Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “electronic transformers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,693 records · Page 94

Reconciling FTIR Spectroscopy with Top-off Operations at the Advanced Light Source

Top-off operations is a quasi-continuous injection mode that increases the flux and brightness of a synchrotron source and improves thermal stability of optical components by maintaining a constant current in the storage ring. Although the increased and constant flux is advantageous for FTIR measurements, the frequent injections (about one every 30 seconds in the ALS case) introduce artifacts into the spectrum by creating spikes in the interferogram data. These spikes are caused by brief beam motion during the injection event. Here, we describe our efforts to minimize the effects of top-off generated interferogram spikes on several FTIR spectrometers. They include using a fast feedback mirror system to correct for beam motion and a gating signal to inhibit interferogram collection during a top-off injection.

43 PARTICLE ACCELERATORS↗

Micro-nano scale ripples on metallic glass induced by laser pulse

A Zr{sub 47.7}Cu{sub 31}Ni{sub 9}Al{sub 12.3} bulk metallic glass was irradiated directly by KrF excimer laser pulses with wavelength 248 nm and duration 10 ns. Scanning electronic microscope photographs indicated that many ripples in micro-nano scale would be generated on the edge of the irradiated area under the action of the higher intensity laser pulse. Detailed observation demonstrated that the ripples exhibited fluidity and became closer and closer out from interior. Theoretical analysis revealed the formation mechanism of the ripples, including melting, subsequent propagation of capillary waves and final solidification.

36 MATERIALS SCIENCE↗

Improving the accuracy and efficiency of time-resolved electronic spectra calculations: Cellular dephasing representation with a prefactor

Time-resolved electronic spectra can be obtained as the Fourier transform of a special type of time correlation function known as fidelity amplitude, which, in turn, can be evaluated approximately and efficiently with the dephasing representation. Here we improve both the accuracy of this approximation—with an amplitude correction derived from the phase-space propagator—and its efficiency—with an improved cellular scheme employing inverse Weierstrass transform and optimal scaling of the cell size. We demonstrate the advantages of the new methodology by computing dispersed time-resolved stimulated emission spectra in the harmonic potential, pyrazine, and the NCO molecule. In contrast, we show that in strongly chaotic systems such as the quartic oscillator the original dephasing representation is more appropriate than either the cellular or prefactor-corrected methods.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Investigation of new superhard carbon allotropes with promising electronic properties

During the systematic search for a new superhard carbon allotrope, we predicted three structures with promising physical properties. Our electronic structure calculations show that these materials have a semiconducting band gap and a high carrier mobility comparable with diamond. The simulated x-ray diffraction patterns of the proposed materials are in a good agreement with the experimental X-ray spectra. Evaluated phase transition pressures from graphite to the new proposed carbon phases are smaller than 25 GPa and close to the experimental values.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The A-site driven phase transition procedure of (Pb{sub 0.97}La{sub 0.02})(Zr{sub 0.42}Sn{sub 0.40}Ti{sub 0.18})O{sub 3} ceramics: An evidence from electronic structure variation

The transition of (Pb{sub 0.97}La{sub 0.02})(Zr{sub 0.42}Sn{sub 0.40}Ti{sub 0.18})O{sub 3} (PLZST) ceramic has been investigated by temperature-dependent X-ray diffraction (XRD) and spectroscopic ellipsometry (SE). The rhombohedral and tetragonal symmetries are confirmed by XRD analysis. Two interband transitions (E{sub cp1} and E{sub cp2}) located at about 3.7 and 5.2 eV can be derived from the second derivative of the complex dielectric functions using the standard critical point (SCP) model. Except for the negative temperature coefficient parts, the transitions present additional parts corresponding to appearance of the antiferroelectric (AFE) phase. The phenomena can be attributed to variation of the electronic structure during A-site driven phase transition.

36 MATERIALS SCIENCE↗

Design and characterization of electron beam focusing for X-ray generation in novel medical imaging architecture

A novel electron beam focusing scheme for medical X-ray sources is described in this paper. Most vacuum based medical X-ray sources today employ a tungsten filament operated in temperature limited regime, with electrostatic focusing tabs for limited range beam optics. This paper presents the electron beam optics designed for the first distributed X-ray source in the world for Computed Tomography (CT) applications. This distributed source includes 32 electron beamlets in a common vacuum chamber, with 32 circular dispenser cathodes operated in space charge limited regime, where the initial circular beam is transformed into an elliptical beam before being collected at the anode. The electron beam optics designed and validated here are at the heart of the first Inverse Geometry CT system, with potential benefits in terms of improved image quality and dramatic X-ray dose reduction for the patient.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Tailored benzoxazines as novel resin systems for printed circuit boards in high temperature e-mobility applications

This study focuses on the development of Bisphenol-F-benzoxazine resins blended with different ratios of a trifunctional epoxy resin suitable as matrix for substrates for high temperature printed circuit board (HT-PCB) applications. With the benzoxazine blends glass transition temperatures of more than 190 °C could be achieved in combination with a coefficient of thermal expansion in thickness direction (z-CTE) of less than 60 ppm/K without adding any fillers. This shows the high potential of the benzoxazine-epoxy blend systems as substrate materials for HT-PCBs. To understand the thermal behavior of the different formulations, the apparent crosslink density was calculated based on data from Dynamic Mechanical Analysis. Laminates in laboratory scale were prepared and characterized to demonstrate the transformation of the neat resin properties into real electronic substrate properties. The produced laminates exhibit a z-CTE below 40 ppm/K.

36 MATERIALS SCIENCE↗

Epoxy elastomers reinforced with functionalized multi-walled carbon nanotubes as stimuli-responsive shape memory materials

In this work, the incorporation of multiwalled carbon nanotubes (MWCNT) into epoxy-based elastomers was carried out in order to obtain nanocomposite systems with shape memory effect. For the preparation of elastomeric matrices, p-bis(2,3-epoxypropoxy)-α-methylstilbene (DOMS) was cured with sebacic acid. DOMS was synthesized in our laboratory and it is characterized by a rigid-rod, potentially liquid crystalline structure. A lightly cross-linked liquid crystalline elastomer was obtained. As for nanocomposites, variable amounts (0.75, 1.50, 3.0, 6.0, 12.0 wt.%) of COOH-MWCNTs were employed. In order to improve the nanotubes dispersibility and the interfacial adhesion with the epoxy matrix, an optimized two-step procedure was developed, which consisted in grafting the epoxy monomer onto the nanotube surface and then curing it in presence of crosslinking agent. DOMS-functionalized MWCNT were characterized through solvent dispersion experiments, FTIR spectroscopy and TGA analysis, which demonstrated the occurred covalent functionalization of the nanotubes with the epoxy monomers. The morphological analysis through electron microscopy demonstrated that this was an efficient strategy to improve the dispersion of nanotubes within the matrix. The second part of the work was devoted to the structural, thermal, mechanical and electric characterization of elastomeric nanocomposites. The results indicated a general improvement of properties of nanocomposites. Also, independently of the nanotube content, a smectic phase formed. Shape memory features of LC systems were also evaluated. It was demonstrated the shape could be recovered through heating, solvent immersion, as well as upon the application of an electrical field.

36 MATERIALS SCIENCE↗

Influence of step morphology on the structural phase transition of the α-Al{sub 2}O{sub 3}(0001) surface

The structural phase transition from the 1 × 1 to the √31 × √31 ± R9° structure of two types of α-Al{sub 2}O{sub 3}(0001) surfaces has been investigated using reflection high-energy electron diffraction. One of the α-Al{sub 2}O{sub 3}(0001) surfaces was composed of regularly arranged monolayer steps (M-surface), and the other surface was composed of multiples of bilayer high steps (B-surface). The surface transition from the 1 × 1 to the √31 × √31 ± R9° structure starts at 1200 °C on the M-surface, but the transition occurs at 1600 °C on the B-surface. We discuss the difference in the stability of these surfaces at high temperature from the viewpoint of the stoichiometry near the step edge and conclude that the B-surface is more stable than the M-surface.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Spectroscopic properties of (PVA+ZnO):Mn{sup 2+} polymer films

Electron Paramagnetic Resonance (EPR), optical absorption and infrared spectral studies have been carried out on Mn{sup 2+} ions doped in poly(vinyl alcohol) complexed with zinc oxide polymer films prepared by solution cast technique. The EPR spectra of 1 mol% Mn{sup 2+} ions doped polymer complex (PVA+ZnO) at room temperature exhibit sextet hyperfine structure (hfs), centered at 2.01. The spin-Hamiltonian parameter values indicate that the ground state of Mn{sup 2+} ion in d{sup 5} and the site symmetry around Mn{sup 2+} ions in tetragonally distorted octa hedral site. The optical absorption spectra exhibits two bands centered at 275nm at 437nm. The FTIR spectrum exhibits bands characteristic of stretching and banding vibrations of O-H, C-H and C=C groups.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Microstructural studies of nanocrystalline barium zirconium titanate (BZT) for piezoelectric applications

Lead-free piezoelectric ceramics based on barium titanate (BaTiO{sub 3}) with substitution of Zr{sup 4+} were prepared using sol-gel method. The Ba(Zr{sub x}Ti{sub 1-x})O{sub 3}, (BZT) powders with x = 0.0, 0.1, 0.2 and 0.3 were pressed into pellets and sintered at 1250 °C for 2 h. Focusing on the effect of Zr{sup 4+} substitutions into BaTiO{sub 3} perovskite system, the phase transition and microstructural properties of BZT ceramics were studied using XRD, SEM and EDX spectroscopy. All X-ray diffractograms were fitted using Pawley refinement model. The XRD diffractograms revealed the progressive phase transition from tetragonal to cubic phase as Zr content increased. The crystallite exhibited decreasing trend and was supported by shrinkage in grain size. The EDX analysis confirmed the successful substitution of Ti{sup 4+} with Zr{sup 4+} in BaTiO3 crystal.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Electric field-induced transport modulation in VO{sub 2} FETs with high-k oxide/organic parylene-C hybrid gate dielectric

We report on the observation of reversible and immediate resistance switching by high-k oxide Ta{sub 2}O{sub 5}/organic parylene-C hybrid dielectric-gated VO{sub 2} thin films. Resistance change ratios at various temperatures in the insulating regime were demonstrated to occur in the vicinity of phase transition temperature. We also found an asymmetric hole-electron carrier modulation related to the suppression of phase transition temperature. The results in this research provide a possibility for clarifying the origin of metal-insulator transition in VO{sub 2} through the electrostatic field-induced transport modulation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Structural, topographical and electrical properties of cerium doped strontium barium niobate (Ce:SBN60) ceramics

Tungsten bronze type cerium doped strontium barium niobate (Ce:SBN - Sr{sub 0.6}B{sub 0.4}Nb{sub 2}O{sub 6}) ceramics were synthesized by solid state process. Cerium was used as dopant to improve its electrical properties. Influence of Ce{sup +} ions on the photoluminescence properties was investigated in detail. The grain size topographical behavior of SBN powders and their associated abnormal grain growth (AGG) were completely analyzed through SEM studies. Finally dielectric, measurement discusses about the broad phase transition observed due to cerium dopant The results were discussed in detail.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

NO 2 -mediated voloxidation for iodine separation from cesium iodide surrogates

Heterogeneous NO 2 -mediated oxidation of uranium, also known as advanced voloxidation, is a proposed head-end reprocessing method for used nuclear fuel. An advantage of advanced voloxidation is the removal of volatile fission products, which complicate downstream separation and containment challenges leading to increased processing economics. Iodine, one of the volatile species of interest, has exhibited varied results in this process. Using CsI as a surrogate material, this work mimics the effect of NO 2 -based voloxidation on iodine and sheds light on the factors that influence the solid–gas phase reaction. Solid-state analysis using Fourier transform infrared attenuated total reflectance spectroscopy and scanning electron microscopy with energy-dispersive X-ray spectroscopy confirmed the conversion of CsI to CsNO 3 . Iodine separation ranged from 46% to 100% across multiple tests. Iodine separation was most effective when multiple recharges of NO 2 were administered. In conclusion, at the bench scale, liberating iodine from CsI appears to occur within 1 h, but the presence of surface H 2 O and the composition of the NO x reagent mixtures greatly influence its success.

advanced voloxidation↗

Foundations of machine learning for low-temperature plasmas: methods and case studies

Abstract Machine learning (ML) and artificial intelligence have proven to be an invaluable tool in tackling a vast array of scientific, engineering, and societal problems. The main drivers behind the recent proliferation of ML in practically all aspects of science and technology can be attributed to: (a) improved data acquisition and inexpensive data storage; (b) exponential growth in computing power; and (c) availability of open-source software and resources that have made the use of state-of-the-art ML algorithms widely accessible. The impact of ML on the field of low-temperature plasmas (LTPs) could be particularly significant in the emerging applications that involve plasma treatment of complex interfaces in areas ranging from the manufacture of microelectronics and processing of quantum materials, to the LTP-driven electrification of the chemical industry, and to medicine and biotechnology. This is primarily due to the complex and poorly-understood nature of the plasma-surface interactions in these applications that pose unique challenges to the modeling, diagnostics, and predictive control of LTPs. As the use of ML is becoming more prevalent, it is increasingly paramount for the LTP community to be able to critically analyze and assess the concepts and techniques behind data-driven approaches. To this end, the goal of this paper is to provide a tutorial overview of some of the widely-used ML methods that can be useful, amongst others, for discovering and correlating patterns in the data that may be otherwise impractical to decipher by human intuition alone, for learning multivariable nonlinear data-driven prediction models that are capable of describing the complex behavior of plasma interacting with interfaces, and for guiding the design of experiments to explore the parameter space of plasma-assisted processes in a systematic and resource-efficient manner. We illustrate the utility of various supervised, unsupervised and active learning methods using LTP datasets consisting of commonly-available, information-rich measurements (e.g. optical emission spectra, current–voltage characteristics, scanning electron microscope images, infrared surface temperature measurements, Fourier transform infrared spectra). All the ML demonstrations presented in this paper are carried out using open-source software; the datasets and codes are made publicly available. The FAIR guiding principles for scientific data management and stewardship can accelerate the adoption and development of ML in the LTP community.

Physics↗

Silver and gold doped hydroxyapatite nanocomposites for enhanced bone regeneration

In this work, we report the osteogenic potential of silver (Ag), gold (Au), or silver–gold doped hydroxyapatite nanoparticles (Ag-Au-HA) in zebrafish (ZF) jawbone regeneration (JBR) model. The hydroxyapatite (HA, Ca 10 (PO 4 ) 6 (OH) 2 ), Ag-HA, Au-HA, and Ag-Au-HA nanomaterials were synthesized by the co-precipitation procedure. The surface structures of Ag-HA, Au-HA, HA, and Ag-Au-HA were analysed by scanning electron microscopy, transmission-electron microscopy (TEM), x-ray diffraction, Fourier transform infrared (FTIR), UV–vis, energy dispersive x-ray spectroscopy (EDS), elemental mapping, and laser fluorescent spectroscopy. The TEM and EDS analysis confirmed that the Ag and Au are associated with the surface of HA nanoparticle. The chemical structure of HA, Ag-HA, Au-HA, and Ag-Au-HA nanoparticles was validated by FTIR and EDS analysis. We observed that Ag and Au are associated with HA nanoparticles by electrostatic, wander wall, and electrostatic and H-bonding interaction. The effect of Ag-HA, Au-HA, and Ag-Au-HA nanoparticles on bone regeneration was confirmed by ZF JBR model. The significant growth of ZF bone regeneration was observed in Ag-Au-HA nanoparticles as compared with HA, Ag-HA, and Au-HA nanoparticles. In conclusion, these results indicating a therapeutic potential of Ag-Au-HA compositions suggest these nanomaterials would be excellent for bone regeneration and fracture healing.

36 MATERIALS SCIENCE↗

Experimental study of active LRC circuits with PT symmetries

Mutually coupled modes of a pair of active LRC circuits, one with amplification and another with an equivalent amount of attenuation, provide an experimental realization of a wide class of systems where gain and loss mechanisms break the Hermiticity while preserving parity-time PT symmetry. For a value {gamma}{sub PT} of the gain and loss strength parameter the eigenfrequencies undergo a spontaneous phase transition from real to complex values, while the normal modes coalesce, acquiring a definite chirality. The consequences of the phase transition in the spatiotemporal energy evolution are also presented.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Persistent Room-Temperature Photodarkening in Cu-Doped β - Ga 2 O 3

β–Ga 2 O 3 is an ultrawide band gap semiconductor with emerging applications in power electronics. Here, the introduction of acceptor dopants yields semi-insulating substrates necessary for thin-film devices. In the present work, exposure of Cu-doped β–Ga 2 O 3 to UV light > 4 eV is shown to cause large, persistent photo-induced darkening at room temperature. Electron paramagnetic resonance spectroscopy indicates that light exposure converts Cu 2+ to Cu 3+ , a rare oxidation state that is responsible for the optical absorption. The photodarkening is accompanied by the appearance of O–H vibrational modes in the infrared spectrum. Hybrid function calculations show that Cu acceptors can favorably complex with hydrogen donors incorporated as interstitial (Hi) or substitutional (HO) defects. When Cu Ga –HO complexes absorb light, hydrogen is released, contributing to the observed Cu 3+ species and O–H modes.

36 MATERIALS SCIENCE↗