Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “electron microscopy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,693 records · Page 94

Understanding Li-K edge structure and interband transitions in Li{sub x}CoO{sub 2} by electron energy-loss spectroscopy

The authors clarified fine structures of Li-K edge of LiCoO{sub 2} reflecting core–hole effects, using monochromated transmission electron microscopy—electron energy-loss spectroscopy (TEM–EELS) and first-principles calculations. Variation of interband transitions into empty Co 3d states hybridized with O 2p states with decrease in x of Li{sub x}CoO{sub 2} was also presented. A reduced peak of interband transitions at 3.2 eV in low-loss EELS spectrum with decrease in x was related to reduction in the original empty Co e{sub g} states for LiCoO{sub 2} and appearance of empty bands just below the e{sub g} band.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Interface energetics and atomic structure of epitaxial La{sub 1−x}Sr{sub x}CoO{sub 3} on Nb:SrTiO{sub 3}

The energetics at oxide semiconductor/La{sub 1−x}Sr{sub x}CoO{sub 3} heterojunctions, including the respective alignment of the valence and conduction bands, govern charge transfer and have to be determined for the design of future La{sub 1−x}Sr{sub x}CoO{sub 3}-based devices. In this letter, the electronic and atomic structures of epitaxial La{sub 1−x}Sr{sub x}CoO{sub 3} on Nb-doped strontium titanate are revealed by scanning transmission electron microscopy, electron energy loss spectroscopy, and in situ x-ray and ultra violet photoelectron spectroscopies. For LaCoO{sub 3}, a valence band (VB) offset of 2.8 ± 0.1 eV is deduced. The large offset is attributed to the orbital contributions of the Co 3d states to the VB maximum of the LaCoO{sub 3} thin films, with no evidence of interface dipole contributions. The sensitivity of the valence band orbital character to spin state ordering and oxygen vacancies is assessed using density functional theory.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Synthesis of zirconium oxynitride in air under DC electric fields

We synthesized zirconium oxynitride from yttria-stabilized zirconia (YSZ) in air by applying DC electric fields that produced a controlled electric current in the specimen. When YSZ was heated under an applied DC electric field, the electric current of the specimen steeply increased at a critical temperature, called a flash event, during flash sintering. By keeping the electric current of the specimen constant during the flash event and then holding the specimen at the critical temperature, YSZ was transformed into zirconium oxynitride under the optimal conditions of 50 V/cm, 500 mA, and 1000 °C. We confirmed that zirconium oxynitride formed using high-resolution transmission electron microscopy, electron energy-loss spectroscopy, and energy-dispersive spectrometry. To convert oxides to nitrides, reducing conditions are necessary to form excess oxygen vacancies. Our technique produced the strong reducing conditions necessary to form nitrides from the oxides by delivering a controlled electric current to the specimen.

36 MATERIALS SCIENCE↗

Structure and mechanical properties of foils made of nanocrystalline beryllium

The phase composition and structural features of (45–90)-μm-thick foils obtained from nanocrystalline beryllium during multistep thermomechanical treatment have been established using electron microscopy, electron diffraction, electron backscattering diffraction, and energy-dispersive analysis. This treatment is shown to lead to the formation of a structure with micrometer- and submicrometer-sized grains. The minimum average size of beryllium grains is 352 nm. The inclusions of beryllium oxide (BeO) of different modifications with tetragonal (sp. gr. P4{sub 2}/mnm) and hexagonal (sp. gr. P6{sub 3}/mmc) lattices are partly ground during deformation to a size smaller than 100 nm and are located along beryllium grain boundaries in their volume, significantly hindering migration during treatment. The revealed structural features of foils with submicrometer-sized crystallites provide the thermal stability of their structural state. Beryllium with this structure is a promising material for X-ray instrument engineering and for the production of ultrathin (less than 10 μm) vacuum-dense foils with very high physicomechanical characteristics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of nanosized titania on the structure and properties of the composites based on butadienenitrile rubber

Nanocomposites based on butadienenitrile rubber (butadiene copolymer with 28% acrylonitrile) with functional titania nanoparticles of different nature have been obtained, and their complex study by X-ray diffractometry, small-angle X-ray scattering, scanning electron microscopy, electron probe X-ray microanalysis, and X-ray energy-dispersive spectroscopy has been performed. Differences in the morphology and composition of the surface and transverse cuts of nanocomposites in dependence of nanoparticle characteristics are established. It is found that the nanocomposites with the largest crystallite sizes have the lowest viscosity. It is also revealed that the nature of titania nanoparticles barely affects the vulcanization kinetics, and that the optimal vulcanization time for the composites is 25 min. Uniaxial extension tests have shown that nanocomposites with the best properties can be fabricated by introducing amorphous titania into the polymer (butadienenitrile rubber).

36 MATERIALS SCIENCE↗

Molecular-Beam Epitaxy of Two-Dimensional GaSe Layers on GaAs(001) and GaAs(112) Substrates: Structural and Optical Properties

The results of studies of the structural and optical properties of two-dimensional GaSe layers grown by molecular-beam epitaxy on GaAs(001) and GaAs(112) substrates using a valve cracking cell for the Se source are reported. The influence of the MBE growth parameters (the substrate temperature, Ga flux intensity, Se/Ga incident flux ratio) on the surface morphology of the layers is studied. By means of transmission electron microscopy, electron diffraction technique, and Raman spectroscopy, it is shown that the structure of the GaSe layers corresponds to the γ-GaSe polytype. From X-ray diffraction analysis, it is established that there exist α-Ga{sub 2}Se{sub 3} inclusions in the GaSe layers grown under conditions of high enrichment of the growth surface with Se.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Mineralogical characterization of arsenic in gold mine tailings from three sites in Nova Scotia

Chronic exposure to high concentrations of arsenic (As) in windblown and vehicle-raised dust from tailings sites in Nova Scotia poses a potential health risk to recreational users of these areas and to nearby residents. The exposure may involve inhalation of dust, as well as oral ingestion of particles. It is important to understand the mineralogy and morphology of As-bearing dust particles in order to evaluate the risk posed by near-surface particulates in As-bearing tailings fields, as this will influence the stability and toxicity of As in the wastes. Optical mineralogy, scanning electron microscopy, electron microprobe, X-ray diffraction, synchrotron-based micro-X-ray diffraction ({mu}XRD) and micro-X-ray absorption near edge structure ({mu}XANES), and sequential leach extractions were applied to tailings samples from three sites in eastern Nova Scotia. Arsenic occurs naturally in these gold deposits mainly in arsenopyrite (FeAsS). In the near-surface material of the tailings fields, sulphide minerals have almost completely oxidized to secondary minerals such as scorodite (FeAsO{sub 4}{center_dot}2H{sub 2}O) and Ca-Fe arsenates. Iron oxyhydroxides contain variable amounts of As{sub 2}O{sub 5} from trace to 30 wt.% and CaO up to 8 wt.%. The presence of multiple As-hosting solid phases, including relatively soluble Ca-Fe arsenates and Fe oxyhydroxides with adsorbed As has important implications for human health risk assessment and remediation design.

54 ENVIRONMENTAL SCIENCES↗

Kesterites and Chalcopyrites: A Comparison of Close Cousins; Preprint

Chalcopyrite solar cells based on CuInSe2 and associated alloys have demonstrated high efficiencies, with current annual shipments in the hundreds of megawatts (MW) range and increasing. Largely due to concern over possible indium (In) scarcity, a related set of materials, the kesterites, which comprise Cu2ZnSnS4 and associated alloys, has received increasing attention. Similarities anddifferences between kesterites and chalcopyrites are discussed as drawn from theory, depositions, and materials characterization. In particular, we discuss predictions from density functional theory, results from vacuum co-evaporation, and characterization via x-ray diffraction, scanning electron microscopy, electron beam-induced current, quantum efficiency, secondary ion mass spectroscopy, andluminescence.

14 SOLAR ENERGY↗

Cosmos 1887: morphology, histochemistry, and vasculature of the growing rat tibia

Light microscopy, electron microscopy, and enzyme histochemistry were used to study the effects of spaceflight on metaphyseal and cortical bone of the rat tibia. Cortical cross-sectional area and perimeter were not altered by a 12.5-day spaceflight in 3-month-old male rats. The endosteal osteoblast population and the vasculature near the periosteal surface in flight rats compared with ground controls showed more pronounced changes in cortical bone than in metaphyseal bone. The osteoblasts demonstrated greater numbers of transitional Golgi vesicles, possibly caused by a decreased cellular metabolic energy source, but no difference in the large Golgi saccules or the cell membrane-associated alkaline phosphatase activity. The periosteal vasculature in the diaphysis of flight rats often showed lipid accumulations within the lumen of the vessels, occasional degeneration of the vascular wall, and degeneration of osteocytes adjacent to vessels containing intraluminal deposits. These changes were not found in the metaphyseal region of flight animals. The focal vascular changes may be due to ischemia of bone or a developing fragility of the vessel walls as a result of spaceflight.

Non-NASA Center↗

Atomic and Electronic Structures of the SrVO3-LaAlO3 Interface

The atomic and electronic structures at interfaces in thin films are typically different from the bulk and are vitally important in determining the physical properties of thin films. The interface between SrVO{sub 3}, chosen as a prototype for vanadium-based perovskite materials in this work, and LaAlO{sub 3} substrate is investigated by scanning transmission electron microscopy, electron energy-loss spectroscopy, and theoretical multi-electron calculations. Extra electrons have been detected on the interface layer by comparing the energy-loss near-edge structures of V-L{sub 3,2} edges to those from the film far from the interface. Monochromated EELS and theoretical calculations for SrVO{sub 3}, VO{sub 2}, and V{sub 2}O{sub 3} support this conclusion. The extra electrons appear to originate from a change in the local bonding configuration of V at the La-O terminated substrate surface as determined by Z-contrast imaging.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Isomorphism and solid solutions among Ag- and Au-selenides

Au-Ag selenides were synthesized by heating stoichiometric mixtures of elementary substances of initial compositions Ag{sub 2−x}Au{sub x}Se with a step of x=0.25 (0≤x≤2) to 1050 °C and annealing at 500 °C. Scanning electron microscopy, optical microscopy, electron microprobe analysis and X-ray powder diffraction methods have been applied to study synthesized samples. Results of studies of synthesized products revealed the existence of three solid solutions with limited isomorphism Ag↔Au: naumannite Ag{sub 2}Se – Ag{sub 1.94}Au{sub 0.06}Se, fischesserite Ag{sub 3}AuSe{sub 2} - Ag{sub 3.2}Au{sub 0.8}Se{sub 2} and gold selenide AuSe - Au{sub 0.94}Ag{sub 0.06}Se. Solid solutions and AgAuSe phases were added to the phase diagram of Ag-Au-Se system. Crystal-chemical interpretation of Ag-Au isomorphism in selenides was made on the basis of structural features of fischesserite, naumannite, and AuSe. - Highlights: • Au-Ag selenides were synthesized. • Limited Ag-Au isomorphism in the selenides is affected by structural features. • Some new phases were introduced to the phase diagram Ag-Au-Se.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The microstructure of dislocation clusters in industrial directionally solidified multicrystalline silicon

The microstructure of commonly occurring dislocation patterns in industrial directionally solidified multicrystalline silicon has been systematically studied by light microscopy, electron backscatter diffraction, and transmission electron microscopy. The work has been focused on dislocation clusters on wafers near the top of cast blocks. In near {l_brace}111{r_brace} grain surface, dislocation arrays parallel to {l_brace}110{r_brace} plane traces are lying in parallel rows of {l_brace}111{r_brace} planes inclined to the surface, in mainly <112>30 deg. orientation. The dislocation configuration suggests that the microstructure may result from a recovery process. The dislocations formed during crystal growth and cooling have undergone transformations at high temperature in order to achieve low energy configurations for minimization of dislocation and crystal energy.

36 MATERIALS SCIENCE↗

Deformation textures of aluminum in a multilayered Ti/Al/Nb composite severely deformed by accumulative roll bonding

The accumulative roll bonding process was carried out to produce multilayered Ti/Al/Nb composites up to four cycles. Scanning electron microscopy, transmission electron microscopy electron backscattered diffraction and nanoindentation were employed to investigate the microstructural and texture evolution. A homogenous distribution of Ti/Nb necking layers in Al matrix was achieved after four ARB cycles. Grain refinement was observed to increase with increasing number of ARB cycles. The fraction of high-angle grain boundaries as also increased. Strong recrystallization texture appeared for high number of ARB cycles due to the adiabatic heat that occurs during ARB processing. The shear band at the Ti/Al interface reduced the intensity of the cold rolling fiber textures of Al. There was no evidence of shear component from the orientation distribution function results.

36 MATERIALS SCIENCE↗

Effect of Pulse Detonation-Plasma Technology Treatment on T8 Steel Microstructures

T8 steel surfaces were treated by pulse detonation-plasma technology (PDT) at capacitance values of 600, 800, and 1000 μF, and the effects of PDT were analyzed using x-ray diffraction, scanning electron microscopy, transmission electron microscopy, electron back-scattered diffraction, and micro-hardness tester and friction wear tester. The surface of T8 steel is first smoothed out, and then, craters are formed due to the inhomogeneity of the PDT energy and targeting during PDT treatment. The initial martensite in the T8 steel surface layer changes to austenite, and Fe{sub 3}N is formed due to nitriding. The thickness of the modified layer, which is composed of columnar and fine grain structures, increases with the increasing capacity. Preferential orientation occurred in the {110} 〈 001 〉 direction in the modified layer, and the number of low-angle grain boundaries increased significantly after PDT treatment. The micro-hardness and wear resistance of the T8 steel was improved by PDT treatment, even doubled after the treatment with the capacitance of 1000 μF.

36 MATERIALS SCIENCE↗

Control of Carbon Content in Steel by Introducing Proeutectoid Ferrite Transformation into Hot-Rolled Q&P Process

A processing strategy involving primary and secondary carbon partitioning is proposed for the hot-rolled quenching and partitioning process through the introduction of proeutectoid ferrite transformation after rolling. The microstructures of the steels were characterized using scanning electron microscopy, transmission electron microscopy, electron probe microanalysis, and x-ray diffraction, and the mechanical properties were evaluated using a universal tensile machine. The blocky retained austenite that distributed along the ferrite grain boundaries was promoted based on the coupling action of the primary and secondary carbon partitioning, which enhanced the transformation-induced plasticity effect during deformation despite the high carbon concentration. A ferrite formation temperature range of ~ 760 to 800 °C was proposed. In addition, from the perspective of industrialization, the observed ‘plateau trends’ for the retained austenite fraction and product of strength and elongation suggest the availability of a wide processing window of 215-362 °C for controlling the coiling temperature.

36 MATERIALS SCIENCE↗

Novel chemoresistive CH{sub 4} sensor with 10 ppm sensitivity based on multiwalled carbon nanotubes functionalized with SnO{sub 2} nanocrystals

Chemoresistive sensors based on multiwalled carbon nanotubes (MWCNTs) functionalized with SnO{sub 2} nanocrystals (NCs) have great potential for detecting trace gases at low concentrations (single ppm levels) at room temperature, because the SnO{sub 2} nanocrystals act as active sites for the chemisorption of gas molecules, and carbon nanotubes (CNTs) act as an excellent current carrying platform, allowing the adsorption of gas on SnO{sub 2} to modulate the resistance of the CNTs. However, uniform conjugation of SnO{sub 2} NCs with MWCNTs is challenging. An effective atomic layer deposition based approach to functionalize the surface of MWCNTs with SnO{sub 2} NCs, resulting in a novel CH{sub 4} sensor with 10 ppm sensitivity, is presented in this paper. Scanning electron microscopy, transmission electron microscopy (TEM), energy dispersive x-ray spectroscopy, and Raman spectroscopy were implemented to study the morphology, elemental composition, and the crystal quality of SnO{sub 2} functionalized MWCNTs. High resolution TEM images showed that the crystal quality of the functionalizing SnO{sub 2} NCs was of high quality with clear lattice fringes and the dimension almost three times smaller than shown thus far in literature. A lift-off based photolithography technique comprising bilayer photoresists was optimized to fabricate SnO{sub 2} functionalized MWCNTs-based chemoresistor sensor, which at room temperature can reliably sense below 10 ppm of CH{sub 4} in air. Such low level gas sensitivity, with significant reversible relative resistance change, is believed to be the direct result of the successful functionalization of the MWCNT surface by SnO{sub 2} NCs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Microstructure and Mechanical Characterization of Friction-Stir-Welded Dual-Phase Brass

Friction stir welding (FSW) is an ideal process to join brass to avoid the evaporation of zinc. In the present investigation, 6-mm-thick dual-phase brass plates were joined efficiently using FSW at various tool rotational speeds. The microstructures were studied using optical microscopy, electron backscattered diffraction and transmission electron microscopy. The optical micrographs revealed the evolution of various zones across the joint line. The microstructure of the heat-affected zone was similar to that of base metal. The weld zone exhibited finer grains due to dynamic recrystallization. The recrystallization was inhomogeneous and the inhomogeneity reduced with increased tool rotational speed. The dual phase was preserved in the weld zone due to the retention of zinc. The severe plastic deformation created a lot of dislocations in the weld zone. The weld zone was strengthened after welding. The role of tool rotational speed on the joint strength is further reported.

36 MATERIALS SCIENCE↗

CHARACTERIZATION OF DEFECTS IN ALLOY 152, 52 AND 52M WELDS

Defect distributions have been documented by optical metallography, scanning electron microscopy and electron backscatter diffraction in alloy 152 and 52 mockups welds, alloy 52 and 52M overlay mockups and an alloy 52M inlay. Primary defects were small cracks at grain boundaries except for more extensive cracking in the dilution zone of an alloy 52 overlay on 304SS. Detailed characterizations of the dilution zone cracks were performed by analytical transmission electron microscopy identifying grain boundary titanium-nitride precipitation associated with the intergranular separations. I. INTRODUCTION Weldments continue to be a primary location of stress-corrosion cracking (SCC) in light-water reactor systems. While problems related to heat-affected-zone (HAZ) sensitization and intergranular (IG) SCC of austenitic stainless alloys in boiling-water reactors (BWRs) have been significantly reduced, SCC has now been observed in HAZs of non-sensitized materials and in dissimilar metal welds where Ni-base alloy weld metals are used. IGSCC in weld metals has been observed in both BWRs and pressurized water reactors (PWRs) with recent examples for PWR pressure vessel penetrations producing the most concern. This has led to the replacement of alloy 600/182/82 welds with higher Cr, more corrosion-resistant replacement materials (alloy 690/152/52/52M). Complicating this issue has been a known susceptibility to cracking during welding [1-7] of these weld metals. There is a critical need for an improved understanding of the weld metal metallurgy and defect formation in Ni-base alloy welds to effectively assess long-term performance. A series of macroscopic to microscopic examinations were performed on available mockup welds made with alloy 52 or alloy 152 plus selected overlay and inlay mockups. The intent was to expand our understanding of weld metal structures in simulated LWR service components with a focus on as-welded defects. Microstructural features, defect distributions, defect characteristics and weld residual strains were examined by optical metallography, scanning electron microscopy, electron backscatter diffraction and transmission electron microscopy. Industry-supplied mock-up welds were characterized including alloy 52 and 152 weldments, alloy 52M overlay and inlay welds, and an alloy 52 overlay. II. WELDMENTS II.A. Alloy 52 and 152 Weld Mockups The alloy 52 and 152 weld mockups were fabricated by MHI for the Kewaunee reactor and were obtained from the EPRI NDE Center. The mockups were U-groove welds joining two plates of 304SS as shown in Figure 1. Alloy 152 butter (heat 307380) was placed on the U-groove surface for both mockups by shielded metal arc welding (SMAW). For the alloy 152 weld mockup, the alloy 152 fill (heat 307380) was also applied using SMAW while for the alloy 52 weld mockup, the alloy 52 fill (heat NX2686JK) was applied using gas tungsten arc welding (GTAW). Welding parameters for the fill materials were substantially different with the alloy 152 SMAW having a deposition speed of 4-25 cm/min with a current of 95-145 A and the alloy 52 GTAW having a deposition speed of 4-10 cm/min with a current of 150-300 A. One prominent feature in these mockup welds is the presence of a crack starting at the 304SS butt joint at the bottom of the U-groove and extending up into the weld. It appears that the 304SS plate on either side of the butt joint acted as an anchor for the weld resulting in a stress rise across the slit that drove crack formation and extension up into the fill weld. As will be shown in the next section, the extent of the cracking around this stress riser was much greater in the MHI 52 weld mockup.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗