Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “VELOCITY MEASUREMENT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,693 records · Page 94

The mean sea surface height and geoid along the Geosat subtrack from Bermuda to Cape Cod

The mean sea-surface height and the gravitational geoid are presently estimated via near-surface velocity changes and concurrent sea-level changes along an ascending Geosat subtrack. The velocity measurements were made on three traverses, within ten days, of a Geosat subtrack, by means of an acoustic Doppler current profiler (ADCP). The mean sea-surface height was estimated as the difference between the instantaneous sea-surface height from ADCP and the Geosat residual sea level. In order to minimize mesoscale errors in the estimate, the along-track geoid estimate was computed as the difference between mean sea-level height from the Geosat Exact Repeat Mission and an estimate of the mean sea-surface height.

Kelly, Kathryn A.↗

Three-dimensional boundary layer flow with streamwise adverse pressure gradient

The present study examines the effects of a strong adverse pressure gradient on a 3D turbulent boundary layer in an axisymmetric spinning cylinder geometry. Velocity measurements made with a three-component laser Doppler velocimeter include all three mean flow components, all six Reynolds stress components, and all ten triple-product correlations. Total Reynolds shear stress diminishes as the flow becomes 3D. Lower levels of shear stress were found to persist under adverse pressure gradient conditions. This low stress level was observed to roughly correlate with the magnitude of the crossflow. Variations in the pressure gradient do not alter this correlation. It is inferred that a 3D boundary layer is more prone to separate than a 2D boundary layer.

Driver, David M.↗

Assessment of microburst models for downdraft estimation

The effectiveness of three microburst models in estimating the downdraft from horizontal velocity measurements is assessed. The development of the models and their characteristics are discussed. The simplest model, a linear one, works well for altitudes below 200 m and near the microburst core. A ring-vortex model and an empirical model give the best overall results. The former is the most complex, requiring four variables to define it. The empirical model uses three variables.

Vicroy, Dan D.↗

The companion object to HD114762

We obtained 28 independent radial velocity measurements on the star HD114762, and are now able to derive orbit solution. We confirm the existence of a companion object in an orbit with a semimajor axis about 0.4 au. The new orbit solution is discussed. The result show that the companion is not a planet, but instead is a brown dwarf or a low mass star in a system viewed nearly pole-on.

Cochran, William D.↗

Work performed on velocity profiles in a hot jet by simplified RELIEF

The Raman Excitation + Laser Induced Electronic Fluorescence (RELIEF) velocity measurement method is based on vibrationally tagging oxygen molecules and observing their displacement after a short period of time. Two papers that discuss the use and implementation of the RELIEF technique are presented in this final report. Additionally, the end of the report contains a listing of the personnel involved and the reference documents used in the production of this final report.

Miles, Richard B.↗

The propagation characteristics of the plate modes of acoustic emission waves in thin aluminum plates and thin graphite/epoxy composite plates and tubes

Acoustic emission was interpreted as modes of vibration in plates. Classical plate theory was used to predict dispersion curves for the two fundamental modes and to calculate the shapes of flexural waveforms produced by vertical step function loading. There was good agreement between theoretical and experimental results for aluminum. Composite materials required the use of a higher order plate theory (Reissner-Mindlin) to get good agreement with the measured velocities. Four composite plates with different laminate stacking sequences were studied. The dispersion curves were determined from phase spectra of the time dependent waveforms. Plate modes were shown to be useful for determining the direction of source motion. Aluminum plates were loaded by breaking a pencil lead against their surface. By machining slots at angles to the plane of a plate, the direction in which the force acted was varied. Changing the source motion direction produced regular variations in the waveforms. To demonstrate applicability beyond simple plates, waveforms produced by lead breaks on a thin walled composite tube were also shown to be interpretable as plate modes. The tube design was based on the type of struts proposed for Space Station Freedom's trussed structures.

Prosser, William H.↗

Space debris characterization in support of a satellite breakup model

The Space Kinetic Impact and Debris Branch began an ambitious program to construct a fully analytical model of the breakup of a satellite under hypervelocity impact. In order to provide empirical data with which to substantiate the model, debris from hypervelocity experiments conducted in a controlled laboratory environment were characterized to provide information of its mass, velocity, and ballistic coefficient distributions. Data on the debris were collected in one master data file, and a simple FORTRAN program allows users to describe the debris from any subset of these experiments that may be of interest to them. A statistical analysis was performed, allowing users to determine the precision of the velocity measurements for the data. Attempts are being made to include and correlate other laboratory data, as well as those data obtained from the explosion or collision of spacecraft in low earth orbit.

Fortson, Bryan H.↗

Rocket plume flowfield characterization using laser Rayleigh scattering

A Doppler-resolved laser Rayleigh scattering diagnostic was applied to a 111 N thrust, regenerative and fuel-film cooled, gaseous hydrogen/gaseous oxygen rocket engine. The axial and radial mean gas velocities were measured from the net Doppler shifts observed for two different scattering angles. Translational temperatures and number densities were estimated from the Doppler widths and scattered intensities, respectively, by assuming that water was the dominant scattering species in the exhaust. The experimental results are compared with theoretical predictions from a full Navier-Stokes code (RD/RPLUS) and the JANNAF Two-Dimensional Kinetics (TDK) and Standardized Plume Flowfield (SPF-II) codes. Discrepancies between the measured and predicted axial velocities, temperatures, and number densities are evident. Radial velocity measurements, however, show excellent agreement with predictions. The discrepancies are attributed primarily to inefficient mixing and combustion caused by the injection of excessive oxidizer along one side of the thrust chamber. Thrust and mass flow rate estimates obtained from the Rayleigh measurements show excellent agreement with the globally measured values.

Zupanc, Frank J.↗

The Laser Atmospheric Wind Sounder (LAWS) Preliminary Error Budget and Performance Estimate

The Laser Atmospheric Wind Sounder (LAWS) study phase has resulted in a preliminary error budget and an estimate of the instrument performance. This paper will present the line-of-sight (LOS) Velocity Measurement Error Budget, the instrument Boresight Error Budget, and the predicted signal-to-noise ratio (SNR) performance. The measurement requirements and a preliminary design for the LAWS instrument are presented in a companion paper.

Kenyon, David L.↗

Numerical investigation of the effects of icing on fixed and rotary wing aircraft

A 2-D multi-element airfoil code was modified to study the effects of icing on the aerodynamic characteristics of high lift systems. In each zone of the flow field, the solver numerically integrates the 2-D compressible Navier-Stokes equations using a time marching scheme. The surface pressure distribution is generated over a GAW 130 airfoil/flap combination for a flap setting of 25 degrees, and an angle of attack equal to 5 degrees, at a freestream Mach number equal to 0.3. A series of calculations were performed to determine the effects of small scale ice build up on the high lift characteristics of this arifoil/flap combination. The appendix summarizes this progress. Joint studies on correlation of a 3-D iced wing code with experimental data reviewed new measured laser Doppler velocimeter data in the separated region behind the leading edge ice shape. A version of the iced wing analysis using the Roe scheme was developed to evaluate the poor correlation between the computed and measured velocities in the separated region. Work on the extension of the wing-alone analysis to wing body configuration began with modifications to the 3-D iced wing analyses to accept externally generated grids and multi-block grids.

Sankar, L. N.↗

The 11 year history of starspots on V1149 Ori = HD 37824

All available radial-velocity measures, published and unpublished, yield an improved period and a new (assumed circular) solution. The period is 53.58 d +/- 0.02 d, and conjunction (K1 giant in front) was at 2 444 325.93 +/- 0.12 d. Eleven years of V-band photometry, published and unpublished, between 1978-1979 and 1989-1990 are analyzed. Eighteen data groups are fit with a two-spot light-curve-modeling technique. Six spots existing sometime during the 11 years are identified, and the 4-percent range of their rotation periods is used to estimate a differential rotation coefficient of k = 0.08 +/- 0.02. Observed lifetimes of those six spots are consistent with times calculated on the assumption that large spots are disrupted by the shear of differential rotation. The two best observed spots each lasted about five years.

Hall, Douglas S.↗

The Mees CCD imaging spectrograph

The Mees CCD (MCCD0 instrument is an imaging spectroscopy device which uses the 25-cm coronagraph telescope and the 3.0-m Coude spectrograph at Mees Solar Observatory on Haleakala, Maui. The instrument works with resolving power up to about 200,000 with significant throughput from 3934 A (Ca II K) to about 10,000 A. A fast guiding active mirror stabilizes the image during observations. A rapidly writing magnetic tape storage system allows observations to be recorded at 256 kbytes/s. Currently, the MCCD is used for imaging spectroscopy of solar flares at 6563 A (H-alpha), and velocity measurements of umbral oscillations; future plans include emission line studies of active region coronae, and photospheric studies of solar oscillations.

Penn, Matthew J.↗

Ultrasonic sensing of powder densification

An independent scattering theory has been applied to the interpretation of ultrasonic velocity measurements made on porous metal samples produced either by a cold or a high-temperature compaction process. The results suggest that the pores in both processes are not spherical, an aspect ration of 1:3 fitting best with the data for low (less than 4 percent) pore volume fractions. For the hot compacted powders, the pores are smooth due to active diffusional processes during processing. For these types of voids, the results can be extended to a pore fraction of 10 percent, at which point voids form an interconnected network that violates the model assumptions. The cold pressed samples are not as well predicted by the theory because of poor particle bonding.

Lu, Yichi↗

H0538 + 608 (= BY Camelopardalis) - An asynchronously rotating AM Herculis binary?

Evidence from a concurrent X-ray/optical observing program is presented which indicates that the orbital period of the anomalous AM Her-type cataclysmic variable H0538 + 608 (BY Cam) differs from the rotational period by 1.3 +/- 0.1 percent. This finding would explain much of the unusual behavior previously exhibited in optical photometry and polarimetry. The model proposed by Ishida et al. (1991) is developed further using observations of accretion and the primary characteristics of optical and X-ray light curves and radial velocity measures of H-alpha. An optical QPO with a period of about 30 min was seen on two nights and possible causes of it are discussed.

Silber, A.↗

Flow diagnostics of an arcjet using laser-induced fluorescence

A diagnostic has been developed to measure velocity and translational temperature in the plume of an arcjet thruster. Laser induced fluorescence with a narrowband CW laser is used to probe the Balmer alpha transition of excited atomic hydrogen. The velocity is determined from the Doppler shift of the fluorescence excitation spectrum while temperature is inferred from its shape. Analysis shows that while Doppler broadening is the only significant broadening mechanism, the fine structure of the transition must be accounted for. Near the exit plane, axial velocities vary from 4 to 14 km/s; radial velocities vary from 0 to 4 km/s; and swirl velocities are shown to be relatively small. Temperatures from 1000 to 5000 K indicate high dissociation fractions.

Liebeskind, John G.↗

Rocket plume flowfield characterization using laser Rayleigh scattering

A Doppler-resolved laser Rayleigh scattering diagnostic was applied to a 111 N thrust, regenerative and fuel-film cooled, gaseous hydrogen/gaseous oxygen rocket engine. The axial and radial mean gas velocities were measured from the net Doppler shifts observed for two different scattering angles. Translational temperatures and number densities were estimated from the Doppler widths and scattered intensities, respectively, by assuming that water was the dominant scattering species in the exhaust. The experimental results are compared with theoretical predictions from a full Navier-Stokes code (RD/RPLUS) and the JANNAF Two-Dimensional Kinetics (TDK) and Standardized Plume Flowfield (SPF-II) codes. Discrepancies between the measured and predicted axial velocities, temperatures, and number densities are evident. Radial velocity measurements, however, show excellent agreement with predictions. The discrepancies are attributed primarily to inefficient mixing and combustion caused by the injection of excessive oxidizer along one side of the thrust chamber. Thrust and mass flow rate estimates obtained from the Rayleigh measurements show excellent agreement with the globally measured values.

Zupanc, Frank J.↗

The evidences of waves in the atmospheres of Venus and Mars

In the last 15 years, distributions of state properties and velocities measured in the atmospheres of Venus and Mars have indicated the presence of waves of varied types occurring from the lower atmosphere to the exosphere. This paper gives an organized picture of observations which indicate and characterize wave phenomena in the Venusian and Martian atmospheres, to illustrate how widely they occur, and to emphasize the probable importance of waves to the dynamics. Some of the Pioneer Venus Probe observations presented have not been previously discussed in the context of waves.

Seiff, Alvin↗

S-154 in the Large Magellanic Cloud - Spectral evolution from a luminous Fe II variable to a symbiotic-like star

The evolution of the emission-line Star S-154, between February and December 1988, from a low-excitation 'Fe II star' into a high-excitation state that resembles symbiotic stars, is traced. It is inferred that the spectral type of central stars do not always dominate the physical conditions in the circumstellar material and thereby determine the nebular classification. The membership of S-154 in the LMC was confirmed with a radial velocity measurement of +274 km/s. The historical light curve (1880-1990) obtained from 346 photograph plates of the Harvard Plate Library exhibits about 4 mag of variations, with an MB range of -6 to -2. No evidence was found for coherent modulations that would represent the orbital period of a symbiotic binary.

Remillard, R. A.↗