Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “desorption”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,693 records · Page 94

Effect of processing hydrogen pressure on magnetic properties of HDDR Nd-Fe-B magnet

High coercivity and anisotropic Nd-Fe-B powders for making anisotropic bonded magnets have been prepared by hydrogenation-disproportionation-desorption-recombination (HDDR). In this work, we found that the processing hydrogen pressure is intimately correlated with the formation of c-axis crystal texture of Nd 2 Fe 14 B phase. There exists a critical hydrogen pressure, P crit , during hydrogen-disproportionation stage, that promotes the formation of c-axis crystal texture. When processing hydrogen pressure is higher than P crit , the formation of c-axis texture deteriorates and results in isotropic Nd-Fe-B magnetic powders. The existence of P crit is ascribed to the thermodynamics and kinetics origin during HDDR process.

36 MATERIALS SCIENCE↗

Fast and smooth etching of indium tin oxides in BCl{sub 3}/Cl{sub 2} inductively coupled plasmas

The etching characteristics of evaporation-deposited indium tin oxide (ITO) films in BCl{sub 3}/Cl{sub 2} inductively coupled plasmas have been studied. High etch rates >200 nm/min were obtained at large BCl{sub 3}/Cl{sub 2} gas flow ratios and high rf chuck powers, suggesting that the etching process is limited by sputter desorption of InCl{sub x} and SnCl{sub x} compounds. The addition of a small amount of CF{sub 4}, which acts as reducing agent, increased the etch rate by 30% and resulted in very smooth etched surfaces. It has also been found that the material crystallinity has a pronounced influence on ITO etch rate. ITO films annealed at 500 deg. C exhibited the maximum etch resistance.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

{beta}-Ga{sub 2}O{sub 3} growth by plasma-assisted molecular beam epitaxy

The authors demonstrate the heteroepitaxial and homoepitaxial growth of single crystalline {beta}-Ga{sub 2}O{sub 3} by plasma-assisted molecular beam epitaxy. Phase-pure (201) and (100) {beta}-Ga{sub 2}O{sub 3} thin films were grown on c-plane sapphire and (100) {beta}-Ga{sub 2}O{sub 3} substrates, respectively. Based on the homoepitaxial results, detailed information is reported on the dependence between the {beta}-Ga{sub 2}O{sub 3} film quality and various growth parameters. At an optimized growth temperature of 700 deg. C, a growth relationship between growth rates and increasing gallium fluxes was established at a fixed oxygen pressure. A three-dimensional columnar growth with a relatively high growth rate was measured at a low gallium flux while a terrace surface morphology with a reduced growth rate was observed as the gallium flux increased. The gallium flux played an important role on both surface morphology and growth rate. We associated the decreasing growth rate with increasing gallium flux with the formation of gallium suboxides monitored by quadrupole mass spectrometry. The formation and desorption of volatile gallium suboxides limited the resulting growth rate of {beta}-Ga{sub 2}O{sub 3} growth.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Surface three-dimensional velocity map imaging: A new technique for the study of photodesorption dynamics

The authors describe the application of a combination of velocity map imaging and time-of-flight (TOF) techniques to obtain three-dimensional velocity distributions for surface photodesorption. They have established a systematic alignment procedure to achieve correct and reproducible experimental conditions. It includes four steps: (1) optimization of the velocity map imaging ion optics' voltages to achieve optimum velocity map imaging conditions; (2) alignment of the surface normal with the symmetry axis (ion flight axis) of the ion optics; (3) determination of TOF distance between the surface and the ionizing laser beam; (4) alignment of the position of the ionizing laser beam with respect to the ion optics. They applied this set of alignment procedures and then measured Br({sup 2}P{sub 3/2}) (Br) and Br({sup 2}P{sub 1/2}) (Br*) atoms photodesorbing from a single crystal of KBr after exposure to 193 nm light. They analyzed the velocity flux and energy flux distributions for motion normal to the surface. The Br* normal energy distribution shows two clearly resolved peaks at approximately 0.017 and 0.39 eV, respectively. The former is slightly faster than expected for thermal desorption at the surface temperature and the latter is hyperthermal. The Br normal energy distribution shows a single broad peak that is likely composed of two hyperthermal components. The capability that surface three-dimensional velocity map imaging provides for measuring state-specific velocity distributions in all three dimensions separately and simultaneously for the products of surface photodesorption or surface reactions holds great promise to contribute to our understanding of these processes.

74 ATOMIC AND MOLECULAR PHYSICS↗

Influence of temperature on the hydrogenated amorphous carbon films prepared by plasma-enhanced chemical vapor deposition

Hydrogenated amorphous carbon (a-C:H) films were deposited in a plasma-enhanced chemical vapor deposition (PECVD) system. The substrate temperature at deposition was found to have significant effects on the film stoichiometry, sp{sup 2} phase, and optical properties. Raman spectroscopy reveals an increase in sp{sup 2}-bonded carbon and a continual structure ordering of the sp{sup 2} phase with increasing substrate temperature at deposition. Thermal desorption spectroscopy analysis revealed that the onset temperature of CH{sub 4} effusion of PECVD a-C:H films increase with increasing substrate temperatures, implicating enhanced structural stability via elevating the substrate temperature at deposition. The extinction coefficient k measured from spectroscopic ellipsometry gradually increases with increasing substrate temperature at deposition, due possibly to the graphitization effect which decreases the optical gap resulting in higher k.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Laboratory investigations of irradiated acetonitrile-containing ices on an interstellar dust analog

Reflection-absorption infrared spectroscopy is used to study the impact of low-energy electron irradiation of acetonitrile-containing ices, under conditions close to those in the dense star-forming regions in the interstellar medium. Both the incident electron energy and the surface coverage were varied. The experiments reveal that solid acetonitrile is desorbed from its ultrathin solid films with a cross section of the order of 10{sup -17} cm{sup 2}. Evidence is presented for a significantly larger desorption cross section for acetonitrile molecules at the water-ice interface, similar to that previously observed for the benzene-water system.

36 MATERIALS SCIENCE↗

Tracking electron-induced carbon contamination and cleaning of Ru surfaces by Auger electron spectroscopy

Extreme ultraviolet (EUV) radiation induced growth of carbon and oxygen desorption were investigated on a Ru surface by Auger electron spectroscopy (AES) in the presence and absence of additional photoelectrons (PEs) from a focusing Ru mirror. A decrease in EUV reflectivity with carbon growth in the presence of additional PEs has been observed. Conversely, a carbonaceous Ru surface was cleaned in sequential AES, and discussed in terms of secondary electron assisted dissociation of residual hydrocarbons and water molecules, followed by a chemical reaction between adsorbed carbon and oxygen atoms.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Degassing a vacuum system with in-situ UV radiation

Photon-stimulated desorption (PSD) from a high-powered ultraviolet source was investigated as a technique to degas a vacuum system. A stainless steel vacuum system was pumped down from atmosphere with different time doses of 185 nm light, and the resulting outgassing rates were compared to that of a control pumpdown without UV assistance. PSD was found to provide a factor of 2 advantage in pumpdown pressure after only 30 min of UV exposure, with no additional advantage observed for longer irradiation times. Specifically, an outgassing rate of 3 Multiplication-Sign 10{sup -10} Torr L s{sup -1} cm{sup -2} was reached 3 h sooner in pumpdowns with UV assistance compared to those without UV, while a rate of 1.2 Multiplication-Sign 10{sup -10} Torr L s{sup -1} cm{sup -2} was reached 16 h sooner in UV runs. The authors calculated that about 22 monolayers of water were desorbed after 30 min of UV exposure. The results indicate that PSD by a 40 W 185 nm UV source can serve as a nonthermal technique to significantly speed the pumpdown of a vacuum system from atmosphere after only 30 min.

36 MATERIALS SCIENCE↗

Reflection high-energy electron diffraction evaluation of thermal deoxidation of chemically cleaned Si, SiGe, and Ge layers for solid-source molecular beam epitaxy

The authors present a study on the thermal evolution of the reflection high-energy electron diffraction pattern of chemically cleaned (001)-oriented Si, Ge, and SiGe surfaces, associating observed changes in the reconstructions with the desorption of known residual contaminants for Si and Ge surfaces. The implications of residual oxides prior to epitaxy on stacking fault densities in the grown films are presented. Further evidence for the two-phase nature of oxides on SiGe surfaces is provided, demonstrating that it is necessary to heat a SiGe surface up to the thermal deoxidation temperature of a Si surface to obtain stacking fault-free growth.

36 MATERIALS SCIENCE↗

Investigation of arsenic and antimony capping layers, and half cycle reactions during atomic layer deposition of Al{sub 2}O{sub 3} on GaSb(100)

In-situ monochromatic x-ray photoelectron spectroscopy, low energy electron diffraction, ion scattering spectroscopy, and transmission electron microscopy are used to examine the GaSb(100) surfaces grown by molecular beam epitaxy after thermal desorption of a protective As or Sb layer and subsequent atomic layer deposition (ALD) of Al{sub 2}O{sub 3}. An antimony protective layer is found to be more favorable compared to an arsenic capping layer as it prevents As alloys from forming with the GaSb substrate. The evolution of oxide free GaSb/Al{sub 2}O{sub 3} interface is investigated by “half-cycle” ALD reactions of trimethyl aluminum and deionized water.

36 MATERIALS SCIENCE↗

Molecular beam epitaxy growth of SnO{sub 2} using a tin chemical precursor

The authors report on the development of a molecular beam epitaxy approach for atomic layer controlled growth of phase-pure, single-crystalline epitaxial SnO{sub 2} films with scalable growth rates using a highly volatile precursor (tetraethyltin) for tin and rf-oxygen plasma for oxygen. Smooth, epitaxial SnO{sub 2} (101) films on r-sapphire (101{sup ¯}2) substrates were grown as a function of tin precursor flux and substrate temperatures between 300 and 900 °C. Three distinct growth regimes were identified where SnO{sub 2} films grew in a reaction-, flux-, and desorption-limited mode, respectively, with increasing substrate temperature. In particular, with increasing tin flux, the growth rates were found to increase and then saturate indicating any excess tin precursor desorbs above a critical beam equivalent pressure of tin precursor. Important implications of growth kinetic behaviors on the self-regulating stoichiometric growth of perovskite stannates are discussed.

36 MATERIALS SCIENCE↗

Mechanistic study of atomic layer deposition of Al{sub x}Si{sub y}O thin film via in-situ FTIR spectroscopy

A study of surface reaction mechanism on atomic layer deposition (ALD) of aluminum silicate (Al{sub x}Si{sub y}O) was conducted with trimethylaluminum (TMA) and tetraethoxysilane (TEOS) as precursors and H{sub 2}O as the oxidant. In-situ Fourier transform infrared spectroscopy (FTIR) was utilized to elucidate the underlying surface mechanism that enables the deposition of Al{sub x}Si{sub y}O by ALD. In-situ FTIR study revealed that ineffective hydroxylation of the surface ethoxy (–OCH{sub 2}CH{sub 3}) groups prohibits ALD of SiO{sub 2} by TEOS/H{sub 2}O. In contrast, effective desorption of the surface ethoxy group was observed in TEOS/H{sub 2}O/TMA/H{sub 2}O chemistry. The presence of Al-OH* group in vicinity of partially hydroxylated ethoxy (–OCH{sub 2}CH{sub 3}) group was found to propagate disproportionation reaction, which results in ALD of Al{sub x}Si{sub y}O. The maximum thickness from incorporation of SiO{sub x} from alternating exposures of TEOS/H{sub 2}O chemistry in Al{sub x}Si{sub y}O was found to be ∼2 Å, confirmed by high resolution transmission electron microscopy measurements.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Implementation of atomic layer etching of silicon: Scaling parameters, feasibility, and profile control

Atomic or layer by layer etching of silicon exploits temporally segregated self-limiting adsorption and material removal steps to mitigate the problems associated with continuous or quasicontinuous (pulsed) plasma processes: selectivity loss, damage, and profile control. Successful implementation of atomic layer etching requires careful choice of the plasma parameters for adsorption and desorption steps. This paper illustrates how process parameters can be arrived at through basic scaling exercises, modeling and simulation, and fundamental experimental tests of their predictions. Using chlorine and argon plasma in a radial line slot antenna plasma source as a platform, the authors illustrate how cycle time, ion energy, and radical to ion ratio can be manipulated to manage the deviation from ideality when cycle times are shortened or purges are incomplete. Cell based Monte Carlo feature scale modeling is used to illustrate profile outcomes. Experimental results of atomic layer etching processes are illustrated on silicon line and space structures such that iso-dense bias and aspect ratio dependent free profiles are produced. Experimental results also illustrate the profile control margin as processes move from atomic layer to multilayer by layer etching. The consequence of not controlling contamination (e.g., oxygen) is shown to result in deposition and roughness generation.

42 ENGINEERING↗

Adsorption of n-butane on graphene/Ru(0001)—A molecular beam scattering study

Adsorption kinetics/dynamics of n-butane on graphene, physical vapor deposited on Ru(0001) (hereafter G/Ru), and bare Ru(0001) (hereafter Ru) are discussed. The chemical activity of the supported-graphene as well as the support was probed by thermal desorption spectroscopy (adsorption kinetics). In addition and to the best of our knowledge, for the first time, molecular beam scattering data of larger molecules were collected for graphene (probing the adsorption dynamics). Furthermore, samples were inspected by x-ray photoelectron spectroscopy and Auger electron spectroscopy. At the measuring conditions used here, n-butane adsorption kinetics/dynamics are molecular and nonactivated. Binding energies of butane on Ru and G/Ru are indistinguishable within experimental uncertainty. Thus, G/Ru is “kinetically transparent.” Initial adsorption probabilities, S{sub 0}, of n-butane decrease with increasing impact energy (0.76–1.72 eV) and are adsorption temperature independent for both Ru and G/Ru, again consistent with molecular adsorption. Also, S{sub 0} of Ru and G/Ru are indistinguishable within experimental uncertainty. Thus, G/Ru is “dynamically transparent.” Coverage dependent adsorption probabilities indicate precursor effects for graphene/Ru.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Thermal atomic layer etching of crystalline aluminum nitride using sequential, self-limiting hydrogen fluoride and Sn(acac){sub 2} reactions and enhancement by H{sub 2} and Ar plasmas

Thermal atomic layer etching (ALE) of crystalline aluminum nitride (AlN) films was demonstrated using sequential, self-limiting reactions with hydrogen fluoride (HF) and tin(II) acetylacetonate [Sn(acac){sub 2}] as the reactants. Film thicknesses were monitored versus number of ALE reaction cycles at 275 °C using in situ spectroscopic ellipsometry (SE). A low etch rate of ∼0.07 Å/cycle was measured during etching of the first 40 Å of the film. This small etch rate corresponded with the AlO{sub x}N{sub y} layer on the AlN film. The etch rate then increased to ∼0.36 Å/cycle for the pure AlN films. In situ SE experiments established the HF and Sn(acac){sub 2} exposures that were necessary for self-limiting surface reactions. In the proposed reaction mechanism for thermal AlN ALE, HF fluorinates the AlN film and produces an AlF{sub 3} layer on the surface. The metal precursor, Sn(acac){sub 2}, then accepts fluorine from the AlF{sub 3} layer and transfers an acac ligand to the AlF{sub 3} layer in a ligand-exchange reaction. The possible volatile etch products are SnF(acac) and either Al(acac){sub 3} or AlF(acac){sub 2}. Adding a H{sub 2} plasma exposure after each Sn(acac){sub 2} exposure dramatically increased the AlN etch rate from 0.36 to 1.96 Å/cycle. This enhanced etch rate is believed to result from the ability of the H{sub 2} plasma to remove acac surface species that may limit the AlN etch rate. The active agent from the H{sub 2} plasma is either hydrogen radicals or radiation. Adding an Ar plasma exposure after each Sn(acac){sub 2} exposure increased the AlN etch rate from 0.36 to 0.66 Å/cycle. This enhanced etch rate is attributed to either ions or radiation from the Ar plasma that may also lead to the desorption of acac surface species.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Flexible atomic layer deposition system for coating porous materials

In this paper, we describe an atomic layer deposition (ALD) system that is optimized for the growth of thin films on high-surface-area, porous materials. The system incorporates a moveable dual-zone furnace allowing for rapid transfer of a powder substrate between heating zones whose temperatures are optimized for precursor adsorption and oxidative removal of the precursor ligands. The reactor can both be evacuated, eliminating the need for a carrier gas during precursor exposure, and rotated, to enhance contact between a powder support and the gas phase, both of which help us to minimize mass transfer limitations in the pores during film growth. The capabilities of the ALD system were demonstrated by growing La 2 O 3 , Fe 2 O 3 , and LaFeO 3 films on a 120 m 2 g -1 MgAl 2 O 4 powder. Analysis of these films using scanning transmission electron microscopy and temperature-programmed desorption of 2-propanol confirmed the conformal nature of the oxide films.

36 MATERIALS SCIENCE↗

Thermodynamics and kinetics of adsorption of atoms and molecules by carbon nanotubes

Thermodynamics and kinetics of adsorption of atoms and molecules by carbon nanotubes are investigated. Expressions are derived that can be used to perform calculations taking into account various external factors and interactions and, therefore, analyze both physical and chemical adsorption processes and determine its thermodynamic parameters. A mathematical model is developed that makes it possible to find parameters of desorption kinetics separately for molecules adsorbed at different locations and reduce possible systematic errors in analysis of experimental results. Theoretical models are validated by analyzing physical and chemical adsorption of hydrogen and physical adsorption of oxygen.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Impurity transport in the model of a dual-porosity regularly heterogeneous medium with colloids

The problem of impurity advection in a channel surrounded by a weakly permeable medium with drifting colloidal particles present in the channel is solved. A regime in which the front of the impurity cloud moves with a constant velocity and the concentration behind the front decreases as a power law is established due to the impurity adsorption on colloids and its diffusive exchange with the matrix on moderate time scales. On long time scales, the transport in the channel is quasi-diffusive as a result of the impurity desorption and its eventual escape into the matrix.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗