Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “difference”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,693 records · Page 94

Determination of optical conductivity and different optical energy losses for non-crystalline Vanadyl tetra tert-butyl 2,3 Naphthalocyanine thinfilms

Amorphous Vanadyl Tetra Tert Butyl 2, 3 naphthalocyanine thin films (VTTBNc) have been deposited using Physical Vapor Deposition technique. By analyzing the X-ray diffraction, the structure of as deposited films is found to be non-crystalline. Different optical properties of these thin films have been investigated by means of optical absorption and reflection spectra. Various optical constants like band gap energy, E{sub g} the width of band tails of localized states into the gap, E{sub U} and steepness parameter, {beta} gets calculated and the variation of different optical parameters like refractive index, extinction coefficient, dielectric constants, optical conductivity and surface and volume energy losses with photon energy are estimated.

36 MATERIALS SCIENCE↗

Dust acoustic solitary waves in a dusty plasma with two kinds of nonthermal ions at different temperatures

The nonlinear dust acoustic solitary waves in a dusty plasma with two nonthermal ion species at different temperatures is studied analytically. Using reductive perturbation method, the Kadomtsev-Petviashivili (KP) equation is derived, and the effects of nonthermal coefficient, ions temperature, and ions number density on the amplitude and width of soliton in dusty plasma are investigated. It is shown that the amplitude of solitary wave of KP equation diverges at critical points of plasma parameters. The modified KP equation is also derived, and from there, the soliton like solutions of modified KP equation with finite amplitude is extracted. Results show that generation of rarefactive or compressive solitary waves strongly depends on the number and temperature of nonthermal ions. Results of KP equation confirm that for different magnitudes of ions temperature (mass) and number density, mostly compressive solitary waves are generated in a dusty plasma. In this case, the amplitude of solitary wave is decreased, while the width of solitary waves is increased. According to the results of modified KP equation for some certain magnitudes of parameters, there is a condition for generation of an evanescent solitary wave in a dusty plasma.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Different routes from a matter wavepacket to spatiotemporal chaos

We investigate the dynamics of a quasi-one-dimensional Bose-Einstein condensate confined in a double-well potential with spatiotemporally modulated interaction. A variety of phenomena is identified in different frequency regimes, including the self-compression, splitting, breathing-like, and near-fidelity of the matter wavepacket, which are associated with different routes for the onset of spatiotemporal chaos. The results also reveal that chaos can retain space-inversion symmetry of the system.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A finite-difference time-domain simulation of high power microwave generated plasma at atmospheric pressures

A finite-difference algorithm was developed to calculate several RF breakdown parameters, for example, the formative delay time that is observed between the initial application of a RF field to a dielectric surface and the formation of field-induced plasma interrupting the RF power flow. The analysis is focused on the surface being exposed to a background gas pressure above 50 Torr. The finite-difference algorithm provides numerical solutions to partial differential equations with high resolution in the time domain, making it suitable for simulating the time evolving interaction of microwaves with plasma; in lieu of direct particle tracking, a macroscopic electron density is used to model growth and transport. This approach is presented as an alternative to particle-in-cell methods due to its low complexity and runtime leading to more efficient analysis for a simulation of a microsecond scale pulse. The effect and development of the plasma is modeled in the simulation using scaling laws for ionization rates, momentum transfer collision rates, and diffusion coefficients, as a function of electric field, gas type and pressure. The incorporation of plasma material into the simulation involves using the Z-transform to derive a time-domain algorithm from the complex frequency-dependent permittivity of plasma. Therefore, the effect of the developing plasma on the instantaneous microwave field is calculated. Simulation results are compared with power measurements using an apparatus designed to facilitate surface flashover across a polycarbonate boundary in a controlled N{sub 2}, air, or argon environment at pressures exceeding 50 Torr.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Crystal growth behaviour in Au-ZnO nanocomposite under different annealing environments and photoswitchability

The growth of gold nanoparticles and ZnO nanorods in atom beam co-sputtered Au-ZnO nanocomposite (NC) system by annealing at two different ambient conditions is demonstrated in this work. Annealing in a furnace at 600 Degree-Sign C (air environment) confirmed the formation of ZnO nanorods surrounded with Au nanoparticles. In-situ annealing inside a transmission electron microscope (TEM) led to the formation of gold nanocrystals with different polygonal shapes. TEM micrographs were obtained in real time at intermediate temperatures of 300 Degree-Sign C, 420 Degree-Sign C, and 600 Degree-Sign C under vacuum. The growth mechanisms of Au nanocrystals and ZnO nanorods are discussed in the framework of Au-Zn eutectic and Zn-melting temperatures in vacuum and air, respectively. Current-voltage responses of Au-ZnO NC nanorods in dark as well as under light illumination have been investigated and photoswitching in Au-ZnO NC system is reported. The photoswitching has been discussed in terms of Au-ZnO band-diagram.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Gold nanoparticle formation in diamond-like carbon using two different methods: Gold ion implantation and co-deposition of gold and carbon

We describe work in which gold nanoparticles were formed in diamond-like carbon (DLC), thereby generating a Au-DLC nanocomposite. A high-quality, hydrogen-free DLC thin film was formed by filtered vacuum arc plasma deposition, into which gold nanoparticles were introduced using two different methods. The first method was gold ion implantation into the DLC film at a number of decreasing ion energies, distributing the gold over a controllable depth range within the DLC. The second method was co-deposition of gold and carbon, using two separate vacuum arc plasma guns with suitably interleaved repetitive pulsing. Transmission electron microscope images show that the size of the gold nanoparticles obtained by ion implantation is 3-5 nm. For the Au-DLC composite obtained by co-deposition, there were two different nanoparticle sizes, most about 2 nm with some 6-7 nm. Raman spectroscopy indicates that the implanted sample contains a smaller fraction of sp{sup 3} bonding for the DLC, demonstrating that some sp{sup 3} bonds are destroyed by the gold implantation.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Study And Comparison Of Silver Mirrors Deposited On Different Substrates By Electron-Beam Gun Method

Choosing the right substrate is one of the important factors for improving quality parameters of thin films such as adhesion between layers and substrates. The selected substrate should have proper physical and chemical compatibility with deposited thin film. In this paper, we have been investigated four different types of high reflective laser mirrors that were produced in similar conditions on four different kinds of substrates including copper, stainless steel, brass, and nickel. We used electron-beam gun method for deposition of silver layers. At the end we compared theoretical results with practical results that were yielded by laser damage threshold test. It was shown that brass is the best choice for silver metal mirrors as a substrate.

36 MATERIALS SCIENCE↗

Molecular origin of the difference in the HOH bend of the IR spectra between liquid water and ice

The intensity of the HOH bend in the IR spectrum of ice is significantly smaller than the corresponding one in liquid water. This difference in the IR intensities of the HOH bend in the two systems is investigated using MD simulations with the flexible, polarizable, ab-initio based TTM3-F model for water, a potential that correctly reproduces the experimentally observed increase of the HOH bend in liquid water and ice from the water monomer value. We have identified two factors that are responsible for the difference in the intensity of the HOH bend in liquid water and ice: (i) the decrease of the intensity of the HOH bend in ice caused by the strong anti-correlation between the permanent dipole moment of a molecule and the induced dipole moment of a neighboring hydrogen bond acceptor molecule and (ii) the weakening of this anti-correlation by the disordered hydrogen bond network in liquid water. The presence of the anti-correlation in ice is further confirmed by ab initio electronic structure calculations of water pentamer clusters extracted from the trajectories of the MD simulations for ice and liquid water.

Imoto, Sho↗

Monte Carlo study of electron-beam penetration and backscattering in multi-walled carbon nanotube materials: The effect of different scattering models

A systematic study of electron-beam penetration and backscattering in multi-walled carbon nanotube (MWCNT) materials for beam energies of {approx}0.3 to 30 keV is presented based on event-by-event Monte Carlo simulation of electron trajectories using state-of-the-art scattering cross sections. The importance of different analytic approximations for computing the elastic and inelastic electron-scattering cross sections for MWCNTs is emphasized. We offer a simple parameterization for the total and differential elastic-scattering Mott cross section, using appropriate modifications to the Browning formula and the Thomas-Fermi screening parameter. A discrete-energy-loss approach to inelastic scattering based on dielectric theory is adopted using different descriptions of the differential cross section. The sensitivity of electron penetration and backscattering parameters to the underlying scattering models is examined. Our simulations confirm the recent experimental backscattering data on MWCNT forests and, in particular, the steep increase of the backscattering yield at sub-keV energies as well as the sidewalls escape effect at high-beam energies.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Emission dynamics of an expanding ultrafast-laser produced Zn plasma under different ambient pressures

We report time and space resolved spectral measurements of neutral Zn emission from an ultrafast laser produced plasma, generated by the irradiation of a Zn target with laser pulses of 100 femtoseconds duration, carried out in a broad ambient pressure range of 0.05 to 100 Torr. The measurement is done for three different axial positions in the expanding plume. The spectra are rich in neutral Zn (Zn I) emissions at 334.5 nm, 468 nm, 472 nm, 481 nm, and 636 nm, respectively, depicting the characteristic triplet structure of Zn. Fast as well as slow peaks are observed in the time of flight data of 481 nm emission, which arise from recombination and atomic contributions, respectively, occurring at different time scales. Average speeds of the fast atomic species do not change appreciably with ambient pressure. The plasma parameters (electron temperature and number density) are evaluated from the measured optical emission spectra. The rates of ionization and recombination can be enhanced by a double-pulse excitation configuration in which optical energy is coupled to the ultrafast plasma through a delayed laser pulse.

36 MATERIALS SCIENCE↗

Effect of injected spins with different polarized orientations on the superconductivity of La{sub 0.7}Sr{sub 0.3}MnO{sub 3}/La{sub 1.85}Sr{sub 0.15}CuO{sub 4} thin films

The influence of spin-polarized quasi-particle injection on the superconductivity of epitaxial La{sub 0.7}Sr{sub 0.3}MnO{sub 3}/La{sub 1.85}Sr{sub 0.15}CuO{sub 4} composite thin films is systematically investigated. Different electrode configurations on the same specimen are designed to study the role of spin injection. It is found that the upper critical field and flux pinning potential are reduced by the spin injection, especially for the field parallel to ab-plane. The manipulation of superconductivity by the spin polarization orientations of injected quasi-particles possibly originates from the different suppressions on the superconducting pairing strength, which is considered to be related to the local antiferromagnetic spin fluctuations in La{sub 1.85}Sr{sub 0.15}CuO{sub 4}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Phase change in terahertz waves emitted from differently doped graphite: The role of carrier drift

We investigate characteristics of THz waves radiated from differently doped graphite samples excited by femtosecond laser pulses. Between n-type single-crystalline graphite and p-type polycrystalline graphite films, we observe the phase reversal of THz waves regardless of excitation energy variations around K-valley. In addition, variations in other parameters such as excitation fluence and azimuthal angle produce no changes in the phase of THz waves, which correlate well with the opposite dipole polarization between differently doped samples rather than unidirectional diffusive transport.

36 MATERIALS SCIENCE↗

Lateral spin valves with two-different Heusler-alloy electrodes on the same platform

Using room-temperature molecular beam epitaxy on Si(111), we demonstrate Heusler-alloy bilayers consisting of L2{sub 1}-Co{sub 2}FeSi (CFS) and D0{sub 3}-Fe{sub 3}Si (FS). By fabricating lateral spin valves with L2{sub 1}-CFS and D0{sub 3}-FS electrodes, we can see ideal spin signals even though we use one L2{sub 1}-CFS as a spin injector and another D0{sub 3}-FS as a spin detector. The difference in the spin absorption between L2{sub 1}-CFS and D0{sub 3}-FS can also be examined, and we find that the spin resistance of D0{sub 3}-FS is larger than that of L2{sub 1}-CFS. This work will be useful for understanding spin transport in lateral spin-valve devices with different Heusler-alloy electrodes.

36 MATERIALS SCIENCE↗

Difference of operation mechanisms in SWNTs network FETs studied via scanning gate microscopy

Field effect transistors (FETs) whose channel is composed of a network of single wall carbon nanotubes (SWNTs) have been studied to investigate the mechanism of the device operation via scanning gate microscopy (SGM) at room temperature. We observed different SGM response in networks of SWNTs either synthesized by CoMoCAT process or semiconducting enriched by density gradient ultracentrifuge process. In the former case, SGM response was observed at specific inter-tube junctions suggesting a Schottky junction formed with semiconducting and metallic SWNTs in the network. In contrast, multiple concentric rings in the SGM response are observed within the tubes in a network of the latter SWNTs suggesting a possibility of quantum mechanical transport at room-temperature. Different type of SGM responses are confirmed in the two kinds of SWNTs networks, nevertheless such active positions would likely have an important role in the FET operation mechanism in each network.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Ab initio study of irradiation tolerance for different M{sub n+1}AX{sub n} phases: Ti{sub 3}SiC{sub 2} and Ti{sub 3}AlC{sub 2}

Layered ternary M{sub n+1}AX{sub n} (MAX) materials are recently proposed to be promising candidates for future fission and fusion programmes because of their unique properties inherited from both ceramics and metals. However, different M{sub n+1}AX{sub n} materials demonstrate different behaviors when exposed to energetic neutron or ion irradiations. Based on first-principles calculations, we have investigated the irradiation tolerance of two typical M{sub n+1}AX{sub n} materials: Ti{sub 3}SiC{sub 2} and Ti{sub 3}AlC{sub 2} from two aspects. First, we make a detailed analysis on the interatomic bonding characters, which are believed to be responsible for the resistance to radiation-induced amorphization. Second, the formation energies of various intrinsic and antisite defects in these two compounds are calculated in order to elucidate their amorphization mechanism. Our results show that the absence of orbitals overlap of Al-C in Ti{sub 3}AlC{sub 2} renders it more resistant to amorphization compared to Ti{sub 3}SiC{sub 2}. In addition, the antisite defects Al{sub Ti(1)} and Al{sub Ti(2)} in Ti{sub 3}AlC{sub 2} have much lower formation energies compared to Si{sub Ti(1)} and Si{sub Ti(2)} in Ti{sub 3}SiC{sub 2}, which implies that the replacement of Ti with Al is easier than Si, thus providing an alternative way to accommodate the defects resulted from irradiation damage cascades. These results indicate that Ti{sub 3}AlC{sub 2} is more irradiation tolerant than Ti{sub 3}SiC{sub 2}, in accordance with experimental observations. Our results have profound implications for the choice of appropriate MAX phase with best performance to be used in next reaction reactors.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Direct comparison of graphene devices before and after transfer to different substrates

The entire graphene field-effect-transistor devices first fabricated on SiO{sub 2}/Si are peeled from the surface and placed on a different wafer. Both longitudinal and transverse resistivity measurements of the devices before and after the transfer are measured to calculate the mobility for a direct comparison. After transferred to different SiO{sub 2}/Si wafers, the mobility, generally, is comparable, and the defect density does not show any significant increase, which indicates the degradation due to the transfer process itself is minimal. The same method can be applied to transfer graphene devices to any arbitrary substrates (e.g., SrTiO{sub 3} or STO). The transfer method developed here not only eliminates the need to locate single-layer graphene on non-SiO{sub 2}/Si substrates for patterning but also provides a convenient way to study the effects of various substrates on graphene electronic properties.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Comparative study of laminar and turbulent flow model with different operating parameters for radio frequency-inductively coupled plasma torch working at 3 MHz frequency at atmospheric pressure

This paper provides 2D comparative study of results obtained using laminar and turbulent flow model for RF (radio frequency) Inductively Coupled Plasma (ICP) torch. The study was done for the RF-ICP torch operating at 50 kW DC power and 3 MHz frequency located at BARC. The numerical modeling for this RF-ICP torch is done using ANSYS software with the developed User Defined Function. A comparative study is done between laminar and turbulent flow model to investigate how temperature and flow fields change when using different operating conditions such as (a) swirl and no swirl velocity for sheath gas flow rate, (b) variation in sheath gas flow rate, and (c) variation in plasma gas flow rate. These studies will be useful for different material processing applications.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Inhomogeneous distribution of defect-related emission in Si-doped AlGaN epitaxial layers with different Al content and Si concentration

The spatial distribution of luminescence in Si-doped AlGaN epitaxial layers that differ in Al content and Si concentration has been studied by cathodoluminescence (CL) mapping in combination with scanning electron microscopy. The density of surface hillocks increased with decreasing Al content and with increasing Si concentration. The mechanisms giving rise to those hillocks are likely different. The hillocks induced surface roughening, and the compositional fluctuation and local donor-acceptor-pair (DAP) emission at hillock edges in AlGaN epitaxial layers were enhanced irrespective of the origin of the hillocks. The intensity of local DAP emission was related to Si concentration, as well as to hillock density. CL observation revealed that DAP emission areas were present inside the samples and were likely related to dislocations concentrated at hillock edges. Possible candidates for acceptors in the observed DAP emission that are closely related in terms of both Si concentration and hillock edges with large deformations are a V{sub III}-Si{sub III} complex and Si{sub N}, which are unfavorable in ordinary III-nitrides.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗