Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “mathematical model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,693 records · Page 94

Selective detection of polarisation components of a coherent population trapping signal in hot alkali metal atoms

A mathematical model of the interaction of bichromatic laser radiation with alkali metal atoms in an optically dense gas cell at above room temperature is constructed. Within the framework of the model, complete hyperfine and Zeeman structures of alkali metal atom levels are considered, which allows the propagation of radiation polarisation along the cell and the effect of a constant magnetic field to be correctly taken into account. It is found that the selective detection of polarisation radiation components carries additional information in comparison with a signal of total intensity. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Post-treatment control of HIV infection

Antiretroviral therapy (ART) for HIV is not a cure. However, recent studies suggest that ART, initiated early during primary infection, may induce post-treatment control (PTC) of HIV infection with HIV RNA maintained at <50 copies per mL. We investigate the hypothesis that ART initiated early during primary infection permits PTC by limiting the size of the latent reservoir, which, if small enough at treatment termination, may allow the adaptive immune response to prevent viral rebound (VR) and control infection. We use a mathematical model of within host HIV dynamics to capture interactions among target cells, productively infected cells, latently infected cells, virus, and cytotoxic T lymphocytes (CTLs). Analysis of our model reveals a range in CTL response strengths where a patient may show either VR or PTC, depending on the size of the latent reservoir at treatment termination. Below this range, patients will always rebound, whereas above this range, patients are predicted to behave like elite controllers. As a result, using data on latent reservoir sizes in patients treated during primary infection, we also predict population-level VR times for non-controllers consistent with observations.

59 BASIC BIOLOGICAL SCIENCES↗

Phenotype heterogeneity in cancer cell populations

Phenotype heterogeneity in cancer cell populations, be it of genetic, epigenetic or stochastic origin, has been identified as a main source of resistance to drug treatments and a major source of therapeutic failures in cancers. The molecular mechanisms of drug resistance are partly understood at the single cell level (e.g., overexpression of ABC transporters or of detoxication enzymes), but poorly predictable in tumours, where they are hypothesised to rely on heterogeneity at the cell population scale, which is thus the right level to describe cancer growth and optimise its control by therapeutic strategies in the clinic. We review a few results from the biological literature on the subject, and from mathematical models that have been published to predict and control evolution towards drug resistance in cancer cell populations. We propose, based on the latter, optimisation strategies of combined treatments to limit emergence of drug resistance to cytotoxic drugs in cancer cell populations, in the monoclonal situation, which limited as it is still retains consistent features of cell population heterogeneity. The polyclonal situation, that may be understood as “bet hedging” of the tumour, thus protecting itself from different sources of drug insults, may lie beyond such strategies and will need further developments. In the monoclonal situation, we have designed an optimised therapeutic strategy relying on a scheduled combination of cytotoxic and cytostatic treatments that can be adapted to different situations of cancer treatments. Finally, we review arguments for biological theoretical frameworks proposed at different time and development scales, the so-called atavistic model (diachronic view relying on Darwinian genotype selection in the coursof billions of years) and the Waddington-like epigenetic landscape endowed with evolutionary quasi-potential (synchronic view relying on Lamarckian phenotype instruction of a given genome by reversible mechanisms), to represent evolution towards heterogeneity, possibly polyclonal, in cancer cell populations and propose innovative directions for therapeutic strategies based on such frameworks.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Scalable synthesis of supported catalysts using fluidized bed atomic layer deposition

Overcoating layers deposited on the surface of heterogeneous catalysts using atomic layer deposition (ALD) have been shown to increase catalyst activity, lifetime, and selectivity. In this study, we performed Al 2 O 3 ALD and Pd ALD in a commercial fluidized bed reactor on high surface area mesoporous powder supports to create overcoated catalysts with high precursor utilization. We investigated the reaction mechanism for both Al 2 O 3 ALD and Pd ALD using in situ mass spectrometry and developed a mathematical model to understand the precursor saturation behaviors. We characterized the catalyst samples using a variety of techniques to measure the surface area, porosity, composition, and surface chemistry of the overcoated catalysts. Finally, we used propane dehydrogenation as a probe reaction to evaluate the performance of the catalysts prepared by fluidized bed ALD.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

NUCLEAR WASTE VITRIFICATION EFFICIENCY COLD CAP REACTIONS

The cost and schedule of nuclear waste treatment and immobilization are greatly affected by the rate of glass production. Various factors influence the performance of a waste-glass melter. One of the most significant, and also one of the least understood, is the process of batch melting. Studies are being conducted to gain fundamental understanding of the batch reactions, particularly those that influence the rate of melting, and models are being developed to link batch makeup and melter operation to the melting rate. Batch melting takes place within the cold cap, i.e., a batch layer floating on the surface of molten glass. The conversion of batch to glass consists of various chemical reactions, phase transitions, and diffusion-controlled processes. These include water evaporation (slurry feed contains as high as 60% water), gas evolution, the melting of salts, the formation of borate melt, reactions of borate melt with molten salts and with amorphous oxides (Fe{sub 2}O{sub 3} and Al{sub 2}O{sub 3}), the formation of intermediate crystalline phases, the formation of a continuous glass-forming melt, the growth and collapse of primary foam, and the dissolution of residual solids. To this list we also need to add the formation of secondary foam that originates from molten glass but accumulates on the bottom of the cold cap. This study presents relevant data obtained for a high-level-waste melter feed and introduces a one-dimensional (1D) mathematical model of the cold cap as a step toward an advanced three-dimensional (3D) version for a complete model of the waste glass melter. The 1D model describes the batch-to-glass conversion within the cold cap as it progresses in a vertical direction. With constitutive equations and key parameters based on measured data, and simplified boundary conditions on the cold-cap interfaces with the glass melt and the plenum space of the melter, the model provides sensitivity analysis of the response of the cold cap to the batch makeup and melter conditions. The model demonstrates that batch foaming has a decisive influence on the rate of melting. Understanding the dynamics of the foam layer at the bottom of the cold cap and the heat transfer through it appears crucial for a reliable prediction of the rate of melting as a function of the melter-feed makeup and melter operation parameters. Although the study is focused on a batch for waste vitrification, the authors expect that the outcome will also be relevant for commercial glass melting.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Reinvestigation of the charge density distribution in arc discharge fusion system

A continual arc discharge system has been setup and the light intensity of arc discharge has been profiled. The mathematical model of local energy density distribution in arc discharge fusion has been simulated which is in good qualitative agreement with light intensity profile of arc discharge in the experiments. Eventually, the local energy density distribution of arc discharge system is able to be precisely manipulated to act as heat source in the fabrication of fused fiber devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Experimental and Theoretical Research into Dynamic Loading of Tungsten Porous Alloy with Reinforcing Agent

The paper studies the behavior of ceramic porous tungsten alloy with reinforcing agents under the shock-wave loading conditions. Penetrating capacity of tungsten kinetic energy projectiles is calculated and experimentally investigated during their high-speed impacts on steel plates. It is shown that the increased penetration depth of tungsten projectiles exceeds that of the prototype with relevant weight and size, made of tungsten-nickel-iron cast alloy. A mathematical model is developed together with the design technique of the behavior of tungstennickel-iron-cobalt metal foams alloyed with boron carbide, tungsten titanium carbide and tungsten carbide during the high-speed impact interaction. The composite ceramic material is described here as a porous medium. The matrix of this medium is a homogeneous two-phase mixture of the tungsten-nickel-iron-cobalt system and reinforcing agents added in the required proportions.

36 MATERIALS SCIENCE↗

Effects of Ultramicroelectrode Dimensions on the Electropolymerization of Polypyrrole

Anode geometry can significantly affect the electrochemical synthesis of conductive polymers. Here, the effects of anode dimensions on the electropolymerization of pyrrole are investigated. Band microelectrodes were prepared with widths ranging from 2 to 500 {micro}m. The anode dimension has a significant effect on the resulting thickness of polymer film. The electropolymerization process deviates significantly from that predicted by simple mass transfer considerations when electrode dimensions are less than {approx}20 {micro}m. Polymer film thickness is thinner than expected when electrode dimensions become less than {approx}10 {micro}m. A simple mathematical model was derived to explain the observed effects of anode dimensions on the polymerization process. Simulation results confirm that diffusive loss of reaction intermediates accounts for the observed experimental trends. The described simulation facilitates understanding of the electropolymerization processes and approaches to the controlled deposition of polypyrrole, particularly at the submicron scale, for microelectromechanical systems and biomedical applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Heat and Mass Transfer in Cesium Evaporation from Graphite Surface in Argon

The aim of the present work is mathematical modeling of the heat and mass transfer of {sup 137}Cs under the action of low-temperature equilibrium plasma flow on sections of graphite contaminated by radionuclides. The methods of investigation are calculation of the temperature and mass rate of evaporation of radiocesium by solving a system of quasi-homogeneous nonstationary heat conduction equations with boundary conditions of the first and third kind, which take account of mass transfer, by means of finite-difference elements using the ANSYS package.

42 ENGINEERING↗

Numerical simulation of emulsified fuel spray combustion with puffing and micro-explosion

The purpose of this study was to develop numerical simulation of spray combustion of emulsified fuel with considering puffing and micro-explosion. First, a mathematical model for puffing was proposed. In the proposed puffing model, the rate of mass change of a droplet during puffing was expressed by the evaporation rate of dispersed water and the mass change rate due to fine droplets spouted from the droplet surface. The mass change rate due to fine droplets was related to the evaporation rate of the dispersed water and each liquid content. This model had only one experimental parameter. The essential feature of this model was that it was simple to apply to numerical simulation of spray combustion. First, the validity of the proposed puffing model was investigated with the experimental results for a single droplet. The calculated results for a single droplet with the experimental parameter varying from 5.0 to 10 were in good agreement with the experimental results. Moreover, numerical simulation of spray combustion of emulsified fuel was carried out. The occurrence of puffing and micro-explosion was determined by the inner droplet temperature. When micro-explosion occurred, a droplet changed to vapor rapidly. When the proposed puffing model was used in numerical simulation of spray combustion, the experimental parameter in the puffing model was determined for each droplet by random numbers within the range 5.0-10. The calculated results of spray combustion of emulsified fuel without considering puffing or micro-explosions were different from the experimental results even where combustion reactions were almost terminated. Meanwhile, the calculated results when considering puffing and micro-explosions were in good agreement with experimental results at the same location. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Investigation of the effect of noise parameters of a 3D lidar on the error in estimating relief signatures of distant objects from 2D field intensity distributions of reflected radiation

We consider the influence of noise parameters of a 3D lidar and external background radiation on the error in estimating the relief signatures of distant objects from 2D field intensity distributions of the reflected radiation. A physical and mathematical model is developed to analyse the effect of noise. The dependence of the error in estimating the relief signatures at various signal-to-noise ratios is investigated taking into account the parameters of real multi-element photodetectors (MEPDs). The obtained results indicate the possibility of evaluating relief signatures of distant objects with high accuracy based on standard MEPDs simultaneously for a large number of points on the object’s surface with a signal-to-noise ratio of more than 4. (paper)

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Calcium Isotope Geochemistry: Research Horizons and Nanoscale Fractionation Processes

Interest in studies of calcium isotope variations in nature continues to increase. Investigations span human biology, plants and soils, oceanography and paleoclimate, early solar system processes, aqueous geochemistry, and silicate liquid structure. Variations in the 44Ca/40Ca ratio are generally small, about 5 {per_thousand}, but gradual small improvements in analytical capability now yield 0.05 to 0.1 {per_thousand} resolution. The field is still plagued by a lack of universal standards for isotope ratios and data representation, but these are secondary issues. Traditional isotopic systems have been based in equilibrium thermodynamics, which can explain the magnitude and sign of observed mass-dependent fractionation behavior. For Ca isotopes this is not the case. There is still no reliable way to estimate the equilibrium free energy associated with isotopic exchange between most phases of interest. Experiments are difficult to interpret because it is almost impossible to precipitate minerals from aqueous solution at equilibrium at low temperature. Some studies suggest that, for example, there is no equilibrium isotopic fractionation between calcite and dissolved aqueous Ca. There is good evidence that most Ca isotopic fractionation is caused by kinetic effects. The details of the controlling processes are still missing, and without this mechanistic understanding it is difficult to fully understand the implications of natural isotopic variations. Recent work on dissolved Ca, calcite, and sulfates in both laboratory and natural settings is shedding light on where the fractionation may arise. There is emerging evidence for mass dependent fractionation associated with aqueous diffusion, but probably the primary source of the effects is in the details of precipitation of minerals from solution. This makes the fractionation potentially dependent on a number of factors, including solution composition and mineral growth rate. The next challenge is to develop appropriate experimental tests and combine them with micro- and nano-scale characterization, and to capture the critical processes in mathematical models. Some of the largest fractionation effects have been observed for silicate liquids, where both chemical and thermal diffusion generate large isotopic variations. Intake and transport of Ca in plants is also associated with substantial fractionation. Continuing work is beginning to place the fractionation into the context of global Ca cycles.

58 GEOSCIENCES↗

Novel Sorption Enhanced Reaction Process for Simultaneous Production of CO 2 and H 2 from Synthesis Gas Produced by Coal Gasification

The goal of this project is to evaluate the extensive feasibility of a novel concept called Thermal Swing Sorption Enhanced Reaction (TSSER) process to simultaneously produce H 2 and CO 2 as a single unit operation in a sorber-reactor. The successful demonstration of the potential feasibility of the TSSER concept implies that it is worth pursuing further development of the idea. This can be done by more extensive evaluation of the basic sorptive properties of the CO 2 chemisorbents at realistic high pressures and by continuing the experimental and theoretical study of the TSSER process. This will allow us to substantiate the assumptions made during the preliminary design and evaluation of the process and firm up the initial conclusions. The task performed under this project consists of (i) retrofitting an existing single column sorption apparatus for measurement of high pressure CO 2 sorption characteristics, (ii) measurement of high pressure CO 2 chemisorption equilibria, kinetics and sorption-desorption column dynamic characteristics under the conditions of thermal swing operation of the TSSER process, (iii) experimental evaluation of the individual steps of the TSSER process (iv) development of extended mathematical model for simulating cyclic continuous operation of TSSER to aid in process scale-up and for guiding future work, (v) simulate and test SER concept using realistic syngas composition, (vi) extensive demonstration of the thermal stability of sorbents using a TGA apparatus, (vii) investigation of the surfaces of the adsorbents and adsorbed CO 2 ,and (viii) test the effects of sulfur compounds found in syngas on the CO 2 sorbents.

01 COAL, LIGNITE, AND PEAT↗

Position and Velocity Tracking in Cellular Networks Using the Kalman Filter

Access to the right information anytime, anywhere is becoming the new driving force for the information technology revolution. The 'right' information's relevance is based on the user's profile and his/her current geographical position and/or time. Location Based Service (LBS) is an innovative technology that provides information or makes information available based on the geographical location of the mobile user. Analysts predict that LBSs will lead to new applications, generating billions of US dollars worldwide (Leite, 2001; Searle, 2001). The need for an efficient and accurate mobile station (MS) positioning system is growing day by day. The ability to pinpoint the location of an individual has an obvious and vital value in the context of emergency services (Chan, 2003; Olama et al., 2008). Pinpointing the location of people and other valuable assets also opens the door to a new world of previously unimagined information services and m-commerce probabilities. For example, availability of services like 'Where is the nearest ATM?', 'Check traffic conditions on the highway on my route', 'Find a parking lot nearby', as well as answers to 'Where is my advisor?', and 'Where is my car?' will be an everyday rule in our lives (Charalambous & Panayiotou, 2004). A technology independent LBS architecture can be considered as comprised by three main parts (Girodon, 2002): A user requesting information, a mobile network operator and its partners, and several content providers (e.g. data, maps). The subscriber requests a personalized service dependant on his geographic location. The system will ask the Location Services Manager (which is in charge of handling requests, i.e., send/receive to the Location Calculator and the Content Providers) to pinpoint the location of the mobile. The Location Services Manager (LSM), using the Location Calculator, will ask the Content Provider (CP) to supply qualified information according to the mobile's geographical position. The LSM will eventually receive the answer from the CP and send it to the mobile, performing the essential data translations. Fig. 1 outlines the precedent concept. For effective provision of LBS, one has to provide an accurate location, as well as suitable information for users required by the corresponding service, with minimal expenditure. Thus, there are three main technology issues that have to be resolved for LBS: positioning technology, application technology, and location services (Dru & Saada, 2001). A very important technology is of course the positioning technology, the way to find out the location of a mobile device accurately. Due to the unique characteristics of the cellular environment, it is a great challenge to locate the user precisely. However, in many cases, application technology and location services are important consideration of LBS. Application technology manages the geographic information and delivers the customer requests to the appropriate service provider, thus it constitutes the communication system involved. LBS uses the geographic information to provide geographically sensitive information and services. Location-based applications and services are not sensitive to the type of location technology that is used - they merely rely on reasonably accurate geographic coordinates (Chan, 2003). This chapter is structured as follows: In Section 2, we describe the use and applications of LBSs. The current location determination technologies and standards are presented in Section 3. In Section 4 we describe the mathematical models used for the location and velocity estimation algorithms. An initial attempt for MS location estimation via received signal level using the maximum likelihood estimation (MLE) approach and triangulation is presented in Sections 5. Since the former approach lacks acceptable accuracy for demanding services as numerical results reveal, the extended Kalman filter (EKF) approach, which is the main topic in this chapter, is introduced in Sections 6. In Section 7 we present numerical results. Section 8 provides concluding remarks.

99 GENERAL AND MISCELLANEOUS↗

Automatic computation for optimum height planning of apartment buildings to improve solar access

The objective of this study is to suggest a mathematical model and an optimal algorithm for determining the height of apartment buildings to satisfy the solar rights of survey buildings or survey housing units. The objective is also to develop an automatic computation model for the optimum height of apartment buildings and then to clarify the performance and expected effects. To accomplish the objective of this study, the following procedures were followed: (1) The necessity of the height planning of obstruction buildings to satisfy the solar rights of survey buildings or survey housing units is demonstrated by analyzing through a literature review the recent trend of disputes related to solar rights and to examining the social requirements in terms of solar rights. In addition, the necessity of the automatic computation system for height planning of apartment buildings is demonstrated and a suitable analysis method for this system is chosen by investigating the characteristics of analysis methods for solar rights assessment. (2) A case study on the process of height planning of apartment buildings will be briefly described and the problems occurring in this process will then be examined carefully. (3) To develop an automatic computation model for height planning of apartment buildings, geometrical elements forming apartment buildings are defined by analyzing the geometrical characteristics of apartment buildings. In addition, design factors and regulations required in height planning of apartment buildings are investigated. Based on this knowledge, the methodology and mathematical algorithm to adjust the height of apartment buildings by automatic computation are suggested and probable problems and the ways to resolve these problems are discussed. Finally, the methodology and algorithm for the optimization are suggested. (4) Based on the suggested methodology and mathematical algorithm, the automatic computation model for optimum height of apartment buildings is developed and the developed system is verified through the application of some cases. The effects of the suggested model are then demonstrated quantitatively and qualitatively. (author)

14 SOLAR ENERGY↗

Gate Control Coefficient Effect on CNFET Characteristic

The development of carbon nanotube field-effect transistor (CNFET) as alternative to existing transistor technology has long been published and discussed. The emergence of this device offers new material and structure in building a transistor. This paper intends to do an analysis of gate control coefficient effect on CNFET performance. The analysis is based on simulation study of current-voltage (I-V) characteristic of ballistic CNFET. The simulation study used the MOSFET-like CNFET mathematical model to establish the device output characteristic. Based on the analysis of simulation result, it is found that the gate control coefficient contributes to a significant effect on the performance of CNFET. The result also shown the parameter could help to improve the device performance in terms of its output and response as well. Nevertheless, the characteristic of the carbon nanotube that acts as the channel is totally important in determining the performance of the transistor as a whole.

36 MATERIALS SCIENCE↗

Photon and Neutron Fluence-to-Dose Conversion Factors for External Radiation: A Comparison of the New ICRP DCFs with those Currently in Use at LANL - Paper 10

There is a set of quantities obtained from ICRP 74 (ex., effective dose, personal dose equivalent) used at the Los Alamos National Laboratory in assessing radiation generating facilities. An assessment typically is done either by measurements of a radiation field or calculations using radiation transport codes. Both measured and calculated values are related to basic physical quantities like particle fluence and absorbed dose. Radiological quantities that cannot be measured directly can be derived from physical measurements. The International Commission on Radiological Protection (ICRP) using radiation transport codes, appropriate mathematical models of a human body and different irradiation geometries, developed a set of dose conversion factors (DCFs) from measurable physical quantities. In this paper a review and comparison are made with the new DCFs proposed by ICRP in Publication 116 to those listed in Publications 74 which are currently used by the Los Alamos National Laboratory. (authors)

61 RADIATION PROTECTION AND DOSIMETRY↗

Investigation on the Fluid Flow and Decarburization Process in the RH Process

In the current study, mathematical models were developed to predict the fluid flow and motion of gas bubbles in the RH degasser. The multiphase model volume of fluid was employed to simulate the free surface in the vacuum chamber, while injected argon bubbles were treated as discrete-phase particles and tracked using the discrete-phase model. The expansion of argon bubbles was considered. The variation of the liquid level in the vacuum chamber and the effect of the number of nozzles on the recirculation rate were discussed in detail. The optimal number of nozzles was 6. Furthermore, the decarburization process was simulated by considering three reaction sites: the free surface, inner sites of the liquid steel in the vacuum chamber, and the bubble surface. The carbon contents predicted by the decarburization model were well validated by the measured results in the literature. The effect of the gas flow rate on the decarburization process was also investigated. With the increasing gas flow rate, the carbon content gradually decreased, and then reached the steady state. The optimal gas flow rate was 2400 L/min, which was explained by the comparison of the decarburization rate constants. Meanwhile, the decarburization reaction was in a quick decarburization stage for the first 7 minutes, and for the next 13 minutes, the decarburization rate constant rapidly decreased.

42 ENGINEERING↗