Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “TOPOGRAPHY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,693 records · Page 94
All sourcesNASA NTRSDOE OSTI
DOE OSTI2013

Boron-doped cadmium oxide composite structures and their electrochemical measurements

Graphical abstract: Conducting nano-fibrous 3% boron doped cadmium oxide thin films were prepared by SILAR and its super capacitive properties were studied. - Highlights: • Samples are of nanofibrous nature. • All samples shows pseudocapacitive behavior. • 3% B doped CdO shows good specific capacitance. • 3% B doped CdO shows maximum 74.93% efficiency at 14 mA/cm{sup 2}. • 3% B doped CdO shows 0.8 Ω internal resistance. - Abstract: Boron-doped and undoped cadmium oxide composite nanostructures in thin film form were prepared onto stainless steel substrates by a successive ionic layer adsorption and reaction method using aqueous solutions of cadmium nitrate, boric acid and 1% H{sub 2}O{sub 2}. As-deposited films were annealed at 623 K for 1 h. The X-ray diffraction study shows crystalline behavior for both doped and undoped films with a porous topography and nano-wires type architecture, as observed in SEM image. Wettability test confirms the hydrophilic surface with 58° contact angle value. Estimated band gap energy is around 1.9 eV. Electrochemical behavior of the deposited films is attempted in 1 M KOH electrolyte using cyclic voltammetry (CV), electrochemical impedance spectroscopy and galvanostatic charge–discharge tests. Maximum values of the specific capacitance, specific energy and specific power obtained for 3% B doped CdO film at 2 mV/s scan rate are 20.05 F/g, 1.22 Wh/kg and 3.25 kW/kg, respectively.

36 MATERIALS SCIENCE↗
DOE OSTI2013

Synthesis and characteristics of spray deposited CuInS{sub 2} nanocrystals thin films for photovoltaic applications

Graphical abstract: - Highlights: • CuInS{sub 2} nanocrystals thin films were synthesized by spray pyrolysis technique. • They are polycrystalline and have chalcopyrite (tetragonal) structure. • They have high absorption coefficient ∼10{sup 4} cm{sup −1} and optimum band gap of 1.55 eV. • They showed excellent opto-electronic properties employable in photovoltaics. - Abstract: Nanocrystalline thin films of CuInS{sub 2}, an attractive absorber material for highly efficient and terrestrial photovoltaic devices, were deposited on ultraclean glass substrates using spray pyrolysis technique. The prepared films were characterized by FESEM, FETEM, HRTEM, AFM, XRD, optical absorption spectroscopy, photoluminescence and current–voltage characteristics. The films exhibit almost smooth, dense and uniform topography; and have nano-sized particles 40–60 nm of CuInS{sub 2}. XRD data show that the films are polycrystalline and have chalcopyrite (tetragonal) structure with crystallite size 45–60 nm. Optical absorption studies show that the band gap of spray deposited CuInS{sub 2} films is 1.55 eV, while absorption coefficient is of ∼10{sup 5} cm{sup −1}. PL spectra have only one peak at 1.43 eV which may be attributed to the excitonic recombination through donor–acceptor impurity levels in the sample. Furthermore, CdS/CuInS{sub 2} heterojunction was also produced onto ITO coated glass substrate to evaluate solar cell parameters such as short circuit current density, open circuit voltage, fill factor and conversion efficiency.

36 MATERIALS SCIENCE↗
DOE OSTI2015

Composite plasma polymerized sulfonated polystyrene membrane for PEMFC

Highlights: • Methyl methane sulfonate (MMS) is used as the sulfonating agent. • The proton conductivity of the membrane is found to be 0.141 S cm{sup −1}. • Power density of fuel cell with styrene/MMS membrane is 0.5 W cm{sup −2}. • The membrane exhibits thermal stability up to 140 °C. - Abstract: This work presents the introduction of an organic compound methyl methane sulfonate (MMS) for the first time in fabrication of polystyrene based proton exchange membrane (PEM) by plasma polymerization process. The membrane is fabricated by co-polymerizing styrene and MMS in capacitively coupled continuous RF plasma. The chemical composition of the plasma polymerized polymer membrane is investigated using Fourier Transform Infrared Spectroscopy which reveals the formation of composite structure of styrene and MMS. The surface morphology studied using AFM and SEM depicts the effect of higher partial pressure of MMS on surface topography of the membrane. The proton transport property of the membrane studied using electrochemical impedance spectroscopy shows the achievement of maximum proton conductivity of 0.141 S cm{sup −1} which is comparable to Nafion 117 membrane. Fuel cell performance test of the synthesized membrane shows a maximum power density of 500 mW cm{sup −2} and current density of 0.62 A cm{sup −2} at 0.6 V.

36 MATERIALS SCIENCE↗
DOE OSTI2022

A systematic study and framework of fringe projection profilometry with improved measurement performance for in-situ LPBF process monitoring

Fringe Projection Profilometry (FPP) is a cost-effective and non-invasive technology that has been shown to measure finer features. Here, in this work, we developed an in-situ FPP method to measure the dynamic topography of powder bed and printed layer during Laser Powder Bed Fusion (LPBF) additive manufacturing (AM) process. A systematic study towards developing a comprehensive framework of LPBF-specific FPP is demonstrated to enhance and evaluate the performance of applying FPP for in-situ LPBF monitoring, including 1) a modified sensor model with localized correction; 2) improved phase unwrapping with FFT filtering 3) quantitative uncertainty analysis; and 4) experimental validation with ex-situ characterization. The developed LPBF-specific FPP system and methods are implemented on a commercial LPBF-AM machine, achieving better accuracy, more robustness, and increased field of view while maintaining sufficient measurement range and decent resolution, in contrast to literature methods. The established FPP framework will facilitate the development of closed-loop control strategies for advancing LPBF based AM.

42 ENGINEERING↗
DOE OSTI2016

Polymer microfilters with nanostructured surfaces for the culture of circulating cancer cells

There is a critical need to improve the accuracy of drug screening and testing through the development of in vitro culture systems that more effectively mimic the in vivo environment. Surface topographical features on the nanoscale level, in short nanotopography, effect the cell growth patterns, and hence affect cell function in culture. We report the preliminary results on the fabrication, and subsequent cellular growth, of nanoscale surface topography on polymer microfilters using cell lines as a precursor to circulating tumor cells (CTCs). To create various nanoscale features on the microfilter surface, we used reactive ion etching (RIE) with and without an etching mask. An anodized aluminum oxide (AAO) membrane fabricated directly on the polymer surface served as an etching mask. Polymer filters with a variety of modified surfaces were used to compare the effects on the culture of cancer cell lines in blank culture wells, with untreated microfilters or with RIE-treated microfilters. We then report the differences of cell shape, phenotype and growth patterns of bladder and glioblastoma cancer cell lines after isolation on the various types of material modifications. Our data suggest that RIE modified polymer filters can isolate model cell lines while retaining ell viability, and that the RIE filter modification allows T24 monolayering cells to proliferate as a structured cluster. Copyright 2016 The Authors. Published by Elsevier B.V. All rights reserved.

Makarova, Olga V.↗
DOE OSTI2026

3D Tomography insights on particle-particle bonding in cold spray

The conditions of the target surface during cold spray affect deformation and bonding. While surface preparation can influence the adhesion of the first particles, such modification is not relevant to the particle-particle interfaces that dominate the growth of a coating. Here we study two-particle Cu stacks produced with a single-particle launch apparatus and compare them to single-particle experiments on a clean polished substrate. Serial cross-sectioning using microtomography permits a systematic evaluation and quantification of bonding at the particle-particle interfaces. We observe that the top particle in the two-particle stacks is much more flattened compared to single impacts on the polished substrate. Although the resulting interfacial area expansion is comparable to that of single impacts at the same velocities, bonding at the particle-particle interfaces is significantly less (never exceeding 18% even around the “optimal” velocity for bonding). Lastly, we find that hydrodynamic jetting, a form of localization known to promote adhesion in cold spray, is hindered for impacts on top of a prior particle deposition. Here, the results point to a need for future studies that separately consider topography and mechanical properties of substrates in the pursuit of optimal bonding.

Bonding↗
DOE OSTI2019

Tau covariance patterns in Alzheimer's disease patients match intrinsic connectivity networks in the healthy brain

According to the network model of neurodegeneration, the spread of pathogenic proteins occurs selectively along connected brain regions. We tested in vivo whether the distribution of filamentous tau (measured with [ 18 F]flortaucipir-PET), fibrillar amyloid-β ([ 11 C]PIB-PET) and glucose hypometabolism ([ 18 F]FDG-PET) follows the intrinsic functional organization of the healthy brain. We included 63 patients with Alzheimer's disease (AD; 30 male, 63 ± 8 years) who underwent [ 18 F]flortaucipir, [ 11 C]PIB and [ 18 F]FDG PET, and 1000 young adults (427 male, 21 ± 3 years) who underwent task-free fMRI. We selected six predefined disease epicenters as seeds for whole-brain voxelwise covariance analyses to compare correlated patterns of tracer uptake across AD patients against fMRI intrinsic connectivity patterns in young adults. We found a striking convergence between [18F]flortaucipir covariance patterns and intrinsic connectivity maps (range Spearman rho's: 0.32-0.78, p < .001), which corresponded with expected functional networks (range goodness-of-fit: 3.8-8.2). The topography of amyloid-β covariance patterns was more diffuse and less network-specific, while glucose hypometabolic patterns were more spatially restricted than tau but overlapped with functional networks. These findings suggest that the spatial patterns of tau and glucose hypometabolism observed in AD resemble the functional organization of the healthy brain, supporting the notion that tau pathology spreads through circumscribed brain networks and drives neurodegeneration.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2018

Environmentally friendly preparation of nanoparticles for organic photovoltaics

Aqueous nanoparticle dispersions were prepared from a conjugated polymer poly[thiophene-2,5-diyl-alt-5,10-bis((2-hexyldecyl)oxy)dithieno[3,2-c:3',2'-h][1,5]naphthyridine-2,7-diyl] (PTNT) and fullerene blend utilizing chloroform as well as a non-chlorinated and environmentally benign solvent, o-xylene, as the miniemulsion dispersed phase solvent. The nanoparticles (NPs) in the solid-state film were found to coalesce and offered a smooth surface topography upon thermal annealing. Organic photovoltaics (OPVs) with photoactive layer processed from the nanoparticle dispersions prepared using chloroform as the miniemulsion dispersed phase solvent were found to have a power conversion efficiency (PCE) of 1.04%, which increased to 1.65% for devices utilizing NPs prepared from o-xylene. Physical, thermal and optical properties of NPs prepared using both chloroform and o-xylene were systematically studied using dynamic mechanical thermal analysis (DMTA) and photoluminescence (PL) spectroscopy and correlated to their photovoltaic properties. The PL results indicate different morphology of NPs in the solid state were achieved by varying miniemulsion dispersed phase solvent.

14 SOLAR ENERGY↗
DOE OSTI2019

Interplay of neutron–proton equilibration and nuclear dynamics

Neutron–proton equilibration in heavy-ion collisions proceeds atop a landscape of deformed topography and large density changes. The rapidly-varying landscape is created by the collision dynamics. The collision dynamics influences the neutron–proton equilibration, but just as importantly the different migration of the protons and neutrons influences the dynamics. To fully appreciate either the reaction dynamics or the neutron–proton equilibration, one must understand both. This review explores decades of work on both topics, and highlights the connections to the nuclear equation of state in nuclear experiment, theoretical prediction, and astrophysical observation.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

New chronological constraints on the history of the Kalahari Group from the Upper Ugab Valley, Namibia

The sedimentary fill of the Kalahari Basin, which extends across several countries in southern and central Africa, records landscape evolution processes and holds archeological evidence of early hominid occupation. Recent studies have demonstrated that the majority of the Kalahari Group sediments were deposited between the Pliocene and the recent present. However, due to limited access to natural outcrops in the flat Kalahari topography, the chronology of the sequence, mostly its earlier part, is not well constrained.

Cosmogenic nuclides burial dating↗
DOE OSTI2021

Climate reconstructions for the Last Glacial Maximum from a simple cirque glacier in Fiordland, New Zealand

Mountain glacier records offer important constraints on the timing and magnitude of climate variability during the last glacial cycle. Existing moraine chronologies from the central Southern Alps indicate maximum ice extent was achieved during marine isotope stages 3–4, followed by repeated advances of similar, but gradually declining extent during marine isotope stage 2, until onset of the glacial termination. Questions remain over the precise role of climate in driving these changes, as most existing moraine chronologies come from large, complex former valley glacier systems, where non-climatic influences such as changing bed topography and proglacial lake formation may have influenced glacier length changes. In this work, we address this problem via a new cosmogenic 10Be chronology and equilibrium line altitude reconstruction from a cirque glacier situated in Fiordland, New Zealand. Our chronology shows moraine deposition at 32 ± 11 ka, 18.7 ± 0.2 ka, 18.1 ± 0.1 ka, and c. 17.2 ± 0.3 ka. The simple geometry of the former glacier supports the role of climate in driving a net decline of regional ice volume during marine isotope stages 3–2. Close spacing and good preservation of the 19–17 ka moraines permits 2D glacier reconstruction which suggests the equilibrium line altitude remained depressed by c.1130 m (equivalent to 5.8 ± 0.6 °C colder than present) during this interval. Onset of warming after 17.2 ± 0.2 ka is consistent with climate proxy evidence for a sustained southward shift in the southern westerly winds, which may have promoted deglaciation via shifting ocean currents and promoting increases in atmospheric carbon dioxide.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Disentangling error structures of precipitation datasets using decision trees

Characterizing error structures in precipitation products not only facilitates their proper applications for scientific and practical purposes but also helps improve their retrieval algorithms and processing methods. Despite the fact that multiple precipitation products have been assessed in the literature, factors that affect their error structures remain inadequately addressed. By interpreting 60 binary decision trees, this study disentangles the error characteristics of precipitation products in terms of their spatiotemporal patterns and geographical factors. Three independent precipitation products - two satellite-based and one reanalysis datasets: the Integrated Multi-satellitE Retrievals for GPM (Global Precipitation Measurement) late run (IMERG-L), Soil Moisture to Rain-Advanced SCATterometer (SM2RAIN-ASCAT), and the Modern-Era Retrospective analysis for Research and Applications, Version 2 uncorrected precipitation output (MERRA2-UC), are evaluated across the contiguous United States from 2010 to 2019. Here, the ground-based Stage IV precipitation dataset is used as the ground truth. Results indicate that the MERRA2-UC outperforms the IMERG-L and SM2RAIN-ASCAT with higher accuracy and more stable interannual patterns for the analysis period. Decision trees cross-assess three spatiotemporal factors and find that the underestimation of MERRA2-UC occurs in the east of the Rocky Mountains, and SM2RAIN-ASCAT underestimates precipitation over high latitudes, especially in winter. Additionally, the decision tree method ascribes system errors to nine different geographical characteristics, of which the distance to the coast, soil type, and DEM are the three dominant features. On the other hand, the land cover type, topography position index, and aspect are three relatively weak factors.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Next generation Arctic vegetation maps: Aboveground plant biomass and woody dominance mapped at 30 m resolution across the tundra biome

The Arctic is warming faster than anywhere else on Earth, placing tundra ecosystems at the forefront of global climate change. Plant biomass is a fundamental ecosystem attribute that is sensitive to changes in climate, closely tied to ecological function, and crucial for constraining ecosystem carbon dynamics. However, the amount, functional composition, and distribution of plant biomass are only coarsely quantified across the Arctic. Therefore, we developed the first moderate resolution (30 m) maps of live aboveground plant biomass (g m −2 ) and woody plant dominance (%) for the Arctic tundra biome, including the mountainous Oro Arctic. We modeled biomass for the year 2020 using a new synthesis dataset of field biomass harvest measurements, Landsat satellite seasonal synthetic composites, ancillary geospatial data, and machine learning models. Additionally, we quantified pixel-wise uncertainty in biomass predictions using Monte Carlo simulations and validated the models using a robust, spatially blocked and nested cross-validation procedure. Observed plant and woody plant biomass values ranged from 0 to ∼6000 g m −2 (mean ≈ 350 g m −2 ), while predicted values ranged from 0 to ∼4000 g m −2 (mean ≈ 275 g m −2 ), resulting in model validation root-mean-squared-error (RMSE) ≈ 400 g m −2 and R 2 ≈ 0.6. Our maps not only capture large-scale patterns of plant biomass and woody plant dominance across the Arctic that are linked to climatic variation (e.g., thawing degree days), but also illustrate how fine-scale patterns are shaped by local surface hydrology, topography, and past disturbance. By providing data on plant biomass across Arctic tundra ecosystems at the highest resolution to date, our maps can significantly advance research and inform decision-making on topics ranging from Arctic vegetation monitoring and wildlife conservation to carbon accounting and land surface modeling.

Climate change↗
DOE OSTI2023

Nepal Himalaya offers considerable potential for pumped storage hydropower

There is a pressing need for a transition from fossil fuel to renewable energy to meet the increasing energy demands and reduce greenhouse gas emissions. The Himalayan region, with its unique topography and abundant water resources, offers substantial renewable energy potential, particularly through hydropower generation. However, the current exploitation rate is low owing to the predominance of run-of-river hydropower systems to support the power system. The utility-scale storage facility is crucial in the load scenario of an integrated power system to manage diurnal variation, peak demand, and penetration of intermittent energy sources. In this study, we assess the potential of pumped storage hydropower across Nepal, a central Himalayan country, under multiple configurations by pairing lakes, rivers, and available flat terrains. We then identify technically feasible pairs from those of potential locations. Infrastructural, environmental, operational, and other technical constraints govern the choice of feasible locations. Here, we show that 42% of the theoretical potential of 3000 GWh is technically feasible. We find the flat land-to-river configuration more promising than other configurations. Our findings provide insight into the potential of pumped storage hydropower and are of practical importance in planning sustainable power systems in the Himalayas and beyond.

13 HYDRO ENERGY↗
DOE OSTI2016

Morphological study of borosilicate glass surface irradiated by heavy ions

Borosilicate glass is a candidate material for radiation waste formation and other optical applications in various fields. To understand the radiation effect of borosilicate glass, heavy ion (Ar q+ , Kr q+ and Xe q+ ) irradiations were used to simulate the alpha and recoiled nuclei irradiations in this study. The surface morphology of glass has been compared to ion irradiation doses and ion energies. The surface topography evolution of irradiated samples is characterized by optical microscopy, atomic force microscopy (AFM), transmission electron microscopy (TEM) and secondary ion mass spectrometry (SIMS). Micro-bumps are observed on the sample surface after irradiationwith 5 MeV Xe q+ over 5 × 10 13 ions·cm -2 . The size and density of the bumps increaseswith increasing irradiation dose. At a lowdose, bumps are on the nanometer (nm) scale and rather rare.While the dose is higher than 9 × 10 15 ions·cm -2 , the size of bumps is on the scale of a few microns, and the density is saturated. However, the height of the bumps increases froma fewnmto over 150nmwith further irradiation. The distribution of micro-bumps is nearly homogeneous. The bumps are condensed and swell up, and there is no crystallized structure according to the TEMdiffraction pattern. Elementmigration and concentrations are observedwith SIMS imaging. The arrayed micro-bumps are a new finding, and they might be used to change the surface properties. Bump formation is caused by phase separation, and volume swelling is induced by ion irradiation.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Designing energy dissipation properties via thermal spray coatings

The coefficient of restitution is a measure of energy dissipation in a system across impact events. Often, the dissipative qualities of a pair of impacting components are neglected during the design phase. This research looks at the effect of applying a thin layer of metallic coating, using thermal spray technologies, to significantly alter the dissipative properties of a system. We studied the dissipative properties across multiple impacts in order to assess the effects of work hardening, the change in microstructure, and the change in surface topography. The results of the experiments indicate that any work hardening-like effects are likely attributable to the crushing of asperities, and the permanent changes in the dissipative properties of the system, as measured by the coefficient of restitution, are attributable to the microstructure formed by the thermal spray coating. Furthermore, the microstructure appears to be robust across impact events of moderate energy levels, exhibiting negligible changes across multiple impact events.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Nanoscale friction of CVD single-layer MoS 2 with controlled defect formation

Two-dimensional (2D) layered nanomaterials such as graphene, molybdenum disulfide (MoS 2 ), or tungsten disulfide offer a promising solution in areas of solid-state lubrication, due to their excellent mechanical properties as well as low friction. However, defects can influence their friction and reduce their superior tribological properties. Thus, it is crucial to understand the effects of defects on sliding behavior in 2D nanomaterials, to foster a functional strategy for utilizing 2D nanomaterials as solid-state tribological films. In this study, frictional effects of defects, grain boundaries, and atomic-scale structural defects were explored on chemical vapor deposition (CVD) grown single layer MoS 2 . Selective patterning of defects into MoS 2 was accomplished via controlled irradiation of helium ions with varying ion doses. The friction of MoS 2 was characterized by friction force microscopy (FFM) and was found that friction depends on the defect formation controlled by helium ion irradiation. This approach offers a correlation between surface topography, defects and friction. Understanding the relative friction of MoS 2 in the presence of different levels of defects is foundational to studying tribological properties of a single layer MoS 2 at both nanoscales and macroscales.

36 MATERIALS SCIENCE↗