Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “observations model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,693 records · Page 94

Combination of searches for heavy resonances decaying into bosonic and leptonic final states using 36 fb - 1 of proton-proton collision data at s = 13 TeV with the ATLAS detector

Searches for new heavy resonances decaying into different pairings of W, Z, or Higgs bosons, as well as directly into leptons, are presented using a data sample corresponding to 36.1 fb -1 of pp collisions at $ \sqrt{s}=13 $ TeV collected during 2015 and 2016 with the ATLAS detector at the CERN Large Hadron Collider. Analyses selecting bosonic decay modes in the qqqq, ννqq, ℓνqq, ℓℓqq, ℓνℓν, ℓℓνν, ℓνℓℓ, ℓℓℓℓ, qqbb, ννbb, ℓνbb, and ℓℓbb final states are combined, searching for a narrow-width resonance. Likewise, analyses selecting the leptonic ℓν and ℓℓ final states are also combined. These two sets of analyses are then further combined. No significant deviation from the Standard Model predictions is observed. Three benchmark models are tested: a model predicting the existence of a new heavy scalar singlet, a simplified model predicting a heavy vector-boson triplet, and a bulk Randall-Sundrum model with a heavy spin-2 Kaluza-Klein excitation of the graviton. Cross section limits are set at the 95% confidence level using an asymptotic approximation and are compared with predictions for the benchmark models. These limits are also expressed in terms of constraints on couplings of the heavy vector-boson triplet to quarks, leptons, and the Higgs boson. The data exclude a heavy vector-boson triplet with mass below 5.5 TeV in a weakly coupled scenario and 4.5 TeV in a strongly coupled scenario, as well as a Kaluza-Klein graviton with mass below 2.3 TeV.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Evolution of Precipitation Particle Size Distributions within MC3E Systems and its Impact on Aerosol-Cloud-Precipitation Interactions: Final Report

This is a multi-institutional, collaborative project using observations and modeling to study the evolution (e.g. formation and growth) of hydrometeors in continental convective clouds. Our contribution was in data analysis for the generation of high-value cloud and precipitation products and derive cloud statistics for model validation. There are two areas in data analysis that we contributed: i) the development of novel, state-of-the-art dual-wavelength radar algorithms for the retrieval of cloud microphysical properties and ii) the evaluation of large domain, high-resolution models using comprehensive multi-sensor observations. Our research group developed statistical summaries from numerous sensors and developed retrievals of vertical air motion in deep convection.

54 ENVIRONMENTAL SCIENCES↗

Physical conditions in the solar corona during flarelike events

Soft X-ray images of the sun obtained with the S-056 telescope aboard Skylab are used to investigate physical conditions in the X-ray-emitting coronal plasma during flarelike events. Temporal and spatial variations in the density and temperature of the main X-ray source during a flare are determined along with the total radiative energy emitted by an observed loop system. Models for heat sources and energy balance are analyzed, radiative as well as conductive energy losses are computed, and an attempt is made to develop a self-consistent model of the observed X-ray event. It is concluded that: (1) loop tips constitute the source of the maximum X-ray flux; (2) conductive losses exceed radiative losses by several orders of magnitude; (3) energy (and possibly new matter) is added at loop tips; and (4) the most intense X-ray structures are located in areas where the magnetic field has a small radius of curvature and the axis of a loop sequence changes direction.

Vorpahl, J. A.↗

Kinetics of hydrogen-oxygen and methane-oxygen ignition sensitized by NO or NO2

In a study of methane ignition sensitized by NO2, the induction period chemical kinetics were examined by monitoring reactants and intermediates (CH4, NO2, OH, NO, CO, CO2, and H2O) prior to ignition. Data were obtained at pressure of 2-4 atm, temperatures of 1300-1900 K, equivalence ratios of 0.5-1.0, and NO2 up to 3.4 mole %. A tentative NO2 sensitization mechanism was deduced from the analysis of photometric observations and the comparison of computer modeling with observations.

Slack, M. W.↗

The chromosphere and transition region

The physical processes occurring as a result of the transfer of energy and momentum from the primary solar flare energy release site in the corona to the underlying chromosphere and transition region during the course of the flare are investigated through a comparison of theoretical models and observational data. Static, dynamic and hydrodynamic models of the lower-temperature chromospheric flare are reviewed. The roles of thermal conduction, radiation, fast particles and mass motion in chromosphere-corona interactions are analyzed on the basis of Skylab UV, EUV and X-ray data, and empirical and synthetic models of the chromospheric and upper photospheric responses to flares are developed. The canonical model of chromospheric heating during flares as a result of primary energy release elsewhere is found to be justified in the chromosphere as a whole, although not entirely as the temperature minimum, and a simplified model of horizontal chromospheric flare structure based on results obtained is presented.

Canfield, R. C.↗

The Evolution of Stratospheric Data Assimilation Systems

The use of model-assimilated meteorological observations for stratospheric research has become routine since the late 1980's. The first stratospheric assimilation systems were straightforward extensions of systems developed for tropospheric weather forecasting. During the 1990's systems were developed that more directly addressed the specifics of stratospheric applications. These developments include better treatment of the satellite observations and improved models that better represent the residual circulation in the assimilated data sets. This talk will review the evolution of stratospheric data assimilation and its application, especially to problems of tracer transport. The new data assimilation currently under validation at NASA will be described in some detail, and results from the validation exercise will be presented. This data assimilation system sits at the foundation of a proposed stratospheric reanalysis that covers the era of the Upper Atmosphere Research Satellite (UARS).

Rood, Richard B.↗

An Overview of Atmospheric Composition OSSE Activities at NASA's Global Modeling and Assimilation Office

A model-based Observing System Simulation Experiment (OSSE) is a framework for numerical experimentation in which observables are simulated from fields generated by an earth system model, including a parameterized description of observational error characteristics. Simulated observations can be used for sampling studies, quantifying errors in analysis or retrieval algorithms, and ultimately being a planning tool for designing new observing missions. While this framework has traditionally been used to assess the impact of observations on numerical weather prediction, it has a much broader applicability, in particular to aerosols and chemical constituents. In this talk we will give a general overview of Observing System Simulation Experiments (OSSE) activities at NASA's Global Modeling and Assimilation Office, with focus on its emerging atmospheric composition component.

daSilva, Arlinda↗

Exploring Climatology and Long-Term Variations of Aerosols from NASA Reanalysis MERRA-2 with Giovanni

Dust plays important roles in energy cycle and climate variations. The dust deposition is the major source of iron in the open ocean, which is an essential micronutrient for phytoplankton growth and therefore may influence the ocean uptake of atmospheric CO2. Mineral dust can also act as fertilizer for forests over long time periods. Over 35 years of simulated global aerosol products from NASA atmospheric reanalysis, second Modern-Era Retrospective analysis for Research and Applications (MERRA-2) are available from NASA Goddard Earth Science Data and Information Services Center (GES DISC). The MERRA-2 covers the period 1980-present, continuing as an ongoing climate analysis. Aerosol assimilation is included throughout the period, using MODIS, MISR, AERONET, and AVHRR (in the pre-EOS period). The aerosols are assimilated by using MERRA-2 aerosol model, which interact directly with the radiation parameterization, and radiatively coupled with atmospheric model dynamics in the Goddard Earth Observing System Model, Version 5 (GEOS-5). Dust deposition data along with other major aerosol compositions (e.g. black carbon, sea salt, and sulfate, etc.) are simulated as dry and wet deposition, respectively. The hourly and monthly data are available at spatial resolution of 0.5ox0.625o (latitude x longitude). Quick data exploration of climatology and interannual variations of MERRA-2 aerosol can be done through the online visualization and analysis tool, Giovanni. This presentation, using dust deposition as an example, demonstrates a number of MERRA-2 data services at GES DISC. Global distributions of dust depositions, and their seasonal and inter-annual variations are investigated from MERRA-2 monthly aerosol products.

data services↗

Synergistic and Collaborative Development Strategies for FV3 Powered Next Generation Unified Global Modeling System

The GFDL (Geophysical Fluid Dynamics Laboratory, NOAA - National Oceanic and Atmospheric Administration) Finite-­Volume Cubed-Sphere Dynamical Core (FV3) is a scalable and flexible dynamical core capable of both hydrostatic and non-hydrostatic atmospheric simulations. FV3 has been chosen as the dynamical core for the Next Generation Global Prediction System project (NGGPS), designed to upgrade the current NCEP (National Centers for Environmental Prediction, NOAA) operational Global Forecast System (GFS) to run as a unified, fully-coupled system in NOAA's Environmental Modeling System infrastructure. FV3 dynamic core has a long history of serving as the main engine for global atmospheric models at various Government and Academic Research Laboratories including NOAA: GFDL Climate Modeling Suite (AM4 (Atmosphere Modeling 4), CM4 (Climate Model 4) ESM4 (Earth System Model 4), Hiram (HIgh Resolution Atmospheric Model)); NASA: GMAO (Global Modeling and Assimilation Office) Goddard Earth Observing System Model (GEOS); and NCAR (National Center for Atmospheric Research) Community Earth System Model (CESM). The three primary stakeholders in FV3 (GFDL, GMAO, EMC (Environmental Modeling Center - NOAA)) have embarked on synergistic and collaborative strategies with focus on the advancement of non-hydrostratic dynamic core, physics, chemistry, and data assimilation efforts, leveraging collective strengths of each of the partnering agencies. This talk presents the ongoing plans for model advancements at GFDL, GMAO and EMC, with special emphasis on contributions towards developing community based unified global modeling system for operational and research applications at respective organizations. Future plans include extending the collaborations to the development of earth system components including GMAO's aerosol chemistry models (GOCART/MAM (Goddard Chemistry Aerosol Radiation and Transport / Modal Aerosol Model)), Land Information System (LIS), and advanced data assimilation techniques; and GFDL's Modular Ocean Model (MOM) and Sea Ice Simulator (SIS) for transition to operations at NCEP.

Putman, William↗

Evaluating Cloud Feedback Components in Observations and Their Representation in Climate Models

This study quantifies the contribution of individual cloud feedbacks to the total short-term cloud feedback in satellite observations over the period 2002–2014 and evaluates how they are represented in climate models. The observed positive total cloud feedback is primarily due to positive high-cloud altitude, extratropical high- and low-cloud optical depth, and land cloud amount feedbacks partially offset by negative tropical marine low-cloud feedback. Seventeen models from the Atmosphere Model Intercomparison Project of the sixth Coupled Model Intercomparison Project are analyzed. The models generally reproduce the observed moderate positive short-term cloud feedback. However, compared to satellite estimates, the models are systematically high-biased in tropical marine low-cloud and land cloud amount feedbacks and systematically low-biased in high-cloud altitude and extratropical high- and low-cloud optical depth feedbacks. Errors in modeled short-term cloud feedback components identified in this analysis highlight the need for improvements in model simulations of the response of high clouds and tropical marine low clouds. Our results suggest that skill in simulating interannual cloud feedback components may not indicate skill in simulating long-term cloud feedback components.

58 GEOSCIENCES↗

Wintertime nitric acid chemistry - Implications from three-dimensional model calculations

A three-dimensional simulation of the evolution of HNO3 has been run for the winter of 1979. Winds and temperatures are taken from a stratospheric data assimilation analysis, and the chemistry is based on Limb Infrared Monitor of the Stratosphere (LIMS) observations. The model is compared to LIMS observations to investigate the problem of 'missing' nitric acid chemistry in the winter hemisphere. Both the model and observations support the contention that a nitric acid source is needed outside of the polar vortex and north of the subtropics. Observations suggest that HNO3 is not dynamically controlled in middle latitudes. The model shows that given the time scales of conventional chemistry, dynamical control is expected. Therefore, an error exists in the conventional chemistry or additional processes are needed to bring the model and data into agreement. Since the polar vortex is dynamically isolated from the middle latitudes, and since the highest HNO3 values are observed in October and November, a source associated solely with polar stratospheric clouds cannot explain the deficiencies in the chemistry. The role of heterogeneous processes on background aerosols is reviewed in light of these results.

Rood, Richard B.↗

GROWTH OF MASSIVE BLACK HOLES AT THEIR LATE STAGE

It is believed that the growth of local massive black holes was dominated by accretion during quasar phases, while a fraction of the local black hole mass was accumulated through accreting gases at very low rates. We derive the black hole mass density as a function of redshift with the bolometric luminosity function of active galactic nuclei (AGNs) assuming that massive black holes grew via accreting the circumnuclear gases, in which the derived black hole mass density is required to match the measured local black hole mass density at z = 0. Advection-dominated accretion flows (ADAFs) are supposed to be present in low-luminosity AGNs/normal galaxies, which are very hot and radiate mostly in the hard X-ray band. Most of the X-ray background (XRB) is contributed by bright AGNs, and a variety of AGN population synthesis models were developed to model the observed XRB in the last two decades. Based on our derived black hole mass density, we calculate the contribution to the XRB from the ADAFs in faint AGNs/normal galaxies with a given Eddington ratio distribution, which is mostly in the hard X-ray energy band with an energy peak at {approx}200 keV. The growth of massive black holes during the ADAF phase can therefore be constrained with the observed XRB. Combining an AGN population synthesis model with our results, we find that the fitting on the observed XRB, especially at the hard X-ray energy band with {approx_gt}100 keV, is improved provided the contribution of the ADAFs in low-luminosity AGNs/normal galaxies is properly included. It is found that less than {approx}15% of local massive black hole mass density was accreted during ADAF phases. We suggest that more accurate measurements of the XRB in the energy band with {approx_gt}100 keV in the future may help constrain the growth of massive black holes at their late stage. We also calculate their contribution to the extragalactic {gamma}-ray background (EGRB), and find that less than {approx}1% of the observed EGRB is contributed by the ADAFs in these faint sources.

79 ASTRONOMY AND ASTROPHYSICS↗

Impact of Spaceflight on Earth’s Atmosphere: Climate, Ozone, and the Upper Atmosphere

In order to eliminate potential risk from the lack of scientific understanding and resolve the current inability to assess how a rapidly growing space industry will affect Earth’s atmosphere, a well-defined research effort is recommended. As demonstrated in the white paper “Impacts of Spaceflight on the Global Atmosphere: Current Understanding, Knowledge Gaps, NASA’s Role, and Roadmap", we must improve our ability to model and observe rocket engine combustion, far field rocket plume evolution, impacts on the upper atmosphere, global launch impacts, reentry gas and aerosol production, far field reentry plume evolution, and global reentry impacts. The highly successful Atmospheric Chemistry of Combustion Emissions Near the Tropopause (ACCENT) program serves as a model for the proposed effort. ACCENT was a multiagency research program that included observation and modeling of rocket plumes and played a critical role to remove the threat of regulatory action against the Space Shuttle’s solid rocket motors. A similar effort today would be a combination of remote, in situ, and laboratory measurements that feed into model development and assessment of future launch and reentry emissions.

Ozone Layer↗

Dependence of Convective Cloud Microphysical Properties on Environmental Conditions during the TRACER and ESCAPE Field Campaigns: A Synergistic Approach of Observations, Machine Learning and Parcel Models

The sensitivity of convective clouds to aerosols and their interactions with environment, combined with limited observational constraints in parameterizations, introduces significant uncertainties in atmospheric models. Here, this study investigates the dependence of convective cloud microphysical properties on environmental conditions using a synergistic approach that combines unique observations from the TRACER and ESCAPE field campaigns, machine learning techniques, and parcel model simulations with a super-droplet microphysics scheme. A random forest algorithm identifies in-situ vertical velocity (w), temperature (T), and surface fine-mode aerosol mass concentration as the three most important environmental conditions influencing cloud properties including liquid water content (LWC), number concentration for particles with D max < 50 μm (N c ,<50), 50 μm ≤ D max ≤ 3000 μm (N c,50–3000 ), and droplet effective diameter (D e ). Results show that LWC, N c,<50 , and N c,50–3000 significantly increase with w in updrafts. Across w bins, as T decreases, LWC, D e , and N c,50–3000 increase, while N c,<50 decreases, which are closely linked to the distance above cloud bases. Warmer cloud bases yield higher LWC, greater N c,50–3000 , and smaller N c,<50 , while polluted environments produce greater N c,<50 . Parcel model simulations successfully replicate these observed dependencies. The simulation results indicate that warmer cloud bases enhance condensation generating larger droplets, and differences in droplet sizes are then amplified through collision-coalescence, resulting in a greater N c,50–3000 . Polluted conditions result in a greater N c,<50 primarily due to enhanced cloud condensation nuclei activation despite increased collision-coalescence rates compared to pristine conditions. This study provides observed quantitative patterns characterizing cloud microphysical properties as a function of key environmental parameters, offering valuable constraints for improving physics parameterizations and numerical models.

54 ENVIRONMENTAL SCIENCES↗

Assimilation of Satellite-Derived Skin Temperature Observations into Land Surface Models

Land surface (or "skin") temperature (LST) lies at the heart of the surface energy balance and is a key variable in weather and climate models. Here we assimilate LST retrievals from the International Satellite Cloud Climatology Project (ISCCP) into the Noah and Catchment (CLSM) land surface models using an ensemble-based, off-line land data assimilation system. LST is described very differently in the two models. A priori scaling and dynamic bias estimation approaches are applied because satellite and model LST typically exhibit different mean values and variability. Performance is measured against 27 months of in situ measurements from the Coordinated Energy and Water Cycle Observations Project at 48 stations. LST estimates from Noah and CLSM without data assimilation ("open loop") are comparable to each other and superior to that of ISCCP retrievals. For LST, RMSE values are 4.9 K (CLSM), 5.6 K (Noah), and 7.6 K (ISCCP), and anomaly correlation coefficients (R) are 0.62 (CLSM), 0.61 (Noah), and 0.52 (ISCCP). Assimilation of ISCCP retrievals provides modest yet statistically significant improvements (over open loop) of up to 0.7 K in RMSE and 0.05 in anomaly R. The skill of surface turbulent flux estimates from the assimilation integrations is essentially identical to the corresponding open loop skill. Noah assimilation estimates of ground heat flux, however, can be significantly worse than open loop estimates. Provided the assimilation system is properly adapted to each land model, the benefits from the assimilation of LST retrievals are comparable for both models.

Reichle, Rolf H.↗

The use of a simplified isentropic model for short-term aviation forecasting

A simple, multiple-layer, isentropic potential vorticity forecast model is described for predicting short-term atmospheric changes between 12-hourly radiosonde observations. The model and the model initialization technique are described, and a case study with both convection and strong horizontal wind shear is discussed. The wind and stream function field forecasts and the forecast areas of convective instability are constrasted with observational results to assess the model's strengths and weaknesses. Excellent agreement is obtained between model predictions and observations.

Homan, J. H.↗

Models, In situ, and Remote sensing of Aerosols (MIRA): Formation of an International Working Group

There is a natural partitioning of scientific interest amongst three specialties of aerosol research: modeling, in situ measurements, and remote sensing. The community sees enhanced measurement capabilities when these groups interact, and this strengthens the overall scientific impact on climate and air quality. The Models, In situ, and Remote sensing of Aerosols (MIRA) working group connects members of the different aerosol communities through collaborative projects. What is MIRA? MIRA is forum that fosters international collaborations amongst the aerosol specialties. MIRA is also a collection of interdisciplinary projects with clear goals that are pursued by small working groups. Finally, MIRA projects are generally characterized by requests for additional scientific data (both observational and modeled). Why? The purpose of MIRA is to contextualize both observations and model results through the encouragement of holistic projects and collaborations. How does MIRA differ from other projects? MIRA focuses on interdisciplinarity to improve measurements and their utility, so MIRA complements the activities of other groups. For example, ensemble model runs of AeroCom could be used in a MIRA project with greater robustness than a similar effort that uses single-model analyses. We first present a description of MIRA and how your project can become a part of the MIRA community. This is followed by brief descriptions of some of the current MIRA projects, which include the Mapping of Aerosol lidar ratios for CALIPSO (MAC), the Tables of Aerosol Optics (TAO), and the Harmonization of aerosol Assimilation Models and Retrievals (HAMR). Finally, we discuss the immediate science goals and organization of MIRA.

Gregory Schuster↗

A Comparison of Simulated Cloud Radar Output from the Multiscale Modeling Framework Global Climate Model with CloudSat Cloud Radar Observations

Over the last few years a new type of global climate model (GCM) has emerged in which a cloud-resolving model is embedded into each grid cell of a GCM. This new approach is frequently called a multiscale modeling framework (MMF) or superparameterization. In this article we present a comparison of MMF output with radar observations from the NASA CloudSat mission, which uses a near-nadir-pointing millimeter-wavelength radar to probe the vertical structure of clouds and precipitation. We account for radar detection limits by simulating the 94 GHz radar reflectivity that CloudSat would observe from the high-resolution cloud-resolving model output produced by the MMF. Overall, the MMF does a good job of reproducing the broad pattern of tropical convergence zones, subtropical belts, and midlatitude storm tracks, as well as their changes in position with the annual solar cycle. Nonetheless, the comparison also reveals a number of model shortfalls including (1) excessive hydrometeor coverage at all altitudes over many convectively active regions, (2) a lack of low-level hydrometeors over all subtropical oceanic basins, (3) excessive low-level hydrometeor coverage (principally precipitating hydrometeors) in the midlatitude storm tracks of both hemispheres during the summer season (in each hemisphere), and (4) a thin band of low-level hydrometeors in the Southern Hemisphere of the central (and at times eastern and western) Pacific in the MMF, which is not observed by CloudSat. This band resembles a second much weaker ITCZ but is restricted to low levels.

54 ENVIRONMENTAL SCIENCES↗