SEARCH · Engineering Papers

Results for “data driven modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,693 records · Page 94

All sources NASA NTRS DOE OSTI

DOE OSTI2025

Regime-based aerosol–cloud interactions from CALIPSO-MODIS and the Energy Exascale Earth System Model version 2 (E3SMv2) over the Eastern North Atlantic

This study investigates aerosol-cloud interactions in marine boundary layer (MBL) clouds using an advanced deep-learning-driven synoptic-regime-based framework, combining satellite data (CALIPSO vertically resolved aerosol extinction and MODIS cloud properties) with 1° nudged Energy Exascale Earth System Model version 2 (E3SMv2) simulation over the Eastern North Atlantic (ENA; ∼10°×10°, 2006–2014). The E3SMv2 captures observed seasonal variations in cloud droplet number concentrations (N d ) and liquid water path (LWP), though it systematically underestimates N d . We then partition ENA meteorology into four synoptic regimes (Pre-Trough, Post-Trough, Ridge, Trough) via a deep-learning clustering of ERA5 reanalysis fields, enabling regime-dependent aerosol-cloud interactions analyses. Both satellite and E3SMv2 exhibit an inverted-V LWP-N d relationship. In Post-Trough and Ridge regimes, the satellite shows stronger negative LWP-N d sensitivities than in Pre-Trough regime. The Trough regime displays a muted satellite LWP response. In comparison, the model predicts more exaggerated LWP responses across regimes, with LWP increasing too quickly at low N d and decreasing more sharply at high N d , especially in Pre-Trough and Trough regimes. These exaggerated model LWP sensitivities may stem from uncertainties in representing drizzle processes, entrainment, and turbulent mixing. As for N d susceptibility to aerosols, N d increases with MBL aerosol extinction in both datasets, but the simulated aerosol-cloud interactions appear oversensitive to meteorological conditions. Overall, E3SMv2 better captures aerosol effects under regimes that favor stratiform clouds (Post-Trough, Ridge), but performance deteriorates for regimes with deeper, dynamically complex clouds (Trough), highlighting the need for improved representations of those cloud processes in climate models.

Environmental sciences↗

NASA NTRSDate not supplied

Prediction of Aircraft Estimated Time of Arrival Using A Supervised Learning Approach

We present a novel data-driven approach for prediction of the estimated time of arrival (ETA) of aircraft in the terminal area via the implementation of a Random Forest regression model. The model uses data fused from a number of sources (flight track, weather, flight plan information, etc.) and provides predictions for the remaining flight time for aircraft landing at Dallas/Fort Worth (DFW) International Airport. The predictions are made when the aircraft is at a distance of 200-miles from the airport. The results show that the model is able to predict estimated time of arrival to within ± 5 min for 90% of the flights in the test data with the mean absolute error being lower at 145 seconds. This paper covers the entire pipeline of data collection, preprocessing, setup and training of the ML model, and the results obtained for DFW.

Machine learning↗

DOE OSTI2024

Recent increases in annual, seasonal, and extreme methane fluxes driven by changes in climate and vegetation in boreal and temperate wetland ecosystems

Climate warming is expected to increase global methane (CH 4 ) emissions from wetland ecosystems. Although in situ eddy covariance (EC) measurements at ecosystem scales can potentially detect CH 4 flux changes, most EC systems have only a few years of data collected, so temporal trends in CH 4 remain uncertain. Here, we use established drivers to hindcast changes in CH 4 fluxes (FCH 4 ) since the early 1980s. We trained a machine learning (ML) model on CH 4 flux measurements from 22 [methane-producing sites] in wetland, upland, and lake sites of the FLUXNET-CH 4 database with at least two full years of measurements across temperate and boreal biomes. The gradient boosting decision tree ML model then hindcasted daily FCH 4 over 1981-2018 using meteorological reanalysis data. We found that, mainly driven by rising temperature, half of the sites (n = 11) showed significant increases in annual, seasonal, and extreme FCH 4 , with increases in FCH 4 of ca. 10% or higher found in the fall from 1981–1989 to 2010–2018. The annual trends were driven by increases during summer and fall, particularly at high-CH 4 -emitting fen sites dominated by aerenchymatous plants. We also found that the distribution of days of extremely high FCH 4 (defined according to the 95th percentile of the daily FCH 4 values over a reference period) have become more frequent during the last four decades and currently account for 10–40% of the total seasonal fluxes. The share of extreme FCH 4 days in the total seasonal fluxes was greatest in winter for boreal/taiga sites and in spring for temperate sites, which highlights the increasing importance of the non-growing seasons in annual budgets. Our results shed light on the effects of climate warming on wetlands, which appears to be extending the CH 4 emission seasons and boosting extreme emissions.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2020

Turbulence model reduction by deep learning

A defining problem of turbulence theory is to produce a predictive model for turbulent fluxes. These have profound implications for virtually all aspects of the turbulence dynamics. In magnetic confinement devices, drift-wave turbulence produces anomalous fluxes via cross-correlations between fluctuations. In this work, we introduce an alternative, data-driven method for parametrizing these fluxes. The method uses deep supervised learning to infer a reduced mean-field model from a set of numerical simulations. We apply the method to a simple drift-wave turbulence system and find a significant new effect which couples the particle flux to the local gradient of vorticity. Notably, here, this effect is much stronger than the oft-invoked shear suppression effect. We also recover the result via a simple calculation. The vorticity gradient effect tends to modulate the density profile. In addition, our method recovers a model for spontaneous zonal flow generation by negative viscosity, stabilized by nonlinear and hyperviscous terms. We highlight the important role of symmetry to implementation of the new method.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2020

A learning-based time-efficient framework for building energy performance evaluation

Not Available

Bhattacharya, Saptarshi↗

DOE OSTI2025

Autonomous Synthesis and Inverse Design of Electrochromic Polymers with High Efficiency and Accuracy

Here, the design and synthesis of functional polymers, aimed at targeted properties through specific structures, have long been challenged by their complex and often nonlinear structure–property relationships. Key processes, including knowledge accumulation for predictive design and experimental refinement and validation, are traditionally labor-insensitive and time-consuming, making it difficult to balance accuracy and efficiency. Here, we introduce an accelerated, autonomous system for the on-demand synthesis of electronic polymers that achieves the desired electrochromic functionality with high accuracy and efficiency. Our approach leverages large language model-assisted data mining, a physics-informed copolymer machine learning model, and an AI-driven autonomous robotic workflow in the Polybot lab. Within 72 h, Polybot autonomously synthesized electrochromic polymers (ECPs) with targeted, previously-unreported color values, including green polymers with specific absorption profiles, precisely fine-tuning copolymer structures with a 5% step size in comonomer composition within a three-monomer system. A publicly accessible ECP informatics database has also been created to foster knowledge exchange.

AI-driven Robotic Lab↗

DOE OSTI2023

Tools for estimating fake/non-prompt lepton backgrounds with the ATLAS detector at the LHC

Measurements and searches performed with the ATLAS detector at the CERN LHC often involve signatures with one or more prompt leptons. Such analyses are subject to 'fake/non-prompt' lepton backgrounds, where either a hadron or a lepton from a hadron decay or an electron from a photon conversion satisfies the prompt-lepton selection criteria. These backgrounds often arise within a hadronic jet because of particle decays in the showering process, particle misidentification or particle interactions with the detector material. As it is challenging to model these processes with high accuracy in simulation, their estimation typically uses data-driven methods. Three methods for carrying out this estimation are described, along with their implementation in ATLAS and their performance.

47 OTHER INSTRUMENTATION↗

DOE OSTI2020

Detection and Diagnosis of Data Integrity Attacks in Solar Farms Based on Multilayer Long Short-Term Memory Network

Photovoltaic (PV) systems are becoming more vulnerable to cyber threats. In response to this emerging concern, developing cyber-secure power electronics converters has received increased attention from the IEEE Power Electronics Society that recently launched a cyber-physical-security initiative. Here this letter proposes a deep sequence learning based diagnosis solution for data integrity attacks on PV systems in smart grids, including dc–dc and dc–ac converters. The multilayer long short-term memory networks are used to leverage time-series electric waveform data from current and voltage sensors in PV systems. The proposed method has been evaluated in a PV smart grid benchmark model with extensive quantitative analysis. As a comparison, we have evaluated classic data-driven methods, including K-nearest neighbor, decision tree, support vector machine, artificial neural network, and convolutional neural network. Comparison results verify performances of the proposed method for detection and diagnosis of various data integrity attacks on PV systems.

42 ENGINEERING↗

DOE OSTI2024

Evaluating Physics Informed Neural Network Performance for Seismic Discrimination Between Earthquake

This package contains the code for the paper Evaluating Physics Informed Neural Network Performance for Seismic Discrimination Between Earthquake published at Seismological Research Letters. There are one Jupyter notebook and demo data so that the audience can run build a machine learning model with the P/S ratios as a physics loss in addition to the data driven loss.t

Kong, Qingkai↗

DOE OSTI2022

Use Attainability Analysis Aquatic Life Uses for Perennial Reach of Sandia Canyon [Slides]

The following information will be presented during the February 23, 2022 Accord Pueblos Technical Meeting. The purpose of the study is to determine if natural thermal conditions are preventing the attainment of Coldwater Aquatic Life Use in the perennial reach of the upper Sandia Canyon Assessment Unit (Sandia AU). The New Mexico Water Quality Standards allow for a change in the designated use if a Use Attainability Analysis (UAA) demonstrates that the use is not attainable due to one or more of six factors listed in 40 CFR 131.10(g), including naturally occurring pollutant concentrations. The Sandia AU is located in a perennial reach of upper Sandia Canyon between Sigma Canyon and NPDES Outfall 001. The classified Segment 20.6.4.126 NMAC comprises perennial waters within Los Alamos National Laboratory boundaries and includes the Sandia AU. Persistent surface flows originate from NPDES permitted effluent releases. These releases have occurred since the early 1950’s and continue today. The UAA examines several lines of evidence. NMED’s Air-Water Temperature Correlation (AWTC) model is used for identifying appropriate stream classifications and attainable aquatic life use subcategories. The model correlates between July average air temperatures (ATEMP) and maximum weekly average stream temperatures. Air temperatures are obtained from PRISM and LANL Meteorological Towers and used to derive ATEMP. Thermographs were placed in the Sandia AU to obtain measured stream temperatures during summer months when stream temperatures are the highest. Measured data is used with AWTC modeled data to determine if the Sandia AU is meeting its natural air temperature driven thermal condition.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2023

Update on Tuning Geant4 FTF Parameters

This report will cover where in Geant4 FTF hadronic model improving agreement between simulation and experimental data cen be done via tuning model parameters and where the situation is largely driven by the underlying algorithms.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2022

Analytics-at-scale of Sensor Data for Digital Monitoring in Nuclear Plants (4th Annual Report)

Nuclear plant sites collect and store large volumes of data collected from various equipment and systems. These datasets typically include plant process parameters, maintenance records, technical logs, online monitoring data, and equipment failure data. The collection of such data affords an opportunity to leverage data-driven machine learning and artificial intelligence technologies to provide diagnostic and prognostic capabilities within the nuclear power industry to reduce operating and maintenance costs. In this way, nuclear energy can become more economically competitive with other energy sources, and premature closures can be avoided. From a maintenance standpoint, savings can be achieved by leveraging machine learning and artificial intelligence technologies to develop data-driven algorithms to better diagnose and predict potential faults within the system. Improved model accuracy can lead to reductions in unnecessary maintenance and more efficient planning of future maintenance, thus lowering the costs associated with parts, labor, and unnecessary planned, forced, or extended outages. From an operations perspective, cost savings can be generated by shifting from route-based monitoring to wireless technologies for online monitoring, and by transitioning from onsite- to cloud-based computing and storage services. Wireless monitoring would reduce the operator manhours required for taking routine measurements, while cloud computing services would generate cost savings by reducing the amount of hardware needing to be purchased and maintained—all while scaling to both computational and storage demands. This report summarizes this project’s effort to shift from costly, labor-intensive preventative maintenance to cheaper predictive maintenance.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

NASA NTRS1994

Graph-Based Dynamic Assignment Of Multiple Processors

Algorithm-to-architecture mapping model (ATAMM) is strategy minimizing time needed to periodically execute graphically described, data-driven application algorithm on multiple data processors. Implemented as operating system managing flow of data and dynamically assigns nodes of graph to processors. Predicts throughput versus number of processors available to execute given application algorithm. Includes rules ensuring application algorithm represented by graph executed periodically without deadlock and in shortest possible repetition time. ATAMM proves useful in maximizing effectiveness of parallel computing systems.

Hayes, Paul J.↗

NASA NTRS2015

The Global Structure of UTLS Ozone in GEOS-5: A Multi-Year Assimilation of EOS Aura Data

Eight years of ozone measurements retrieved from the Ozone Monitoring Instrument (OMI) and the Microwave Limb Sounder, both on the EOS Aura satellite, have been assimilated into the Goddard Earth Observing System version 5 (GEOS-5) data assimilation system. This study thoroughly evaluates this assimilated product, highlighting its potential for science. The impact of observations on the GEOS-5 system is explored by examining the spatial distribution of the observation-minus-forecast statistics. Independent data are used for product validation. The correlation coefficient of the lower-stratospheric ozone column with ozonesondes is 0.99 and the bias is 0.5%, indicating the success of the assimilation in reproducing the ozone variability in that layer. The upper-tropospheric assimilated ozone column is about 10% lower than the ozonesonde column but the correlation is still high (0.87). The assimilation is shown to realistically capture the sharp cross-tropopause gradient in ozone mixing ratio. Occurrence of transport-driven low ozone laminae in the assimilation system is similar to that obtained from the High Resolution Dynamics Limb Sounder (HIRDLS) above the 400 K potential temperature surface but the assimilation produces fewer laminae than seen by HIRDLS below that surface. Although the assimilation produces 5 - 8 fewer occurrences per day (up to approximately 20%) during the three years of HIRDLS data, the interannual variability is captured correctly. This data-driven assimilated product is complementary to ozone fields generated from chemistry and transport models. Applications include study of the radiative forcing by ozone and tracer transport near the tropopause.

GEOS-5↗

NASA NTRSDate not supplied

Lessons Learned in the Application of Machine Learning Techniques to Air Traffic Management

There is an increasing interest in applying methods based on Machine Learning Techniques (MLT) to problems in Air Traffic Management (ATM). The current interest is based on developments in Cloud Computing, the availability of open software and the success of MLT in automation, consumer behavior and finance involving large databases. This paper reviews the current-state-of-the art in applying MLT to aviation operations, its promises and challenges. Historically aviation operations have been analyzed using physics-based models and provide information for making operational decisions. Aviation operations involving many decision makers, multiple objectives, poor or unavailable physics-based models and a rich historical database are prime candidates for analysis using data-driven methods. The promises and challenges in applying MLT to ATM is traced through three examples based on the authors’ experience, each separated by a decade, to show the influence of data and feature selection in the successful application of MLT to ATM. As always, the best approach depends on the task, the physical understanding of the problem and the quality and quantity of the available data.

Machine Learning Techniques↗

NASA NTRSDate not supplied

Natural Language Processing Analysis of Notices to Airmen for Air Traffic Management Optimization

With new emerging technologies in the field of NLP, we explore their applications to digitize and analyze heritage Air Traffic Management (ATM) documents for planning and optimizing airspace operations. Specifically, this research focuses on harvesting semi-structured or un-structured information contained in Notices to Airmen (NOTAMs). Using NLP and other advanced data analytics, we will construct a data-driven framework which facilitates finding language patterns and the use of pretrained language models for classification and extraction of useful airspace constraints and restrictions. These may lead to tools that assist airspace users in understanding the constraints more efficiently, contributing to better route planning and safer execution. This paper explores three workflows entailing different NLP tasks. First, unsupervised techniques like word embedding and topic modeling are used for pattern finding and document classification. Second, a dataset is created by extracting information from the semi-structured NOTAM format as metadata for categorizing, visualizing, and extracting key entities driving NOTAM content. Third, modern pre-built deep learning based transformer models such as BERT, RoBERTa, and XLNet are evaluated on the question answering task, an even more robust approach to information extraction, as well as their respective fine-tuning tasks. In this work we include various performance metrics for the trained models to evaluate both accuracy and precision and we show that the models can be generalized for their respective tasks. The research work developed shows promise in uncovering trends in digital NOTAMs in the NAS and also offers a new framework for digitizing and inferring insights from free-form legacy NOTAMs, that are yet to be digitized.

Natural Language Processing↗

NASA NTRSDate not supplied

Natural Language Processing (NLP) Analysis of NOTAMs for Air Traffic Management Optimization

Natural Language Processing↗

DOE OSTI2023

Cold Climate Integrated Heat Pump with Energy Storage for Grid-Responsive Control

An air-source integrated heat pump (ASIHP) is a multifunctional unit, capable of space cooling, space heating, and water heating. We developed a packaged cold climate ASIHP, using a multi-stage compressor, capable of working down to -25°C, and providing 100% rated capacity down to -15°C with a heating COP > 2.2. An innovative system configuration and related controls were developed to solve charge balance in the integrated heat pump, smooth charge migration, and mode transition among multiple working modes. Extensive laboratory investigations for individual modes were performed to verify the performance. Its integrated heating capability provides speedy water heating to meet domestic hot water use and store heating energy in a phase change material ceiling/panel. The heating energy storage can be used to shift the load when the electricity price is high. Based on the performance data and a calibrated model from the laboratory testing, we conducted building energy simulations driven by a model predictive control, using EnergyPlus in one U.S. cold climate zone to investigate the grid-responsive control strategy and estimate the utility cost reduction potential.

Shen, Bo↗