin involved in cell differentiation. In 2 days, the counts of all cells except erythroid cells decreased. Immunohistochemical analysis of Ki-67 marker within 40 min after transplantation showed a significant increase of cell proliferative activity in comparison with that in intact mice. At later terms, the expression of Ki-67 in bone marrow cells decreased, while the expression of apoptosis regulator P-53 increased, which was associated with the presence of numerous dead cells.

60 APPLIED LIFE SCIENCES↗

Mass removal efficiencies in water and consequences after a river diversion into coastal wetlands: second thoughts

Abstract Salinity control, nutrient additions, and sediment supply were directly or indirectly the rationale for a $220 million coastal wetland restoration project (Davis Pond River Diversion) that began in 2002. We sampled Mississippi River water going in and out of the receiving basin from 1999 to 2018 to understand why wetland loss increased after it began. There was a reduction in inorganic sediments, nitrogen (N), and phosphorus (P) concentrations within the ponding area of 77%, 39% and 34%, respectively, which is similar to that in other wetlands. But the average sediment accumulation of 0.6 mm year −1 inadequately balances the present-day 5.6 mm year −1 sea level rise or the 7.9 ± 0.13 mm year −1 accretion rates in these organic soils. Nutrients added likely reduced live belowground biomass and soil strength, and increased decomposition of the organic matter necessary to sustain elevations. The eutrophication of the downstream aquatic system from the diversion, principally by P additions, increased Chl a concentrations to a category of ‘poor’ water quality. We conclude that this diversion, if continued, will be a negative influence on wetland area and will eutrophy the estuary. It is a case history example for understanding the potential effects arising from proposed river diversions.

Turner, R. Eugene (ORCID:0000000307767506)↗

Growth and biochemical composition of the carrageenophyte Eucheumatopsis isiformis (Solieriaceae, Rhodophyta) under cultivation at different irradiance levels

Long-term production of a few species of Eucheuma and Kappaphycus from the Indo-Pacific Ocean supports the global carrageenan industry. The widespread use of vegetative propagation has resulted in low genetic diversity among farmed populations, making these crops increasingly vulnerable to diseases and environmental stressors, and resulting in declining yields and reduced biomass production over time. Insufficient efforts to develop and select new native cultivars, combined with the ecological risks posed by introducing nonindigenous species, underscore the urgent need to enhance cultivar diversification in eucheumatoid farming. Eucheumatopsis isiformis , a native carrageenophyte to the Atlantic Ocean, has potential for its cultivation in the Yucatán peninsula, Mexico. This study evaluated the growth and biochemical composition (pigments, elemental C and N, kappa/iota carrageenan ratio) of E. isiformis under different irradiance conditions in an indoor cultivation system. Specimens were collected in a subtidal population in Yucatán, Mexico, characterized, acclimatized to laboratory conditions, and exposed to five irradiance levels (71 ± 10.59 –1014 ± 65.85 µmol quanta m −2 s −1 ; 23.4 °C, salinity 33–34). Growth was measured weekly for six weeks, and elemental C and N content, pigment composition, and the kappa/iota-carrageenan ratio were evaluated. Growth and chromatic photoacclimation to light conditions were observed in all treatments. Highest growth rates (3.1–3.2% day −1 ) were registered between 238 ± 28.3 – 518 ± 44.3 µmol quanta m −2 s −1 , with a predominant iota-type carrageenan (0.97 ± 0.02) observed in all treatments. This study aims to provide guidelines for the successful development of the aquaculture of this carrageenophyte.

FTIR↗

Emulsifying and Cell Proliferative Abilities of the Exopolysaccharide Produced by Leguminous Plant Nodule Associated Bacterium Cronobacter sp

Exopolysaccharides (EPS) produced by bacteria are high molecular weight secondary metabolites having wide applications in food and pharmaceutical industry. In the present study, an exopolysaccharide producing bacterium was isolated from the root nodules of a leguminous plant and was studied for emulsification activity and biocompatibility using human dermal fibroblasts. Under optimum culture conditions, the purified EPS yield in modified YEM media was 2.8 g L{sup −1} and was identified as β-glucan with the molecular weight 15.57 × 10{sup 6} Da. The EPS showed high emulsifying activity against hydrocarbons such as petrol, kerosene, xylene, palm oil, coconut oil, and olive oil with emulsification index > 60% at 0.25 and 0.5% concentrations at 25 °C. The EPS was sensitive to high temperature, but the emulsions were stable at pH range 2–9 and in the salinity range of 1–20%. In vitro cell viability studies indicated that EPS was not cytotoxic at tested concentrations on human dermal fibroblasts moreover, it had proliferative activities. Hence, the EPS from Cronobacter sp. can be a good candidate for biotechnological application as a source of β-glucan with emulsifying and tissue regenerative properties.

60 APPLIED LIFE SCIENCES↗

The Effect of Acetylation on the Hydrolytic Degradation of PLA/Clay Nanocomposites

In this study, the hydrolytic degradation of Poly(lactic acid) (PLA) and acetylated PLA (PLA-Ac)–clay nanocomposites were investigated. The organo clay was obtained by ion exchange reaction using cetyl tri methyl ammonium bromide (CTAB). Nanocomposites containing 2, 5 and 8% mass ratio of organo clay (CTAB-O) were prepared. PLA and its organo clay nanocomposites were characterized by scanning electron microscope (SEM), thermo gravimetric analysis (TGA) and X-ray diffraction (XRD) to determine the morphology before and after hydrolytic degradation. Fourier transform infrared (FTIR) analyses of PLA and PLA-Ac were also obtained. The hydrolytic degradation of polymers and their composites were investigated in the phosphate buffered saline solution (PBS). The results showed that controlled hydrolytic degradation was observed in the samples with end group modification of PLA. While weight loss of PLA films was 28%, that of PLA-Ac films was 18% after 60 days degradation time. The weight loss was obtained as 29.5 and 25.5% for PLA-5 wt% organo clay (PLA/5CTAB-O) and PLA-Ac-5 wt% organo clay (PLA-Ac/5CTAB-O) nanocomposites films, respectively. It was also observed that thermal degradation of PLA-Ac was much more than that of PLA. Hydrolytic degradation increased depending on organo clay content. The end group modificated PLA results in controlled hydrolytic degradation. While hydrolytic degradation in polymer films occurred as surface erosion, bulk erosion was observed in composite films.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

A Novel Bio-based Polyaspartic Acid Copolymer: Synthesis, Structure and Performance of Degradation

A novel bio-based polyaspartic acid copolymer, as a multifunctional polymer was fabricated via in-site melting polymerization method using L-aspartic acid, γ-aminobutyric acid, L-phenylalanine and L-alanine as raw materials. The synthetic conditions were studied in detail, and the structure and degradation assays of these copolymers were investigated by FT-IR, XRD, weight loss rate, pH values, intrinsic viscosity and SEM. According to the results, all of the copolymers were found to have similar structure and excellent degradability. Additionally, the optimized copolymer C7 [L-aspartic acid (0.45 mol), γ-aminobutyric acid (0.35 mol), L-phenylalanine (0.05 mol) and L-alanine (0.15 mol)] exhibited the highest weight loss rate among all the copolymers. The weight loss rates on the 28th day in aqueous medium, phosphate buffered saline solution, 5.0 wt% trypsin solution and soil culture medium reached up to 44.74 wt%, 99.75 wt%, 90.67 wt% and 83.58 wt%, respectively. And the appropriate introduction of bio-based amino acids could control the degradation of polyaspartic acid distinctly. All of these results indicated that the bio-based polyaspartic acid copolymer could be used for reference as a good understanding of description the degradation of other environmentally friendly bio-based polymers.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Synthesis, Characterization, and Swelling Behaviors of Poly(acrylic acid-co-acrylamide)/Pozzolan Superabsorbent Polymers

This article introduces the design and optimization of a new eco-superabsorbent polymer (SAP) aiming to achieve maximum water absorption. In this study, the incorporation of the natural pozzolan (Poz) as an inorganic filler into a SAP was investigated for the first time. A new type of cross-linker, Bis[2-(methacryloyloxy)ethyl] phosphate, was used in the preparation of SAPs. The Taguchi optimization results revealed that factors’ level of significance on the water absorption are acrylamide (AAm) > acrylic acid (AA) > Poz. The optimum levels of factors that provide maximum water absorption are 30.8% AA, 30.8% AAm, and 38.4% of Poz in total weight. This high percentage of Poz in the optimized SAP is the highest ratio of an inorganic filler to a SAP ever mentioned in the literature. The water absorption capacities of the optimized polymer in ultrapure water and saline water were measured as 11,000 wt% and 2120 wt%, respectively. The overall assessment of FT-IR, XRD, TGA, SEM, and BET studies revealed the successful and homogeneous intercalation of Poz into poly(AA-co-AAm). This new eco-product with enhanced the water absorption capacity and thermal stability can be potentially used as soil conditioners in agricultural activities especially in arid regions.

36 MATERIALS SCIENCE↗