Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Texture”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,693 records · Page 94

Three-dimensional mapping of mineral in intact shark centra with energy dispersive x-ray diffraction

The centra of shark vertebrae consist of cartilage mineralized by a bioapatite similar to bone's carbonated hy-droxyapatite, and, without a repair mechanism analogous to remodeling in bone, these structures still survive millions of cycles of high-strain loading. The main structures of the centrum are an hourglass-shaped double cone and the intermedialia which supports the cones. Little is known about the nanostructure of shark centra, spe-cifically the relationship between bioapatite and cartilage fibers, and this study uses energy dispersive diffraction (EDD) with polychromatic synchrotron x-radiation to study the spatial organization of the mineral phase and its crystallographic texture. The unique energy-sensitive detector array at beamline 6-BM-B, the Advanced Photon Source, enables EDD to quantify the texture within each sampling volume with one exposure while constructing 3D maps via specimen translation across the sampling volume. Herein this study maps a centrum from two shark orders, a carcharhiniform and a lamniform, with different intermedialia structures. In the blue shark (Prionace glauca, Carcharhiniformes), the bioapatite's c-axes are oriented laterally within the centrum's cone walls but axially within the wide wedges of the intermedialia; the former is interpreted to resist lateral deformation, the latter to support axial loads. In the shortfin mako (Isurus oxyrinchus, Lamniformes), there is some tendency for c-axis variation with position, but the situation is unclear because one dimension of the sampling volume is consid-erably larger than the thickness and spacing of the intermedialia's radially-oriented lamellae. Because elastic modulus in collagen plus bioapatite mineralized tissues varies significantly with both volume fraction of bio-apatite and crystallographic texture, the present 3D EDD-derived maps should inform future 3D numerical models of shark centra under applied load.

59 BASIC BIOLOGICAL SCIENCES↗

The characterization of shape memory effect for low elastic modulus biomedical {beta}-type titanium alloy

This work investigates the textures of biomedical TiNbTaZr alloy rolled by 99% cold reduction ratios in thickness. The relationship between textures and superelasticity of the specimens treated at 873 K and 1223 K for 1.2 ks is studied. The microstructure of tensile specimen is investigated by transmission electron microscopy. Textures of cold-rolled and heat-treated specimens are studied. During unloading, the anisotropy of superelastic strain and pure elastic strain in the heat-treated specimens is observed. Superelastic strain along rolling direction and transverse direction is larger than those along 45 deg. from rolling direction while pure elastic strain shows the highest value along 45 deg. from rolling direction in the specimen treated at 873 K. For the specimen treated at 1223 K, higher pure elastic strain is obtained along rolling direction. The maximum recovered strain around 2.11% is obtained along rolling direction.

36 MATERIALS SCIENCE↗

An EBSD investigation of cryogenically-rolled Cu–30%Zn brass

Electron backscatter diffraction was used to study grain structure development in heavily cryogenically-rolled Cu–30%Zn brass. The produced microstructure was found to be very inhomogeneous. At a relatively coarse scale, it consisted of texture bands having crystallographic orientations close to the α- and γ-fibers. The texture bands contained internal structure comprising shear bands, mechanical twins, and low-angle boundaries. Such features were more pronounced within the γ-fiber, and this resulted in a heterogeneous ultrafine grain structure. The cryogenic rolling was concluded to be not straightforward for production of nanocrystalline grain structure in Cu–30%Zn brass. - Highlights: • Cryogenic rolling produced an inhomogeneous ultrafine-grained microstructure. • Grain refinement was mainly related with twinning and shear banding. • Grain refinement preferentially occurred in (111) fiber texture.

36 MATERIALS SCIENCE↗

Residual-stress-induced grain growth of twinned grains and its effect on formability of magnesium alloy sheet at room temperature

A magnesium alloy sheet was subjected to in-plane compression along with a vertical load to avoid buckling during compression. Pre-compressed specimens machined from the sheet were annealed at different temperatures and the changes in microstructure and texture were observed using electron back scattered diffraction (EBSD). Twinned grains preferentially grew during annealing at 300 °C, so that a strong texture with the < 0001 > direction parallel to the transverse direction developed. EBSD analysis confirmed that the friction caused by the vertical load induced inhomogeneous distribution of residual stress, which acted as an additional driving force for preferential grain growth of twinned grain during annealing. The annealed specimen showed excellent formability. - Highlights: • A magnesium alloy sheet subjected to in-plane compression under a vertical load • The vertical load induced inhomogeneous distribution of the residual stress. • The residual stress acted as an additional driving force for grain growth. • The annealed specimen with strong non-basal texture showed excellent formability.

36 MATERIALS SCIENCE↗

Microstructure and mechanical behavior of direct metal laser sintered Inconel alloy 718

In this paper, we investigate microstructure and quasi-static mechanical behavior of the direct metal laser sintered Inconel 718 superalloy as a function of build direction (BD). The printed material was further processed by annealing and double-aging, hot isostatic pressing (HIP), and machining. We characterize porosity fraction and distribution using micro X-ray computed tomography (μXCT), grain structure and crystallographic texture using electron backscattered diffraction (EBSD), and mechanical response in quasi-static tension and compression using standard mechanical testing at room temperature. Analysis of the μXCT imaging shows that majority of porosity develops in the outer layer of the printed material. However, porosity inside the material is also present. The EBSD measurements reveal formation of columnar grains, which favor < 001 > fiber texture components along the BD. These measurements also show evidence of coarse-grained microstructure present in the samples treated by HIP. Finally, analysis of grain boundaries reveal that HIP results in a large number of annealing twins compared to that in samples that underwent annealing and double-aging. The yield strength varies with the testing direction by approximately 7%, which is governed by a combination of grain morphology and crystallographic texture. In particular, we determine tension–compression asymmetry in the yield stress as well as anisotropy of the material flow during compression. We find that HIP lowers yield stress but improves ductility relative to the annealed and aged material. These results are discussed and critically compared with the data reported for wrought material in the same condition. - Highlights: • Microstructure and mechanical properties of DMLS Inconel 718 are studied in function of build direction. • Inhomogeneity of microstructure in the material in several conditions is quantified by μXCT and EBSD. • Anisotropy and asymmetry in the mechanical response are determined by tension and compression testing.

36 MATERIALS SCIENCE↗

Fabrication and characterization of powder metallurgy tantalum components prepared by high compaction pressure technique

The present study has investigated the consolidation behaviors of tantalum powders during compaction and sintering, and the characteristics of sintered components. For die compaction, the densification behaviors of the powders are simulated by finite element analyses based on the yield function proposed by Shima and Oyane. Accordingly, the green density distribution for coarser particles is predicted to be more uniform because they exhibits higher initial relative tap density owing to lower interparticle friction. It is also found that cold isostatic pressing is capable of producing higher dense compacts compared to the die pressing. However, unlike the compaction behavior, the sintered density of smaller particles is found to be higher than those of coarser ones owing to their higher specific surface area. The maximum sintered density was found to be 0.96 of theoretical density where smaller particles were pressed isostatically at 400 MPa followed by sintering at 2000 °C. Moreover, the effects of processing conditions on grain size and texture were also investigated. The average grain size of the sintered specimen is 30.29 μm and its texture is less than 2 times random intensity. Consequently, it is concluded that the higher pressure compaction technique is beneficial to produce high dense and texture-free tantalum components compared to hot pressing and spark plasma sintering. - Highlights: • Higher Ta density is obtained from higher pressure and sintering temperature. • High compaction method enables P/M Ta to achieve the density of 16.00 g·cm{sup −3}. • A P/M Ta component with fine microstructure and random orientation is developed.

36 MATERIALS SCIENCE↗

Microstructure, mechanical properties and microtexture of friction stir welded S690QL high yield steel

Two try-out campaigns of friction stir welding (FSW) were performed with different friction parameters to join S690QL high yield strength steel. The welds were investigated at macroscopic and microscopic scales using optical and electronic microscopy and microhardness mapping. Welds of the second campaign exhibit microstructures and mechanical properties in accordance with requirements for service use. Microtexture measurements were carried out in different zones of welds by electron backscattered diffraction (EBSD). It is shown that that texture of the bottom of the weld is similar to that of the base metal, suggesting a diffusion bonding mechanism. Finally, the mechanical properties (tensile strength, resilience, bending) were established on the most promising welds. It is shown that it is possible to weld this high yield strength steel using FSW process with satisfactory geometric, microstructural and mechanical properties. - Highlights: •1000 mm ∗ 400 mm ∗ 8 mm S690QL steel plates are joined by friction stir welding (FSW). •Maximum hardness is reduced by optimization of process parameters. •Various microstructures are formed but no martensite after process optimization. •Texture is modified in mechanically affected zones of the weld. •Texture in the bottom of the weld is preserved, suggesting diffusion bonding.

36 MATERIALS SCIENCE↗

Physical and electrical properties of melt-spun Fe-Si (3–8 wt.%) soft magnetic ribbons

Highlights: • Increasing processing wheel speed during melt spinning refined both the ribbon cross-sectional thickness and grain size. • Mössbauer studies indicated Si content influenced the number of Fe sites and the magnetic field/structural environments. • Vickers hardness and the elastic modulus were observed to increase in response to elevated Si content and wheel speed. • Increasing Si content diluted the magnetization. - Abstract: Fe-Si alloys ranging from 3 to 8 wt% Si were rapidly solidified using melt spinning. Wheel speeds of 30 m/s and 40 m/s were employed to vary cooling rates. Mössbauer spectroscopic studies indicated the Si content significantly influenced the number of Fe sites, relative abundance of various Fe species, and internal magnetic fields/structural environments. Wheel speed altered Fe speciation only in the 3 wt% sample. Scanning electron microscopy confirmed that increasing the wheel speed refined both the ribbon thickness and grain size. Electron backscatter diffraction results suggest tailoring melt spinning process parameters and alloy chemistry may offer the ability to manipulate {001} texture development. Electrical resistivity measurements were observed to increase in response to elevated Si content. Increased hardness was correlated to elevated Si content and wheel speed.

36 MATERIALS SCIENCE↗

Effects of rolling processes on ridging generation of ferritic stainless steel

Highlights: • The effects of microstructural refinement and texture on ridging are analysed. • Optimal reduction during cold rolling benefits the enhancement of ridging resistance. • A Steckel-mill rolling method is proposed to improve ridging resistance of FSS 430. • 30% of ridging height reduction can be achieved with proposed rolling method. - Abstract: In order to reduce the ridging generation of ferritic stainless steel (FSS) during forming process, the crystallographic texture of the FSS was modified by optimisation of both rolling and annealing processes. A systematic study was carried out to improve the ridging resistance of the FSS by investigating the sequential changes in microstructure and texture during different rolling and annealing processes. The results show that the surface roughness of the final sheet strained by 20% along the rolling direction is decreased by 20% to 30% using Steckel-mill rolling compared to traditional tandem rolling. A direct correlation is found between the ridging resistance of the FSS and the rolling routines. It has been observed that an optimal reduction value during cold rolling process is critical to the microstructural refinement and surface quality improvement of the FSS. Reduction of the fraction of {001} <110> component by optimisation of the rolling processes is found to be effective in reducing the ridging height of the FSS during the formation process.

36 MATERIALS SCIENCE↗

Abnormal grain growth driven by high-temperature proton irradiation in nanocrystalline Ni

In this research we examine a nanocrystalline Ni thin film exposed to high-temperature proton irradiation and compare it with as-deposited and annealed-only counterparts. Despite lacking thermal spikes typical of heavy ions, 400 °C proton irradiation drives pronounced grain growth in select grains, whereas annealing alone yields only modest coarsening. Grain-boundary statistics show fewer low-angle boundaries (10–20°) and more high-angle boundaries (55–60°), consistent with irradiation-enhanced mobility of high-misorientation boundaries. The irradiated films retain a random texture, with no evidence of texture development or sharpening. Mechanisms, such as radiation-enhanced grain boundary diffusion, beam-induced heating, and ion channeling-mediated selective grain growth, are unlikely to be the predominant drivers to explain the resultant microstructure. Instead, we suggest irradiation-induced modifications of grain-boundary structure, including possible complexion transitions, as one plausible explanation for this selective grain growth and retention of random texture. However, additional temperature–dose studies are required to confirm the mechanism.

36 MATERIALS SCIENCE↗

Magnetotransport properties of c-axis oriented La{sub 0.7}Sr{sub 0.3}MnO{sub 3} thin films on MgO-buffered SiO{sub 2}/Si substrates

c-axis oriented La{sub 0.7}Sr{sub 0.3}MnO{sub 3} (LSMO) films on MgO-buffered SiO{sub 2}/Si substrates were prepared, and their texture, microstructure, and magnetotransport properties were studied and compared to epitaxial LSMO/MgO (001) and polycrystalline LSMO/SiO{sub 2}/Si films. c-axis oriented MgO buffer layers were obtained on amorphous SiO{sub 2} layer through rf sputter deposition at low substrate temperature and consequent postannealing processes. In situ pulsed laser deposition-grown LSMO films, deposited on the MgO layer, show strong c-axis texture, but no in-plane texture. The c-axis oriented LSMO films which are magnetically softer than LSMO/SiO{sub 2}/Si films exhibit relatively large low field magnetoresistance (LFMR) and sharper MR drop at lower field. The large LFMR is attributed to a spin-dependent scattering of transport current at the grain boundaries.

36 MATERIALS SCIENCE↗

CHARACTERIZATION OF THE LEVEL OF PLASTIC DEFORMATION IN COLD-ROLLED TI-6AL-4V SAMPLES BY THERMOELECTRIC POWER MEASUREMENTS

This paper presents experimental data that illustrates the intrinsic sensitivity of the thermoelectric contact technique based on the Seebeck effect, in order to detect the presence of anisotropy due to plastic deformation produced by the manufacturing process of cold working at different degrees of reduction in thickness, namely 40, 60 and 80% in Ti-6AL-4V. The results describe the behaviour of the thermoelectric power (TEP) coefficient with respect to the anisotropy and microstructure in a highly textured material that presents both morphological and crystallographic texture. Ultrasonic measurements of shear wave velocity were also conducted in order to obtain a direct correlation between the presence of a significant anisotropy in the cold-rolled Ti-6AL-4V samples and the TEP measurements, before and after heat treatment (annealing). TEP measurements offer a means to assess the evolution of the level of plastic deformation, which allows for a better correlation between texture-induced anisotropy and the material microstructural and properties.

36 MATERIALS SCIENCE↗

Residual stress and magnetic behavior of multiferroic CoFe{sub 2}O{sub 4}/Pb(Zr{sub 0.52}Ti{sub 0.48})O{sub 3} thin films

Multiferroic composite thin films consisting of CoFe{sub 2}O{sub 4} (CFO) and Pb(Zr{sub 0.52}Ti{sub 0.48})O{sub 3} (PZT) layers were deposited through a combined route of rf magnetron sputtering and sol gel on Pt(111)/TiO{sub 2}/SiO{sub 2}/Si substrates. The coupling effects in the bilayered thin film were studied by looking at the relationships among the crystallite orientation, magnetic behavior, and the in-plane residual stress. Phase selective residual stress analysis conducted by using x-ray method demonstrated a close correlation between the stress imposed on the PZT layer and its texture. A change in the PZT layer orientation from (111) to (010) with the increasing layer thickness was observed in the multiferroic thin film as the system changes from an interface energy minimizing texture to a strain energy density minimizing texture. The CFO phase in the multiferroic thin films was preferably oriented in the (111) orientation. However, there is a change in magnetization as well as coercivity of the multiferroic thin films when the top PZT layer was varied in thickness. A close correlation between the magnetization and the in-plane stress in the CFO bottom layer imposed by the PZT film thickness was observed.

36 MATERIALS SCIENCE↗

A Quantitative Analysis of Room Temperature Recrystallization Kinetics in Electroplated Copper Films using High Resolution X-ray Diffraction

Time-resolved in situ x-ray diffraction measurements were used to study the room-temperature recrystallization kinetics of electroplated copper thin films with thicknesses between 400 and 1000 nm. The thinnest films exhibited limited recrystallization and subsequent growth of grains, while recrystallized grains in the thicker films grew until all as-plated microstructure was consumed. For all films, recrystallized grains that belonged to the majority texture component, <111>, started growing after the shortest incubation time. These grains exhibited volumetric growth until they achieved the film thickness. After this point the growth mode became planar, with the <111>-type grains growing in the plane of the film. Grains with the <111> direction normal to the film surface started growing after the <111>-type grains switched to planar growth. However, the planar growth of this texture component finished at the same time as the growth of the <111> grains. Profile fitting of the 111 peak permitted the separation of the diffraction signals from recrystallized and as-plated grain populations. The average strains in these two populations, calculated from the peak position of the corresponding {l_brace}111{r_brace} reflections, were different, indicating a heterogeneous stress state within this texture component. The increasing volume fraction of recrystallized <111> grains with time was monitored via the variation in the diffracted intensity. This variation could be represented by the Johnson-Mehl-Avrami-Kolmogorov model.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Structure and magnetic properties of L1{sub 0}-FePt thin films on TiN/RuAl underlayers

Highly ordered L1{sub 0} FePt-oxide thin films with small grains were prepared by using a RuAl layer as a grain size defining seed layer along with a TiN barrier layer. Different HAMR (Heat Assisted Magnetic Recording) favorable underlayers were studied to encourage perpendicular texture and preferred microstructure. It was found that the epitaxial and small grain growth from the RuAl/TiN underlayer results in small and uniform grains in the FePt layer with perpendicular texture. By introducing the grain size defining underlayers, the FePt grain size can be reduced from 30 to 6 nm with the same volume fraction (9%) of SiO{sub 2} in the film, excellent perpendicular texture, and very high order parameter at 520 deg. C.

36 MATERIALS SCIENCE↗

Growth of (111) oriented NiFe{sub 2}O{sub 4} polycrystalline thin films on Pt (111) via sol-gel processing

Polycrystalline NiFe{sub 2}O{sub 4} (NFO) thin films are grown on (111) platinized Si substrates via chemical solution processing. {theta}-2{theta} x-ray diffraction, x-ray pole figures and electron diffraction indicate that the NFO has a high degree of <111> uniaxial texture normal to the film plane. The texturing is initiated by nucleation of (111) planes at the Pt interface and is enhanced with decreasing film thickness. As the NFO magnetic easy-axis is <111>, the out-of-plane magnetization exhibits improved M{sub r}/M{sub s} and coercivity with respect to randomly oriented films on silicon substrates. The out-of-plane M{sub r}/M{sub s} ratio for (111) textured NFO thin film is improved from 30% in 150 nm-thick films to above 70% in 50 nm-thick films. The improved out-of-plane magnetic anisotropy is comparable to epitaxial NFO films of comparable thickness deposited by pulsed laser deposition and sputtering.

36 MATERIALS SCIENCE↗

FePtCu alloy thin films: Morphology, L1{sub 0} chemical ordering, and perpendicular magnetic anisotropy

Rapid thermal annealing was applied to transform sputter-deposited Fe{sub 51}Pt{sub 49}/Cu bilayers into L1{sub 0} chemically ordered ternary (Fe{sub 51}Pt{sub 49}){sub 100-x}Cu{sub x} alloys with (001) texture on amorphous SiO{sub 2}/Si substrates. It was found that for thin film samples, which were processed at 600 Degree-Sign C for 30 s, the addition of Cu strongly favors the L1{sub 0} ordering and (001) texture formation. Furthermore, it could be revealed by transmission electron microscopy and electron backscatter diffraction that the observed reduction of the ordering temperature with Cu content is accompanied by an increased amount of nucleation sites forming L1{sub 0} ordered grains. The change of the structural properties with Cu content and annealing temperature is closely related to the magnetic properties. While an annealing temperature of 800 Degree-Sign C induces strong perpendicular magnetic anisotropy (PMA) in binary Fe{sub 51}Pt{sub 49} films, the addition of Cu systematically reduces the PMA. However, due to the enhancement of both the A1-L1{sub 0} phase transformation and the development of the (001) texture with increasing Cu content, lowering of the annealing temperature leads to a shift of the maximum perpendicular magnetic anisotropy towards alloys with higher Cu content. Thus, for an annealing temperature of 600 Degree-Sign C, the highest perpendicular magnetic anisotropy energy is found for the (Fe{sub 51}Pt{sub 49}){sub 91}Cu{sub 9} alloy. The smooth surface morphology, adjustable PMA, and high degree of intergranular exchange coupling make these films suitable for post-processing required for specific applications such as for sensorics or magnetic data storage.

36 MATERIALS SCIENCE↗

Microstructural evolution of nanocrystalline nickel thin films due to high-energy heavy-ion irradiation

This initial feasibility study demonstrates that recent advancements in precession electron diffraction microscopy can be applied to nanostructured metals exposed to high displacement damage from a Tandem accelerator. In this study, high purity, nanocrystalline, free-standing nickel thin films produced by pulsed laser deposition were irradiated with approximately 3 Multiplication-Sign 10{sup 14} ions/cm{sup 2} of 35 MeV Ni{sup 6+} ions resulting in an approximately uniform damage profile to approximately 16 dpa. Pristine and ionirradiated regions of the nanocrystalline Ni films were characterized by conventional transmission electron microscopy and precession electron diffraction microscopy. Precession electron diffraction microscopy provided additional insight into the texture, phase, and grain boundary distribution resulting from the displacement damage that could not be obtained from traditional electron microscopy techniques. For the nanocrystalline nickel film studied, this included the growth in number and percentage of a metastable hexagonal closed packed phase grains and the formation of large <001> textured face centered cubic grains. The application of precession electron diffraction microscopy to characterize other nanocrystalline metals, which are being considered for radiation tolerant applications, will permit a comparison of materials that goes beyond the dominant length scale to consider the effects of local phase, texture, and grain boundary or interface information.

36 MATERIALS SCIENCE↗