SEARCH · Engineering Papers
Results for “electronic conduction”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Formation of uniformly sized gold nanoparticles over graphene by MeV electron beam irradiation for transparent conducting films
Highly flexible, transparent, and conducting sheet was fabricated by decoration of uniformly sized gold nanoparticles (Au NPs) with high-density on large-area graphene by MeV electron beam irradiation (MEBI) at room temperature under ambient conditions. The Au NPs with an average size of 13.6 ± 3.5 nm were clearly decorated on the graphene after MEBI with an irradiation energy of 1.0 MeV. The sheet resistances of the Au NPs/graphene significantly decreased. For the Au NPs/trilayer graphene, the sheet resistance reached to ∼45 Ω/sq, and the optical transmittance was ∼90.2% which is comparable to that of conventional indium tin oxide film.
Luminescence and electrical properties of single ZnO/MgO core/shell nanowires
To neutralise the influence of the surface of ZnO nanowires for photonics and optoelectronic applications, we have covered them with insulating MgO film and individually contacted them for electrical characterisation. We show that such a metal-insulator-semiconductor-type nanodevice exhibits a high diode ideality factor of 3.4 below 1 V. MgO shell passivates ZnO surface states and provides confining barriers to electrons and holes within the ZnO core, favouring excitonic ultraviolet radiative recombination, while suppressing defect-related luminescence in the visible and improving electrical conductivity. The results indicate the potential use of ZnO/MgO nanowires as a convenient building block for nano-optoelectronic devices.
Morphological and electrical properties of epoxy-based composites reinforced with exfoliated graphite
An experimental study has been carried out to prepare and characterize epoxy/amine-based composites filled with different percentages of partially exfoliated graphite (i.e. pEG) particles having an exfoliation degree of 56% in order to analyze the effect of the filler amounts on the electrical properties of the resulting nanocomposites. Moreover, in order to fully investigate the direct relationship between the physical properties of the employed filler and the results of the electrical characterization, a structural and morphological characterization of the pEG samples is carried out by means of various type of analysis such as X-ray diffraction patterns, micro-Raman and Scanning Electron Microscopy (SEM) images. The DC electrical characterization reveals a percolation thresholds (EPT) that falls in the range [2–3] wt% and an electrical conductivity of about 0.66 S/m at the highest filler loading (6.5 wt%). From the analysis of the percolative curve it is possible to derive the percolation law parameters and in particular the critical exponent t, whose value (i.e. 1.2) reflects an effective 2D organization of the percolating structure consistent with the type of filler used (2-dimensional). Finally, an extensive analysis concerning the electrical properties in the frequency domain has been carried out in order to evaluate the effectiveness of pEG-loaded composites in terms of electromagnetic interference compatibility (EMC) and their applicability as radar absorbers materials (RAMs).
Role of Structurally and Magnetically Modified Nanoclusters in Colossal Magnetoresistance
It is generally accepted that electronic and magnetic phase separation is the origin of many of exotic properties of strongly correlated electron materials, such as colossal magnetoresistance (CMR), an unusually large variation in the electrical resistivity under applied magnetic field. In the simplest picture, the two competing phases are those associated with the material state on either side of the phase transition. Those phases would be paramagnetic insulator and ferromagnetic metal for the CMR effect in doped manganites. It has been speculated that a critical component of the CMR phenomenon is nanoclusters with quite different properties than either of the terminal phases during the transition. However, the role of these nanoclusters in the CMR effect remains elusive because the physical properties of the nanoclusters are hard to measure when embedded in bulk materials. Here we show the unexpected behavior of the nanoclusters in the CMR compound La{sub 1-x}Ca{sub x}MnO{sub 3} (0.4 {le} x < 0.5) by directly correlating transmission electron microscopy observations with bulk measurements. The structurally modified nanoclusters at the CMR temperature were found to be ferromagnetic and exhibit much higher electrical conductivity than previously proposed. Only at temperatures much below the CMR transition, the nanoclusters are antiferromagnetic and insulating. These findings substantially alter the current understanding of these nanoclusters on the material's functionality and would shed light on the microscopic study on the competing spin-lattice-charge orders in strongly correlated systems.
On vacuum UV study of solids Status report no. 7, Nov. 1 - Apr. 30, 1966
Electron emission, conductivity, and luminescence of selected solids under ultraviolet radiation
Three-fluid, three-dimensional magnetohydrodynamic solar wind model with eddy viscosity and turbulent resistivity
We have developed a three-fluid, three-dimensional magnetohydrodynamic solar wind model that incorporates turbulence transport, eddy viscosity, turbulent resistivity, and turbulent heating. The solar wind plasma is described as a system of co-moving solar wind protons, electrons, and interstellar pickup protons, with separate energy equations for each species. Numerical steady-state solutions of Reynolds-averaged solar wind equations coupled with turbulence transport equations for turbulence energy, cross helicity, and correlation length are obtained by the time relaxation method in the corotating with the Sun frame of reference in the region from 0.3 to 100 AU (but still inside the termination shock). The model equations include the effects of electron heat conduction, Coulomb collisions, photoionization of interstellar hydrogen atoms and their charge exchange with the solar wind protons, turbulence energy generation by pickup protons, and turbulent heating of solar wind protons and electrons. The turbulence transport model is based on the Reynolds decomposition and turbulence phenomenologies that describe the conversion of fluctuation energy into heat due to a turbulent cascade. In addition to using separate energy equations for the solar wind protons and electrons, a significant improvement over our previous work is that the turbulence model now uses an eddy viscosity approximation for the Reynolds stress tensor and the mean turbulent electric field. The approximation allows the turbulence model to account for driving of turbulence by large-scale velocity gradients. Using either a dipole approximation for the solar magnetic field or synoptic solar magnetograms from the Wilcox Solar Observatory for assigning boundary conditions at the coronal base, we apply the model to study the global structure of the solar wind and its three-dimensional properties, including embedded turbulence, heating, and acceleration throughout the heliosphere. The model results are compared with plasma and magnetic field observations on WIND, Ulysses, and Voyager 2 spacecraft.
The Shubnikov-de Haas effect and thermoelectric properties of Tl-doped Sb{sub 2}Te{sub 3} and Bi{sub 2}Se{sub 3}
The influence of doping with Tl on the Shubnikov-de Haas effect at T = 4.2 K in magnetic fields up to 38 T in p-Sb{sub 2−x}Tl{sub x}Te{sub 3} (x = 0, 0.005, 0.015, and 0.05) and n-Bi{sub 2−x}Tl{sub x}Se{sub 3} (x = 0, 0.01, 0.02, 0.04, and 0.06) single crystals is investigated. Extreme cross-sections of the Fermi surface in both materials decrease upon doping with Tl: the hole concentration decreases in Sb{sub 2−x}Tl{sub x}Te{sub 3} due to the donor effect of Tl and the electron concentration in n-Bi{sub 2−x}Tl{sub x}Se{sub 3} decreases due to the acceptor effect of Tl. The temperature dependences of the Seebeck coefficient, electrical conductivity, thermal conductivity, and dimensionless thermoelectric figure of merit in a temperature range of 77–300 K are measured. The thermal conductivity and electrical conductivity decrease upon doping with Tl both in p-Sb{sub 2−x}Tl{sub x}Te{sub 3} and in n-Bi{sub 2−x}Tl{sub x}Se{sub 3}. The Seebeck coefficient increases in all compositions upon an increase in doping over the entire measured temperature range. The thermoelectric figure of merit increases upon doping with Tl.
Seebeck coefficient and thermal conductivity of doped armchair graphene nanoribbon in the presence of magnetic field
Highlights: • Theoretical calculation of Seebeck coefficient and thermal conductivity of electrons on grapheme nanoribbon. • The investigation of the effect of magnetic field and ribbon width on temperature dependence of thermoelectric properties of nanoribbon. • The study of thermopower as a function of magnetic field and temperature. - Abstract: We address the thermal conductivity and Seebeck coefficient of armchair graphene nanoribbon within tight binding model Hamiltonian in the presence of magnetic field. The possible effects of ribbon width, magnetic field chemical potential on thermoelectric properties are investigated. Green's function approach has been employed in order to calculate transport coefficients of the system. We have also found the temperature dependence of the thermal conductivity for various ribbon widths and chemical potentials. Our results show a peak appears in temperature dependence of thermal conductivity of insulator nanoribbon for low magnetic fields. Upon increasing magnetic field, thermal conductivity shows a monotonic decreasing behavior and peak disappears. Our results show the increase of chemical potential causes to decreasing behavior for thermal conductivity. Moreover we study the effects of magnetic field on temperature behavior of thermopower of insulator graphene nanoribbon in details.
Laboratory Photoionization Fronts in Nitrogen Gas: A Numerical Feasibility and Parameter Study
Photoionization fronts play a dominant role in many astrophysical situations but remain difficult to achieve in a laboratory experiment. We present the results from a computational parameter study evaluating the feasibility of the photoionization experiment presented in the design paper by Drake et al. in which a photoionization front is generated in a nitrogen medium. The nitrogen gas density and the Planckian radiation temperature of the X-ray source define each simulation. Simulations modeled experiments in which the X-ray flux is generated by a laser-heated gold foil, suitable for experiments using many kJ of laser energy, and experiments in which the flux is generated by a "z-pinch" device, which implodes a cylindrical shell of conducting wires. The models are run using crash, our block-adaptive-mesh code for multimaterial radiation hydrodynamics. The radiative transfer model uses multigroup, flux-limited diffusion with 30 radiation groups. In addition, electron heat conduction is modeled using a single-group, flux-limited diffusion. In the theory, a photoionization front can exist only when the ratios of the electron recombination rate to the photoionization rate and the electron-impact ionization rate to the recombination rate lie in certain ranges. These ratios are computed for several ionization states of nitrogen. Photoionization fronts are found to exist for laser-driven models with moderate nitrogen densities (~10 21 cm –3 ) and radiation temperatures above 90 eV. For "z-pinch"-driven models, lower nitrogen densities are preferred (<10 21 cm –3 ). Here, we conclude that the proposed experiments are likely to generate photoionization fronts.
Laser-Induced Modification Of Energy Bands Of Transparent Solids
Laser-induced variations of electron energy bands of transparent solids significantly affect the initial stages of laser-induced ablation (LIA) influencing rates of ionization and light absorption by conduction-band electrons. We analyze fast variations with characteristic duration in femto-second time domain that include: 1) switching electron functions from bonding to anti-bonding configuration due to laser-induced ionization; 2) laser-driven oscillations of electrons in quasi-momentum space; and 3) direct distortion of the inter-atomic potential by electric field of laser radiation. Among those effects, the latter two have zero delay and reversibly modify band structure taking place from the beginning of laser action. They are of special interest due to their strong influence on the initial stage and threshold of laser ablation. The oscillations modify the electron-energy bands by adding pondermotive potential. The direct action of radiation's electric field leads to high-frequency Franz-Keldysh effect (FKE) spreading the allowed electron states into the forbidden-energy bands. FKE provides decrease of the effective band gap while the electron oscillations lead either to monotonous increase or oscillatory variations of the gap. We analyze the competition between those two opposite trends and their role in initiating LIA.
Preheating ablation effects on the Rayleigh-Taylor instability in the weakly nonlinear regime
The two-dimensional Rayleigh-Taylor instability (RTI) with and without thermal conduction is investigated by numerical simulation in the weakly nonlinear regime. A preheat model {kappa}(T)={kappa}{sub SH}[1+f(T)] is introduced for the thermal conduction [W. H. Ye, W. Y. Zhang, and X. T. He, Phys. Rev. E 65, 057401 (2002)], where {kappa}{sub SH} is the Spitzer-Haerm electron thermal conductivity coefficient and f(T) models the preheating tongue effect in the cold plasma ahead of the ablation front. The preheating ablation effects on the RTI are studied by comparing the RTI with and without thermal conduction with identical density profile relevant to inertial confinement fusion experiments. It is found that the ablation effects strongly influence the mode coupling process, especially with short perturbation wavelength. Overall, the ablation effects stabilize the RTI. First, the linear growth rate is reduced, especially for short perturbation wavelengths and a cutoff wavelength is observed in simulations. Second, the second harmonic generation is reduced for short perturbation wavelengths. Third, the third-order negative feedback to the fundamental mode is strengthened, which plays a stabilization role. Finally, on the contrary, the ablation effects increase the generation of the third harmonic when the perturbation wavelengths are long. Our simulation results indicate that, in the weakly nonlinear regime, the ablation effects are weakened as the perturbation wavelength is increased. Numerical results obtained are in general agreement with the recent weakly nonlinear theories as proposed in [J. Sanz, J. Ramirez, R. Ramis et al., Phys. Rev. Lett. 89, 195002 (2002); J. Garnier, P.-A. Raviart, C. Cherfils-Clerouin et al., Phys. Rev. Lett. 90, 185003 (2003)].
Enhanced metallic properties of SrRuO 3 thin films via kinetically controlled pulsed laser epitaxy
Metal electrodes are a universal element of all electronic devices. Conducting SrRuO 3 (SRO) epitaxial thin films have been extensively used as electrodes in complex-oxide heterostructures due to good lattice mismatches with perovskite substrates. However, when compared to SRO single crystals, SRO thin films have shown reduced conductivity and Curie temperatures (T C ), which can lead to higher Joule heating and energy loss in the devices. In this paper, we report that high-quality SRO thin films can be synthesized by controlling the plume dynamics and growth rate of pulsed laser epitaxy (PLE) with real-time optical spectroscopic monitoring. The SRO thin films grown under the kinetically controlled conditions, down to ca. 16 nm in thickness, exhibit both enhanced conductivity and T C as compared to bulk values, due to their improved stoichiometry and a strain-mediated increase of the bandwidth of Ru 4d electrons. Finally, this result provides a direction for enhancing the physical properties of PLE-grown thin films and paves a way to improved device applications.
Great reduction of loss at high electric field in the polyvinylidene fluoride/aromatic polythiourea blend films along with an irreversible phase transition
In this paper, the polarization response of dielectric blend based on the polyvinylidene fluoride (PVDF) and aromatic polythiourea (ArPTU) was investigated. It is found that the conduction loss at high field has been reduced 2–4 times along with an interesting irreversible transition under high electric field. The loss at 700 MV/m can be kept below 20%, which is better than most other polar dielectric polymers. It is proved that the transition is a phase change from glass phase to polar β phase at a critical field. And the highly polar thiourea groups of ArPTU can act as traps for the electrons, reduce conduction loss greatly and prevent dielectric breakdown by stabilizing the electron energy.
Investigation of trap states under Schottky contact in GaN/AlGaN/AlN/GaN high electron mobility transistors
Forward gate-bias stress experiments are performed to investigate the variation of trap states under Schottky contact in GaN-based high electron mobility transistors. Traps with activation energy E{sub T} ranging from 0.22 eV to 0.31 eV are detected at the gate-semiconductor interface by dynamic conductance technique. Trap density decreases prominently after stressing, particularly for traps with E{sub T} > 0.24 eV. X-ray photoelectron spectroscopy measurements reveal a weaker Ga-O peak on the stressed semiconductor surface. It is postulated that oxygen is stripped by Ni to form NiO upon electrical stress, contributing to the decrease in O{sub N} donor sates under the gate contact.
Benchmark calculations of electron impact electronic excitation of the hydrogen molecule
We present benchmark integrated and differential cross-sections for electron collisions with H 2 using two different theoretical approaches, namely, the R-matrix and molecular convergent close-coupling. This is similar to comparative studies conducted on electron–atom collisions for H, He and Mg. Electron impact excitation to the ${\mathrm{b}}^{3}{{\Sigma}}_{\mathrm{u}}^{+}$, ${\mathrm{a}}^{3}{{\Sigma}}_{\mathrm{g}}^{+}$, ${\mathrm{B}}^{1}{{\Sigma}}_{\mathrm{u}}^{+}$, c3Πu, ${\mathrm{E}\mathrm{F}}^{1}{{\Sigma}}_{\mathrm{g}}^{+}$, C1Πu, ${\mathrm{e}}^{3}{{\Sigma}}_{\mathrm{u}}^{+}$, ${\mathrm{h}}^{3}{{\Sigma}}_{\mathrm{g}}^{+}$, ${\mathrm{B}}^{\prime 1}{{\Sigma}}_{\mathrm{u}}^{+}$ and d3Πu excited electronic states are considered. Calculations are presented in both the fixed nuclei and adiabatic nuclei approximations, where the latter is shown only for the ${\mathrm{b}}^{3}{{\Sigma}}_{\mathrm{u}}^{+}$ state. Good agreement is found for all transitions presented. Where available, we compare with existing experimental and recommended data.
Microtearing Instability In The ITER Pedestal
Unstable microtearing modes are discovered by the GS2 gyrokinetic siimulation code, in the pedestal region of a simulated ITER H-mode plasma with approximately 400 WM DT fusion power. Existing nonlinear theory indicates that these instabilities should produce stochastic magnetic fields and broaden the pedestal. The resulted electron thermal conductivity is estimated and the implications of these findings are discussed.
Structural and electronic characterization of 355 nm laser-crystallized silicon: Interplay of film thickness and laser fluence
We present a detailed study of the laser crystallization of amorphous silicon thin films as a function of laser fluence and film thickness. Silicon films grown through plasma-enhanced chemical vapor deposition were subjected to a Q-switched, diode-pumped solid-state laser operating at 355 nm. The crystallinity, morphology, and optical and electronic properties of the films are characterized through transmission and reflectance spectroscopy, resistivity measurements, Raman spectroscopy, X-ray diffraction, atomic force microscopy, and optical and scanning-electron microscopy. Our results reveal a unique surface morphology that strongly couples to the electronic characteristics of the films, with a minimum laser fluence at which the film properties are optimized. A simple scaling model is used to relate film morphology to conductivity in the laser-processed films.