Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “atomic”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,693 records · Page 94

Collaborative atomic-scale design, analysis, and nanofabrication for record breaking, single-crystal Zn(x)Cd(1-x)Te solar cell arrays

Cadmium telluride (CdTe) based photovoltaics provide a viable solar energy solution because of their short payback time, low manufacturing cost, and high theoretical efficiency ~29%. However, the highest record laboratory efficiency is only 22.1% and long-term performance degradation is ~1 % per year which hinders greater economic viability. Higher open circuit voltage (Voc) and fill factor (FF) are needed to increase the efficiency of the solar cell. Cells with record energy conversion efficiencies report short current (Jsc) values close to their theoretical maximum. However, Voc and FF in these devices remain well below their anticipated optimum. These electrical parameters depend on the quality of the various layers in the solar cell. In particular they depend on the crystalline quality including the defect and impurity concentrations. Therefore understanding how defects and impurities form and evolve in the material layers is important to design devices with higher efficiency and stability. The aim of this project is to create a novel path around the fundamental barriers to achieve high open-circuit voltages (VOC ≥ 1.0 V) in CdTe/CdS solar cells. The idea of the project was to combine nanopatterned crystal growth and alloy compositional grading (with concomitant lattice parameter and energy band gap grading) to reduce the defect density and dramatically improve spatial uniformity of ZnxCd(1-x)Te/CdS cells. The lattice mismatch between ZnTe and CdS is 3.9% compared to a much larger 9.2% between CdTe and CdS. Importantly, when crystal growth is contained to the nanoscale, the strain in each layer is reduced by a factor of two due to strain partitioning and 3D strain relief mechanisms that come into play. This reduces the strain in the ZnTe from 3.9% to 1.95% which is within the range of metamorphic crystal growth. In preliminary studies, molecular dynamics simulation of ZnTe/CdS islands predicted dislocation-free material when the patterning was reduced to ~80 nm in diameter. The energy band gap of ZnxCd(1-x)Te is also graded in conjunction with alloy composition. ZnTe has an energy band gap of 2.3 eV. Finally, an added benefit of patterned growth is that it enables direct one-to-one study of the relationships between fabrication, microstructure and performance of individual crystal grains within the array. Experimental characterization techniques such as atomic probe tomography (APT) and transmission electron microscopy (TEM) have elucidated much about the microstructure of the layers. However, the techniques are destructive, costly and have limitations on the information they convey. For example, TEM gives information with atomic scale resolution but on 2-dimensional substrates. On the other hand, APT gives 3-dimensional information but is not able to resolve atomic scale structure. Alternatively, Molecular Dynamics (MD) simulations offer a solution to rapidly generate time-resolved, 3-dimensional, atomic scale structures of crystal growth. Direct MD simulations of microstructures of Cu-doped II-VI compound multilayers can impact the research on CdTe/CdS solar cells. Such MD simulations require an interatomic potential database that includes at least four elements Cu, Cd, Te, and S. The Stillinger-Weber (SW) potential is the most widely used interatomic potential for semiconductors. However, while SW potentials have been developed for Ga-In-As-Se-Te, Al-Ga-In-P-As-Sb, Cd-Te-Zn-As-Si, In-Ga-N systems, no potentials existed to simulate Cd-Zn-Hg-Se-S-Te-Cu. The goal of this effort was to fill the knowledge gap by developing a Zn-Cd-Hg-S-Se-Te-Cu SW potential database to enable MD simulations of microstructures of Cu-doped CdTe/CdS solar cells. The new potential was then applied, via MD crystal growth simulations, to study the growth mechanisms and atomic structures of the ZnTe/Cu/CdTe/CdS multilayers under various conditions. The objective of the project was to inform the solar cell community on crystal growth and defect formation at the interface between CdTe-based epilayers grown on CdS substrates. MD simulations offered a unique opportunity to analyze the 3-dimensional crystal growth evolution of Cu doped ZnxCd(1-x)TeyS(1-y) alloys with atomic scale resolution under a variety of conditions. The effect of substrate orientation and polycrystallinity on crystal growth was studied. Substrates with grain boundaries were created and the growth evolution on these substrates were analyzed. Another focus was to elucidate the effect of dopant incorporation on the nature of polycrystallinity crystal growth. Dopants available through the Stillinger-Weber potential developed in this project included Cu, Zn, S, Se, Hg and native vacancies.

14 SOLAR ENERGY↗

Atomic-scale e-beam sculptor

A system and method (referred to as the system) fabricates controllable atomic assemblies in two and three dimensions. The systems identify by a non-invasive imager, a local atomic structure, distribution of vacancies, and dopant atoms and modify, by a microscopic modifier, the local atomic structure, via electron beam irradiation. The systems store, by a knowledge base, cause-and-effect relationships based on a non-invasive imaging and electron scans. The systems detect, by detectors, changes in the local atomic structure induced by the electron irradiation; and fabricate, a modified atomic structure by a beam control software and feedback.

Kalinin, Sergei V.↗

An Ion-Imprinting Derived Strategy to Synthesize Single-Atom Iron Electrocatalysts for Oxygen Reduction

Carbon-based single-atom catalysts (CSACs) have recently received extensive attention in catalysis research. However, the preparation process of CSACs involves a high-temperature treatment, during which metal atoms are mobile and aggregated into nanoparticles, detrimental to the catalytic performance. Herein, an ion-imprinting derived strategy is proposed to synthesize CSACs, in which isolated metal-nitrogen-carbon (Me-N 4 -C x ) moiety covalently binds oxygen atoms in Si-based molecular sieve frameworks. Such a feature makes Me-N 4 -C x moiety well protected/confined during the heat treatment, resulting in the final material enriched with single-atom metal active sites. As a proof of concept, a single-atom Fe-N-C catalyst is synthesized by using this ion-imprinting derived strategy. Finally, experimental results and theoretical calculations demonstrate high concentration of single FeN 4 active sites distributed in this catalyst, resulting in an outstanding oxygen reduction reaction (ORR) performance with a half-wave potential of 0.908 V in alkaline media.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Laser spectroscopy of indium Rydberg atom bunches by electric field ionization

This work reports on the application of a novel electric field-ionization setup for high-resolution laser spectroscopy measurements on bunched fast atomic beams in a collinear geometry. In combination with multi-step resonant excitation to Rydberg states using pulsed lasers, the field ionization technique demonstrates increased sensitivity for isotope separation and measurement of atomic parameters over previous non-resonant laser ionization methods. The setup was tested at the Collinear Resonance Ionization Spectroscopy experiment at ISOLDE-CERN to perform high-resolution measurements of transitions in the indium atom from the 5s 2 5d 2 D 5/2 and 5s 2 5d 2 D 3/2 states to 5s 2 np 2 P and 5s 2 nf 2 F Rydberg states, up to a principal quantum number of n=72 . The extracted Rydberg level energies were used to re-evaluate the ionization potential of the indium atom to be 46,670.107(4)cm -1 . The nuclear magnetic dipole and nuclear electric quadrupole hyperfine structure constants and level isotope shifts of the 5s 2 5d 2 D 5/2 and 5s 2 5d 2 D 3/2 states were determined for 113,115 In. The results are compared to calculations using relativistic coupled-cluster theory. A good agreement is found with the ionization potential and isotope shifts, while disagreement of hyperfine structure constants indicates an increased importance of electron correlations in these excited atomic states. With the aim of further increasing the detection sensitivity for measurements on exotic isotopes, a systematic study of the field-ionization arrangement implemented in the work was performed at the same time and an improved design was simulated and is presented. The improved design offers increased background suppression independent of the distance from field ionization to ion detection.

74 ATOMIC AND MOLECULAR PHYSICS↗

A modification of the laser detonation-type hyperthermal oxygen atom beam source for a long-term operation

It has been an impedimental problem, for the laser detonation-type atom beam generator, that a poppet in the pulsed supersonic valve is rapidly eroded by the irradiation of powerful laser light and high temperature plasma. In order to operate the atom beam source for a long duration, a modification was made to hide the poppet from direct irradiation of laser and plasma. The alteration of device configuration resulted in great improvement in endurance of poppet more than 300 000 repetitions. Morphology of a polyimide film exposed to approximately 200 000 pulses of hyperthermal oxygen atom beam showed a shaglike carpet structure, which is a characteristic to that exposed to energetic oxygen atoms. A flux of the oxygen atom beam was estimated to be 5x10{sup 14} atoms/cm{sup 2}/pulse at a location of 30 cm away from the nozzle throat.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Atoms and plasmas in a high-magnetic-field trap

We investigate cold rubidium plasmas in a particle trap that has the unique capability to simultaneously laser-cool and trap neutral atoms as well as to confine plasmas in magnetic fields of about three Tesla. The atom trap is a high-field Ioffe-Pritchard laser trap, while the plasma trap is a Ioffe-Penning trap that traps electrons and ions in separate wells. The observed plasma dynamics is characterized by a breathing-mode oscillation of the positive (ionic) plasma component, which feeds back on the behavior of the negative (electron) component of the plasma. At higher densities, the observed oscillations become nonlinear. The electron component has been found to undergo rapid cooling. We further report on the recombination of magnetized plasmas into Rydberg atoms in transient traps and quasi-steady-state traps. In transient traps, large numbers of recombined Rydberg atoms in high-lying states are observed. In quasi-steady-state traps, the measured numbers of recombined atoms are lower and the binding energies higher.

74 ATOMIC AND MOLECULAR PHYSICS↗

One-Dimensional Rydberg Atom Interaction with Half-Cycle Pulses

Our study describes the interaction of Rydberg atoms with short half-cycle pulses, using impulse approximation and modeling of one-dimensional atoms. One-dimensional Rydberg atoms are in extremely elongated states of high principal quantum number. Half-cycle pulses are unipolar, high-power electromagnetic pulses. In our research, their duration is much shorter than the classical electron orbit period. A single electric field pulse simply delivers an impulsive momentum transfer or ''kick'' to the excited electron. Atomic transition matrix elements are found and discussed in the frame of quantum and semiclassical theories, and various approximations are used. The dynamic of THz Rydberg wave packets is investigated. Transition probabilities, calculated from derived simple analytical expressions in the case of two time-delayed weak pulses, agree well with the experimental data and calculations of other authors. Analytical expressions for the revival and fractional revival phenomena of the autocorrelation function for Gaussian and Lorentzian distribution, as well as the ionization probabilities of Rydberg atom interaction with two half-cycle pulses, are analyzed.

74 ATOMIC AND MOLECULAR PHYSICS↗

One- and two-photon ionization of hydrogen atom embedded in Debye plasmas

We present a detailed analysis of the plasma-induced resonance-like atomic structures near the ionization threshold in one- and two-photon ionization of hydrogen atom. Such resonance-like structures result from the migration of the upper bound excited states of bound-bound atomic transitions into the continuum due to the less attractive screened Coulomb potential which simulates the external environmental effect for an atom embedded in Debye plasma. The change from the resonance-like narrow structures into broad continuous spectra as the plasma effect increases could be accounted for by the overlap between the respective wavefunctions of the atomic electron in the initial state and its corresponding outgoing ionized state in the continuum.

74 ATOMIC AND MOLECULAR PHYSICS↗

Charge steering of laser plasma accelerated fast ions in a liquid spray — creation of MeV negative ion and neutral atom beams

The scenario of “electron capture and loss” has been recently proposed for the formation of negative ion and neutral atom beams with up to MeV kinetic energy [S. Ter-Avetisyan, et al., Appl. Phys. Lett. 99, 051501 (2011)]. Validation of these processes and of their generic nature is here provided in experiments where the ion source and the interaction medium have been spatially separated. Fast positive ions accelerated from a laser plasma source are sent through a cold spray where their charge is changed. Such formed neutral atom or negative ion has nearly the same momentum as the original positive ion. Experiments are released for protons, carbon, and oxygen ions and corresponding beams of negative ions and neutral atoms have been obtained. The electron capture and loss phenomenon is confirmed to be the origin of the negative ion and neutral atom beams. The equilibrium ratios of different charge components and cross sections have been measured. Our method is general and allows the creation of beams of neutral atoms and negative ions for different species which inherit the characteristics of the positive ion source.

43 PARTICLE ACCELERATORS↗

Influence of metastable atoms in the simulation of hollow cathode discharge

The characteristics of hollow cathode discharge are investigated by using two-dimensional fluid model combined with a transport model for metastable atoms (F-M model) in argon. It shows that the stepwise ionization is one of main important mechanism for electrons production. The distribution of electric potential, density of electrons, ions, and metastable atoms are calculated with a pressure of 10 Torr and a voltage of 250 V. The peak density of electron and ion is 1.2×10{sup 13} cm{sup −3}, and the peak density of metastable atoms is 3.5×10{sup 13} cm{sup −3}. The results obtained in F-M model are compared with that in fluid model (without metastable atoms involved). Metastable atoms are found to play an important role in the discharge. In addition, with the increase of pressure and voltage, the percentage of stepwise ionization in the total ionization increase, and the difference of discharge characteristics simulated by these two kinds of models rises.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A continuous cold atomic beam interferometer

We demonstrate an atom interferometer that uses a laser-cooled continuous beam of {sup 87}Rb atoms having velocities of 10–20 m/s. With spatially separated Raman beams to coherently manipulate the atomic wave packets, Mach–Zehnder interference fringes are observed at an interference distance of 2L = 19 mm. The apparatus operates within a small enclosed area of 0.07 mm{sup 2} at a bandwidth of 190 Hz with a deduced sensitivity of 7.8×10{sup −5} rad/s/√(Hz) for rotations. Using a low-velocity continuous atomic source in an atom interferometer enables high sampling rates and bandwidths without sacrificing sensitivity and compactness, which are important for applications in real dynamic environments.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

A theoretical investigation of the structural and electronic properties of 55-atom nanoclusters: The examples of Y–Tc and Pt

Several studies have found that the Pt{sub 55} nanocluster adopts a distorted reduced core structure, DRC{sub 55}, in which there are 8–11 atoms in the core and 47–44 atoms in the surface, instead of the compact and high-symmetry icosahedron structure, ICO{sub 55}, with 13 and 42 atoms in the core and surface, respectively. The DRC structure has also been obtained as the putative global minimum configuration (GMC) for the Zn{sub 55} (3d), Cd{sub 55} (4d), and Au{sub 55} (5d) systems. Thus, the DRC{sub 55} structure has been reported only for systems with a large occupation of the d-states, where the effects of the occupation of the valence anti-bonding d-states might play an important role. Can we observe the DRC structure for 55-atom transition-metal systems with non-occupation of the anti-bonding d-states? To address this question, we performed a theoretical investigation of the Y {sub 55}, Zr{sub 55}, Nb{sub 55}, Mo{sub 55}, Tc{sub 55}, and Pt{sub 55} nanoclusters, employing density functional theory calculations. For the putative GMCs, we found that the Y {sub 55} adopts the ICO{sub 55} structure, while Nb{sub 55} and Mo{sub 55} adopt a bulk-like fragment based on the hexagonal close-packed structure and Tc{sub 55} adopts a face-centered cubic fragment; however, Zr{sub 55} adopts a DRC{sub 55} structure, like Zn{sub 55}, Cd{sub 55}, Pt{sub 55}, and Au{sub 55}. Thus we can conclude that the preference for DRC{sub 55} structure is not related to the occupation of the anti-bonding d-states, but to a different effect, in fact, a combination of structural and electronic effects. Furthermore, we obtained that the binding energy per atom follows the occupation of the bonding and anti-bonding model, i.e., the stability of the studied systems increases from Y to Tc with a small oscillation for Mo, which also explains the equilibrium bond lengths. We obtained a larger magnetic moment for Y {sub 55} (31 μ{sub B}) which can be explained by the localization of the d-states in Y at nanoscale, which is not observed for the remaining systems (0–1 μ{sub B})

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Key technologies and applications of laser cooling and trapping {sup 87}Rb atomic system

Atom Interferometry is proved to be a potential method for measuring the acceleration of atoms due to Gravity, we are now building a feasible system of cold atom gravimeter. In this paper development and the important applications of laser cooling and trapping atoms are introduced, some key techniques which are used to obtain {sup 87}Rb cold atoms in our experiments are also discussed.

74 ATOMIC AND MOLECULAR PHYSICS↗

Set-up of a high-resolution 300 mK atomic force microscope in an ultra-high vacuum compatible {sup 3}He/10 T cryostat

The design of an atomic force microscope with an all-fiber interferometric detection scheme capable of atomic resolution at about 500 mK is presented. The microscope body is connected to a small pumped {sup 3}He reservoir with a base temperature of about 300 mK. The bakeable insert with the cooling stage can be moved from its measurement position inside the bore of a superconducting 10 T magnet into an ultra-high vacuum chamber, where the tip and sample can be exchanged in situ. Moreover, single atoms or molecules can be evaporated onto a cold substrate located inside the microscope. Two side chambers are equipped with standard surface preparation and surface analysis tools. The performance of the microscope at low temperatures is demonstrated by resolving single Co atoms on Mn/W(110) and by showing atomic resolution on NaCl(001).

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Study of transitions in thulium atoms in the 410-420-nm range for laser cooling

The possibility of laser cooling of thulium atoms is considered. The hyperfine structure of almost cyclic 4f{sup 13}6s{sup 2} (J{sub g} = 7/2) {r_reversible} 4f{sup 12}5d{sub 3/2}6s{sup 2} (J{sub e} = 9/2) and 4f{sup 13}6s{sup 2} (J{sub g} = 7/2) {r_reversible} 4f{sup 12}5d{sub 5/2}6s{sup 2} (J{sub e} = 9/2) transitions at 410.6 and 420.4 nm, respectively, is studied by the method of sub-Doppler saturation spectroscopy in counterpropagating laser beams. The hyperfine splitting of excited levels involved in these transitions is measured and the natural linewidths of these transitions are determined. The structure of the neighbouring 4f{sup 13}6s6p (J{sub e} = 5/2) and 4f{sup 12}5d{sub 5/2}6s{sup 2} (J{sub e} = 7/2) levels is studied for the first time by this method. The decay probabilities of the J{sub e} = 9/2 levels via channels removing atoms from the cooling cycle are calculated. It is found that the branching ratio for the strong transition at 410.6 nm (A = 6x10{sup 7} s{sup -1}) is smaller than 2x10{sup -5}, which makes this transition most promising for laser cooling. The laser cooling of atoms in a Zeeman cooler at this transition is simulated. The possibility of using a laser-cooled cloud of thulium atoms to study the metrological transition at 1.14 {mu}m is discussed. (laser cooling of atoms)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Resonance dispersion interaction of alkali metal atoms in Rydberg states

With the use of second-order perturbation theory in the long-range interatomic interaction for the degenerate states of two Rydberg atoms we have obtained a general formula for the dependence of atomic interaction energy on the interatomic distance R in the presence of the Förster resonance. Inside of the ‘Förster sphere’ ( R < R {sub F}) this dependence transforms to the formula for electric dipole interaction energy Δ E {sub d−d} = C {sub 3}/ R {sup 3} and for R > R {sub F} it transforms to the formula for the van der Waals interaction energy Δ E {sub VdW} = − C {sub 6}/ R {sup 6}. The van der Waals constant C {sub 6} is represented as an expansion in terms of irreducible components which define the dependence on the interatomic axis orientation relative to the quantisation axis of projections M of the total angular momentum J. The numerical values of the irreducible components of tensor C {sub 6} were calculated for rubidium atoms in the same Rydberg states | nlJM 〉 with large quantum numbers n. We present the calculated resonance interaction energy of two rubidium atoms in the states |43D{sub 5/2M}〉, whose total energy exceeds by only 8 MHz the total energy of one of the atoms in the state |45P{sub 3/2M}〉 and of the other in the state |41F{sub 7/2}M〉. (paper)

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

STATISTICAL ANALYSIS OF THE HEAVY NEUTRAL ATOMS MEASURED BY IBEX

We investigate the directional distribution of heavy neutral atoms in the heliosphere by using heavy neutral maps generated with the IBEX-Lo instrument over three years from 2009 to 2011. The interstellar neutral (ISN) O and Ne gas flow was found in the first-year heavy neutral map at 601 keV and its flow direction and temperature were studied. However, due to the low counting statistics, researchers have not treated the full sky maps in detail. The main goal of this study is to evaluate the statistical significance of each pixel in the heavy neutral maps to get a better understanding of the directional distribution of heavy neutral atoms in the heliosphere. Here, we examine three statistical analysis methods: the signal-to-noise filter, the confidence limit method, and the cluster analysis method. These methods allow us to exclude background from areas where the heavy neutral signal is statistically significant. These methods also allow the consistent detection of heavy neutral atom structures. The main emission feature expands toward lower longitude and higher latitude from the observational peak of the ISN O and Ne gas flow. We call this emission the extended tail. It may be an imprint of the secondary oxygen atoms generated by charge exchange between ISN hydrogen atoms and oxygen ions in the outer heliosheath.

74 ATOMIC AND MOLECULAR PHYSICS↗

CI-MBPT line strengths and atomic probabilities for some transitions of neutral iodine

Iodine is a promising alternative to expensive xenon as a propellant for electric propulsion devices. Iodine optical spectroscopy is a valuable diagnostic tool for optimization of the iodine propellant. Recently, some measurements have been conducted with cells containing iodine plasma, and iodine atomic absorption at several wavelengths (911, 906, 206 and 1315 nm) was measured with a Ti:sapphire laser. Motivated by these experiments and future applications, here we have calculated line strengths and atomic probabilities for the transitions between different types of 5s 2 5p 5 , 5s 2 5p 4 6s, 5s 2 5p 4 6p and 5s 2 5p 4 5d states of atomic iodine, using configuration-interaction many-body perturbation theory. Since experimental transition data for atomic iodine are only available for a relatively small number of transitions, we also performed calculations for the bromine atom, to further validate our approach. We found good agreement between our theory and available experimental data for both elements in most cases. Therefore, we believe that our predicted line strengths and transition probabilities are quite reliable and will be useful for iodine spectroscopy.

74 ATOMIC AND MOLECULAR PHYSICS↗