Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “extreme value”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,693 records · Page 94

Validation of Computational Fluid Dynamics Simulations for Biological Performance Assessment in Hydropower units (Final Report)

The biological performance assessment (BioPA) toolset developed by Pacific Northwest National Laboratory (PNNL) estimates the relative biological performance of fish passage at a hydroelectric power turbine unit. The tool is based on the use of computational fluid dynamics (CFD) and fish biological response relationships. The recent release, BioPA-v3, is based on directly computed trajectory and collision of material Lagrangian particles using CFD simulation codes rather than the prior version that relies on Tecplot to compute streamtrace trajectories. Before modifying the toolset, a series of validation tests were performed at the various steps of modification in the toolset. Validation is a critical step of any numerical investigation that reflects the accuracy and reliability of the predicted results. It raises the confidence level of the user to use the modified version of the BioPA toolset. Several test cases were simulated and compared, where available, to observed data. The trajectory and collision of the small spherical and cylindrical particles in a water flume were compared to in-house experiments. The CFD predicted collision rate and flow field compared well with experimental observation for vane array and large cylinder as target bodies. Next, the CFD-predicted flow field and hydraulic performance of a laboratory-scale model of a Francis turbine was also successfully validated. Note that the trajectory of the particles is significantly affected by the flow field in such extreme conditions. In addition to the particle trajectories and flow field, the collision detection method employed in the CFD simulations was also successfully validated. The CFD predicted impact velocity, collision time, velocity, and trajectory of a sphere excellently matched with analytical value for a bouncing ball in the elastic collision. A similar approach was also tested and successfully validated for a collision of sphere with a 45° inclined plane. After successfully validating different cases, the BioPA toolset was modified to use direct output of the CFD prediction and the new version can be used in evaluating biological performance at hydroelectric turbines.

13 HYDRO ENERGY↗

Data release for A search for extremely-high-energy neutrinos and first constraints on the ultra-high-energy cosmic-ray proton fraction with IceCube

<h1 id="summary">Summary</h1> <p>Title: Data Release for A search for extremely-high-energy neutrinos and first constraints on the ultra-high-energy cosmic-ray proton fraction with IceCube</p> <p>The IceCube observatory analyzed 12.6 years of data in search of extremely-high-energy (EHE) neutrinos above 5 PeV. The resultant limit of the search (Fig 1), and the effective area of the event selection (Fig 7), are provided in this data release.</p> <h1 id="contents">Contents</h1> <ul> <li><p>README file: this file</p> </li> <li><p><code>differential_limit_and_sensitivity.csv</code>: a comma separated value file, giving the observed experimental differential limit, and sensitivity, of the search as a function of neutrino energy. This is the content of Fig 1 in the paper. The first column is the neutrino energy in GeV. The second column is the limit in units of GeV/cm2/s/sr. The third column is the sensitivity in units of GeV/cm2/s/sr.</p> </li> <li><p><code>effective_area.csv</code>: a comma separated value file, giving the effective area of the search as a function of energy. This is the content of Fig 7 in the paper. The first column is the neutrino energy in GeV. The second column is the total effective area of the search, summed across neutrino flavors, and averaged across neutrinos and antineutrinos, in meters-squared. The third column is the effective area of the search for the average of electron neutrino and electron antineutrinos in units of meters-squared. The fourth column is the same as the third, but for muon-flavor neutrinos. The fifth column is the same as the third and fourth, but for tau-flavor neutrinos.</p> </li> <li><p><code>demo.py</code>: a short python script to demonstrate how to read the files. Run like <code>python demo.py</code>. A standard base python installation is sufficient, as the only dependencies are numpy and matplotlib.</p> </li> </ul> <h1 id="contacts">Contacts</h1> <p>For any questions about this data release, please write to analysis@icecube.wisc.edu</p>

Astronomy and Astrophysics↗

Physiologic regulation of body energy storage

Both new and published data (rats, mice, and human beings) on three parameters - fat mass, fat-free body mass (FFBM), and total body mass in some cases - are evaluated. Steady state values of the parameters are analyzed for changes in response to specific perturbing agents and for their frequency distributions. Temporal sequences of values on individuals are examined for evidence of regulatory responses. The results lead to the hypothesis that the FFBM is regulated, but probably not as a unit, and that mass of fat is regulated with a high priority near the range extremes but with a much lower priority in the mid-range. Properties and advantages of such a mechanism are discussed.

Pitts, G. C.↗

Search for ultraviolet emission lines from a hot gaseous halo in the edge-on galaxy NGC 4244

Short and long wavelength IUE spectra of the halo region in the edge-on galaxy NGC 4244 are analyzed in order to identify evidence of line emission at the level of 0.000001 ergs per cu cm sr/s. Features are found at 1245 A and 1402 A, having peaks four times greater than the rms intensity fluctuations of nearby spectra. The spectral features are identified with semi-forbidden N V, semi-forbidden S IV at 1240 A, and Si IV and semi-forbidden O IV multiplets at 1400 A, respectively. The appearance of high-peak features and the lack of astrophysically important lines in the sample are evidence of a gas near T = 10 exp 5.2 and emission measure (EM) equal to about 0.000001 pc. However, the case for the existence of such a gas is weakened due to the existence of two other similarly sized features with no identifiable astrophysical origin and the extremely faint nature of the candidate features. The assumed upper limit for the line intensities in NGC 4244 leads to the conclusion that at T less than 100,000 K any emitting gas is either highly clumped or has a p/k value of less than 1000 per cu cm K. It is suggested that if the observed low level features in the short wavelength spectrum are real, the temperature and emission measures allow for a single component gas in the halo of NGC 4244, and are in agreement with those derived by Paresce et al. (1983).

Deharveng, J.-M.↗

Solar Electromagnetic Radiation Study for Solar Cycle 22: Solar Ultraviolet Irradiance, 120 to 300 NM: Report of Working Groups 2 and 3 of SOLERS 22

This report summarizes the activities of Working Group 2 and Working Group 3 of the SOLax Electromagnetic Radiation Study for Solar Cycle 22 (SOLERS22) Program. The international (SOLERS22) is Project 1.2 of the Solar-Terrestrial Energy Program (STEP) sponsored by SCOSTEP, a committee of the International Council of Scientific Unions). SOLERS22 is comprised of five Working Groups, each concentrating on a specific wave-length range: WG-1 - visible and infrared, WG-2 - mid-ultraviolet (200 < A < 300 nm), WG-3 - Far-ultraviolet (lambda greater than 100 and lambda less than 200 nanometers), WG-4 - extreme-ultraviolet (lambda greater than 10 and lambda less than 100 nm), and WG-5 - X-ray (lambda greater than 1 and lambda less than 10 nano meters). The overarching goals of SOLERS22 are to: 1) establish daily solar irradiance values in the specified wavelength ranges, 2) consider the evolving solar structures as the cause of temporal variations, and 3) understand the underlying physical processes driving these changes.

Rottman, G. J.↗

Achieving Innovation and Affordability Through Standardization of Materials Development and Testing

The successful expansion of development, innovation, and production within the aeronautics industry during the 20th century was facilitated by collaboration of government agencies with the commercial aviation companies. One of the initial products conceived from the collaboration was the ANC-5 Bulletin, first published in 1937. The ANC-5 Bulletin had intended to standardize the requirements of various government agencies in the design of aircraft structure. The national space policy shift in priority for NASA with an emphasis on transferring the travel to low earth orbit to commercial space providers highlights an opportunity and a need for the national and global space industries. The same collaboration and standardization that is documented and maintained by the industry within MIL-HDBK-5 (MMPDS-01) and MIL-HBDK-17 (nonmetallic mechanical properties) can also be exploited to standardize the thermal performance properties, processing methods, test methods, and analytical methods for use in aircraft and spacecraft design and associated propulsion systems. In addition to the definition of thermal performance description and standardization, the standardization for test methods and analysis for extreme environments (high temperature, cryogenics, deep space radiation, etc) would also be highly valuable to the industry. Its subsequent revisions and conversion to MIL-HDBK-5 and then MMPDS-01 established and then expanded to contain standardized mechanical property design values and other related design information for metallic materials used in aircraft, missiles, and space vehicles. It also includes guidance on standardization of composition, processing, and analytical methods for presentation and inclusion into the handbook. This standardization enabled an expansion of the technologies to provide efficiency and reliability to the consumers. It can be established that many individual programs within the government agencies have been overcome with development costs generated from these nonstandard requirements. Without industry standardization and acceptance, the programs are driven to shoulder the costs of determining design requirements, performance criteria, and then material qualification and certification. A significant investment that the industry could make to both reduce individual program development costs and schedules while expanding commercial space flight capabilities would be to invest in standardizing material performance properties for high temperature, cryogenic, and deep space environments for both metallic and nonmetallic materials.

Bray, M. H.↗

AgMIP Local, National and Global Assessments of Food System Challenges in A Changing Climate

Food systems connect a diverse network of stakeholders around the world, with complex dynamics governing production, processing, transportation, trade and consumption of food products. Extreme conditions can disrupt multiple components of the food system, with systemic connections providing structure that can both buffer and exacerbate risks. Climate change is shifting current practices in agricultural production and the broader food system, encouraging shifts toward more diverse value chains capable of drawing from multiple food producing regions to reduce the chance that an entire value chain be subject to simultaneous impacts. The IPCC Working Group I report assessed that heat waves, fires, floods and severe storms are becoming more pronounced and widespread with each degree of global warming, increasing food system risk. Food system disruptions can also come from outside the climate system, including from viral outbreaks, geopolitical conflict and socioeconomic changes. This presentation will highlight how the Agricultural Model Intercomparison and Improvement Project (AgMIP) develops modeling approaches that connect climate, biophysical and socioeconomic models in order to capture complex responses of the food system and potential interventions by diverse stakeholders in the public and private sectors. Models are applied on a range of scales that match decision contexts. These include households in specific agricultural production regions (e.g., within a country), national-level policymakers considering policies, sustainability and development priorities for a country’s agricultural sector, and global food market models that balance production and consumption around the world with competition for land, water, energy and sustainability priorities. Models are capable of capturing many important responses, but further development is needed to represent key systemic risks and the possibility for additional interventions beyond the farm gate. Improved food system models will provide important insights into our society’s ability to cope with climate change, as well as our ability to identify agricultural adaptation and mitigation opportunities to reduce overall risk.

Food systems↗

Radiation Effects in Innovative Structural Materials

The extreme radiation environments and demanding structural conditions of next-generation fission and proposed fusion reactors will require high performance materials with very high radiation resistance. Although conventional structural materials such as ferritic/ martensitic steels offer several attractive features, there is value in exploring alternative materials systems that may offer unprecedented radiation stability while also offering good thermomechanical properties. As noted elsewhere, options for designing radiation resistance include (a) the traditional approach of introducing a very high sink strength for recombination of radiation-induced vacancies and interstitials (e.g., Ti-modified stainless steels or 'nano-cluster-strengthened ferritic alloys', (b) utilizing materials with immobile vacancies at the operating temperature (e.g., silicon carbide), and (c) utilizing certain classes of materials that inherently exhibit superior resistance to radiation defect retention and accumulation (e.g., ferritic steels). Three relatively new but promising structural materials systems were selected for investigation, based on their favorable unirradiated mechanical properties and potential for good stability under irradiation: High entropy alloys (HEAs), bulk metallic glass (BMG), and MAX phase ceramics. The high configurational entropy in HEAs might alter point defect (solute and radiation defects) diffusion processes, thus potentially enhancing the recombination of radiation-produced damage. Therefore, HEAs offer the potential of a new class of materials for radiation resistance category (c) mentioned previously. A variety of BMGs such as Zr{sub 52.5}Cu{sub 17.9}Ni{sub 14.6}Al{sub 10}Ti{sub 5} offer good mechanical properties including fracture toughness values that may exceed 100 MPa-m{sup 1/2} and near net shape fabrication potential. The lack of crystallinity in BMGs prohibits the formation of conventional Frenkel pair defects under irradiation and therefore offer the possibility of another new material system for radiation resistance category (c). MAX phase ceramics (e.g., Ti{sub 3}SiC{sub 2}, Ti{sub 3}AlC{sub 2}, Ti{sub 2}AlC) have good mechanical properties and contain a nano-laminate structure that could provide a very high point defect sink strength. Due to their refractory nature, many of the MAX phase ceramics may exhibit negligible vacancy mobility up to high temperatures. Therefore, MAX phase ceramics offer the potential to provide radiation resistance in either categories (a) and (b), depending on the operating temperature. For this study, a novel 27%Fe-27%Mn-28%Ni-18%Cr single phase face centered cubic high entropy alloy was synthesized that exhibited good strength and ductility over a wide temperature range. Zr{sub 52.5}Cu{sub 17.9}Ni{sub 14.6}Al{sub 10}Ti{sub 5} (BAM-11) was selected as a prototypic advanced BMG. Several MAX phase ceramics (e.g., Ti{sub 3}SiC{sub 2}, Ti{sub 3}AlC{sub 2}, Ti{sub 2}AlC) that have good unirradiated thermal and mechanical properties were also investigated. The irradiation damage behaviors of these three novel materials systems have been studied after fission neutron at ∼75 deg. C up to 1 dpa and Ni ion irradiation at 25- 700 deg. C up to 30 dpa (lower temperatures and doses for the BMGs). All three sets of materials generally exhibited good radiation stability within certain temperature regimes. For example, the BMG exhibited only minor (<10%) change in strength that appeared to saturate after a dose of ∼1 dpa. A key shortcoming of current BMGs are that they can not be used at temperatures >>300 deg. C due to glass to crystalline transition at elevated temperature. The MAX phase ceramics irradiated at 400-700 deg. C appeared to be in the 'low temperature' regime where vacancies are immobile and therefore the radiation hardening saturated at relatively low doses. The Ti{sub 3}SiC{sub 2} MAX phase exhibited the best overall radiation stability over a wide temperature range. The HEA exhibited fine scale dislocation loop formation, no observable cavity swelling and reduced amounts of Cr depletion compared to traditional austenitic Fe-Cr-Ni alloys after ion irradiation, which suggests suppressed point defect and solute diffusion behavior. (authors)

36 MATERIALS SCIENCE↗

The Effect of Natural Disasters and Extreme Weather on Household Location Choice and Economic Welfare

Natural disasters have increased in the United States in recent decades. At the same time, there has been a shift in population away from the states in the Northeast and Midwest to areas in the Sun Belt, many of which face increased risks from natural disasters. Spatial equilibrium theory predicts that households trade off risk for income in making location decisions. This study estimates a spatial equilibrium model of household location choice to understand these trade-offs. The results show that households require as much as 0.40% of annual household income to endure an additional disaster over the course of a decade. They also show that these values differ substantially depending on household skill level with higher-skill, higher-income households willing to pay three times more in annual income to avoid an additional natural disaster. Furthermore, these results have important implications for policymakers thinking about climate change adaptation and environmental justice.

54 ENVIRONMENTAL SCIENCES↗

SPECTRAL PROPERTIES OF LARGE GRADUAL SOLAR ENERGETIC PARTICLE EVENTS. II. SYSTEMATIC Q/M DEPENDENCE OF HEAVY ION SPECTRAL BREAKS

We fit ∼0.1–500 MeV nucleon{sup −1} H–Fe spectra in 46 large solar energetic particle (SEP) events with the double power-law Band function to obtain a normalization constant, low- and high-energy parameters γ {sub a} and γ {sub b}, and break energy E {sub B}, and derive the low-energy spectral slope γ {sub 1}. We find that: (1) γ {sub a}, γ {sub 1}, and γ {sub b} are species-independent and the spectra steepen with increasing energy; (2) E {sub B} decreases systematically with decreasing Q/M scaling as (Q/M){sup α}; (3) α varies between ∼0.2–3 and is well correlated with the ∼0.16–0.23 MeV nucleon{sup −1} Fe/O; (4) in most events, α < 1.4, γ {sub b}– γ {sub a} > 3, and O E {sub B} increases with γ {sub b}– γ {sub a}; and (5) in many extreme events (associated with faster coronal mass ejections (CMEs) and GLEs), Fe/O and {sup 3}He/{sup 4}He ratios are enriched, α ≥ 1.4, γ {sub b}– γ {sub a} < 3, and E {sub B} decreases with γ {sub b}– γ {sub a}. The species-independence of γ {sub a}, γ {sub 1}, and γ {sub b} and the Q/M dependence of E {sub B} within an event and the α values suggest that double power-law SEP spectra occur due to diffusive acceleration by near-Sun CME shocks rather than scattering in interplanetary turbulence. Using γ {sub 1}, we infer that the average compression ratio for 33 near-Sun CME shocks is 2.49 ± 0.08. In most events, the Q/M dependence of E {sub B} is consistent with the equal diffusion coefficient condition and the variability in α is driven by differences in the near-shock wave intensity spectra, which are flatter than the Kolmogorov turbulence spectrum but weaker than the spectra for extreme events. In contrast, in extreme events, enhanced wave power enables faster CME shocks to accelerate impulsive suprathermal ions more efficiently than ambient coronal ions.

79 ASTRONOMY AND ASTROPHYSICS↗

Fast discharge in a spherical cavity

The work is devoted to the study of the plasma, created by a fast discharge in a spherical cavity. The discharge was driven by an inductive storage with plasma erosion opening switch (dI/dt ∼10{sup 12} A/s). The plasma was produced in a spherical cavity (alumina, 11 mm diameter). Xe, Ar, and He at the pressure 80 Pa were used as working gases. The time evolution of the spatial structure and of extreme ultraviolet (EUV) spectra of the discharge plasma was studied by means of micro channel plate detector. The discharges with Xe and Ar resulted in the stable appearance of the spherically shaped plasma with the diameter about 1–3 mm. The plasma emission in the EUV region lasts ∼500 ns. The EUV spectrum of Ar discharge at the moment of maximum of the electron temperature T{sub e} contains the lines of Ar X (ionization potential 478.7 eV), that indicates a value of T{sub e} in the range 50–100 eV. The mechanism of plasma appearance can be the cumulation of the convergent spherical shock wave, generated by fast heat deposition and magnetic pressure in working media near the inner surface of the discharge volume.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Glass Dielectrics in Extreme High‐Temperature Environment

Thin and flexible glass ribbons can be rolled into a film capacitor structures for power electronic circuits. Glass has excellent electrical properties and is a leading candidate to replace polymer films for high‐temperature applications. The dielectric properties of a low‐alkali aluminoborosilicate glass were characterized up to temperatures of 400°C. Low‐field permittivity values of 6 with dielectric loss below 0.01 were found for temperatures below 300°C. The dielectric breakdown strength exceeded 5 MV/cm for temperature of 400°C and high‐field polarization measurements showed that glass has over 95% energy efficiency at temperatures of 200°C, which is a target temperature for high‐temperature power electronic circuits driven by wide bandgap semiconductor devices.

Gao, Jun↗

Environmental Constraints that Limit Methanogenesis

Methanogens are active in many different ecosystems, including habitats with biologically-derived organic matter as substrates such as aquatic sediments, wetlands, agricultural or natural soils subject to inundation, sewage digesters, and the anoxic portions of animal digestive tracts. Methanogens are also present in habitats with geochemically-supplied substrates such as hot springs, hydrothermal vents, volcanically-influenced habitats, and, potentially, the deep crustal subsurface. Methanogens as a group tolerate a broad range of physicochemical conditions, including temperatures from -2 to 122°C, pH values of 3.0 to 10.2, salinities up to halite saturation, and pressures of at least 75 MPa. Globally, variations in methane emissions can be explained to a large degree by variations in temperature and water availability. The distribution and activity of methanogens are constrained by ecological interactions that can be stimulatory or competitive, and by physicochemical factors that act at the biochemical or bioenergetic levels. In addition to the constraints placed on methanogens by physicochemical extremes, methanogen distribution and activity are constrained by the availability of energy and nutrients, the presence of inhibitory molecules (most notably oxygen), and the seawater anion, sulfate, due to competitive ecological interactions. Although methanogen tolerances to individual extremes are documented in culture, and the corresponding biochemical adaptations are understood to varying degrees, the natural environment frequently presents combinations of extreme conditions and energy limitations that may limit methanogen distribution to less than the optimally tolerated range of a single parameter. Little is understood about the compound effects of such extremes, nor the commonalities among them that will ultimately form the basis for predictive models of environmental methanogen population distribution. Future work that targets these questions, through a combination of culture work, “omic” analyses, in situ studies, and conceptual and quantitative models, will be needed to better understand the physiological ecology of methanogens.

54 ENVIRONMENTAL SCIENCES↗

Achieving ultrahigh modulus of resilience and enhanced thermal stability in ZnO x /SU-8 interpenetrating network polymer nanocomposite nanopillars

The modulus of resilience, a mechanical property that quantifies the maximum strain energy density a material can store during elastic deformation, is a crucial parameter for materials used in flexible displays, micro/nano-electro-mechanical system (M/NEMS) actuators, and ultra-sensitive pressure sensors. In this study, ZnO x /SU-8 nanocomposite nanopillars with a diameter of 300 nm, fully infiltrated with a uniformly distributed, interpenetrating amorphous ZnO x filler network, were synthesized via vapor-phase infiltration (VPI). In-situ uniaxial nano-compression tests revealed that the modulus of resilience of ZnO x /SU-8 reaches ∼ 12 MJ/m 3 , which is an ultrahigh value among all engineering materials with comparable strength. In addition, the synthesis fidelity, inorganic infiltration depth, and mechanical performance were all significantly improved compared to VPI-synthesized AlO x nanocomposites. Thermal stability, another key requirement for M/NEMS device materials operating under extreme environments, was also notably enhanced. Furthermore, partial crystallization of the amorphous ZnO x fillers during annealing contributed to an additional increase in modulus of resilience, reaching up to ∼ 13.9 MJ/m 3 . This work presents an effective fabrication strategy for producing nanostructured organic–inorganic hybrid nanocomposites with ultrahigh modulus of resilience and superior thermal stability, paving the way for their integration into next-generation flexible displays and high-performance M/NEMS devices working under harsh environments.

36 MATERIALS SCIENCE↗

Urban Versus Lake Impacts on Heat Stress and Its Disparities in a Shoreline City

Abstract Shoreline cities are influenced by both urban‐scale processes and land‐water interactions, with consequences on heat exposure and its disparities. Heat exposure studies over these cities have focused on air and skin temperature, even though moisture advection from water bodies can also modulate heat stress. Here, using an ensemble of model simulations covering Chicago, we find that Lake Michigan strongly reduces heat exposure (2.75°C reduction in maximum average air temperature in Chicago) and heat stress (maximum average wet bulb globe temperature reduced by 0.86°C) during the day, while urbanization enhances them at night (2.75 and 1.57°C increases in minimum average air and wet bulb globe temperature, respectively). We also demonstrate that urban and lake impacts on temperature (particularly skin temperature), including their extremes, and lake‐to‐land gradients, are stronger than the corresponding impacts on heat stress, partly due to humidity‐related feedback. Likewise, environmental disparities across community areas in Chicago seen for skin temperature are much higher (1.29°C increase for maximum average values per $10,000 higher median income per capita) than disparities in air temperature (0.50°C increase) and wet bulb globe temperature (0.23°C increase). The results call for consistent use of physiologically relevant heat exposure metrics to accurately capture the public health implications of urbanization.

54 ENVIRONMENTAL SCIENCES↗

REVISITING THE 'FUNDAMENTAL PLANE' OF BLACK HOLE ACTIVITY AT EXTREMELY LOW LUMINOSITIES

We investigate the origin of the X-ray emission in low-luminosity active galactic nuclei (LLAGNs). Yuan and Cui predicted that the X-ray emission should originate from jets rather than an advection-dominated accretion flow (ADAF) when the X-ray luminosity L{sub X} of the source is below a critical value of L{sub X,crit} {approx} 10{sup -6} L{sub Edd}. This prediction implies that the X-ray spectrum in such sources should be fitted by jets rather than ADAFs. Furthermore, below L{sub X,crit} the correlation between radio (L{sub R}) and X-ray (L{sub X}) luminosities and the black hole mass (M)-the so-called fundamental plane of black hole activity-should deviate from the general correlation obtained by Merloni et al. and become steeper. The Merloni et al. correlation is described by logL{sub R} = 0.6logL{sub X} + 0.78logM + 7.33, while the predicted correlation is logL{sub R} = 1.23logL{sub X} + 0.25logM - 13.45. We collect data from the literature to check the validity of these two expectations. We find that among the 16 LLAGNs with good X-ray and radio spectra, 13 are consistent with the Yuan and Cui prediction. For the 22 LLAGNs with L{sub X} < L{sub X,crit}, the fundamental plane correlation is described by logL{sub R} = 1.22logL{sub X} + 0.23logM - 12.46, also in excellent agreement with the prediction.

79 ASTRONOMY AND ASTROPHYSICS↗

OBSERVING THE FINE STRUCTURE OF LOOPS THROUGH HIGH-RESOLUTION SPECTROSCOPIC OBSERVATIONS OF CORONAL RAIN WITH THE CRISP INSTRUMENT AT THE SWEDISH SOLAR TELESCOPE

Observed in cool chromospheric lines, such as H{alpha} or Ca II H, coronal rain corresponds to cool and dense plasma falling from coronal heights. Considered as a peculiar sporadic phenomenon of active regions, it has not received much attention since its discovery more than 40 years ago. Yet, it has been shown recently that a close relationship exists between this phenomenon and the coronal heating mechanism. Indeed, numerical simulations have shown that this phenomenon is most likely due to a loss of thermal equilibrium ensuing from a heating mechanism acting mostly toward the footpoints of loops. We present here one of the first high-resolution spectroscopic observations of coronal rain, performed with the CRisp Imaging Spectro Polarimeter (CRISP) instrument at the Swedish Solar Telescope. This work constitutes the first attempt to assess the importance of coronal rain in the understanding of the coronal magnetic field in active regions. With the present resolution, coronal rain is observed to literally invade the entire field of view. A large statistical set is obtained in which dynamics (total velocities and accelerations), shapes (lengths and widths), trajectories (angles of fall of the blobs), and thermodynamic properties (temperatures) of the condensations are derived. Specifically, we find that coronal rain is composed of small and dense chromospheric cores with average widths and lengths of {approx}310 km and {approx}710 km, respectively, average temperatures below 7000 K, displaying a broad distribution of falling speeds with an average of {approx}70 km s{sup -1}, and accelerations largely below the effective gravity along loops. Through estimates of the ion-neutral coupling in the blobs we show that coronal rain acts as a tracer of the coronal magnetic field, thus supporting the multi-strand loop scenario, and acts as a probe of the local thermodynamic conditions in loops. We further elucidate its potential in coronal heating. We find that the cooling in neighboring strands occurs simultaneously in general suggesting a similar thermodynamic evolution among strands, which can be explained by a common footpoint heating process. Constraints for coronal heating models of loops are thus provided. Estimates of the fraction of coronal volume with coronal rain give values between 7% and 30%. Estimates of the occurrence time of the phenomenon in loops set times between 5 and 20 hr, implying that coronal rain may be a common phenomenon, in agreement with the frequent observations of cool downflows in extreme-ultraviolet lines. The coronal mass drain rate in the form of coronal rain is estimated to be on the order of 5 Multiplication-Sign 10{sup 9} g s{sup -1}, a significant quantity compared to the estimate of mass flux into the corona from spicules.

79 ASTRONOMY AND ASTROPHYSICS↗